691 lines
21 KiB
Makefile
691 lines
21 KiB
Makefile
# Hey Emacs, this is a -*- makefile -*-
|
|
#----------------------------------------------------------------------------
|
|
# WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al.
|
|
#
|
|
# Released to the Public Domain
|
|
#
|
|
# Additional material for this makefile was written by:
|
|
# Peter Fleury
|
|
# Tim Henigan
|
|
# Colin O'Flynn
|
|
# Reiner Patommel
|
|
# Markus Pfaff
|
|
# Sander Pool
|
|
# Frederik Rouleau
|
|
# Carlos Lamas
|
|
#
|
|
|
|
|
|
|
|
# Output format. (can be srec, ihex, binary)
|
|
FORMAT = ihex
|
|
|
|
BUILD_DIR = .build
|
|
|
|
# Object files directory
|
|
# To put object files in current directory, use a dot (.), do NOT make
|
|
# this an empty or blank macro!
|
|
OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
|
|
|
|
|
|
# Optimization level, can be [0, 1, 2, 3, s].
|
|
# 0 = turn off optimization. s = optimize for size.
|
|
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
|
OPT = s
|
|
|
|
|
|
# Debugging format.
|
|
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
|
# AVR Studio 4.10 requires dwarf-2.
|
|
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
|
DEBUG = dwarf-2
|
|
|
|
COLOR ?= true
|
|
|
|
ifeq ($(COLOR),true)
|
|
NO_COLOR=\033[0m
|
|
OK_COLOR=\033[32;01m
|
|
ERROR_COLOR=\033[31;01m
|
|
WARN_COLOR=\033[33;01m
|
|
BLUE=\033[0;34m
|
|
BOLD=\033[1m
|
|
endif
|
|
|
|
ifdef quick
|
|
QUICK = $(quick)
|
|
endif
|
|
|
|
QUICK ?= false
|
|
AUTOGEN ?= false
|
|
|
|
ifneq ($(shell awk --version 2>/dev/null),)
|
|
AWK=awk
|
|
else
|
|
AWK=cat && test
|
|
endif
|
|
|
|
OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
|
|
ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
|
|
WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
|
|
|
|
ifndef $(SILENT)
|
|
SILENT = false
|
|
endif
|
|
|
|
TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
|
|
TAB_LOG_PLAIN = printf "$$LOG\n"
|
|
AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
|
|
AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
|
|
PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
|
|
PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
|
|
PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
|
|
PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
|
|
PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
|
|
BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
|
|
|
|
# List any extra directories to look for include files here.
|
|
# Each directory must be seperated by a space.
|
|
# Use forward slashes for directory separators.
|
|
# For a directory that has spaces, enclose it in quotes.
|
|
EXTRAINCDIRS = $(subst :, ,$(VPATH))
|
|
|
|
|
|
# Compiler flag to set the C Standard level.
|
|
# c89 = "ANSI" C
|
|
# gnu89 = c89 plus GCC extensions
|
|
# c99 = ISO C99 standard (not yet fully implemented)
|
|
# gnu99 = c99 plus GCC extensions
|
|
CSTANDARD = -std=gnu99
|
|
|
|
|
|
# Place -D or -U options here for C sources
|
|
CDEFS = -DF_CPU=$(F_CPU)UL
|
|
CDEFS += $(OPT_DEFS)
|
|
|
|
|
|
# Place -D or -U options here for ASM sources
|
|
ADEFS = -DF_CPU=$(F_CPU)
|
|
ADEFS += $(OPT_DEFS)
|
|
|
|
|
|
# Place -D or -U options here for C++ sources
|
|
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
|
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
|
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
|
CPPDEFS += $(OPT_DEFS)
|
|
|
|
|
|
|
|
#---------------- Compiler Options C ----------------
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CFLAGS = -g$(DEBUG)
|
|
CFLAGS += $(CDEFS)
|
|
CFLAGS += -O$(OPT)
|
|
CFLAGS += -funsigned-char
|
|
CFLAGS += -funsigned-bitfields
|
|
CFLAGS += -ffunction-sections
|
|
CFLAGS += -fdata-sections
|
|
CFLAGS += -fno-inline-small-functions
|
|
CFLAGS += -fpack-struct
|
|
CFLAGS += -fshort-enums
|
|
CFLAGS += -fno-strict-aliasing
|
|
# add color
|
|
ifeq ($(COLOR),true)
|
|
ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
|
|
CFLAGS+= -fdiagnostics-color
|
|
endif
|
|
endif
|
|
CFLAGS += -Wall
|
|
CFLAGS += -Wstrict-prototypes
|
|
#CFLAGS += -mshort-calls
|
|
#CFLAGS += -fno-unit-at-a-time
|
|
#CFLAGS += -Wundef
|
|
#CFLAGS += -Wunreachable-code
|
|
#CFLAGS += -Wsign-compare
|
|
CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
|
|
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
CFLAGS += $(CSTANDARD)
|
|
ifdef CONFIG_H
|
|
CFLAGS += -include $(CONFIG_H)
|
|
endif
|
|
|
|
|
|
#---------------- Compiler Options C++ ----------------
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CPPFLAGS = -g$(DEBUG)
|
|
CPPFLAGS += $(CPPDEFS)
|
|
CPPFLAGS += -O$(OPT)
|
|
CPPFLAGS += -funsigned-char
|
|
CPPFLAGS += -funsigned-bitfields
|
|
CPPFLAGS += -fpack-struct
|
|
CPPFLAGS += -fshort-enums
|
|
CPPFLAGS += -fno-exceptions
|
|
CPPFLAGS += -ffunction-sections
|
|
CPPFLAGS += -fdata-sections
|
|
# to supress "warning: only initialized variables can be placed into program memory area"
|
|
CPPFLAGS += -w
|
|
CPPFLAGS += -Wall
|
|
CPPFLAGS += -Wundef
|
|
#CPPFLAGS += -mshort-calls
|
|
#CPPFLAGS += -fno-unit-at-a-time
|
|
#CPPFLAGS += -Wstrict-prototypes
|
|
#CPPFLAGS += -Wunreachable-code
|
|
#CPPFLAGS += -Wsign-compare
|
|
CPPFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
|
|
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
#CPPFLAGS += $(CSTANDARD)
|
|
ifdef CONFIG_H
|
|
CPPFLAGS += -include $(CONFIG_H)
|
|
endif
|
|
|
|
|
|
#---------------- Assembler Options ----------------
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns: create listing
|
|
# -gstabs: have the assembler create line number information; note that
|
|
# for use in COFF files, additional information about filenames
|
|
# and function names needs to be present in the assembler source
|
|
# files -- see avr-libc docs [FIXME: not yet described there]
|
|
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
|
# dump that will be displayed for a given single line of source input.
|
|
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
|
|
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
ifdef CONFIG_H
|
|
ASFLAGS += -include $(CONFIG_H)
|
|
endif
|
|
|
|
#---------------- Library Options ----------------
|
|
# Minimalistic printf version
|
|
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
|
|
|
# Floating point printf version (requires MATH_LIB = -lm below)
|
|
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
|
|
|
# If this is left blank, then it will use the Standard printf version.
|
|
PRINTF_LIB =
|
|
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
|
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
|
|
|
|
|
# Minimalistic scanf version
|
|
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
|
|
|
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
|
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
|
|
|
# If this is left blank, then it will use the Standard scanf version.
|
|
SCANF_LIB =
|
|
#SCANF_LIB = $(SCANF_LIB_MIN)
|
|
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
|
|
|
|
|
MATH_LIB = -lm
|
|
|
|
|
|
# List any extra directories to look for libraries here.
|
|
# Each directory must be seperated by a space.
|
|
# Use forward slashes for directory separators.
|
|
# For a directory that has spaces, enclose it in quotes.
|
|
EXTRALIBDIRS =
|
|
|
|
|
|
|
|
#---------------- External Memory Options ----------------
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# used for variables (.data/.bss) and heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# only used for heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
EXTMEMOPTS =
|
|
|
|
|
|
|
|
#---------------- Linker Options ----------------
|
|
# -Wl,...: tell GCC to pass this to linker.
|
|
# -Map: create map file
|
|
# --cref: add cross reference to map file
|
|
#
|
|
# Comennt out "--relax" option to avoid a error such:
|
|
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
|
|
#
|
|
LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
|
|
#LDFLAGS += -Wl,--relax
|
|
LDFLAGS += -Wl,--gc-sections
|
|
LDFLAGS += $(EXTMEMOPTS)
|
|
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
|
|
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
|
#LDFLAGS += -T linker_script.x
|
|
# You can give EXTRALDFLAGS at 'make' command line.
|
|
LDFLAGS += $(EXTRALDFLAGS)
|
|
|
|
|
|
|
|
#---------------- Debugging Options ----------------
|
|
|
|
# For simulavr only - target MCU frequency.
|
|
DEBUG_MFREQ = $(F_CPU)
|
|
|
|
# Set the DEBUG_UI to either gdb or insight.
|
|
# DEBUG_UI = gdb
|
|
DEBUG_UI = insight
|
|
|
|
# Set the debugging back-end to either avarice, simulavr.
|
|
DEBUG_BACKEND = avarice
|
|
#DEBUG_BACKEND = simulavr
|
|
|
|
# GDB Init Filename.
|
|
GDBINIT_FILE = __avr_gdbinit
|
|
|
|
# When using avarice settings for the JTAG
|
|
JTAG_DEV = /dev/com1
|
|
|
|
# Debugging port used to communicate between GDB / avarice / simulavr.
|
|
DEBUG_PORT = 4242
|
|
|
|
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
|
# just set to localhost unless doing some sort of crazy debugging when
|
|
# avarice is running on a different computer.
|
|
DEBUG_HOST = localhost
|
|
|
|
|
|
|
|
#============================================================================
|
|
|
|
|
|
# Define programs and commands.
|
|
SHELL = sh
|
|
CC = avr-gcc
|
|
OBJCOPY = avr-objcopy
|
|
OBJDUMP = avr-objdump
|
|
SIZE = avr-size
|
|
AR = avr-ar rcs
|
|
NM = avr-nm
|
|
REMOVE = rm -f
|
|
REMOVEDIR = rmdir
|
|
COPY = cp
|
|
WINSHELL = cmd
|
|
SECHO = $(SILENT) || echo
|
|
# Autodecct teensy loader
|
|
ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
|
|
TEENSY_LOADER_CLI = teensy-loader-cli
|
|
else
|
|
TEENSY_LOADER_CLI = teensy_loader_cli
|
|
endif
|
|
|
|
# Define Messages
|
|
# English
|
|
MSG_ERRORS_NONE = Errors: none
|
|
MSG_BEGIN = -------- begin --------
|
|
MSG_END = -------- end --------
|
|
MSG_SIZE_BEFORE = Size before:
|
|
MSG_SIZE_AFTER = Size after:
|
|
MSG_COFF = Converting to AVR COFF:
|
|
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
|
MSG_FLASH = Creating load file for Flash:
|
|
MSG_EEPROM = Creating load file for EEPROM:
|
|
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
|
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
|
MSG_LINKING = Linking:
|
|
MSG_COMPILING = Compiling:
|
|
MSG_COMPILING_CPP = Compiling:
|
|
MSG_ASSEMBLING = Assembling:
|
|
MSG_CLEANING = Cleaning project:
|
|
MSG_CREATING_LIBRARY = Creating library:
|
|
|
|
|
|
|
|
|
|
# Define all object files.
|
|
OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC))))
|
|
|
|
# Define all listing files.
|
|
LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC))))
|
|
|
|
|
|
# Compiler flags to generate dependency files.
|
|
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
|
GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
|
|
|
|
|
|
# Combine all necessary flags and optional flags.
|
|
# Add target processor to flags.
|
|
# You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
|
|
ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
|
ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
|
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
|
|
|
|
# Default target.
|
|
all:
|
|
@$(MAKE) begin
|
|
@$(MAKE) gccversion
|
|
@$(MAKE) sizebefore
|
|
@$(MAKE) clean_list # force clean each time
|
|
@$(MAKE) build
|
|
@$(MAKE) sizeafter
|
|
@$(MAKE) end
|
|
|
|
# Quick make that doesn't clean
|
|
quick:
|
|
@$(MAKE) begin
|
|
@$(MAKE) gccversion
|
|
@$(MAKE) sizebefore
|
|
@$(MAKE) build
|
|
@$(MAKE) sizeafter
|
|
@$(MAKE) end
|
|
|
|
# Change the build target to build a HEX file or a library.
|
|
build: elf hex
|
|
#build: elf hex eep lss sym
|
|
#build: lib
|
|
|
|
|
|
elf: $(BUILD_DIR)/$(TARGET).elf
|
|
hex: $(BUILD_DIR)/$(TARGET).hex
|
|
eep: $(BUILD_DIR)/$(TARGET).eep
|
|
lss: $(BUILD_DIR)/$(TARGET).lss
|
|
sym: $(BUILD_DIR)/$(TARGET).sym
|
|
LIBNAME=lib$(TARGET).a
|
|
lib: $(LIBNAME)
|
|
|
|
|
|
|
|
# Eye candy.
|
|
# AVR Studio 3.x does not check make's exit code but relies on
|
|
# the following magic strings to be generated by the compile job.
|
|
begin:
|
|
@$(SECHO) $(MSG_BEGIN)
|
|
|
|
end:
|
|
@$(SECHO) $(MSG_END)
|
|
|
|
|
|
# Display size of file.
|
|
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
|
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
|
|
ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf
|
|
|
|
sizebefore:
|
|
@if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
|
|
2>/dev/null; $(SECHO); fi
|
|
|
|
sizeafter:
|
|
@if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
|
|
2>/dev/null; $(SECHO); fi
|
|
# test file sizes eventually
|
|
# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
|
|
|
|
# Display compiler version information.
|
|
gccversion :
|
|
@$(SILENT) || $(CC) --version
|
|
|
|
|
|
|
|
# Program the device.
|
|
program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
|
|
$(PROGRAM_CMD)
|
|
|
|
teensy: $(BUILD_DIR)/$(TARGET).hex
|
|
$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
|
|
|
|
flip: $(BUILD_DIR)/$(TARGET).hex
|
|
batchisp -hardware usb -device $(MCU) -operation erase f
|
|
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
|
|
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
|
|
|
dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
|
|
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
|
|
dfu-programmer $(MCU) erase --force
|
|
else
|
|
dfu-programmer $(MCU) erase
|
|
endif
|
|
dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
|
|
dfu-programmer $(MCU) reset
|
|
|
|
dfu-start:
|
|
dfu-programmer $(MCU) reset
|
|
dfu-programmer $(MCU) start
|
|
|
|
flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
|
|
$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
|
|
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
|
|
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
|
|
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
|
$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
|
|
|
|
dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
|
|
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
|
|
dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
|
|
else
|
|
dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
|
|
endif
|
|
dfu-programmer $(MCU) reset
|
|
|
|
|
|
# Generate avr-gdb config/init file which does the following:
|
|
# define the reset signal, load the target file, connect to target, and set
|
|
# a breakpoint at main().
|
|
gdb-config:
|
|
@$(REMOVE) $(GDBINIT_FILE)
|
|
@echo define reset >> $(GDBINIT_FILE)
|
|
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
|
@echo end >> $(GDBINIT_FILE)
|
|
@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
|
|
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
|
ifeq ($(DEBUG_BACKEND),simulavr)
|
|
@echo load >> $(GDBINIT_FILE)
|
|
endif
|
|
@echo break main >> $(GDBINIT_FILE)
|
|
|
|
debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
|
|
ifeq ($(DEBUG_BACKEND), avarice)
|
|
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
|
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
|
$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
|
@$(WINSHELL) /c pause
|
|
|
|
else
|
|
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
|
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
|
endif
|
|
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
|
|
|
|
|
|
|
|
|
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
|
COFFCONVERT = $(OBJCOPY) --debugging
|
|
COFFCONVERT += --change-section-address .data-0x800000
|
|
COFFCONVERT += --change-section-address .bss-0x800000
|
|
COFFCONVERT += --change-section-address .noinit-0x800000
|
|
COFFCONVERT += --change-section-address .eeprom-0x810000
|
|
|
|
|
|
|
|
coff: $(BUILD_DIR)/$(TARGET).elf
|
|
@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
|
|
$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
|
|
|
|
|
|
extcoff: $(BUILD_DIR)/$(TARGET).elf
|
|
@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
|
|
$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
|
|
|
|
|
|
|
|
# Create final output files (.hex, .eep) from ELF output file.
|
|
%.hex: %.elf
|
|
@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
|
|
$(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
|
|
@$(BUILD_CMD)
|
|
@if $(AUTOGEN); then \
|
|
$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(KEYBOARD)_$(KEYMAP).hex\n"; \
|
|
$(COPY) $@ $(KEYMAP_PATH)/$(KEYBOARD)_$(KEYMAP).hex; \
|
|
else \
|
|
$(COPY) $@ $(TARGET).hex; \
|
|
fi
|
|
|
|
%.eep: %.elf
|
|
@$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
|
|
$(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
|
|
@$(BUILD_CMD)
|
|
|
|
# Create extended listing file from ELF output file.
|
|
%.lss: %.elf
|
|
@$(SILENT) || printf "$(MSG_EXTENDED_LISTING) $@" | $(AWK_CMD)
|
|
$(eval CMD=$(OBJDUMP) -h -S -z $< > $@)
|
|
@$(BUILD_CMD)
|
|
|
|
# Create a symbol table from ELF output file.
|
|
%.sym: %.elf
|
|
@$(SILENT) || printf "$(MSG_SYMBOL_TABLE) $@" | $(AWK_CMD)
|
|
$(eval CMD=$(NM) -n $< > $@ )
|
|
@$(BUILD_CMD)
|
|
|
|
# Create library from object files.
|
|
.SECONDARY : $(BUILD_DIR)/$(TARGET).a
|
|
.PRECIOUS : $(OBJ)
|
|
%.a: $(OBJ)
|
|
@$(SILENT) || printf "$(MSG_CREATING_LIBRARY) $@" | $(AWK_CMD)
|
|
$(eval CMD=$(AR) $@ $(OBJ) )
|
|
@$(BUILD_CMD)
|
|
|
|
# Link: create ELF output file from object files.
|
|
.SECONDARY : $(BUILD_DIR)/$(TARGET).elf
|
|
.PRECIOUS : $(OBJ)
|
|
%.elf: $(OBJ)
|
|
@$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
|
|
$(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
|
|
@$(BUILD_CMD)
|
|
|
|
# Compile: create object files from C source files.
|
|
$(OBJDIR)/%.o : %.c
|
|
@mkdir -p $(@D)
|
|
@$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
|
|
$(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
|
|
@$(BUILD_CMD)
|
|
|
|
# Compile: create object files from C++ source files.
|
|
$(OBJDIR)/%.o : %.cpp
|
|
@mkdir -p $(@D)
|
|
@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
|
|
$(eval CMD=$(CC) -c $(ALL_CPPFLAGS) $< -o $@)
|
|
@$(BUILD_CMD)
|
|
|
|
# Compile: create assembler files from C source files.
|
|
%.s : %.c
|
|
@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
|
|
$(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
|
|
@$(BUILD_CMD)
|
|
|
|
# Compile: create assembler files from C++ source files.
|
|
%.s : %.cpp
|
|
@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
|
|
$(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
|
|
@$(BUILD_CMD)
|
|
|
|
# Assemble: create object files from assembler source files.
|
|
$(OBJDIR)/%.o : %.S
|
|
@mkdir -p $(@D)
|
|
@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
|
|
$(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
|
|
@$(BUILD_CMD)
|
|
|
|
# Create preprocessed source for use in sending a bug report.
|
|
%.i : %.c
|
|
$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
|
|
|
|
# Target: clean project.
|
|
clean: begin clean_list end
|
|
|
|
clean_list :
|
|
@$(REMOVE) -r $(BUILD_DIR)
|
|
@$(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
|
|
@$(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
|
|
@if $$SUBPROJECT; then $(REMOVE) -r $(SUBPROJECT_PATH)/$(BUILD_DIR); fi
|
|
@$(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
|
|
|
|
show_path:
|
|
@echo VPATH=$(VPATH)
|
|
@echo SRC=$(SRC)
|
|
|
|
SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboards/*/.)))
|
|
all-keyboards-defaults-%:
|
|
@for x in $(SUBDIRS) ; do \
|
|
printf "Compiling with default: $$x" | $(AWK_CMD); \
|
|
LOG=$$($(MAKE) -C $$x $(subst all-keyboards-defaults-,,$@) VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
|
done
|
|
|
|
all-keyboards-defaults: all-keyboards-defaults-all
|
|
|
|
KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboards/%/=/keyboards/%)
|
|
all-keyboards-all: $(addsuffix -all,$(KEYBOARDS))
|
|
all-keyboards-quick: $(addsuffix -quick,$(KEYBOARDS))
|
|
all-keyboards-clean: $(addsuffix -clean,$(KEYBOARDS))
|
|
all-keyboards: all-keyboards-all
|
|
|
|
define make_keyboard
|
|
$(eval KEYBOARD=$(patsubst /keyboards/%,%,$1))
|
|
$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$1/keymaps/*/.))))
|
|
@for x in $(KEYMAPS) ; do \
|
|
printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-88s", $$0; }'; \
|
|
LOG=$$($(MAKE) -C $(TOP_DIR)$1 $2 keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
|
done
|
|
endef
|
|
|
|
define make_keyboard_helper
|
|
# Just remove the -quick, -all and so on from the first argument and pass it forward
|
|
$(call make_keyboard,$(subst -$2,,$1),$2)
|
|
endef
|
|
|
|
/keyboards/%-quick:
|
|
$(call make_keyboard_helper,$@,quick)
|
|
/keyboards/%-all:
|
|
$(call make_keyboard_helper,$@,all)
|
|
/keyboards/%-clean:
|
|
$(call make_keyboard_helper,$@,clean)
|
|
/keyboards/%:
|
|
$(call make_keyboard_helper,$@,all)
|
|
|
|
all-keymaps-%:
|
|
$(eval MAKECONFIG=$(call get_target,all-keymaps,$@))
|
|
$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
|
|
@for x in $(KEYMAPS) ; do \
|
|
printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-88s", $$0; }'; \
|
|
LOG=$$($(MAKE) $(subst all-keymaps-,,$@) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
|
done
|
|
|
|
all-keymaps: all-keymaps-all
|
|
|
|
# Create build directory
|
|
$(shell mkdir $(BUILD_DIR) 2>/dev/null)
|
|
|
|
# Create object files directory
|
|
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
|
|
|
|
|
# Include the dependency files.
|
|
-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
|
|
|
|
|
|
# Listing of phony targets.
|
|
.PHONY : all quick begin finish end sizebefore sizeafter gccversion \
|
|
build elf hex eep lss sym coff extcoff \
|
|
clean clean_list debug gdb-config show_path \
|
|
program teensy dfu flip dfu-ee flip-ee dfu-start \
|
|
all-keyboards-defaults all-keyboards all-keymaps \
|
|
all-keyboards-defaults-% all-keyboards-% all-keymaps-%
|