Update to drashna userspace and keymaps (#4459)
* Fix reversed bool check in layer_state_set * Add Quefrency 65 for a friend * Add Ergodox EZ Glow keymap * Add RGB Matrix Code * Further changes to rgb matrix ErgoDox EZ * Update bjohnson keymaps * Fix CRKBD display * Overhaul to corne keyboard * Narrow scope for keylogger * Minor layout tweaks to Corne Keyboard * additional CRKBD tweaks * Minor tweaks to CRKBD * Add all characters for keylogger * Ergodox EZ Glow overhaul * Fix Ergodox EZ Glow layer colors * Increase Tapping Term for Corne Keyboard * Fix unicode-ish * Revert some changes * Add layer specific lighting effects * Some minor tweaks to ergodox glow config * revert changes to ergodox files * Update Glow readme * Add more tapping term defines * Fix changes * Fix ergodox keymap * Hopefully fix sleeping * Disable layer indications if rgb matrix is disabled * Add support for sleeping and rgb layer change toggle to ergodox ez glow * Make RGB Layer Indication Great Again * Make Unicode Great Again * Remove placeholder define Co-Authored-By: drashna <drashna@live.com> * Remove placeholder define Co-Authored-By: drashna <drashna@live.com> * Remove old EEPROM Reset keycode
This commit is contained in:
Drashna Jaelre
MechMerlin
parent
edb6c98fd2
commit
ecd21b44a8
@ -41,5 +41,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 120
|
||||
#define RGBLIGHT_LIMIT_VAL 100
|
||||
#endif
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
#define B6_AUDIO
|
||||
// #define NO_MUSIC_MODE
|
||||
#endif
|
||||
|
||||
@ -26,10 +26,10 @@ enum crkbd_keycodes {
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
|
||||
) \
|
||||
LAYOUT_wrapper( \
|
||||
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSPC, \
|
||||
KC_TAB, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, \
|
||||
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \
|
||||
KC_TAB, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RGUI_T(KC_QUOT), \
|
||||
OS_LSFT, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, CTL_T(K2A), OS_RSFT, \
|
||||
LT(_LOWER,KC_GRV), KC_SPC, LALT_T(KC_BSPC), KC_DEL, KC_ENT, RAISE \
|
||||
LT(_LOWER,KC_GRV), KC_SPC, KC_BSPC, KC_DEL, KC_ENT, RAISE \
|
||||
)
|
||||
#define LAYOUT_crkbd_base_wrapper(...) LAYOUT_crkbd_base(__VA_ARGS__)
|
||||
|
||||
@ -66,14 +66,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
),
|
||||
|
||||
[_LOWER] = LAYOUT_wrapper(
|
||||
KC_TILD, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_BSPC,
|
||||
KC_F11, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE,
|
||||
KC_F12, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______,
|
||||
KC_F11, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11,
|
||||
KC_F12, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE,
|
||||
_______, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______,
|
||||
_______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_wrapper( \
|
||||
KC_GRV, _________________RAISE_L1__________________, _________________RAISE_R1__________________, KC_BSPC,
|
||||
_______, _________________RAISE_L1__________________, _________________RAISE_R1__________________, _______,
|
||||
_______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS,
|
||||
_______, _________________RAISE_L3__________________, _________________RAISE_R3__________________, _______,
|
||||
_______, _______, _______, _______, _______, _______
|
||||
@ -81,18 +81,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_ADJUST] = LAYOUT_wrapper( \
|
||||
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
|
||||
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EPRM,
|
||||
TG_MODS, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
|
||||
_______, _______, _______, _______, _______, _______
|
||||
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
|
||||
_______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
|
||||
_______, _______, _______, KC_NUKE, TG_MODS, _______
|
||||
)
|
||||
};
|
||||
|
||||
int RGB_current_mode;
|
||||
|
||||
void matrix_init_keymap(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
RGB_current_mode = rgblight_config.mode;
|
||||
#endif
|
||||
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
iota_gfx_init(!has_usb()); // turns on the display
|
||||
@ -102,53 +97,118 @@ void matrix_init_keymap(void) {
|
||||
PORTD &= ~(1<<5);
|
||||
|
||||
DDRB &= ~(1<<0);
|
||||
PORTB &= ~(1<<0);}
|
||||
PORTB &= ~(1<<0);
|
||||
}
|
||||
|
||||
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
|
||||
// When add source files to SRC in rules.mk, you can use functions.
|
||||
const char *read_layer_state(void);
|
||||
const char *read_logo(void);
|
||||
void set_keylog(uint16_t keycode, keyrecord_t *record);
|
||||
const char *read_keylog(void);
|
||||
const char *read_keylogs(void);
|
||||
char layer_state_str[24];
|
||||
char modifier_state_str[24];
|
||||
char host_led_state_str[24];
|
||||
char keylog_str[24] = {};
|
||||
char keylogs_str[21] = {};
|
||||
int keylogs_str_idx = 0;
|
||||
|
||||
// const char *read_mode_icon(bool swap);
|
||||
const char *read_host_led_state(void);
|
||||
// void set_timelog(void);
|
||||
// const char *read_timelog(void);
|
||||
|
||||
const char code_to_name[60] = {
|
||||
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
|
||||
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
|
||||
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
|
||||
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
|
||||
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
|
||||
'#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
|
||||
|
||||
void set_keylog(uint16_t keycode, keyrecord_t *record) {
|
||||
char name = ' ';
|
||||
if (keycode < 60) {
|
||||
name = code_to_name[keycode];
|
||||
}
|
||||
|
||||
// update keylog
|
||||
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
|
||||
record->event.key.row, record->event.key.col,
|
||||
keycode, name);
|
||||
|
||||
// update keylogs
|
||||
if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
|
||||
keylogs_str_idx = 0;
|
||||
for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
|
||||
keylogs_str[i] = ' ';
|
||||
}
|
||||
}
|
||||
|
||||
keylogs_str[keylogs_str_idx] = name;
|
||||
keylogs_str_idx++;
|
||||
}
|
||||
|
||||
const char *read_keylog(void) {
|
||||
return keylog_str;
|
||||
}
|
||||
|
||||
const char *read_keylogs(void) {
|
||||
return keylogs_str;
|
||||
}
|
||||
|
||||
|
||||
const char* read_modifier_state(void) {
|
||||
uint8_t modifiers = get_mods();
|
||||
uint8_t one_shot = get_oneshot_mods();
|
||||
|
||||
snprintf(modifier_state_str, sizeof(modifier_state_str), "Mods:%s %s %s %s",
|
||||
(modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL" : " ",
|
||||
(modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI" : " ",
|
||||
(modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT" : " ",
|
||||
(modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : " "
|
||||
);
|
||||
|
||||
return modifier_state_str;
|
||||
}
|
||||
|
||||
const char *read_host_led_state(void) {
|
||||
uint8_t leds = host_keyboard_leds();
|
||||
|
||||
snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
|
||||
(leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
|
||||
(leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
|
||||
(leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "
|
||||
);
|
||||
|
||||
return host_led_state_str;
|
||||
}
|
||||
|
||||
const char* read_layer_state(void) {
|
||||
switch (layer_state) {
|
||||
case _QWERTY:
|
||||
switch (default_layer_state) {
|
||||
switch (biton32(layer_state)) {
|
||||
case _RAISE:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise ");
|
||||
break;
|
||||
case _LOWER:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower ");
|
||||
break;
|
||||
case _ADJUST:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust ");
|
||||
break;
|
||||
default:
|
||||
switch (biton32(default_layer_state)) {
|
||||
case _QWERTY:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: QWERTY");
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Qwerty ");
|
||||
break;
|
||||
case _COLEMAK:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak");
|
||||
break;
|
||||
case _DVORAK:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak");
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak ");
|
||||
break;
|
||||
case _WORKMAN:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Workman");
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case _RAISE:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
|
||||
break;
|
||||
case _LOWER:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
|
||||
break;
|
||||
case _ADJUST:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
|
||||
break;
|
||||
default:
|
||||
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
|
||||
}
|
||||
|
||||
return layer_state_str;
|
||||
@ -160,12 +220,13 @@ void matrix_scan_keymap(void) {
|
||||
|
||||
void matrix_render_user(struct CharacterMatrix *matrix) {
|
||||
if (is_master) {
|
||||
// If you want to change the display of OLED, you need to change here
|
||||
//If you want to change the display of OLED, you need to change here
|
||||
matrix_write_ln(matrix, read_layer_state());
|
||||
matrix_write_ln(matrix, read_keylog());
|
||||
matrix_write_ln(matrix, read_modifier_state());
|
||||
// matrix_write_ln(matrix, read_keylog());
|
||||
matrix_write_ln(matrix, read_keylogs());
|
||||
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
|
||||
matrix_write_ln(matrix, read_host_led_state());
|
||||
// matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
|
||||
matrix_write(matrix, read_host_led_state());
|
||||
//matrix_write_ln(matrix, read_timelog());
|
||||
} else {
|
||||
matrix_write(matrix, read_logo());
|
||||
@ -187,8 +248,14 @@ void iota_gfx_task_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
set_keylog(keycode, record);
|
||||
switch (keycode) {
|
||||
case KC_A ... KC_SLASH:
|
||||
case KC_F1 ... KC_F12:
|
||||
case KC_INSERT ... KC_UP:
|
||||
case KC_KP_SLASH ... KC_KP_DOT:
|
||||
case KC_F13 ... KC_F24:
|
||||
if (record->event.pressed) { set_keylog(keycode, record); }
|
||||
break;
|
||||
// set_timelog();
|
||||
}
|
||||
return true;
|
||||
|
||||
@ -20,12 +20,14 @@ SWAP_HANDS_ENABLE = no # Enable one-hand typing
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# If you want to change the display of OLED, you need to change here
|
||||
SRC += ./lib/glcdfont.c \
|
||||
./lib/rgb_state_reader.c \
|
||||
./lib/logo_reader.c \
|
||||
./lib/keylogger.c \
|
||||
./lib/host_led_state_reader.c \
|
||||
# ./lib/layer_state_reader.c \
|
||||
# ./lib/keylogger.c \
|
||||
# ./lib/host_led_state_reader.c \
|
||||
# ./lib/mode_icon_reader.c \
|
||||
# ./lib/layer_state_reader.c \
|
||||
# ./lib/timelogger.c \
|
||||
|
||||
@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_ADJUST] = LAYOUT_wrapper(
|
||||
KC_MAKE, _______, _______, _______, _______, _______, _________________ADJUST_R1_________________, KC_RST,
|
||||
VRSN, _________________ADJUST_L1_________________, KC_NUKE, _______, _______, _______, _______, EPRM,
|
||||
VRSN, _________________ADJUST_L1_________________, KC_NUKE, _______, _______, _______, _______, EEP_RST,
|
||||
_______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS,
|
||||
_______, _________________ADJUST_L3_________________, TG_GAME, _______, _________________ADJUST_R3_________________, KC_MPLY,
|
||||
_______, _______, _______, _______, _______, _______
|
||||
|
||||
@ -8,7 +8,7 @@ RGBLIGHT_ENABLE = yes
|
||||
AUDIO_ENABLE = yes
|
||||
NKRO_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
SWAP_HANDS_ENABLE = yes
|
||||
SWAP_HANDS_ENABLE = no
|
||||
|
||||
INDICATOR_LIGHTS = yes
|
||||
MACROS_ENABLED = no
|
||||
|
||||
@ -91,7 +91,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_ADJUST] = LAYOUT_wrapper(\
|
||||
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
|
||||
VRSN, _________________ADJUST_L2_________________, _______, _______, _______, KC_NUKE, _________________ADJUST_R2_________________, EPRM,
|
||||
VRSN, _________________ADJUST_L2_________________, _______, _______, _______, KC_NUKE, _________________ADJUST_R2_________________, EEP_RST,
|
||||
TG_MODS, _________________ADJUST_L3_________________, _______, _______, _______, _______, _______, _______, _________________ADJUST_R3_________________, KC_MPLY
|
||||
)
|
||||
};
|
||||
|
||||
41
keyboards/quefrency/keymaps/bjohnson/config.h
Normal file
41
keyboards/quefrency/keymaps/bjohnson/config.h
Normal file
@ -0,0 +1,41 @@
|
||||
/*
|
||||
This is the c configuration file for the keymap
|
||||
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2015 Jack Humbert
|
||||
Copyright 2018 Danny Nguyen <danny@keeb.io>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
#define USE_SERIAL
|
||||
// #define USE_I2C
|
||||
|
||||
#define TAPPING_TERM 500
|
||||
|
||||
#define IGNORE_MOD_TAP_INTERRUPT
|
||||
#define PERMISSIVE_HOLD
|
||||
#define FORCE_NKRO
|
||||
#define RETRO_TAPPING
|
||||
|
||||
#define TAPPING_TOGGLE 1
|
||||
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
||||
#define RGBLIGHT_SLEEP
|
||||
33
keyboards/quefrency/keymaps/bjohnson/keymap.c
Normal file
33
keyboards/quefrency/keymaps/bjohnson/keymap.c
Normal file
@ -0,0 +1,33 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BASE 0
|
||||
#define _FN1 1
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BASE] = LAYOUT_65(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_HOME, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_INS, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, LT(_FN1,KC_SPC),KC_SPC, KC_SPC, XXXXXXX, KC_RALT, KC_RGUI, XXXXXXX, KC_APP, KC_RCTL, TT(_FN1)
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_65(
|
||||
KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_BSPC, KC_PGUP, \
|
||||
_______, _______, KC_UP, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, _______, _______, KC_PGDN, \
|
||||
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, \
|
||||
_______, RGB_MOD, RGB_HUI, RGB_HUD, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, KC_P0, XXXXXXX, _______, _______, XXXXXXX, _______, _______, _______
|
||||
)
|
||||
};
|
||||
22
keyboards/quefrency/keymaps/bjohnson/rules.mk
Normal file
22
keyboards/quefrency/keymaps/bjohnson/rules.mk
Normal file
@ -0,0 +1,22 @@
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = yes # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_MEDIA] = LAYOUT_ortho_5x7(
|
||||
KC_MAKE, KC_RESET,MU_TOG, AU_ON, AU_OFF, CK_TOGG, RGB_SAD,
|
||||
MEDIA, EPRM, KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
|
||||
MEDIA, EEP_RST, KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
|
||||
RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_HUD,
|
||||
KC_MPLY, KC_MPRV, KC_MNXT, RGB_M_X, RGB_M_G, RGB_M_P, RGB_HUI,
|
||||
KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, RGB_VAD, RGB_VAI
|
||||
@ -94,5 +94,3 @@ void matrix_init_keymap(void) {
|
||||
DDRB &= ~(1<<0);
|
||||
PORTB &= ~(1<<0);
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -20,8 +20,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#ifdef UNICODEMAP_ENABLE
|
||||
#include "drashna_unicode.h"
|
||||
#endif // UNICODEMAP_ENABLE
|
||||
extern uint8_t input_mode;
|
||||
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
extern bool g_suspend_state;
|
||||
extern rgb_config_t rgb_matrix_config;
|
||||
#endif
|
||||
extern userspace_config_t userspace_config;
|
||||
|
||||
//enum more_custom_keycodes {
|
||||
// KC_P00 = NEW_SAFE_RANGE
|
||||
@ -40,7 +45,7 @@ bool skip_leds = false;
|
||||
KC_TAB, K01, K02, K03, K04, K05, TG(_DIABLO), TG(_DIABLO), K06, K07, K08, K09, K0A, KC_BSLS, \
|
||||
KC_C1R3, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, \
|
||||
KC_MLSF, CTL_T(K21), K22, K23, K24, K25, TG(_GAMEPAD), TG(_GAMEPAD), K26, K27, K28, K29, CTL_T(K2A), KC_MRSF, \
|
||||
KC_GRV, OSM(MOD_MEH),OSM(MOD_LGUI),KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, UC_SHRG, \
|
||||
KC_GRV, OS_MEH, OS_HYPR, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, UC(0x2E2E), \
|
||||
OS_LALT, OS_LGUI, OS_RGUI, CTL_T(KC_ESCAPE), \
|
||||
KC_HOME, KC_PGUP, \
|
||||
LT(_LOWER, KC_SPACE),KC_BSPC, KC_END, KC_PGDN, KC_DEL, LT(_RAISE, KC_ENTER) \
|
||||
@ -198,7 +203,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
*/
|
||||
[_GAMEPAD] = LAYOUT_ergodox_pretty_wrapper(
|
||||
KC_ESC, KC_NO, KC_1, KC_2, KC_3, HYPR(KC_Q), HYPR(KC_GRV), KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO,
|
||||
KC_F1, KC_K, KC_Q, KC_W, KC_E, KC_R, KC_T, UC_SHRG, UC_DISA, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_F1, KC_K, KC_Q, KC_W, KC_E, KC_R, KC_T, UC_SHRG, UC_DISA, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_TAB, KC_G, KC_A, KC_S, KC_D, KC_F, KC_I, KC_O, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_LCTL, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_TRNS, TG(_GAMEPAD), KC_N, KC_M, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_GRV, KC_U, KC_I, KC_Y, KC_T, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO,
|
||||
@ -263,7 +268,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_ADJUST] = LAYOUT_ergodox_pretty_wrapper(
|
||||
KC_MAKE, _______, _______, _______, _______, _______, _______, KC_NUKE, _________________ADJUST_R1_________________, KC_RST,
|
||||
VRSN, _________________ADJUST_L1_________________, _______, _______, _______, _______, _______, _______, _______, EPRM,
|
||||
VRSN, _________________ADJUST_L1_________________, _______, _______, _______, _______, _______, _______, _______, EEP_RST,
|
||||
_______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG(_MODS),
|
||||
_______, _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, KC_MPLY,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
@ -290,10 +295,6 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void matrix_init_keymap(void) { // Runs boot tasks for keyboard
|
||||
};
|
||||
|
||||
|
||||
void matrix_scan_keymap(void) { // runs frequently to update info
|
||||
uint8_t modifiers = get_mods();
|
||||
uint8_t led_usb_state = host_keyboard_leds();
|
||||
@ -335,3 +336,106 @@ bool indicator_is_this_led_used_keyboard(uint8_t index) {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
|
||||
void suspend_power_down_keymap(void) {
|
||||
rgb_matrix_set_suspend_state(true);
|
||||
rgb_matrix_config.enable = false;
|
||||
}
|
||||
|
||||
void suspend_wakeup_init_keymap(void) {
|
||||
rgb_matrix_config.enable = true;
|
||||
rgb_matrix_set_suspend_state(false);
|
||||
}
|
||||
|
||||
void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue) {
|
||||
rgb_led led;
|
||||
for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
|
||||
led = g_rgb_leds[i];
|
||||
if (led.matrix_co.raw < 0xFF) {
|
||||
if (led.modifier) {
|
||||
rgb_matrix_set_color( i, red, green, blue );
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void rgb_matrix_indicators_user(void) {
|
||||
if (g_suspend_state || !rgb_matrix_config.enable || !userspace_config.rgb_layer_change) return;
|
||||
|
||||
switch (biton32(layer_state)) {
|
||||
case _MODS:
|
||||
rgb_matrix_layer_helper(0xFF, 0xFF, 0x00); break;
|
||||
case _GAMEPAD:
|
||||
rgb_matrix_layer_helper(0xFF, 0x80, 0x00);
|
||||
rgb_matrix_set_color(32, 0x00, 0xFF, 0x00); // Q
|
||||
rgb_matrix_set_color(31, 0x00, 0xFF, 0xFF); // W
|
||||
rgb_matrix_set_color(30, 0xFF, 0x00, 0x00); // E
|
||||
rgb_matrix_set_color(29, 0xFF, 0x80, 0x00); // R
|
||||
rgb_matrix_set_color(37, 0x00, 0xFF, 0xFF); // A
|
||||
rgb_matrix_set_color(36, 0x00, 0xFF, 0xFF); // S
|
||||
rgb_matrix_set_color(35, 0x00, 0xFF, 0xFF); // D
|
||||
rgb_matrix_set_color(34, 0x7A, 0x00, 0xFF); // F
|
||||
|
||||
rgb_matrix_set_color(27, 0xFF, 0xFF, 0xFF); // 1
|
||||
rgb_matrix_set_color(26, 0x00, 0xFF, 0x00); // 2
|
||||
rgb_matrix_set_color(25, 0x7A, 0x00, 0xFF); // 3
|
||||
|
||||
break;
|
||||
case _DIABLO:
|
||||
rgb_matrix_layer_helper(0xFF, 0x00, 0x00); break;
|
||||
case _RAISE:
|
||||
rgb_matrix_layer_helper(0xFF, 0xFF, 0x00); break;
|
||||
case _LOWER:
|
||||
rgb_matrix_layer_helper(0x00, 0xFF, 0x00); break;
|
||||
case _ADJUST:
|
||||
rgb_matrix_layer_helper(0xFF, 0x00, 0x00); break;
|
||||
default:
|
||||
switch (biton32(default_layer_state)) {
|
||||
case _QWERTY:
|
||||
rgb_matrix_layer_helper(0x00, 0xFF, 0xFF); break;
|
||||
case _COLEMAK:
|
||||
rgb_matrix_layer_helper(0xFF, 0x00, 0xFF); break;
|
||||
case _DVORAK:
|
||||
rgb_matrix_layer_helper(0x00, 0xFF, 0x00); break;
|
||||
case _WORKMAN:
|
||||
rgb_matrix_layer_helper(0xD9, 0xA5, 0x21); break;
|
||||
}
|
||||
}
|
||||
#if 0
|
||||
if (this_mod & MODS_SHIFT_MASK || this_led & (1<<USB_LED_CAPS_LOCK) || this_osm & MODS_SHIFT_MASK) {
|
||||
rgb_matrix_set_color(24, 0x00, 0xFF, 0x00);
|
||||
rgb_matrix_set_color(36, 0x00, 0xFF, 0x00);
|
||||
}
|
||||
if (this_mod & MODS_CTRL_MASK || this_osm & MODS_CTRL_MASK) {
|
||||
rgb_matrix_set_color(25, 0xFF, 0x00, 0x00);
|
||||
rgb_matrix_set_color(34, 0xFF, 0x00, 0x00);
|
||||
rgb_matrix_set_color(37, 0xFF, 0x00, 0x00);
|
||||
|
||||
}
|
||||
if (this_mod & MODS_GUI_MASK || this_osm & MODS_GUI_MASK) {
|
||||
rgb_matrix_set_color(39, 0xFF, 0xD9, 0x00);
|
||||
}
|
||||
if (this_mod & MODS_ALT_MASK || this_osm & MODS_ALT_MASK) {
|
||||
rgb_matrix_set_color(38, 0x00, 0x00, 0xFF);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void matrix_init_keymap(void) {
|
||||
#ifdef RGB_MATRIX_KEYPRESSES
|
||||
rgblight_mode(RGB_MATRIX_MULTISPLASH);
|
||||
#else
|
||||
rgblight_mode(RGB_MATRIX_RAINBOW_MOVING_CHEVRON);
|
||||
#endif
|
||||
|
||||
input_mode = 2;
|
||||
}
|
||||
|
||||
#else
|
||||
void matrix_init_keymap(void) {
|
||||
input_mode = 2;
|
||||
}
|
||||
#endif //RGB_MATRIX_INIT
|
||||
|
||||
1
layouts/community/ergodox/drashna_glow/README.md
Normal file
1
layouts/community/ergodox/drashna_glow/README.md
Normal file
@ -0,0 +1 @@
|
||||
Note: This board will not flash if the "g_rgb_leds" const is not set to weak in the ergodox_ez.c file
|
||||
11
layouts/community/ergodox/drashna_glow/config.h
Normal file
11
layouts/community/ergodox/drashna_glow/config.h
Normal file
@ -0,0 +1,11 @@
|
||||
#pragma once
|
||||
|
||||
#include "../drashna/config.h"
|
||||
|
||||
#undef PRODUCT
|
||||
#define PRODUCT DrashnaDox - Hacked ErgoDox EZ Glow
|
||||
|
||||
#undef DEBOUNCE
|
||||
#define DEBOUNCE 5
|
||||
|
||||
// #define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
|
||||
67
layouts/community/ergodox/drashna_glow/keymap.c
Normal file
67
layouts/community/ergodox/drashna_glow/keymap.c
Normal file
@ -0,0 +1,67 @@
|
||||
/* placeholder file */
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
|
||||
|
||||
/*{row | col << 4}
|
||||
| {x=0..224, y=0..64}
|
||||
| | modifier
|
||||
| | | */
|
||||
{{0|(0<<4)}, {24.9*5, 16*0}, 0}, // LED 1 on right
|
||||
{{0|(1<<4)}, {24.9*6, 16*0}, 0}, // LED 2
|
||||
{{0|(2<<4)}, {24.9*7, 16*0}, 0}, // LED 3
|
||||
{{0|(3<<4)}, {24.9*8, 16*0}, 0}, // LED 4
|
||||
{{0|(4<<4)}, {24.9*9, 16*0}, 0}, // LED 5
|
||||
|
||||
{{1|(5<<4)}, {24.9*5, 16*1}, 0}, // LED 6
|
||||
{{1|(6<<4)}, {24.9*6, 16*1}, 0}, // LED 7
|
||||
{{1|(7<<4)}, {24.9*7, 16*1}, 0}, // LED 8
|
||||
{{1|(8<<4)}, {24.9*8, 16*1}, 0}, // LED 9
|
||||
{{1|(9<<4)}, {24.9*9, 16*1}, 0}, // LED 10
|
||||
|
||||
{{2|(5<<4)}, {24.9*5, 16*2}, 0}, // LED 11
|
||||
{{2|(6<<4)}, {24.9*6, 16*2}, 0}, // LED 12
|
||||
{{2|(7<<4)}, {24.9*7, 16*2}, 0}, // LED 13
|
||||
{{2|(8<<4)}, {24.9*8, 16*2}, 0}, // LED 14
|
||||
{{2|(9<<4)}, {24.9*9, 16*2}, 0}, // LED 15
|
||||
|
||||
{{3|(5<<4)}, {24.9*5, 16*2}, 0}, // LED 16
|
||||
{{3|(6<<4)}, {24.9*6, 16*2}, 0}, // LED 17
|
||||
{{3|(7<<4)}, {24.9*7, 16*2}, 0}, // LED 18
|
||||
{{3|(8<<4)}, {24.9*8, 16*2}, 0}, // LED 19
|
||||
{{3|(9<<4)}, {24.9*9, 16*2}, 0}, // LED 20
|
||||
|
||||
{{4|(6<<4)}, {24.9*6, 16*2}, 1}, // LED 21
|
||||
{{4|(7<<4)}, {24.9*7, 16*2}, 1}, // LED 22
|
||||
{{4|(8<<4)}, {24.9*8, 16*2}, 1}, // LED 23
|
||||
{{4|(9<<4)}, {24.9*9, 16*2}, 1}, // LED 24
|
||||
|
||||
{{0|(0<<4)}, {24.9*4, 16*0}, 0}, // LED 1 on left
|
||||
{{0|(1<<4)}, {24.9*3, 16*0}, 0}, // LED 2
|
||||
{{0|(2<<4)}, {24.9*2, 16*0}, 0}, // LED 3
|
||||
{{0|(3<<4)}, {24.9*1, 16*0}, 0}, // LED 4
|
||||
{{0|(4<<4)}, {24.9*0, 16*0}, 0}, // LED 5
|
||||
|
||||
{{1|(5<<4)}, {24.9*4, 16*1}, 0}, // LED 6
|
||||
{{1|(6<<4)}, {24.9*3, 16*1}, 0}, // LED 7
|
||||
{{1|(7<<4)}, {24.9*2, 16*1}, 0}, // LED 8
|
||||
{{1|(8<<4)}, {24.9*1, 16*1}, 0}, // LED 9
|
||||
{{1|(9<<4)}, {24.9*0, 16*1}, 0}, // LED 10
|
||||
|
||||
{{2|(5<<4)}, {24.9*4, 16*2}, 0}, // LED 11
|
||||
{{2|(6<<4)}, {24.9*3, 16*2}, 0}, // LED 12
|
||||
{{2|(7<<4)}, {24.9*2, 16*2}, 0}, // LED 13
|
||||
{{2|(8<<4)}, {24.9*1, 16*2}, 0}, // LED 14
|
||||
{{2|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 15
|
||||
|
||||
{{3|(5<<4)}, {24.9*4, 16*2}, 0}, // LED 16
|
||||
{{3|(6<<4)}, {24.9*3, 16*2}, 0}, // LED 17
|
||||
{{3|(7<<4)}, {24.9*2, 16*2}, 0}, // LED 18
|
||||
{{3|(8<<4)}, {24.9*1, 16*2}, 0}, // LED 19
|
||||
{{3|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 20
|
||||
|
||||
{{4|(6<<4)}, {24.9*3, 16*2}, 1}, // LED 21
|
||||
{{4|(7<<4)}, {24.9*2, 16*2}, 1}, // LED 22
|
||||
{{4|(8<<4)}, {24.9*1, 16*2}, 1}, // LED 23
|
||||
{{4|(9<<4)}, {24.9*0, 16*2}, 1}, // LED 24
|
||||
};
|
||||
9
layouts/community/ergodox/drashna_glow/rules.mk
Normal file
9
layouts/community/ergodox/drashna_glow/rules.mk
Normal file
@ -0,0 +1,9 @@
|
||||
USER_NAME := drashna
|
||||
SRC += ../drashna/keymap.c
|
||||
|
||||
-include $$(LAYOUT_KEYMAP_PATH)/../drashna/rules.mk
|
||||
|
||||
ifneq (,$(findstring ergodox_ez,$(KEYBOARD)))
|
||||
RGBLIGHT_ENABLE = no
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
endif
|
||||
@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_ADJUST] = LAYOUT_ortho_4x12_wrapper(
|
||||
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST,
|
||||
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EPRM,
|
||||
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
|
||||
_______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
|
||||
@ -57,8 +57,10 @@
|
||||
#ifdef TAPPING_TERM
|
||||
#undef TAPPING_TERM
|
||||
#endif // TAPPING_TERM
|
||||
#ifdef KEYBOARD_ergodox_ez
|
||||
#if defined(KEYBOARD_ergodox_ez)
|
||||
#define TAPPING_TERM 185
|
||||
#elif defined(KEYBOARD_crkbd)
|
||||
#define TAPPING_TERM 200
|
||||
#else
|
||||
#define TAPPING_TERM 175
|
||||
#endif
|
||||
|
||||
@ -173,12 +173,15 @@ void matrix_init_user(void) {
|
||||
get_unicode_input_mode();
|
||||
#endif //UNICODE_ENABLE
|
||||
matrix_init_keymap();
|
||||
}
|
||||
|
||||
void startup_user (void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
matrix_init_rgb();
|
||||
#endif //RGBLIGHT_ENABLE
|
||||
}
|
||||
|
||||
void startup_user (void) {
|
||||
// #ifdef RGBLIGHT_ENABLE
|
||||
// matrix_init_rgb();
|
||||
// #endif //RGBLIGHT_ENABLE
|
||||
startup_keymap();
|
||||
}
|
||||
|
||||
@ -294,11 +297,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
}
|
||||
break;
|
||||
|
||||
case EPRM: // Resets EEPROM
|
||||
if (record->event.pressed) {
|
||||
eeconfig_init();
|
||||
}
|
||||
break;
|
||||
case VRSN: // Prints firmware version
|
||||
if (record->event.pressed) {
|
||||
send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), MACRO_TIMER);
|
||||
@ -392,7 +390,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
#endif
|
||||
}
|
||||
return process_record_keymap(keycode, record) &&
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
|
||||
process_record_user_rgb(keycode, record) &&
|
||||
#endif // RGBLIGHT_ENABLE
|
||||
process_record_secrets(keycode, record);
|
||||
@ -413,7 +411,11 @@ uint32_t layer_state_set_user(uint32_t state) {
|
||||
|
||||
|
||||
uint32_t default_layer_state_set_user(uint32_t state) {
|
||||
return default_layer_state_set_keymap(state);
|
||||
state = default_layer_state_set_keymap(state);
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
state = default_layer_state_set_rgb(state);
|
||||
#endif // RGBLIGHT_ENABLE
|
||||
return state;
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -73,6 +73,8 @@ typedef union {
|
||||
};
|
||||
} userspace_config_t;
|
||||
|
||||
extern userspace_config_t userspace_config;
|
||||
|
||||
#if defined(KEYMAP_SAFE_RANGE)
|
||||
#define PLACEHOLDER_SAFE_RANGE KEYMAP_SAFE_RANGE
|
||||
#else
|
||||
@ -80,8 +82,7 @@ typedef union {
|
||||
#endif
|
||||
|
||||
enum userspace_custom_keycodes {
|
||||
EPRM = PLACEHOLDER_SAFE_RANGE, // Resets EEPROM do defaults (as in eeconfig_init)
|
||||
VRSN, // Prints QMK Firmware and board info
|
||||
VRSN = PLACEHOLDER_SAFE_RANGE, // Prints QMK Firmware and board info
|
||||
KC_QWERTY, // Sets default layer to QWERTY
|
||||
KC_COLEMAK, // Sets default layer to COLEMAK
|
||||
KC_DVORAK, // Sets default layer to DVORAK
|
||||
@ -159,6 +160,9 @@ enum userspace_custom_keycodes {
|
||||
#define OS_RCTL OSM(MOD_RCTL)
|
||||
#define OS_LALT OSM(MOD_LALT)
|
||||
#define OS_RALT OSM(MOD_RALT)
|
||||
#define OS_MEH OSM(MOD_MEH)
|
||||
#define OS_HYPR OSM(MOD_HYPR)
|
||||
|
||||
#define ALT_APP ALT_T(KC_APP)
|
||||
|
||||
#define MG_NKRO MAGIC_TOGGLE_NKRO
|
||||
|
||||
@ -2,8 +2,11 @@
|
||||
#include "rgb_stuff.h"
|
||||
#include "eeprom.h"
|
||||
|
||||
#if defined(RGBLIGHT_ENABLE)
|
||||
extern rgblight_config_t rgblight_config;
|
||||
extern userspace_config_t userspace_config;
|
||||
#elif defined(RGB_MATRIX_ENABLE)
|
||||
extern rgb_config_t rgb_matrix_config;
|
||||
#endif
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
void rgblight_sethsv_default_helper(uint8_t index) {
|
||||
@ -209,7 +212,7 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
|
||||
return true; break;
|
||||
#endif // RGBLIGHT_TWINKLE
|
||||
case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
|
||||
if (record->event.pressed) {
|
||||
userspace_config.rgb_layer_change ^= 1;
|
||||
xprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
|
||||
@ -237,24 +240,25 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
|
||||
|
||||
|
||||
|
||||
void matrix_init_rgb(void) {
|
||||
void matrix_init_rgb(void) {
|
||||
|
||||
if (userspace_config.rgb_layer_change) {
|
||||
rgblight_init();
|
||||
rgblight_enable_noeeprom();
|
||||
switch (biton32(eeconfig_read_default_layer())) {
|
||||
case _COLEMAK:
|
||||
rgblight_sethsv_noeeprom_magenta(); break;
|
||||
case _DVORAK:
|
||||
rgblight_sethsv_noeeprom_springgreen(); break;
|
||||
case _WORKMAN:
|
||||
rgblight_sethsv_noeeprom_goldenrod(); break;
|
||||
default:
|
||||
rgblight_sethsv_noeeprom_cyan(); break;
|
||||
}
|
||||
rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
|
||||
}
|
||||
}
|
||||
// #ifdef RGBLIGHT_ENABLE
|
||||
// if (userspace_config.rgb_layer_change) {
|
||||
// rgblight_enable_noeeprom();
|
||||
// switch (biton32(eeconfig_read_default_layer())) {
|
||||
// case _COLEMAK:
|
||||
// rgblight_sethsv_noeeprom_magenta(); break;
|
||||
// case _DVORAK:
|
||||
// rgblight_sethsv_noeeprom_springgreen(); break;
|
||||
// case _WORKMAN:
|
||||
// rgblight_sethsv_noeeprom_goldenrod(); break;
|
||||
// default:
|
||||
// rgblight_sethsv_noeeprom_cyan(); break;
|
||||
// }
|
||||
// rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
|
||||
// }
|
||||
// #endif
|
||||
}
|
||||
|
||||
void matrix_scan_rgb(void) {
|
||||
#ifdef RGBLIGHT_TWINKLE
|
||||
@ -270,7 +274,6 @@ void matrix_scan_rgb(void) {
|
||||
|
||||
uint32_t layer_state_set_rgb(uint32_t state) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
static bool has_ran;
|
||||
if (userspace_config.rgb_layer_change) {
|
||||
switch (biton32(state)) {
|
||||
case _MACROS:
|
||||
@ -312,12 +315,7 @@ uint32_t layer_state_set_rgb(uint32_t state) {
|
||||
default:
|
||||
rgblight_sethsv_noeeprom_cyan(); break;
|
||||
}
|
||||
if (has_ran) {
|
||||
biton32(state) == _MODS ? rgblight_mode(RGBLIGHT_MODE_BREATHING) : rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
|
||||
} else {
|
||||
biton32(state) == _MODS ? rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING) : rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
|
||||
has_ran = true;
|
||||
}
|
||||
biton32(state) == _MODS ? rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING) : rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
|
||||
break;
|
||||
}
|
||||
// layer_state_set_indicator(); // Runs every scan, so need to call this here .... since I can't get it working "right" anyhow
|
||||
@ -326,3 +324,39 @@ uint32_t layer_state_set_rgb(uint32_t state) {
|
||||
|
||||
return state;
|
||||
}
|
||||
|
||||
uint32_t default_layer_state_set_rgb(uint32_t state) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
if (userspace_config.rgb_layer_change) {
|
||||
rgblight_config_t temp_rgblight_config = rgblight_config;
|
||||
switch (biton32(state)) {
|
||||
case _COLEMAK:
|
||||
temp_rgblight_config.hue = 300;
|
||||
temp_rgblight_config.val = 255;
|
||||
temp_rgblight_config.sat = 255;
|
||||
temp_rgblight_config.mode = 1;
|
||||
break;
|
||||
case _DVORAK:
|
||||
temp_rgblight_config.hue = 150;
|
||||
temp_rgblight_config.val = 255;
|
||||
temp_rgblight_config.sat = 255;
|
||||
temp_rgblight_config.mode = 1;
|
||||
case _WORKMAN:
|
||||
temp_rgblight_config.hue = 43;
|
||||
temp_rgblight_config.val = 218;
|
||||
temp_rgblight_config.sat = 218;
|
||||
temp_rgblight_config.mode = 1;
|
||||
default:
|
||||
temp_rgblight_config.hue = 180;
|
||||
temp_rgblight_config.val = 255;
|
||||
temp_rgblight_config.sat = 255;
|
||||
temp_rgblight_config.mode = 1;
|
||||
}
|
||||
if (temp_rgblight_config.raw != eeconfig_read_rgblight()) {
|
||||
xprintf("rgblight set default layer hsv [EEPROM]: %u,%u,%u,%u\n", temp_rgblight_config.hue, temp_rgblight_config.sat, temp_rgblight_config.val, temp_rgblight_config.mode);
|
||||
eeconfig_update_rgblight(temp_rgblight_config.raw);
|
||||
}
|
||||
}
|
||||
#endif // RGBLIGHT_ENABLE
|
||||
return state;
|
||||
}
|
||||
|
||||
@ -12,4 +12,4 @@ void scan_rgblight_fadeout(void);
|
||||
void matrix_init_rgb(void);
|
||||
void matrix_scan_rgb(void);
|
||||
uint32_t layer_state_set_rgb(uint32_t state);
|
||||
|
||||
uint32_t default_layer_state_set_rgb(uint32_t state);
|
||||
|
||||
@ -27,6 +27,11 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
|
||||
endif
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
|
||||
SRC += rgb_stuff.c
|
||||
endif
|
||||
|
||||
|
||||
ifeq ($(strip $(MACROS_ENABLED)), yes)
|
||||
OPT_DEFS += -DMACROS_ENABLED
|
||||
endif
|
||||
@ -37,3 +42,15 @@ ifdef CONSOLE_ENABLE
|
||||
endif
|
||||
endif
|
||||
|
||||
|
||||
ifeq ($(strip $(UCIS_ENABLE)), yes)
|
||||
SRC += send_unicode.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
|
||||
SRC += send_unicode.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(UNICODE_ENABLE)), yes)
|
||||
SRC += send_unicode.c
|
||||
endif
|
||||
|
||||
@ -56,3 +56,57 @@ void send_unicode_hex_string(const char* str) {
|
||||
|
||||
|
||||
// If you need a good converter: https://r12a.github.io/app-conversion/
|
||||
uint8_t saved_mods;
|
||||
|
||||
void unicode_input_start (void) {
|
||||
// save current mods
|
||||
saved_mods = get_mods(); // Save current mods
|
||||
clear_mods(); // Unregister mods to start from a clean state
|
||||
|
||||
switch(get_unicode_input_mode()) {
|
||||
case UC_OSX:
|
||||
register_code(KC_LALT);
|
||||
break;
|
||||
case UC_OSX_RALT:
|
||||
register_code(KC_RALT);
|
||||
break;
|
||||
case UC_LNX:
|
||||
register_code(KC_LCTL);
|
||||
register_code(KC_LSFT);
|
||||
register_code(KC_U);
|
||||
unregister_code(KC_U);
|
||||
unregister_code(KC_LSFT);
|
||||
unregister_code(KC_LCTL);
|
||||
break;
|
||||
case UC_WIN:
|
||||
register_code(KC_LALT);
|
||||
register_code(KC_PPLS);
|
||||
unregister_code(KC_PPLS);
|
||||
break;
|
||||
case UC_WINC:
|
||||
register_code(KC_RALT);
|
||||
unregister_code(KC_RALT);
|
||||
register_code(KC_U);
|
||||
unregister_code(KC_U);
|
||||
break;
|
||||
}
|
||||
wait_ms(UNICODE_TYPE_DELAY);
|
||||
}
|
||||
|
||||
void unicode_input_finish (void) {
|
||||
switch(get_unicode_input_mode()) {
|
||||
case UC_OSX:
|
||||
case UC_WIN:
|
||||
unregister_code(KC_LALT);
|
||||
break;
|
||||
case UC_OSX_RALT:
|
||||
unregister_code(KC_RALT);
|
||||
break;
|
||||
case UC_LNX:
|
||||
register_code(KC_SPC);
|
||||
unregister_code(KC_SPC);
|
||||
break;
|
||||
}
|
||||
|
||||
set_mods(saved_mods); // Reregister previously set mods
|
||||
}
|
||||
|
||||
@ -50,12 +50,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return false;
|
||||
break;
|
||||
|
||||
case EPRM:
|
||||
if (record->event.pressed) {
|
||||
eeconfig_init();
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case VRSN:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
|
||||
@ -128,4 +122,3 @@ void shutdown_keymap(void) {}
|
||||
void shutdown_user (void) {
|
||||
shutdown_keymap();
|
||||
}
|
||||
|
||||
|
||||
@ -9,9 +9,7 @@
|
||||
#define BASE 0
|
||||
|
||||
enum custom_keycodes {
|
||||
PLACEHOLDER = SAFE_RANGE, // can always be here
|
||||
EPRM,
|
||||
VRSN,
|
||||
VRSN = SAFE_RANGE, // can always be here
|
||||
KC_MAKE,
|
||||
KC_RESET,
|
||||
NEWPLACEHOLDER //use "NEWPLACEHOLDER for keymap specific codes
|
||||
|
||||
Loading…
Reference in New Issue
Block a user