7960302242
* copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
75 lines
1.7 KiB
C
75 lines
1.7 KiB
C
#ifndef CONFIG_H
|
|
#define CONFIG_H
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
|
|
#define VENDOR_ID 0xFEEB
|
|
#define PRODUCT_ID 0x6060
|
|
#define DEVICE_VER 0x0001
|
|
#define MANUFACTURER MJT
|
|
#define PRODUCT Mitosis
|
|
#define DESCRIPTION q.m.k. keyboard firmware for Mitosis
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 5
|
|
#define MATRIX_COLS 10
|
|
|
|
// fix iPhone power adapter issue
|
|
#define USB_MAX_POWER_CONSUMPTION 50
|
|
// #define CATERINA_BOOTLOADER
|
|
|
|
/* define if matrix has ghost */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* number of backlight levels */
|
|
//#define BACKLIGHT_LEVELS 3
|
|
|
|
#define ONESHOT_TIMEOUT 500
|
|
|
|
|
|
/* key combination for command */
|
|
#define IS_COMMAND() ( \
|
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
|
)
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
#define PREVENT_STUCK_MODIFIERS
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
//#define NO_ACTION_MACRO
|
|
//#define NO_ACTION_FUNCTION
|
|
|
|
//UART settings for communication with the RF microcontroller
|
|
#define SERIAL_UART_BAUD 1000000
|
|
#define SERIAL_UART_DATA UDR1
|
|
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
|
|
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
|
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
|
|
#define SERIAL_UART_INIT() do { \
|
|
/* baud rate */ \
|
|
UBRR1L = SERIAL_UART_UBRR; \
|
|
/* baud rate */ \
|
|
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
|
/* enable TX and RX */ \
|
|
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
|
/* 8-bit data */ \
|
|
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
|
} while(0)
|
|
|
|
#endif
|