* Refactor lets split to use split common code
* Refactor lets split to use split common code
* Build fixes for OLED_sample keymap
* Build fixes for OLED_sample keymap - attempt to reduce firmware size
* preonic-kuatsure: ctrl / esc in one key + hello ` again
* preonic-kuatsure: remove esc on lower
* preonic-kuatsure: programmy macros
* user-kuatsure: turn off console all the time
* preonic-kuatsure: auto shift, but only for numbers
* preonic-kuatsure: remove programmery macros
* preonic-kuatsure: move braces, parens, etc over to raise
backwards compat
move &*() on lower
* preonic-kuatsure: stop with the full rep of game layer
* Add tsangan bottom row hhkb layout for dz60
* Add crd's tsangan hhkb layout for dz60
* Resort to native key aliases when they exist
* Update crd's dz60 ansi keymap to match updates for hhkb fn layer
* Add tsangan hhkb layout to dz60 info.json for KLE
* Fix JSON nesting in dz60 layouts block
* Minor adjustments to crd layouts to make them more consistent
* Update layout naming to 60_tsangan_hhkb
* Hacker Dvorak
Programmer Dvorak based layout for the Ergodox EZ.
* Address drashna comments.
* Fix RGB and drop OSL for MO.
* Add gulp file to automate development.
* Fix gulpfile.
* Caps, num and scroll lock indicators.
* Fix scroll lock.
* Add final RGBKB Sol firmware
* Apply suggestions from code review
Apply most of the changes noroadsleft has suggested
Co-Authored-By: Legonut <legonut3@gmail.com>
* Cleanup readme
* Cleanup keymaps per @noroadslefts suggestions
* Remove eeproms, use set_single_persistent_default_layer
* Suggestions from @noroadsleft and @drashna
some small cleanup
* Change RGB_SMOD to RGB_RMOD
* fix RGB_SMOD
* Apply suggestions from code review
Remove redundant lines
Co-Authored-By: Legonut <legonut3@gmail.com>
* add initial support for hadron ver3
* add initial support for hadron ver3
* pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display
* initial work on OLED using qwiic driver
* early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality
* moved oled defines to config.h and added ifndef to micro_oled driver
* WORKING :D - note, still work in progress to get the start location correct on the 128x32 display.
* added equation to automatically calculate display offset based on screen width
* adding time-out timer to oled display
* changed read lock staus via read_led_state
* lock indications fixes
* Added scroll lock indication to oled
* add support for DRV2605 haptic driver
* Improve readabiity of DRV2605 driver.
-added typedef for waveform library
-added unions for registers
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Fixes for PR
* PR fixes
* fix old persistent layer function to use new set_single_persistent_default_layer
* fix issues with changing makefile defines that broken per-key haptic pulse
* Comment fixes
* Add definable parameter and auto-calibration based on motor choice
* keymap + alpha
* some fixes
* keymap + alpha
* some fixes
* drashna changes
* linked main Alpha repo in keyboards/alpha readme
* missed a spot
* there's another function called FUNC lol
* keymap + alpha
* some fixes
* keymap + alpha
* drashna changes
* Fixed include
* Revert "Fixed include"
This reverts commit ea92f261f86d8433eab313cde498adca1682a006.
* messed up my git, fixed include
* handwired/atreus50: refactor
- layout macro renames:
- KEYMAP is now LAYOUT
- COMPACT_KEYMAP is now LAYOUT_kc
- keymap updates:
- both keymaps now use #include QMK_KEYBOARD_H
- removed redundant KC_TRNS and KC_NO definitions
- default keymap now uses LAYOUT macro instead of LAYOUT_kc
* handwired/atreus50: readme cleanup
Reformatted the readme to be more closely aligned to current QMK
template, and fixed some typos/grammar.
* handwired/atreus50: Configurator support
* add 60_hhkb support
* add qmk configurator support for the new 60_hhkb layout
* allow community layout support for the 60_hhkb
* fixup readme to adhere to new QMK standards
* handwired/promethium: refactor
- config.h files
- updated to use #pragma once
- removed redundant config.h includes
- layout macro moved from config.h to promethium.h
- layout macro renamed from KEYMAP_CUSTOM to LAYOUT
* handwired/promethium: Configurator support
* Add support for S7 Elephant
A high-end 70% custom keyboard designed and produced by jacky from Geekhack.
* Polish S7 Elephant code
Implement drashna's suggestions:
- specify bootloader
- remove unnecessary defines
- use led_set_user() for LED logic
* Correct info.json and s7_elephant.h
Correct info.json and s7_elepant.h to follow QMK convention and fix a
missing curly bracket.
* Refactored M6-B to use Zeal60 RGB backlight code
* Fixed M6-B LED co-ordinates
* Minor changes to RGB config for Zeal65
* Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A
* Macro implementation
* Implemented macros, API protocol version 8, RGB backlight fixes
* Improved radial effects for M6-B
* Fixed undefined references when building an RGB keyboard after M6-A
* handwired/arrow_pad: layout macro and keymap refactor
- Layout macros moved from the keymaps to arrow_pad.h.
- LAYOUT_pad21 refactored to only accept keys that are physical present (no KC_NO entries required in keymap)
- Keymaps now use #include QMK_KEYBOARD_H
- Keymaps refactored to use process_record_user function (from action_get_macro)
* handwired/arrow_pad: Readme cleanup
Fixed the make commands and updated the layout macro.
* handwired/arrow_pad: Configurator support
* Fix reversed bool check in layer_state_set
* Add Quefrency 65 for a friend
* Add Ergodox EZ Glow keymap
* Add RGB Matrix Code
* Further changes to rgb matrix ErgoDox EZ
* Update bjohnson keymaps
* Fix CRKBD display
* Overhaul to corne keyboard
* Narrow scope for keylogger
* Minor layout tweaks to Corne Keyboard
* additional CRKBD tweaks
* Minor tweaks to CRKBD
* Add all characters for keylogger
* Ergodox EZ Glow overhaul
* Fix Ergodox EZ Glow layer colors
* Increase Tapping Term for Corne Keyboard
* Fix unicode-ish
* Revert some changes
* Add layer specific lighting effects
* Some minor tweaks to ergodox glow config
* revert changes to ergodox files
* Update Glow readme
* Add more tapping term defines
* Fix changes
* Fix ergodox keymap
* Hopefully fix sleeping
* Disable layer indications if rgb matrix is disabled
* Add support for sleeping and rgb layer change toggle to ergodox ez glow
* Make RGB Layer Indication Great Again
* Make Unicode Great Again
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove old EEPROM Reset keycode
* Enable ortho_4x12 community layouts for lets_split_eh
* Keymap build fixes now that ortho_4x12 is enabled
* Keymap build fixes now that ortho_4x12 is enabled
* compiles but is not working
* still testing 5291
* compiles but is not working
* still testing 5291
* fixed a but in the layout (reversed key order in row)
* compiles but is not working
* still testing 5291
* fixed a but in the layout (reversed key order in row)
* fixed some issues
* doumentation needed
* doumentation needed
* documentation needed
* documentation needed
* Update readme.md
documentation
* Update readme.md
i dislike markdown <_>
* merge preperation
* Enable 4x4 and 5x5 community keymap support
* Pull 4x4 community keymap fixes from @noroadsleft
* Build fixes for guidoism keymap - move keymap to layouts/community/planck_mit as it uses the LAYOUT_planck_mit macro
* remove clmk and dvrk and backlight; switch esc and enter to be modtap; add meh key
* change songs
* space cadet; move enter; move '"; move pgup pgdn
* remove extra songs
* update from noahfredrick keymap
* make it easier to type ../../thing/*/*
* move pipe
* requested changes
* add interrobang support
* add shift-insert to raise-v and lower-v, move pipe to raise-/lower-n
* Adding my new keymap, based of xd75, with leds enabled via the rules.mk file
* cleaned up the rules file
* Per Change Requests: removed deprecated functions along with updated the map to use the layout macro instead of raw matrix
* Fix firmware to work with latest Wilba changes (i.e. dynamic keymap) and M60a.
* Get back RGB Backlight codes.
* More tweaks.
* Update users/talljoe/rules.mk
Co-Authored-By: Talljoe <jwasson+github@gmail.com>
* Include both base keyboards
* Merge the keymap
* Merge the configs
* Add wiring diagram for clarity of documentation
* Merge rules
* Merge keyboard sources
* Change names to compile
* Update documentation to suit
* Add qwerty layout to 108keyTrackpoint
* Separate the dvorak standard layout from a media focused one
* Update documentation to reflect new keymaps
* [style] Add empty lines at ends of files
* [style] Meet current QMK style guide
* Bring READEME closer to the QMK template
* [style] Change all "108keyTrackpoint" to "108key_trackpoint"
* [style] Use "LAYOUT" instead of "KEYMAP"
QMK terminology has changed
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Add two spaces after maintainer in README
This is required to render properly
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Remove redundant line
"PREVENT_STUCK_MODIFIERS" is default on for QMK
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Change include of keymaps to use QMK_KEYBOARD_H
This includes automatically
* Update make rules to match template
* Change from KC_MENU to KC_APP
The button functionality actually wanted is the context menu key
* [style] Change "dvorakMedia" to "dvorak_media"
* Update README to reflect minor changes
The debounce filtering reports a key/switch change directly, without any extra delay. After that the debounce logic will filter all further changes, until the key/switch reports the same state for the given count of scans.
So a perfect switch will get a short debounce period and a bad key will get a much longer debounce period. The result is an adaptive debouncing period for each switch.
This value defines how often the same key/switch state has to be detected in successive reads until the next key state can be reported.
In other words this value defines the minimum debouncing period for a switch.
* Add TKL JIS layout for Pegasus Hoof
Tested with a JIS Majestouch 2 TKL
* Add default_jis keymap for Pegasus Hoof
* Remove unnecessary keycode definition
* Remove legacy fn_actions in favor of MO(1)
* Remove unnecessary build directive
* fix to prime o keymap
* changed ortho keymaps
* added some symbols to lower layer
* set lower to be a higher layer than raise
* added split layout option with center numpad to prime_o keymap
* added some gaming functionality
* added alt f4 ortho keymaps and userspace
* fixed small error
* fixed arrow keys and left control
* added right shift
* latest version
* reverted arrow keys
* edited readme
* added osu layer
* updated osu layout
* updated osu layout
* added full arrow keys to osu layout
* in case i mess up creating macros
* added the best meme key in the world
* added plover steno layer
* updated boy314 layout
* removed unused layers
* added boy314 xd75 layout, inspired by preonic layout
* added boy314 xd75 layout, inspired by preonic layout
* version 2 of boy314's xd75 layout
* added readme notes
* updated readme for boy314 xd75 layout
* qwerty support, brackets on bottom row, caps lock underglow
* fixed readme/
* small changes to allow merging
* minor changes to format
* fixed up default readme
* added numpad and tweaked bottom row
* Move 68keys keymap to mf68 folder
* Remove 68keys keyboard now its been migrated to mf68 keymap
* Migrate 68keys build config to mf68 keymap overrides
* Add 412-64 keyboard firmware
It's pretty barebones for now, but the Model 00 is also a pretty barebones machine. Model 01 won't be better, but plenty of pins exist for things like LEDs on Model 02.
* MANU/PROD ID changes.
Changed around the MANUFACTURER and PRODUCT IDs to be more polite when viewed in qmk toolbox.
* Fixing PROD again.
For the love of all that is good and holy, that was ugly. This new one looks better. This stuff matters to me for some reason.
* Yep, updating MANU again.
There we go. That's better - From my name to my "design firm".
* Update keyboards/412_64/keymaps/default/keymap.c
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Refactored M6-B to use Zeal60 RGB backlight code
* Fixed M6-B LED co-ordinates
* Minor changes to RGB config for Zeal65
* Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A
* initial commit for kbd67 keyboard
* add in a standard matrix
* get the correct matrix for layout_all
* add a layout_65_ansi LAYOUT macro
* get a default keymap in
* add caps lock led support
* fix formatting of my name in the comments
* add QMK Configurator support
* turn on bootmagic
* Starting point for blue pill based practice60
* Changes
* add
* try raw bin no botloader
* swap back to bootloader version
* edit
* Remove debug LED flash
* Disable JTAG to open up B3 and B4
* Add led backlight support (no breathing yet)
* Update matrix for correctness
* RGB Underglow working in a very simple state
* not as bright
* Move to handwired
* revert ChibiOS_Test changes
* Changes based on PR comments
* Address PR comments v2
* Move files
* Fix up screen off timer of helix
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty
* Changing referenIng incorrect constant name
* OLED_ENABLED => SSD1306OLED
* Improve internal processing of process_record_kb()
* Use the return value of process_record_gfx()
* Move a include statement into #ifdef block
Move #include "ssd1306.h` statement into #ifdef block
* Move process_record_kbI()
Move process_record_kb() from helix.c to rev1.c/rev2.c/pico.c
* Move process_record_kb()
* fix about screen off timer
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty.
* Revert "fix about screen off timer"
This reverts commit 3d175f2340c14250a71af78afec5a1e890d9f4e7.
* Fix up screen off timer of crkbd
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty.
* Fix up screen off timer of helix
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty
* Revert "Fix up screen off timer of helix"
This reverts commit f0efb82443a7dc34b75579359b0514e8bfa51100.
* Improve internal processing of process_record_kb()
* Use the return value of process_record_gfx()
* Fix a indent
Fix a indent
* Remove unnecessary re-definitions for XXXXXXX and _______
* Update 6lit to use KC_NO in layout macros
* Update rules.mk to follow current template
* Remove use of deprecated function action_get_macro - unused and contents were from old template
* Remove use of deprecated function action_get_macro - all code was commented out
* Remove use of deprecated function action_get_macro - convert macro to use process_record_user
* Convert keymap to consistent use of _______
* fix use of old style header guards
* Swap KC_NO for XXXXXXX macro since the swap to the macro for KC_TRANS
* Resolve use of ?= in rules.mk files
* Remove duplication of rules.mk and config.h in gherkin mjt keymap
* Remove unnecessary #includes
* Align layout macros so foobar can use gherkin keymaps
* Align 6lit layout macros with foobar
* Remove ifndef QUANTUM_DIR from keymaps
* Initial 25 port
* Initial 25 port - fix info.json and hand_swap_config
* Review comments - fix layout macros, copyright comments, and duplicated use of layering macros
* initial commit
* put my name everywhere
* get the switch matrix correct
* add a basic keymap
* use a better LAYOUT macro
* update readme
* Add QMK Configurator support
* Added support for backlight , and a UK iso layout
Added support for backlight , and a UK iso layout. Now uses the SPLIT_KEYBOARD #define rather than relying on lets split
* Update keyboards/diverge3/keymaps/isoUK/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/isoUK/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Simplified the lower layer
Simplified the lower layer
* dir rename to snake case
dir rename to snake case
* changed dir case
changed dir case
* Update keyboards/diverge3/rules.mk
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* aligned and tidyied up
aligned and tidyied up
* dlg's keymap
* fix list order
* remove cruft
* pragma
Co-Authored-By: dlgoodr <dlg@dsrw.org>
* turn on bootmagic, enable swapping ` and Esc while I figure out which compromise is least bad
* Initial move of 40percent.club boards to common parent folder.
* Refactor readme files to be consistent
* Refactor readme files to be consistent - fix make command examples.
* Refactor readme files to be consistent - align readme filenames.
* Refactor readme files to be consistent - fix repo url.
* Disable Community keymap builds as they are currently failing due to missing functionality
* Move more of 40percent.club boards to common parent folder.
* Refactor readme files to be consistent - align readme filenames.
* Refactor readme files to be consistent - fix make command examples.
* Preliminary 30wer firmware. Not tested on real board yet.
* Added a layer to default 30wer keymap.
* Wrote readme for 30wer.
* Added 30wer info.json.
The new simple API can be selected.
Previous version, can select two way.
* use old API (compatible with let's split serial.c)
* use new API (multi-type transaction)
This version, can select three way.
* use old API (compatible with let's split serial.c)
* use new API (single-type transaction)
* use new API (multi-type transaction)
There is no change in the code generated by this change.
* Use Magic+Esc for entering bootloader mode
* Expand rules.mk
* Improve FN_RCTL tap dance
* Avoid one-line if statements
* Add PROGMEM to keymaps definition
* td_fn_rctl_* → td_fn_rctrl_*
* Fix FN_RCTL tap dance bug when count is 4, 8, 12 etc.
* Add ACTION_TAP_DANCE_DOUBLE_MODS
* Rearrange/rename keycode defines
* Use RAL_RGU and RCT_RSF in keymaps
* Replace keymap ASCII art with box drawing characters
* Add FN_FNLK and use it
* Set Unicode input mode in eeconfig_init_user instead of matrix_init_user
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Add underglow controls to dz60 function layer
* Fixing merge conflicts
* Fixing exectable bits changed during merge
After further testing and feedback from others, the bottom row matrix was incorrect. Also RGB number was incorrect (I was tired when building this, really shouldn't do that).
* converter/adb_usb: Configurator support
Note: LAYOUT_ext_ansi has a blank space between the Spacebar and the
Right Alt/Option key when loaded in the Configurator. This is
deliberate.
Stock Apple Extended Keyboards and AEK IIs send the scan code for Left
Command when either Command key is used. (This is noted already in the
readme.) That being the case, the Command keys cannot be assigned to
different functions. Whichever keycode is placed on Left Command will be
used for both Command keys.
* converter/adb_usb: adb_usb.h cleanup
- replaced KEYMAP_COMMON_H with ADB_USB_H
- white space changes for visual alignment in LAYOUT_ext_ansi macro
* port over Rozakiin https://github.com/Rozakiin/Noxary_Firmware/tree/master/noxary_x268
* rename LAYOUT to LAYOUT_65_ansi default layout
* add configurator support
* add community layout support
* put Rozakiin's name everywhere
* update readme
* problems with the 65_ansi keymap to be diagnosed later
* Keymap: add jyh levinson keymaps
remove tap dance number keys due to sluggish responses
simplify I2C configuration
reverse hyper and meh positions
reduce tapping term to allow fast typing with mod tap space keys
remove Alt hold on right space key. too many false touches.
add vim-style arrows (hjkl) on asdf; semicolon/quote on raise
correct documentation string for jyh levinson layout
add alternative levinson layout for jyh
more inspiration from atreus keyboard. keeps shift in the expected
places. reduces number of layers. puts numpad layout easily
accessible. places important keys on palms and meta keys on top
corners for xmonad.
correct layer switching in jyh2 levinson layout
I was getting stuck on the numpad layer because the numpad hold key
was remapped once the layer was activated. Bad idea. Minor other
refinements.
use curly bracket { instead of brace [ on raise layer
add RGB keys on adjust layer
bootmagic key is confusing. turn it off.
try out permissive hold setting to make mod-tap better
remove hold for right control on quote key. too many mistakes
turn off permissive hold. it was causing unexpected behavior
enable rgb underglow animations
add make it pink/blue key to levinson layout
prevent stuck modifiers in jyh2 levinson keymap
* fix up deprecated code after code review
* remove PREVENT_STUCK_MODIFIERS because it is default
Co-Authored-By: yamad <jyamada1@gmail.com>
* added initial config files for vinta
* added readme
* changed product id and device ver
* fixed keymap illustration
* updated rules.mk to enable more commands
* removed a bunch of pre-code text; changed some grammar woopsies
* removed bootmagic lite
* updated developer's note
* updated readme.md
* Initial commit of guidoism
* created movement layer
* movement layer works!
* removed unnecessary layers
* moved enter key up and recreated caps lock
* cleaned up
* num pad
* checkpoint
* checkpoint
* checkpoint
* Added num pad
* changed max power draw so i can use this on ipad
* move around quotes
* added tri layer for a homed numpad
* moved layout to new style
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* added keys to unicode conversion
* removed adjust layer since its not used anymore
* moved esc to seperate key
* tweaked python
* checkpoint
* new code put into function
* new code put into function
* cleanup
* cleanup
* new code works perfect
* removed old code
* removed old code
* generate_c.py now replaces code within keymap.c
* added function layer
* updated readme
* updated readme
* updated readme
* updates readme
* updates readme
* updates readme
* Tweaks based on CR
* Remove old guidoism
* Use MO(_FUNCTION) directly
* layer locked breathing, layer changed brighter leds
* move config for tapping term into config.h
* Respect LED off even with layer indicators, add readme and update config
to new standard
* update Readme with note about both sides of board being required to flash
When comparing the pins in this file to the Ergodox Infinity schematic, it seems that the first section is describing the rows and the second section is describing the columns.
- config.h deleted (file was redundant)
- layout macro LAYOUT_JD45 removed (identical to new macro LAYOUT)
- ../../config.h include line redundant due to past changes to build script
- keymap.c
- updated to use macro LAYOUT
- redundant KC_TRNS and KC_NO definitions removed
- config.h
- updated to more-preferred format
- layout macro LAYOUT_JD45 removed (identical to new macro LAYOUT)
- keymap.c
- updated to use macro LAYOUT
- redundant KC_TRNS and KC_NO definitions removed
The macro that was LAYOUT prepended KC_ to all the keycode arguments, preventing the Configurator from working with the JD45. This macro is now LAYOUT_kc.
The macro LAYOUT is a more-standard macro.
Switch identifiers have changed throughout. Format is k<row><column>.
* Added my Mechmini2 layout to qmk.
* Added more info to the readme.
* Made changes.
* Update keyboards/mechmini/v2/keymaps/lbibass_625_space/keymap.c
Co-Authored-By: lbibass <ewdries02@gmail.com>
* Update keyboards/mechmini/v2/keymaps/lbibass_split_space/keymap.c
Co-Authored-By: lbibass <ewdries02@gmail.com>
* Added my(194h) atreus62 keymap
* Fixed what noroadsleft remarked in my pull request, hopefully got it all.
* Followed drashna's suggestion.
* Removed unused functionality from my keymap, added tap dance æøå and changed Layer 1 and Layer 2
* Removed unused functionality from my keymap, added tap dance æøå and changed Layer 1 and Layer 2
* change window focus shortcuts
* hangul
* macos goodness
* re-arrange tab keys
* remove tab switching keys
* left hand func
* glorious macro pad
* workspace rotation keys
* tabbing hotkeys
* left hand tab change keys
* SEND_STRING("!") on KC_EXLM
* use SEND_STRING for all shifted symbols
* SEND_STRING even for non shifted symbols so they play nicely with the shifted ones
* Made DZ60 layout with calculator
* Cleaned up and commented, preparing to fix bug with negative in front of open parenthesis as first character
* Fixed bug where negative sign infront of parenthesis as first character was parsed incorrectly
* Made a better solution for the bug from the previous commit
* Modularized and added a userfile so that this code can be used on various keyboards, found in doogle999
* Removed commented code from keymap
* Made the layer that is used for calculations a define so that it can be changed per keyboard
* Made the readme
* Made the readme in the correct place
* Revert "Made the readme in the correct place"
This reverts commit 7f8b59ed9e59c77401a48be3a7ac1e8fd8e84e32.
* Manually synced with qmk upstream
* Stopped repeat, made keys print character that they are defined as rather than what the keyboard wants them to do
* Added support for numpad, might make all keycodes custom so that there is no need to change doogle999.c if you want to change the keycode that is associated with a function, also made numpad automatically activating an option
* Fixed some bugs with backspacing, updated the readme
* Fixed some bugs with numlock turning on at the wrong times when a shift key was down
* Made the return to layer work automatically instead of just forcing it to layer 0
* fixes and style changes, 20% decreased binary size
* Fixed some bugs with double printing and compilation errors on my side
* Fixed bug with exceeding the buffer size
* Removed changes that added const-ness
* Made changes so that backspace does not repeat to remove backspace bugs, still some bugs with recalculating without having typed anything
* Fixed obo error with calc main loop
* Made includes more accurate in keymap for dz60
* Moved flags to user makefile
* keymap for 1upkeyboards/sweet16 multilayers rgb lighting and tapdance
* Update config.h
typo
* cleanup
Co-Authored-By: ridingintraffic <michael.j.fettis@gmail.com>
* layers are using layout macro
replaced the include guard (the ifndef, define, and endif at the end) with just #pragma once
changed undergrow to use layer-change-code
emoji macros are using send_hex_code_string
cleaned up the includes
* tap() removed
maxtrix_scan_user updated
conf.h cleanup
* Matrix/keymap refactor
- Deleted `KC_KEYMAP` macro
- Renamed `KEYMAP` macro to `LAYOUT_ortho_4x12`
- Default keymap updated to current QMK standards
- #include QMK_KEYBOARD_H
- Refactored from `KC_KEYMAP` to `LAYOUT_ortho_4x12` macro
- `action_get_macro()` deprecated in favor of `process_record_user()`
`rules.mk` *not* updated to include `LAYOUTS = ortho_4x12` because I have no idea if and how that works on a split and/or wireless keyboard.
* readme cleanup: markdown formatting
* Add Configurator support
* added support for ortho_4x12 layout
* Macro and readme updates
Macros updated to use `KC_NO` directly.
Readme updates and cleanup.
* Keyboard: initial support for XD87
* Add row/col pin configuration for XD87 PCB
* Add default ISO layout
* Fix incorrect KC in default_tkl_iso
The KC_NUBS is duplicated in the TKL ISO layout.
Compare with the fullsize ISO which has a KC_NUHS
in the corresponding place.
* Add support for community layouts
* Add TKL ANSI layout
* Enable TKL ISO/ANSI community layout
* Fix LAYOUT_all
* Configure backlighting for XD87
* Various documentation changes
* Converter: add XT USB converter from TMK
* Converter: port TMK code for USB converter to QMK
* Apply requested changes after code review by @drashna
- use "pragma once" instead of include guards
- use LAYOUT instead of KEYMAP
- allow customisation with matrix_init_user() and matrix_scan_user()
- set BOOTLOADER instead of BOOTLOADER_SIZE
- Add XT_ENABLE to OPT_DEFS
* Remove unnecessary lines
* Matrix/keymap refactor
White space and readability updates
* Configurator support
Added info.json file.
* Readme update
Markdown formatting
* Add support for ortho_4x12 keymaps
* Added planck_mit layout support
* Disable SWAP_HANDS_ENABLE for zlant:wanleg keymap
* Disable BACKLIGHT_ENABLE for zlant:bakingpy keymap
* an attempt at own layout
* typematrixed dvorak
* columns shifted
columns shifted out, second pinky column moved to the inside.
* Update users/romus/romus.h
* code cleanup
Changes requested by Drashna + Tap Dance enabled
* Fixed EOF
Fixed the no newline at the end of file alert.
* rgblight fight eeprom writes
* rgb code simplification
* Update users/romus/README.md
* Update quantum/keymap_extras/keymap_slovenian.h
* Main folder
Main folder with some changes like the base layout and matrix for uploading in a future to the qmk repositorie
* First Commit
Firsts non previously commited changes:
-Changed to keyboards/handwired
-Basic credit to Xydane
-70% Layout
* Modified file structure for several keyboards
As I don't want to create several folders and overcrowd the main folders I made a few modifications to being able of configure several keyboards as revisions of the main keyboard.
Added a second variant.
Compiling tests went right but I haven't tried it on the controller.
* Starting leds
* Started dual color leds PWM functions and configs
I started to create the PWM functions and configs based on internet examples, it doesn't compile yet
* Backtraced a bit to establish and try debug before continuing the pwm
Just this, algo some doc as a new pinout image, space cadet modification to try if it works and little more
* Deleted unuseful stuff
After trying the reestructure to being compatible with several keyboards and that it worked I deleted the other keyboard.
Added space cadet shift to ISO.
Finally I couldn't debug everything and I'm getting quite frustrated to continue much more than just adding pwm leds
* Changed again Iso fix for Space Cadet
* Renamed keyboard, future pull
I just renamed the keyboard and made some simplifying changes in order to make a pull request sometime soon.
I'm too frustrated, tired and knowledge limited to achive using the PWM for leds, I didn't even get to use the debug mode...
I intend to end basic led color change using layers (if I can), document everything properly and make a pull request so other users can continue/use this project.
* Writed Readme.md file
I also corrected a previous compilation problem and ordered a bit the keymaps
* Corrected readme
* Try to add layer activated light
* Revert "Try to add layer activated light"
This reverts commit 205af820d845dab08988f329b9f062f558060220.
* Progress to fork
Coming back to work, upcoming pull
* Linked image
Corrected readme
* Some cleanning
Added images to readme, som cleaning, burning after commit.
* Almost finished (working)
Finally
* Finished bluepill firmware
Just finished and tried layer dependant led colors. Going for merge
* Deleted innecesary stuff and trailing spaces
Just as commit title said.
* Coding conventions
Just modified some files to respect coding conventions
* Deleted XXXXXX define
Checking some other PR seen this improvement
* Changes suggested on PR
Firs doing the easy changes
* More changes for the PR
-I also deleted one unused function for led toggling on matrix.c (Now it uses layer dependent baklight, algo on of on start)
-Deleted commented function on keymaps.
Right now only needs testing and all pragma replaces.
* Almost every pragma change on PR
That's almost finished, only waiting for reply due to compiling errors
* Revert "Almost every pragma change on PR"
This reverts commit 07f23aa862b370cdf0ae37d6f2130c9e9856f491.
* Revert last commit
I moddified by mistake a file from another keyboard
* Solved last pragma
Compiles fine.
Now I only need to test it, I say you if it works to include it in the main repository.
* helix/serial.c add support PD1,PD3,PE6 and configuration simplify
* Add comment about ATmega32U4 I2C
* Add compile time check for ATmega32U4 I2C
* change TAB code to 8 SPACE code
* Helix serial.c PORTD,PD0 test. OK
OK PD0
- PD1
OK PD2
- PD3
- PE6
* Helix serial.c PORTD,PD1 test. OK
OK PD0
OK PD1
OK PD2
- PD3
- PE6
* Helix serial.c PORTD,PD3 test. OK
OK PD0
OK PD1
OK PD2
OK PD3
- PE6
* Helix serial.c PORTE,PD6 test. OK
OK PD0
OK PD1
OK PD2
OK PD3
OK PE6
* Helix serial.c: PD0,PD1,PD3,PE6 all test end
* Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN
* Helix serial.c add debug code
* Helix serial.c: add transaction ID range check
* Helix serial.c debug code update
* Helix serial.c debug code update
* Helix serial.c: Strict checking of the value of tid.
* adjust the delay of serial.c
* Helix serial.c: remove debug code
* remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk
tmk_core/common.mk has
>ifeq ($(strip $(CONSOLE_ENABLE)), yes)
> TMK_COMMON_DEFS += -DCONSOLE_ENABLE
* Fix error handling in split_scomm.c
* add some comment to serial.c
* add some comment about SELECT_SOFT_SERIAL_SPEED
* adding my keymap
* updated pull request comments from dashna, including redundancies and DVORAK entirely
* changed over visual representation to use 'LAYOUT_preonic_grid()'
* added a ReadMe and commented out AUDIO_ENABLED related stuff in keymap.c until I can align with current QMK standards
* Update readme.md
* readme corrections and adjustments
* remove clmk and dvrk and backlight; switch esc and enter to be modtap; add meh key
* change songs
* space cadet; move enter; move '"; move pgup pgdn
* remove extra songs
* update from noahfredrick keymap
* make it easier to type ../../thing/*/*
* move pipe
* requested changes
* Added base keymap
* Added initial layers and mirrored most of Pok3r behavior.
* Some stuff for Space Captain
* Added new Marianas keymap for DZ60
* Included suggestions to remove unnecessary line regarding MODS_CTRL_MASK, and added names for layers.
Added enum to define names for layers, and removed unused #DEFINE
* Added DVORAK and COLEMAK
* Caps + enter + space for flashing mode.
* Added RGB status
* added flash script
* Changed lighting modes to make layers more apparent
* fixed issue with not being able to exit gaming mode.
* Added abbreviation constructor
* Changed lighting modes to make layers more apparent
* fixed issue with not being able to exit gaming mode.
* Added abbreviation constructor
* Fixed bug with SQL Table Macro generator.
* restructured file. No Logical changes.
* literals only for smart macros
* removed extraneous pointer declaration.
* Smart Macros
* Added Makefile and header file
* extended smart macros to be able to cover the whole alphas.
* removed non-relavent keymaps.
* didn't mean to include this guy.
* added my keymap
* Adde more changes
* Moved to pevecyan folder
* Added slovenian mapping
* Slovenian keymap completed
* Suggestions updates
* Fixes on slovenian keymap
Made some typos in previous iteration
* Make some keys more accessible, prevent mistypings
* Add "Gaming" layer which maps L-Ctrl to space (left-handed jumping compatibility-mode for all games)
* Fix up userspace after feature merges
* Add new macros for keyboard layouts
* Keep new layouts in keymap for easy reference
* Cleanup layouts
* Fix CRKBD wrappers
* Fix up comments
* Fix spacing in orthodox base layer
* ergodox related cleanup
* Make KC_MAKE only flash when holding shift
* Add option to fast compile boards
* Clean up rgb modes to save space
* Re-enable Swap Hands on my Iris
* Add files via upload
* Delete config.h
* Delete keymap.c
* Delete rules.mk
* Keymap w/mirror mode and steno support.
Keymap w/mirror mode and steno support. Can be used entirely one handed.
* Fixed some niggling issues.
It was not properly including the "config_common" files, and was causing it to break on the configurator.
Additionally, updated this to use the split common code.
* RGB toggle button
* Remove custom lighting effects
* Fix small bug in Symbols layer
* Ignore mod tap interrupt in XD75 for skewwhiffy, and split layers into two for more flexibility and fix persistent layer issue
* Replace shift in nav layer with IntelliJ omnibox shortcut to avoid a sticky shift
* Remove custom setting in config, because it were annoying, it were.
* Move navigation buttons in one key
* Some review markups
* Use enums for layers
* Use LAYOUT_ortho_5x15
* Revert some capitalization changes made by accident
* DZ60 layout based on stephengrier's with customisations.
* CapsLock is used as Fn key.
* Del is available as Fn+Backspace & Shift+Backspace (using a macro)
* PgUp / PgDn / Home / End = Fn+Arrows (as on macOS, Microsoft Surface)
* Tilde = Shift+Esc
* Backtick = Fn+Esc
* Underglow toggle and mode selection are available as Fn+Q and Fn+W
* Reset (bootloader mode) = Fn+B
* Standardised layout formatting and Ctrl+Del & Shift+Del support.
Using 7 underscores for KC_TRNS in layouts and aligning the keycodes
according to LAYOUT_directional.
Del is now only Fn+Del, Ctrl+Backspace translates to Ctrl+Del,
Shift+Backspace translates to Shift+Del.
* Documented new Backspace/Del related macros.
Del is now just Fn+Backspace, pressing Ctrl+Backspace sends Ctrl+Del,
pressing Shift+Backspace sends Shift+Del
* Orange75: cleanup and Configurator support update
`orange75.h`:
Moved `K014` to the second (number row) as the left half of a split Backspace (guessing at its true location; will need to be checked/tested after merge).
`info.json`:
Updated to match new `LAYOUT` macro.
`keymaps/default/keymap.c`:
- Updated to match new `LAYOUT` macro.
- Added layer mock-ups as block comments.
- Formatted to be a bit more readable.
* Orange75: deleted an extra comma from keymap.c
* Helix each keymap's using rgblight mode symbol instead magic number
No change in build result.
* Helix pico keymaps: make rgblight modes selectable.
No change in build result.
* Helix rev2 keymaps: make rgblight modes selectable.
No change in build result.
* fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT)
* Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.
* IRIS Keyboard Keymap
I wanted a keymap that really changed things up. I also found that as a programmer I need as many symbols as I can get.
* Make cmd-option-escape work on a mac
* Add more prettyfication.
* Add other types of hold
* More work on the layer keys
* tweaks
* More tweaks.
* more tweaks
* Remove OSL/OSM they didnt seem to work very well
* DC01 updates and I2C avr speed overwrite
- General updating of DC01
- Made F_SCL define in AVR I2C driver overwritable from config.h
* Update drivers/avr/i2c_master.c
* Personal Nyquist keymap added.
* Responded to comments for PR.
Removed unnecessary imports.
Updated way of macros.
Removed tick from unicode inputs.
* formatting in keymap
* Implement macro recording
* Remove off-by-one from the macro recorder
* Holding both modifiers enables the third layer
* Exit the 3rd layer into one of the secondary ones
* Regular Enter and Escape on the secondary layers
Useful for the macro recording because the "tap" modifiers always act as
modifiers there.
* Remove the buffer overflow from the macro recorder
When the limit is reached, the backlight blinks with each keypress.
* More robust macro recording implementation
* Macro record refactoring and improvement
- support for a second macro (saved using the end of the macro buffer)
- improved reliability
* Add comments to my macros
* Macro recording: remove a redundant code
* Separate the raise+lower layer from the special layer
* Add back/forward keys
* Bind mouse movement
* More readable KC_TRNS
* Improve the mouse bindings
* Use a convenience macro instead of the low-level ACTION macro
* Add mouse to the Dual layer; make most of the layer transparent
* New "mouse" layer; clean up the "special" layer
* CapsLock, NumLock and ScrollLock on the Special layer
* Enable my fix for the stuck modifiers and adjust the dual layer to it
* Fix the macro recording after enabling the stuck mods fix
* Click with Lower/Raise+Space
* Reduce the memory used by the macro recording
Previously the auxiliary layers were numbered 30 and 31 which resulted
in all 32 array elements being allocated regardless of the actually
used layers in the user code.
* Optimize source_layers_cache for the cache memory
Swapping the array indices should increase the locality of the memory access.
* Remove the mouse layer
* Use update_tri_layer to simplify the code
* Add some custom per-keymap build options
* Add ShiftLock
* Secure the reset button
* Add numeric layer
* Remove explicit layer keys on LW and RS layers
* Replace Alt+left/right with Back/Forward keys
* Sleep/delay key (for macro recording)
* App/menu key
* Fix stuff after merging to master
* Local per-keymap config.h; minor cleanup
* Remove the old macro_record.h
Replaced with dynamic_macro.h
* Adjust my keymap to the current API
* Pure Pro Gaming layer
Accessible by double tapping the Pure Pro layer. It features switched
Lower and Raise layers, for one-handed access to numbers.
* Pure Pro Gaming layer: no Mod4, persistent number layer under RShift
* Pure Pro Gaming layer activated with long press, not double press
* Reduce the size of the vifon keymap
See: issue #930
* Increase the dynamic macro buffer
The default was actually decreased. The actual used value didn't change.
* Add the context menu key
* No more strange ideas in the gaming layer
* Reduce the firmware size by disabling API_SYSEX_ENABLE
* Make slash available on the PP layer (replaces the RESET key)
* Add a generic "hold this key" macro
* Add a missing undef
* Turn LGUI in the gaming layer into LW instead of disabling it
It's not as disruptive as LGUI and it makes the LW/RS order kind of
more consistent (LW on the left, RS on the right).
* Refactor the Pure Pro Gaming layer
* Try out the 1st party qmk KC_LOCK (vs my own KM_HOLD)
* Alternative way to switch keyboard layouts with the left hand
* Add dot & slash to the Pure Pro layer (but not to the Gaming layer)
* Now that there is a second KM_LW, we can simplify the layout a bit
It was confusing to have the modifiers completely swapped. Just
moving them is much more natural.
* Disable the console now that qmk got bigger
* Update the keymap for the modern qmk standards
Adds maximized DZ60 Plate B layout macros in ANSI and ISO, featuring 2.25u Left Shift (1.25u/1u split for ISO) and 1.75u Right Shift with Inverted-T arrow keys. Also supports Split Spacebar and Split Backspace.
* Added pteron files made via from kbfirmware.com.
* Added readme.
* Made some progress on Pteron keymap.
* More keymap.
* Updated bootloader, added some keymap illustrations.
* Moved default keymap to FSund, made default keymap from default preonic keymap.
* Fixed typo in default pteron keymap.
* Made changes recommended by drashna.
* handwired/ibm122m: refactor
Refactored layout macro and keymaps to more closely resemble the keyboard's physical layout.
* handwired/ibm122m: add Configurator support
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Generate a new project for the KBD4x
* Specify the possible layouts for the KBD4x - MIT and grid
* Fill out the readme for the KBD4x
* Configure the default keymap and wiring configuration as specified on http://qmkeyboard.cn/
* Add info.json for QMK Configurator
* Enable backlight support for the KBD4x
* Standardise on LAYOUT_planck_mit/LAYOUT_ortho_4x12 layout names
* Add whitespace so the Readme will render correctly
* Disable mouse keys support for the KBD4x to make the firmware small enough
* DZ60: Deleted K214 from LAYOUT_all
* DZ60: Delete matrix LAYOUT_2_shifts; replace with LAYOUT_all
After the deletion of K214 from LAYOUT_all, LAYOUT_all and LAYOUT_2_shifts are identical.
Deprecated LAYOUT_2_shifts in favor of LAYOUT_all.
* DZ60: refactor 256k_HHKB and itsaferbie keymaps to use LAYOUT_60_hhkb macro
Both keymaps previously used the LAYOUT_hhkb macro. After comparing the macros, the only difference between them was that LAYOUT_hhkb included the place of the ISO Backslash key. Neither keymap used this key, so both were refactored to use LAYOUT_60_hhkb instead.
LAYOUT_hhkb is now essentially unused by any keymaps in the repo. (More on that in a moment.)
* DZ60: bugfix for dbroqua keymap
This keymap had two layers that used the LAYOUT_true_hhkb macro and a third that used LAYOUT_hhkb. These macros have the same number of keys, but represent different physical layouts. As the "main" layers used LAYOUT_true_hhkb, switched the third layer to LAYOUT_true_hhkb as well.
The LAYOUT_hhkb macro is now unused by any DZ60 keymaps in the repo, and can be safely deleted.
* DZ60: bugfix for 60_ansi_arrow_fkeys, 60_plus_arrows, and stephengrier keymaps
All three keymaps had one layer in LAYOUT_all and one in LAYOUT_directional. Only difference between these macros is LAYOUT_all excludes the ISO Backslash position. As none of the keymaps used this position, all layers were switched to use LAYOUT_directional.
* DZ60: added layout mock-ups to dz60.h
Documenting the physical layouts that go with each matrix.
* DZ60: replace TMK SHIFT_ESC with QMK Grave Escape
Replaced all instances of keycodes that called TMK's ACTION_FUNCTION(SHIFT_ESC) with QMK's KC_GESC, and added config.h files so KC_GESC behaves as the deprecated TMK function did, except for the default keymap, which I thought should have the QMK standard behavior.
* DZ60: delete SHIFT_ESC code blocks
Deleted ACTION_FUNCTION(SHIFT_ESC) code blocks from keymaps that didn't use the functionality it provided.
* DZ60: deleted unused MODS_CTRL_MASk definitions
Was used in the now-deleted SHIFT_ESC code blocks. Interestingly named MODS_CTRL_MASK when it was actually checking the Shift keys. *shrug*
* DZ60: refactor jkbone keymap to use process_record_user
Replaced TMK action_function keycodes with QMK process_record_user equivalents.
* DZ60: delete unused layout macros
The macros LAYOUT_hhkb, LAYOUT_directional_625_space, and LAYOUT_60_ansi_split_bs_rshift_5x1u were unused by any keymaps in the repo, and have thus been deleted.
* DZ60: refactor iso_6u_space and iso_7u_space keymaps
Both keymaps refactored to use the LAYOUT_60_iso macro.
* DZ60: refactor dz60.h
Updated the notation of the switch arguments. Format is now:
`k<row><column>`
where `<row>` is `[0-4]` and `<column>` is `[0-9a-e]`.
* DZ60: refactor LAYOUT_60_iso_5x1u matrix
Updated matrix so `KC_ENT` belongs on the home row, which is consistent with LAYOUT_60_iso for the DZ60 as well as the ISO community layouts.
* DZ60: fix white space in dz60.h
I hate when indentation is inconsistent within a file.
* Enabled unicode support and send_unicode function
* Unicode cleanup
* More unicode tweaking
* Update EEPROM stuff
* Account for keyboard macros
* Switch Equal to Plus on Ergodox
* more tweaks
* Minor Unicode tweaks
* Correct matrix printing for keylogger
* Fix unicode functions
* Fix unicode mode set since it actually uses EEPROM
* Re-add DISABLE_LEADER
* Ergodox is easier to hit the tapping term, fix that
* Fix stupid type on unicode mode check
* Preliminary CRKBD/HeliDox support
* Fixes to Helidox
* Cleanup userspace from old merge stuff
* Remove CCCV sounds
* Make Mode NOEEPROM Again
* Add Function level EEPROM configuration
Add kb and user functions for EEPROM, and example of how to use it.
* Bug fixes and demo
* Additional cleanup
* Add EEPROM reset macro to example
* Forgot init function in list
* Move eeconfig_init_quantum function to quantum.c and actually set default layer
* See if removing weak quantum function fixes issue
* Fix travis compile error
* Remove ifdef blocks from EECONFIG so settings are always set
* Fix for ARM EEPROM updates
* Fix merge issues
* Fix potential STM32 EEPROM issues
* Use proper function levels
* Add matrix init functions
* Convert KEYMAP to LAYOUT
Or @mechmerlin is going to hunt me down and harm me... probably :)
* Fix conflict issues
* Add personal KC60 keymap
* Update personal KC60 keymap
* Keymap update 2018-05-30 01:53 UTC-7
* Added macro: T_PEEKR
* Added macro for MacOS Select All; modified MacOS function layer
* Added git branch-name macro
* Added GitHub signature macro
* Added readme files
* Added Quake 2 and System layers
* Refactored keymap readme
* Refactored to add userspace files; added Colemak layer
* Minor code cleanup; updated readme files
* Reverted use of userspace
Decided not to make use of the Userspace feature at this time. Reverted its addition, and updated the readme files where needed (they were linking to userspace files).
* Updated per review comments by @drashna
* Refactor buggy macros
I'm still not sure these work properly
* Fix Windows shortcuts
* Fix Mac shortcuts, possibly
Untested; still may be broken.
* Remove PREVENT_STUCK_MODIFIERS from config.h
Deprecated by #3107
* Custom keymap for the ErgoDone
The keymap supports QWERTY and COLEMAK MOD-DH with LED indication.
* Enable Space Cadet Shift
* Fix after-boot layer indicator LED
* Implement keyboard suspend, move layer LED handling to function, unify
identation
* Add readme.md with layout
* Optimize LED handling, add include guard
Read the default layer via the proper EEPROM function, so the calling of
bootmagic() is no longer necessary.
Fix bug when the CapsLock LED wasn't working anymore after a layer
switch.
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* removed homerow mods, more flashy lighting!
* changed delays for lighting.
* velocikey code retro fit into userspace to match typing speed
currently "working" but isn't as reactive as I want.
* Readme and other documentation hidden throughout code
* Added a pretty picture
* pretty picture actually added
* More readme updates
* Velocikey now working inside my userspace!
* Changed repo macro and fixed readme
* Removed media layer, moved media control to LAZY layer
* fixed more merge issues when I had to merge...
* implemented some leader key stuff
* removed merge garbage...
* changes requested by @drashna, leader key switch from macros
* Add basic support for the YD68 / YD68v2.
Keymap and WS2812 underlighting work. Capslock LED should work, though I don't have one populated to test. Backlight LEDs are not set up, as they're not on a hardware PWM pin, could be set up as software.
* Fix Imgur link
* Fix default keymap to match the stock firmware
* Fix the Hardware Supported line and add a short description
Messed up in my previous PR (#4017) by providing the wrong matrix name.
Fixing by changing the matrix name instead, because there's only one at this point. Thought it made more sense this way.
* Helix: make rgblight modes selectable.
No change in build result.
* edit the comment of helix/rev2/keymaps/default/keymap.c
* Helix led_test keymap: reduced the size.
* Disable Leader to reduce firmware size for Travis
* Additionaly fixes to USB_USB\BLE Keyboard converter
* Disable One Shots to get USB to USB BLE converter to fit
* Update for SEND_STRING usage
Update for SEND_STRING usage.
Sending keyboard reports (kbd, nkro) now obey the minimum polling time.
While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals.
* Updates for send string, syscalls, stdio, debug prints, auto shift
Now properly waiting for previous keys sent over USB to complete before sending new.
Added heap to linker and now compiling with syscalls support.
Removed custom string functions and now using stdio.
dprintf now works as intended through virtser device.
* CTRL and ALT keymap updates
CTRL mac keymap updated
ALT default and mac keymap updated
ALT rules.mk added Auto Shift with default no
* Code cleanup as per discussion with vomindoraan
Code cleanup as per discussion with vomindoraan
* model01: implement RGB matrix feature
LEDs can still be individually controlled if this is switched off.
* model01: use fast banked LED setting commands
* model01: update default keymap to use RGB matrix
* model01: update RGB matrix support to match common_features.mk
* rgb_matrix: include <string.h>
This was missing after commit 4d5705ea6c
which introduces a use of memset().
* model01: make g_rgb_leds weak
This allows users to override which LEDs are configured as
modifiers, or tweak the x/y coordinates, should they so choose.
* Initial commit of RAMA U80-A
* Initial commit of RAMA U80-A
* Moved IS31FL3736 driver, minor cleanups
* Superficial stuff
* Review changes
* Refactored to use common code.
* rgb_matrix: use a driver ops struct
This is intended to avoid #ifdef proliferation on adding more drivers,
eg. model01, which use different architectures.
* rgb_matrix: document driver struct members
* rgb_matrix: remove unused LED testing code
* rgb_matrix: don't build into IS31x drivers unless being used
* rgb_matrix: refactor make config options
This ensures that the necessary files are included for any custom
RGB_MATRIX_ENABLE value, without having to add entries here for specific
boards. This particularly affects model01 because its controller is
integrated and won't be used anywhere else, so it's preferable not to
put it in common_features.mk.
This now validates the value of RGB_MATRIX_ENABLE.
It was necessary to fix an error in ergodox_ez rules.mk using the wrong
comment separator, yielding an invalid value.
* IS31x drivers: don't write the control registers all the time
This is only needed when they are changed. This is done in init() and
board- or keymap-specific code is free to make further changes.
* rgb_matrix: move structs from chip drivers to rgb_matrix_drivers.c
This approach is specific to the rgb_matrix functionality, so keep it
neatly separated from the raw chip drivers.
* holefully correct error in mtdjr userspace for layer_state_set_user
* return state and wrap rgb actions in their own conditional
* mtdjr nyquist and userspace updates
* mtdjr updates as requested
* pull out toad keyboard and get it compiling
* refactor xmmx
* use the correct LAYOUT macros
* move LED code out to toad.c file
* move LED code out to xmmx.c file
* adjust for correct number of columns and pins used
* remove led set user
* Rename constexpr keymap folder to konstantin
* Replace numpad comma with Unicode comma
* Rename tap dance constants
* Move record->event.pressed check into switch
* Use RShift as a dedicated Fn key
* initial commit
* Update readme.md
* Update keymap.c
added comment for description of function to control LED as layer indicator
* corrected formatting as requested.
* format for configurator
* corrected info.json to propertly reflect layout in Configurator
* updated layouts to reflect physical keyboard
* comment out BACKLIGHT BREATHING in config.h
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* removed homerow mods, more flashy lighting!
* changed delays for lighting.
* velocikey code retro fit into userspace to match typing speed
currently "working" but isn't as reactive as I want.
* Readme and other documentation hidden throughout code
* Added a pretty picture
* pretty picture actually added
* More readme updates
* Velocikey now working inside my userspace!
* Changed repo macro and fixed readme
* Removed media layer, moved media control to LAZY layer
* fixed more merge issues when I had to merge...
* create: biacco jis keymap for windows for Ergo42
* fix: biacco-winjp: change #ifndef to #pragma once.
* fix: following: 3935#pullrequestreview-157941685
* First version of FollowingGhosts' custom layout
* Added copyright etc.
* Fixed readme and added space cadet shift
* Moved from RGB to HSV, updated readme and added media keys
* Updated pragma
* Added play/pause and updated config
* Added pragma back
* added my planck keymap
based on a blend of my minivan keymap and the planck default keymap.
* moved pipe to better match minivan keymap
* updated as per @drashna
also moved my keymap a bit after adding the quad encoder and underglow
(which doesn't even work on arm right now lol)
* a few smaller tweaks
* Crkbd: move I2C and Serial defines to keyboard's config.h
per @drashna on Discord
* Crkbd: remove misleading comment re: I2C and Serial
USE_I2C and USE_SERIAL are usually a "one or the other"-type deal, but this keyboard uses both.
* funged git history, restarting
* tested and working (message typed on this)
* updated documentation to include wiring directions
* formatting
* updated matrix and default layout a bit
* getting ready for merge into main repo
* getting ready for merge into main repo v2
* cleaning
* cleaning repo of extranious files
* updated documentation
* initial check in
* figure out the column pins
* temporary keymap
* guess the row pins
* fix matrix.c compilation errors
* use the LAYOUT_60_hhkb macro and tweak the keymap a little bit
* update readme
* Put my name everywhere
* Add QMK Configurator support
* figured out the row pins
* update readme to have reset info
* Fill in some blanks that are documentation related
* Update matrix.c
* add kb functions
* forego kbfirmware labeling
* add arrows and caps lock to function layer.
* add a LAYOUT_60 and LAYOUT_all macro
* missed a comma
* add configurator support for the two new LAYOUT macros
* Jack helped me with a new custom matrix
* add 60_ansi into rules.mk
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* Added template copies for prime_l
Added first set of files for prime_m and prime_o
Temporarily storing kbfirmware dumps in tmp
* Completed base for prime_m, prime_o and prime_l
Moved prime_r into primekb folder
* Added in QMK Configurator layout files for new PrimeKB keyboards
Slight modification to layout header files
Added my name to licensing
* Updated primekb readmes
* Removed temporary working files
* Updated default keymap for Prime_O
* Added link to Newbs Guide in prime_r readme
* make bpiphany directory with simple readme file
* move unloved_bastard to bpiphany directory
* move frosty_flake to bpiphany directory
* move pegasushoof to bpiphany directory
* move tiger_lily to bpiphany directory
* add a little more info to readme
* move kitten_paw to bpiphany directory
* update make instructions
* update intro text
* add missing routines to matrix.c of unloved_bastard
* add missing routines
* initial commit
* Update readme.md
* Update keymap.c
added comment for description of function to control LED as layer indicator
* corrected formatting as requested.
* format for configurator
* corrected info.json to propertly reflect layout in Configurator
* updated layouts to reflect physical keyboard
* Create layout for JD45
* Tweak layout to better support JD45 and add more tap dancing.
* Add Maltron and tweak layout for 40% enter compatibility.
* Switch back to `BL_TOGGLE` for backlight.
* More tweaks
* Rename talljoe_gherkin to talljoe-gherkin
* Make NAV layer tab C_S_T also.
* Add missing RESET key.
* Add Talljoe layout for minivan.
* MTI is not for me
* Tweak keymap.
* Add talljoe keymap to Atreus.
* Minor tweaks.
* Fix talljoe keymaps to work with new Zeal60 commit.
* Added QMK support for GSKT-00, PaladinSplit, PaladinTKL and PaladinPad pcbs
* Remove the paladin boards from this PR
* Changed gskt00 as per review comments. Added two new default layouts, 60_ansi_tsangan and 60_iso_tsangan
* Fix the layouts/default/60_iso_tsangan/layout.json file
* Removed ? from rules.mk, removed unused fn_actions from keymaps. Changed the 60_iso_tsangan to work correctly
* Removed PREVENT_STUCK_MODIFIERS
* Keyboard: add Keyboardio Model01
This port implements key scanning and everything in their default
keymap.
It doesn't implement mouse warping; QMK can't do that (yet).
LED control is mostly not implemented. The ability to set all LEDs is
included because they can get stuck on coming from the bootloader
otherwise. Single LED control is also implemented for numpad indication.
The scanners also support batch LED transfer which is what you'd need if
you wanted to do fast effects. Gamma correction is also not implemented,
but is present in the original firmware. The necessary info for further
implementation is in the KeyboardioScanner module for Kaleidoscope.
To install on your keyboard:
make model01:avrdude
When prompted, hold the "prog" key on the keyboard to put it into
programming mode. This can also be achieved by holding the "prog" key
while plugging in the keyboard. This works even if the firmware is
corrupt or missing.
Hot plugging the halves seems to work fine, but there is no explicit
support for eg. making sure the matrix scan rate is reconfigured.
* model01: clean up includes and include guards
Uses #pragma once everywhere.
* model01: split LED and matrix code
This makes space if someone wants to implement better LED support
later on, the keyboard is a lot more capable than the current code.
* model01: separate I2C timeouts for matrix vs. LED
If the scanners have no data they don't ACK reads and just time out.
So we want a pretty short timeout to keep scan rates high.
Meanwhile the LED transfers might take longer - I don't know though,
so here we are conservative.
* model01: implement better LED control
- gamma correction from the manufacturer's firmware
- suitable delays to allow back to back LED writes
- this is fast enough to write the whole keyboard without noticeable
delay, in my experience
- minor bug fix: RHS Fn key was not addressable
* model01: add license to wire-protocol-constants.h
* model01: replace gamma LUT
The original was of unclear license origin. This one is functionally
identical and includes a generator should people wish to adjust it.
* model01: use the already-present CIE1931 lightness curve
...rather than baking in another gamma curve.
It's said that CIE1931 is the right thing to be using rather than gamma.
OK. Let it be so.
* model01: call matrix_init_user() from matrix_init_kb()
* model01: remove inapplicable config options from rules.mk
* model01: readme.md: update build environment links
* Add flashing instructions for Linux
* Make device/manufacturer name consistent for ymd96
* Disable command mode by default for YMD96
* Add function call to fix backlight for YMD96
* Add personal YMD96 config
* Replace include with QMK macro
* Move KEYMAP macro to keymap-level folder
* Move custom KEYMAP macro to global LAYOUT_iso macro
* Change transparent keymappings to global definition
* Remove unecessary import and change to pragma once
- (instead of repeated ifdef)
* Remove global keymap/layout definition
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* Arrow keys are now arranged on hjkl (vi style)
* The escape key is moved on capslock, shared with func layer switch
* The grave key is now dedicated (not shared with escape)
* Add a new numpad layer that can be activated with the spacebar
* Fix layout mismatch between layers
* Use bult-in underscore KC_TRNS alias
* add my config
* fix backlight, clean up that code
* group background code, restore static var
* qwerty is supposed to be in the middle
* wrap layer change backlight in ifdef
* backlight levels and some more 'emojis'.
* Restructure to make it possible to press cmd ent on the right side of the board with one hand.
* Expose the period through the number layer. Add Hyper keys to mouse layer
* reduce mouse speed
* add a : -P key
* Thumbs up and down, remove some keys that are duplicated via function keys, clean up
* fix build issues
* add various emoji
* duplicate default Meira keymaps
* Miera updates
* add documented but unmapped emoji
* Sound for the Meira, was stumped by a file size! Thanks drashna!
* add docs
* docs
* revert lib changes...
* clean up
* clean up
* remove make file
* Fixes missing key
* clean up
* add my lets split
* add more emoji
* add the telophase board (unofficially, I guess...)
* add missing files
* add/reset files
* Review feedback implementation: Not needed. Add #define FLIP_HALF to your config.h file instead.
* Review feedback implementation: All of these includes should be replaced with #include QMK_KEYBOARD_H.
* Review feedback implementation: [FAILING] You may want to use LAYOUT_ortho_4x12 instead, and move this to /layouts/community/ortho_4x12/ instead. That way, you can use the same keymap for all of the boards.
* clean up
* add a key for command tilde (osx loves it)
* at least its building again
* remove adjusts and migrate layer switching to MO(_LAYER)
* update the telophase readme
* update the telophase readme
* grahampheaths -> grahampheath
* ONEHAND_ENABLE -> SWAP_HANDS_ENABLE
* convert lets split to use ortho_4x12
* Move lets split keyboard layout into community/ortho_4x12
* make telophase use LAYOUT()
* I did it?!
* Add clap and grin
* swap tabs and back and forward
* whitespace
* Add ellipsis and thanks emoji
* Move flip_half to telophase config (conflicts with lets split layout)
* Use #pragma once instead of config_user_h
* remove unused stuff
* Initial version of zeal60
* WIP
* Fixes issue #900
* Adding RGB underglow functionality.
Fixed a compile-time conflict caused by enabling RGB underglow functionality.
* Refactor RPC protocol
* Fix last merge
* README for RGB underglow updated.
* Additional README changes.
* Adding RGBW strip software-based current-limiting functionality.
* RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead.
* Updated README to reflect implementation of built-in current limiting.
* Keymap readability improvements.
* Minor keymap improvements.
* Fixed LED driver init sequence, formatting
* Dimming implementation tested, working.
* Stab LEDs synced with spacebar hits in effects.
* RGB underglow tested and functional. Simplified README for RGB underglow.
* Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow.
* Improved arrow key positions in keymap.
* Added functionality to correct uneven RGB underglow. Refactored related code.
* Reverted to safer values for underglow.
* Changes for v0.3
* Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden.
* Create keymap.c
Added split backspace and split shift to ISO layout
* Create config.h
Turned on LEDs for new layout
* Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above.
* Added hhkb_wilba keymap
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Added indicators, full param setting via host
* Added "mousekey" layout
* Added Zeal65 support, factory test mode
* Keycode safe range changed, caused bugs
* Bumped EEPROM version due to change in QMK keycodes
* Disable HHKB "blocked" LEDs if KC_NO in keymap
* Added "disable_hhkb_blocker_leds"
* Required overridden function for keymaps in EEPROM
* Added polar coordinate mapping, effect speed
* Force Raw HID interface number to 1 always
* Fixed last merge from master
* Added effect speed to default keymaps
* add BACKLIGHT_ prefix to vars
* add BACKLIGHT_ prefix to vars
* Keymap speed effect; keymap improvements/fixes
Readme updated to match changes
* Refactored to use common IS31FL3731/I2C drivers
* Fixed make rules, backlight disabled feature
* Make split rightshift default for Zeal65
* Added M60-A as a "version" of Zeal60.
* Renamed IS31FL3731 driver functions
* Fix suspend_wakeup_init_kb() being defined twice
* First pass refactor dynamic keymaps
* Updated to changed I2C and ISSI drivers
* Refactor zeal_color.* usage to quantum/color.*
* Updated Zeal65, fixed dynamic_keymap
* Major refactoring of Zeal60 backlight and API
* Lots of little cleanups
* Added readme.md
* Added readme.md
* Added LAYOUT_60*() macros, refactored and cleaned up default keymaps
* Fix compile error in suspend.c
* Added Zeal65 LAYOUT macros, info.json
* Added rama/m60_a, deleted zeal60/keymaps/m60_a
* Fixed rama/m60_a/keymaps/proto
* Fixed compilation error for suspend.c
* Requested changes for PR
* Fixed readme.md images
* Another readme.md fix
* Added drashna's requested changes
* move tv44 to thevankeyboards directory
* move bananasplit to thevankeyboards
* move roadkit to thevankeyboards directory
* add a basic readme
* update readmes to correct the make instructions and add more help text
* rename tv44 to minivan as per Jack's suggestions
* update readme
* rename tv44 to minivan
* update tv44 to minivan
* change includes for tv44 to minivan
* remove extra includes
* rename alf_x2 to alf
* rename to x2
* rename dependencies
* Fix readme
* moved x2 into alf directory
* update readme for make instructions
* move dc60 to alf directory
* update dc60 readme for make instructions
* change readme txt as per noroadsleft PR comment
* ALT keymap update
Added additional End key on layer 1 to match key cap
* LED driver update addressing PR #3871
Update sync between IS31FL3733 drivers is causing varying behavior in keyboards including brightness mismatch and slight flicker at very low rgb values. Visually, disabling sync is not noticeable. Ref PR #3871 by guarnacciaa.
* add SCREEN_NAV layer for copy/pasting within screen
* working readreg/paste macros
* working read reg / paste macros
* write log and tran patterns, and expand
* add ls -la shortcut, add tab on combined layer
* put delete word on the right pinky key on shell_nav layer
* add TAB on the right side, add reset key
* added Cloud9 macros
* add cloud9 shortcuts to atreus layout
* added BROWSER_CONTROL layer
* finalized browser control layer
* adding comment
* add browser control layer to atreus
* add flashing command line
* remove the tab on combined layer
* remove the tomouse
* remove mouse layer, change log/tran expand patterns, cleanups
* add dumptlog macro
* add "delete to home" shortcut
* fix conflict
* remove unneeded mouse layer
* add meh shortcuts on the browser_control layer
* add/modify some macros
* explain the various layers
* putty paste is right mouse button
* Add own personal Contra layout
* Enable auto-shifting
* Enable tap dancing and implement Space Cadet-like shift with LSHIFT and ENTER
* Implement Colemak Mod-DH layout, clean up Adjust layer
* Implement keyboard and keymap refactor
More info: https://github.com/qmk/qmk_firmware/pull/3191
* Update the readme.md and keymap.c files for Colemak
* Add include guard, make layout description cleaner
* Updated info.json for Duck Jetfire
Generated a new info.json file. @mechmerlin asked my help in debugging this file. Firmware works as expected if built from source, but not if built from the Configurator.
* Corrected the position of the arrow keys in LAYOUT_all
* Add my own keymap to the list of available Redox keymaps.
This keymap is a Colemak keymap, and is meant to be used on Mac OS.
More information can be found in the readme.
* Fix "macOS" typo and remove mention of the license.
This directory inherits the project's license.
* Add missing custom keycode.
* Address feedback from PR review
- Remove deprecated code
- Remove RGB logic since it is overwritten by code running later.
* Added HHKB with 7U space bar
There are backlight changers on the function Z, X and C, mediat controls
have been removed.
* Fixed the default layout and added a keymap
GUI and ALT keys were swapped.
My own keymap which adds calculator, removes power, removes eject.
* Adjusted naming convention of hhkb layout layer
Fixed as per required from code review.
* Updated for qmk configurator
I didn't realise that there was a new standardisation across all the keymaps to accommodate the configurator.
Hopefully fixed now.
* rename 68_ansi layout to 65_ansi layout
* more renames and readme change
* add company names
* add community layouts for 68_ansi
* add 68_ansi support for mf68 type boards
* update readme
* - Fixed DK60 version in config.h
* - Updated dk60 readme with new QMK rules
* - Fixed wording in readme
* Added dbroqua layout for DZ60
I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).
With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.
Regards
* Updated dbroqua layout for HHKB keyboard
Added default configuration and alternate (swap gui/alt keys).
Save user choice in keyboard memory (like plank, thanks for this
feature!).
* Added dbroqua layout for Iris keyboard
* Updated layout and fixed includes
* Added personal layout for FC660C
* Inverted ESC & GRV
Corrected the make examples by adding the parent directory.
Updated the QMK Docs links for the build environment setup and the make instructions. Added links to the Newbs Guide.
* CTRL LED scan code mapping fix
Fixed scan codes to properly align with key wiring
* Update scan codes for caps and scroll lock lighting
Update scan codes for caps and scroll lock lighting according to previous scan code mapping update
* Added new Marianas keymap for DZ60
* Included suggestions to remove unnecessary line regarding MODS_CTRL_MASK, and added names for layers.
Added enum to define names for layers, and removed unused #DEFINE
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Fix merge conflict again?
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* update keymap
* Update rules.mk to remove redundant commented line
* Fix missing key on default layout for IBM Model M 122 key
* Fix issues identified by drashna and noroadsleft
* Update readme for IBM 122 key
* Add am keymap
* Add configuration to play nice with stuck modifiers
This is in particular useful with emacs since its easy to get ctrl stuck
* Deactivate mouse keys and backlight
* Add control/esc and shift/enter taps
* Remove DVORAK and PLOVER
I won't be using this soon, so getting some free space
* Raiser and Lower ideas from jeebak
* Add cursor and mouse layers
* Enable mouse keys
* Switch underscore with minus
* Disable audio and fix warnings
* Update to the upstream changes
* VIM line motion symbols on the raise layer
* Enable sound and freeup some media keys on layers
* Fix whitespace on keymap
* Code review changes
* Improve keymap documentation
* Improve keymap to match to the default one
* Restore DEFAULT_FOLDER to the default value
* Fix config.h unescaped line
Added support to enter bootloader from software (bootloader version must be newer than "v2.18Jun 22 2018 17:28:08" until workaround for older is created).
Updated CTRL and ALT keymaps for entering bootloader with Fn+b held for >500ms.
Added basic MacOS keymap for ALT.
USB sleep LED indicator now turns off after 1 second.
Slowed down debug LED code printing.
* mitosis:datagrok: fix typo'd inconsistent brace arrangement
(thank you @cari66ean)
* mitosis:datagrok: add makefile argument MITOSIS_DATAGROK_SLOWUART
* mitosis:datagrok: return backspace to opposite space, use TT(), more
- move backspace back to its position opposite space
- move del to red+backspace
- move tab back to tap-leftshift
- move printscreen/scrolllock/pause to blue+left pinky column
- use TT() instead of MO() to stick a layer on if wanted
- indentation that my text editor wants
- default to no audio; i can enable it at compile time.
* mitosis:datagrok: modularize features, add default layer rotator key
* mitosis: add MITOSIS_DATAGROK_BOTTOMSPACE makefile argument
* mitosis:datagrok: README improvements; document new features
* mitosis:datagrok: dot. not "number pad dot." in numbers layer
* mitosis:datagrok remove unnecessary _user audio code
* mitosis:datagrok: return to MO() for red/blue, keep TT() for purple
in this way, the LED still updates quickly when red or blue is pressed,
but we can still lock the purple layer on for 10-key numpad operation
with red+tapping blue.
* mitosis:datagrok: add colemak and dvorak default layers
* mitosis:datagrok update readme re: available default layouts
* mitosis: remove unneeded code that was overriding led_set_user
also, add some comments
* mitosis:datagrok: updated led setting code for new layers
also, place into led_set_user where it belongs, not matrix_scan_user.
* mitosis:datagrok: update LEDs when setting the default layer
maybe this should go into default_layer_set?
* mitosis:datagrok update readme with new imgur links + other improvements
* mitosis:datagrok fix typo in image urls
* mitosis:datagrok remove useless #include (ty @drashna)
* mitosis:datagrok undo unnecessary change to quantum/quantum.h
i can put the extern float definition in my own keymap code. (ty @drashna)
* mitosis:datagrok move customized layout to my keymap
no need to modify keyboard-level mitosis.h. (ty @drashna)
* mitosis:datagrok update comment describing my led indicator logic
* datagrok:mitosis update readme to document LED indicator.
* swap KC_LALT with KC_LGUI
* replace KC_RALT with KC_RGUI
This makes the keyboard more mac friendly out of the box (I'm aware this
that this could partially be done in software with the preferences but
hey, where's the fun in that).
* fixing ortho_4x12 configs
* Using upstream/master version instead
* Additions and Corrections
Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts
* Rules for vitamins_included
Added a section to disable RGB underglow for the Let's Split
Vitamins Included board.
* fixing ortho_4x12 configs
* Using upstream/master version instead
* Additions and Corrections
Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts
* Creating my own userspace
* Added Rorschach keymap
* renamed userspace folder
I renamed my userspace folder since I'm not ready to start using
it just yet, and I want to get my keyboards programmed. This is
a temporary thing and will be fixed later as I get time.
* adding files in "new" folder
* Disabling LEDs on Pro Micro
* Modifications to Kinesis keymap
* More kinesis tweaks
* removed userspace from master
Created a new branch for my userspace stuff. I'll work on it there.
* Moved keymap to separate branch
Moved the Rorschach keymap I was working on to a separate branch
for development purposes. Not ready to push it up to upstream
master.
* pulling in diverge tm2 from staging branch
* cleaned up comments, docs, licenses
* refactored apparent grid to make 2u spacebars more obvious
* various delinting from noroadsleft review
* most of drashna's feedback responded to
- lots of lint swept
- used more modern tri-layer functions
- still need to adopt modern split support.
* switch to common split code. remove comment cruft
* tapping force hold makes LT way more usable for rapid , sequences
* improvement of crkbd communication functions (based on helix-keyboard)
* Removed unnecessary code.
* Changed read restriction from #define to #pragma once.
* Changed from sizeof to defined size.
* moved lib folder to crkbdroot.
removed warning of ws2812.d
* - Fixed DK60 version in config.h
* - Updated dk60 readme with new QMK rules
* - Fixed wording in readme
* Added dbroqua layout for DZ60
I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).
With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.
Regards
* Updated dbroqua layout for HHKB keyboard
Added default configuration and alternate (swap gui/alt keys).
Save user choice in keyboard memory (like plank, thanks for this
feature!).
* Added dbroqua layout for Iris keyboard
* Updated layout and fixed includes
* Added personal layout for FC660C
* Add support for my Falbatech Atreus
This is currently the default Atreus keyboard layout, but I will
eventually customize it to match my Ergodox layout.
* Address review comments
* More review comments fixed
* More review comments fixed
