qmk_firmware/keyboards/zeal60/keymaps/tusing
Wilba6582 48a992f1c0 Zeal60/Zeal65/M60-A implementation (#3879)
* Initial version of zeal60

* WIP

* Fixes issue #900

* Adding RGB underglow functionality.
Fixed a compile-time conflict caused by enabling RGB underglow functionality.

* Refactor RPC protocol

* Fix last merge

* README for RGB underglow updated.

* Additional README changes.

* Adding RGBW strip software-based current-limiting functionality.

* RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead.

* Updated README to reflect implementation of built-in current limiting.

* Keymap readability improvements.

* Minor keymap improvements.

* Fixed LED driver init sequence, formatting

* Dimming implementation tested, working.

* Stab LEDs synced with spacebar hits in effects.

* RGB underglow tested and functional. Simplified README for RGB underglow.

* Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow.

* Improved arrow key positions in keymap.

* Added functionality to correct uneven RGB underglow. Refactored related code.

* Reverted to safer values for underglow.

* Changes for v0.3

* Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden.

* Create keymap.c

Added split backspace and split shift to ISO layout

* Create config.h

Turned on LEDs for new layout

* Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above.

* Added hhkb_wilba keymap

* Update keymap.c

* Update keymap.c

* Update keymap.c

* Added indicators, full param setting via host

* Added "mousekey" layout

* Added Zeal65 support, factory test mode

* Keycode safe range changed, caused bugs

* Bumped EEPROM version due to change in QMK keycodes

* Disable HHKB "blocked" LEDs if KC_NO in keymap

* Added "disable_hhkb_blocker_leds"

* Required overridden function for keymaps in EEPROM

* Added polar coordinate mapping, effect speed

* Force Raw HID interface number to 1 always

* Fixed last merge from master

* Added effect speed to default keymaps

* add BACKLIGHT_ prefix to vars

* add BACKLIGHT_ prefix to vars

* Keymap speed effect; keymap improvements/fixes
Readme updated to match changes

* Refactored to use common IS31FL3731/I2C drivers

* Fixed make rules, backlight disabled feature

* Make split rightshift default for Zeal65

* Added M60-A as a "version" of Zeal60.

* Renamed IS31FL3731 driver functions

* Fix suspend_wakeup_init_kb() being defined twice

* First pass refactor dynamic keymaps

* Updated to changed I2C and ISSI drivers

* Refactor zeal_color.* usage to quantum/color.*

* Updated Zeal65, fixed dynamic_keymap

* Major refactoring of Zeal60 backlight and API

* Lots of little cleanups

* Added readme.md

* Added readme.md

* Added LAYOUT_60*() macros, refactored and cleaned up default keymaps

* Fix compile error in suspend.c

* Added Zeal65 LAYOUT macros, info.json

* Added rama/m60_a, deleted zeal60/keymaps/m60_a

* Fixed rama/m60_a/keymaps/proto

* Fixed compilation error for suspend.c

* Requested changes for PR

* Fixed readme.md images

* Another readme.md fix

* Added drashna's requested changes
2018-09-13 14:37:13 -04:00
..
config.h Zeal60/Zeal65/M60-A implementation (#3879) 2018-09-13 14:37:13 -04:00
keymap.c Zeal60/Zeal65/M60-A implementation (#3879) 2018-09-13 14:37:13 -04:00
Makefile Zeal60/Zeal65/M60-A implementation (#3879) 2018-09-13 14:37:13 -04:00
README.md Zeal60/Zeal65/M60-A implementation (#3879) 2018-09-13 14:37:13 -04:00

RGB Underglow Strip on the Zeal60: A Guide

Requirements

  • WS2812B RGB strip, preferably 60 LEDs/meter
  • Wire, solder
  • Tape, hot glue, or some sort of adhesive

A. Connecting the strip

You might find the full PCB image helpful. Ignore the red boxes!

  1. Connect V+ to the receiving end of the thermistor labeled F1; connect GND to the board's GND pin. (Avoid connecting +V to the board's +5V pin - you will likely overload the thermistor, and you will limit your maximum brightness.)

  2. Connect DI to PB0.

  3. Should look something like this when finished:

Optional: To allow considerably more light to escape, consider angling the strip outwards by using some sort of fulcrum under the strip. (I used a thick wire.)

B. Enabling the strip

  1. If it is not present already, add the following to your keymap's Makefile:

    RGBLIGHT_ENABLE = yes
    AUDIO_ENABLE = no     #Underglow animations cannot be used with audio.
    
  2. If it is not present already, add the following to your keymap's config.h, and edit the values as necessary:

    // Set up RGB underglow.
    #define RGB_DI_PIN B0          // The pin your RGB strip is wired to
    #define RGBLIGHT_ANIMATIONS    // Require for fancier stuff (not compatible with audio)
    #define RGBLED_NUM 35          // Number of LEDs
    #define RGBLIGHT_HUE_STEP 5    // How much each press of rgb_hue changes hue
    #define RGBLIGHT_SAT_STEP 10   // How much each press of rgb_sat changes sat
    #define RGBLIGHT_VAL_STEP 10   // How much each press of rgb_val changes val
    
  3. If they are not present already, add the following keycodes to your keymap to control the RGB strip: RGB_TOG (on/off), RGB_MOD (step through modes), RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD (HSV increase/decrease). Add these to your keymap.

C. Dealing with current limits

USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide up to 900mA; USB 3.1 up to 1.5A; and powered USB hubs even more. We can run our keyboard at a higher brightness if we draw more power. The Zeal60 uses 500mA at max brightness. This means that you have about 400mA remaining for the strip to use on a USB 3.0 port; 1000mA free on a USB 3.1 port, so on and so forth.

Warning: This means you will need to turn off your RGB strip before connecting to a USB 2.0 port, as USB 2.0 cannot sustain the current necessary!

  1. If not present already, add the following to your keymap's config.h. Change the numbers based on your needs. The ones below are safe underestimates.

    // Enable current limiting for RGB underglow.
    #define RGBSTRIP_CURRENT_LIMIT 400    // Strip current limit in mA. (USB amperage - 500mA for keyboard)
    #define RGBSTRIP_MAX_CURRENT_PER_LIGHT 50 // mA per light when at max brightness.
    

    Example: I use a USB port capable of providing 1800 mA. The keyboard uses 500mA, so my personal value (in the tusing keymap) for RGBSTRIP_CURRENT_LIMIT is 1300. The particular WS2812B RGB strip I have uses a maximum of 60 mA per LED, so that is my personal value for RGBSTRIP_MAX_CURRENT_PER_LIGHT.

  2. Toggle on the LED strip (RGB_TOG) and step through animations (RGB_MOD) to test it out!

D. Sources and resources

A. Connecting the strip.

B. Enabling the strip.

C. Dealing with current limits.