8a330b33ff
* Add final RGBKB Sol firmware * Apply suggestions from code review Apply most of the changes noroadsleft has suggested Co-Authored-By: Legonut <legonut3@gmail.com> * Cleanup readme * Cleanup keymaps per @noroadslefts suggestions * Remove eeproms, use set_single_persistent_default_layer * Suggestions from @noroadsleft and @drashna some small cleanup * Change RGB_SMOD to RGB_RMOD * fix RGB_SMOD * Apply suggestions from code review Remove redundant lines Co-Authored-By: Legonut <legonut3@gmail.com>
47 lines
1.7 KiB
Markdown
47 lines
1.7 KiB
Markdown
# KageUrufu's Sol Layout
|
|
|
|
Read the keymap for the layout, I don't want to deal with maintained ascii art
|
|
|
|
## Customize
|
|
|
|
see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk`
|
|
|
|
```
|
|
# Variables you can set for SOL
|
|
|
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix
|
|
LED_ANIMATIONS = yes # LED animations
|
|
LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
|
|
RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
|
|
RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500)
|
|
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
|
|
UNICODE_ENABLE = no # Unicode
|
|
SWAP_HANDS_ENABLE = no # Enable one-hand typing
|
|
ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
|
|
|
|
OLED_ENABLE = no # OLED_ENABLE (+5000)
|
|
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
|
|
|
|
```
|
|
## Compile
|
|
|
|
go to qmk top directory.
|
|
```
|
|
$ cd qmk_firmware
|
|
```
|
|
|
|
build
|
|
```
|
|
$ make sol:default
|
|
```
|
|
|
|
After the initial flash with AVRdudess, you should be able to flash using this:
|
|
```
|
|
$ make sol:default:dfu
|
|
``` |