23ce0b43b6
* updated read.md file * added image to flash hex on ergodone * corrected image link * updated direct image link * image with larger text
28 lines
1.2 KiB
Markdown
28 lines
1.2 KiB
Markdown
ErgoDone
|
|
===
|
|
|
|
|
|
|
|
ErgoDone is a modified ErgoDox with pre-soldered components made by K.T.E.C. It has different wiring and uses a Pro Micro instead of Teensy.
|
|
|
|
- Keyboard Maintainer: [Yu He](http://github.com/yuhe00)
|
|
- Hardware Supported:
|
|
- ErgoDone ver. 1.3 (tested)
|
|
- Hardware Availability: [KBDFans](https://kbdfans.myshopify.com/collections/pcb/products/ergodone-keyboard-pcb-1pcs-free-shipping?variant=37178300237)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ergodone-default
|
|
|
|
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
|
|
|
# Flashing the keyboard
|
|
|
|
The ErgoDone uses an HID bootloader rather than the Teensy one, and requires a different way of flashing the firmware.
|
|
|
|
1. While plugging in the USB cable, hold the two right-most keys on the top row of the left half of the ErgoDone to enter FLASH mode and flash a hex file.
|
|
|
|
2. Use the `hid_bootloader_cli` utlity from [TKG Toolkit](https://github.com/kairyu/tkg-toolkit):
|
|
|
|
hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_default
|