27b0f8923e
Specifically, to fix some edge cases, and keep the handling consistent, the userspace folder should not actually be added at the end. Ideally, it should be added after the keymap paths, but before the keyboard's path. This issue was discovered in #5484, and the fix created by mtei.
398 lines
13 KiB
Makefile
398 lines
13 KiB
Makefile
# Determine what keyboard we are building and setup the build environment.
|
|
#
|
|
# We support folders up to 5 levels deep below `keyboards/`. This file is
|
|
# responsible for determining which folder is being used and doing the
|
|
# corresponding environment setup.
|
|
|
|
ifndef VERBOSE
|
|
.SILENT:
|
|
endif
|
|
|
|
.DEFAULT_GOAL := all
|
|
|
|
include common.mk
|
|
|
|
# Set the filename for the final firmware binary
|
|
KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
|
|
TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
|
|
KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
|
|
STM32_PATH := quantum/stm32
|
|
|
|
# Force expansion
|
|
TARGET := $(TARGET)
|
|
|
|
# For split boards we need to set a master half.
|
|
MASTER ?= left
|
|
ifdef master
|
|
MASTER = $(master)
|
|
endif
|
|
|
|
ifeq ($(MASTER),right)
|
|
OPT_DEFS += -DMASTER_IS_ON_RIGHT
|
|
else
|
|
ifneq ($(MASTER),left)
|
|
$(error MASTER does not have a valid value(left/right))
|
|
endif
|
|
endif
|
|
|
|
ifdef SKIP_VERSION
|
|
OPT_DEFS += -DSKIP_VERSION
|
|
endif
|
|
|
|
# Determine which subfolders exist.
|
|
KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
|
|
KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
|
|
KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
|
|
KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
|
|
KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
|
|
KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
|
|
KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
|
|
KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
|
|
KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
|
|
KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
|
|
KEYBOARD_PATHS :=
|
|
KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1)
|
|
KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2)
|
|
KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3)
|
|
KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4)
|
|
KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5)
|
|
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
|
|
KEYBOARD_PATHS += $(KEYBOARD_PATH_5)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
|
|
KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
|
|
KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
|
|
KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
|
|
KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
|
|
endif
|
|
|
|
|
|
# Pull in rules.mk files from all our subfolders
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
|
|
include $(KEYBOARD_PATH_5)/rules.mk
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","")
|
|
include $(KEYBOARD_PATH_4)/rules.mk
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","")
|
|
include $(KEYBOARD_PATH_3)/rules.mk
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","")
|
|
include $(KEYBOARD_PATH_2)/rules.mk
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
|
|
include $(KEYBOARD_PATH_1)/rules.mk
|
|
endif
|
|
|
|
|
|
MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
|
|
MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
|
|
MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
|
|
MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
|
|
MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
|
|
|
|
ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
|
|
-include $(MAIN_KEYMAP_PATH_5)/rules.mk
|
|
KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
|
|
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
|
|
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
|
|
-include $(MAIN_KEYMAP_PATH_4)/rules.mk
|
|
KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
|
|
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
|
|
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
|
|
-include $(MAIN_KEYMAP_PATH_3)/rules.mk
|
|
KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
|
|
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
|
|
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
|
|
-include $(MAIN_KEYMAP_PATH_2)/rules.mk
|
|
KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
|
|
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
|
|
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
|
|
-include $(MAIN_KEYMAP_PATH_1)/rules.mk
|
|
KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
|
|
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
|
|
else ifneq ($(LAYOUTS),)
|
|
include build_layout.mk
|
|
else
|
|
$(error Could not find keymap)
|
|
# this state should never be reached
|
|
endif
|
|
|
|
ifeq ($(strip $(CTPC)), yes)
|
|
CONVERT_TO_PROTON_C=yes
|
|
endif
|
|
|
|
ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
|
|
TARGET := $(TARGET)_proton_c
|
|
include $(STM32_PATH)/proton_c.mk
|
|
OPT_DEFS += -DCONVERT_TO_PROTON_C
|
|
endif
|
|
|
|
ifneq ($(FORCE_LAYOUT),)
|
|
TARGET := $(TARGET)_$(FORCE_LAYOUT)
|
|
endif
|
|
|
|
include quantum/mcu_selection.mk
|
|
|
|
ifdef MCU_FAMILY
|
|
OPT_DEFS += -DQMK_STM32
|
|
KEYBOARD_PATHS += $(STM32_PATH)
|
|
endif
|
|
|
|
|
|
# Find all the C source files to be compiled in subfolders.
|
|
KEYBOARD_SRC :=
|
|
|
|
KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c
|
|
KEYBOARD_C_2 := $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).c
|
|
KEYBOARD_C_3 := $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).c
|
|
KEYBOARD_C_4 := $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).c
|
|
KEYBOARD_C_5 := $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).c
|
|
|
|
ifneq ("$(wildcard $(KEYBOARD_C_5))","")
|
|
KEYBOARD_SRC += $(KEYBOARD_C_5)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_C_4))","")
|
|
KEYBOARD_SRC += $(KEYBOARD_C_4)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_C_3))","")
|
|
KEYBOARD_SRC += $(KEYBOARD_C_3)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_C_2))","")
|
|
KEYBOARD_SRC += $(KEYBOARD_C_2)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_C_1))","")
|
|
KEYBOARD_SRC += $(KEYBOARD_C_1)
|
|
endif
|
|
|
|
# Generate KEYBOARD_name_subname for all levels of the keyboard folder
|
|
KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1)))
|
|
KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2)))
|
|
KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3)))
|
|
KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4)))
|
|
KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5)))
|
|
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
|
|
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
|
|
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
|
|
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
|
|
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2)
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
|
|
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1)
|
|
endif
|
|
|
|
# Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
|
|
# that the same keymap may be used on multiple keyboards.
|
|
#
|
|
# We grab the most top-level include file that we can. That file should
|
|
# use #ifdef statements to include all the neccesary subfolder includes,
|
|
# as described here:
|
|
#
|
|
# https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
|
|
#
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
|
|
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).h)","")
|
|
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).h)","")
|
|
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).h)","")
|
|
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","")
|
|
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
|
|
endif
|
|
|
|
# Determine and set parameters based on the keyboard's processor family.
|
|
# We can assume a ChibiOS target When MCU_FAMILY is defined since it's
|
|
# not used for LUFA
|
|
ifdef MCU_FAMILY
|
|
FIRMWARE_FORMAT?=bin
|
|
PLATFORM=CHIBIOS
|
|
else ifdef ARM_ATSAM
|
|
PLATFORM=ARM_ATSAM
|
|
FIRMWARE_FORMAT=bin
|
|
else
|
|
PLATFORM=AVR
|
|
FIRMWARE_FORMAT?=hex
|
|
endif
|
|
|
|
ifeq ($(PLATFORM),CHIBIOS)
|
|
include $(TMK_PATH)/chibios.mk
|
|
OPT_OS = chibios
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_4)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_3)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_2)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
|
|
else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","")
|
|
OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h
|
|
endif
|
|
endif
|
|
|
|
# Find all of the config.h files and add them to our CONFIG_H define.
|
|
CONFIG_H :=
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
|
|
CONFIG_H += $(KEYBOARD_PATH_5)/config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/config.h)","")
|
|
CONFIG_H += $(KEYBOARD_PATH_4)/config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/config.h)","")
|
|
CONFIG_H += $(KEYBOARD_PATH_3)/config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/config.h)","")
|
|
CONFIG_H += $(KEYBOARD_PATH_2)/config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","")
|
|
CONFIG_H += $(KEYBOARD_PATH_1)/config.h
|
|
endif
|
|
|
|
POST_CONFIG_H :=
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","")
|
|
POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","")
|
|
POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","")
|
|
POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","")
|
|
POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h
|
|
endif
|
|
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
|
|
POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
|
|
endif
|
|
|
|
# Save the defines and includes here, so we don't include any keymap specific ones
|
|
PROJECT_DEFS := $(OPT_DEFS)
|
|
PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
|
|
PROJECT_CONFIG := $(CONFIG_H)
|
|
|
|
# Userspace setup and definitions
|
|
ifeq ("$(USER_NAME)","")
|
|
USER_NAME := $(KEYMAP)
|
|
endif
|
|
USER_PATH := users/$(USER_NAME)
|
|
|
|
-include $(USER_PATH)/rules.mk
|
|
ifneq ("$(wildcard $(USER_PATH)/config.h)","")
|
|
CONFIG_H += $(USER_PATH)/config.h
|
|
endif
|
|
|
|
|
|
# Object files directory
|
|
# To put object files in current directory, use a dot (.), do NOT make
|
|
# this an empty or blank macro!
|
|
KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
|
|
|
|
ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
|
|
CONFIG_H += $(KEYMAP_PATH)/config.h
|
|
endif
|
|
|
|
# # project specific files
|
|
SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
|
|
SRC += $(KEYBOARD_SRC) \
|
|
$(KEYMAP_C) \
|
|
$(QUANTUM_SRC)
|
|
|
|
# Optimize size but this may cause error "relocation truncated to fit"
|
|
#EXTRALDFLAGS = -Wl,--relax
|
|
|
|
# Search Path
|
|
VPATH += $(KEYMAP_PATH)
|
|
VPATH += $(USER_PATH)
|
|
VPATH += $(KEYBOARD_PATHS)
|
|
VPATH += $(COMMON_VPATH)
|
|
|
|
include common_features.mk
|
|
include $(TMK_PATH)/protocol.mk
|
|
include $(TMK_PATH)/common.mk
|
|
include bootloader.mk
|
|
|
|
SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
|
|
SRC += $(TMK_COMMON_SRC)
|
|
OPT_DEFS += $(TMK_COMMON_DEFS)
|
|
EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
|
|
|
|
ifeq ($(PLATFORM),AVR)
|
|
ifeq ($(strip $(PROTOCOL)), VUSB)
|
|
include $(TMK_PATH)/protocol/vusb.mk
|
|
else
|
|
include $(TMK_PATH)/protocol/lufa.mk
|
|
endif
|
|
include $(TMK_PATH)/avr.mk
|
|
endif
|
|
|
|
ifeq ($(PLATFORM),ARM_ATSAM)
|
|
include $(TMK_PATH)/arm_atsam.mk
|
|
include $(TMK_PATH)/protocol/arm_atsam.mk
|
|
endif
|
|
|
|
ifeq ($(PLATFORM),CHIBIOS)
|
|
include $(TMK_PATH)/protocol/chibios.mk
|
|
endif
|
|
|
|
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
|
|
VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
|
|
VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer
|
|
include $(VISUALIZER_PATH)/visualizer.mk
|
|
endif
|
|
|
|
CONFIG_H += $(POST_CONFIG_H)
|
|
ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
|
|
|
|
OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
|
|
$(KEYMAP_OUTPUT)_SRC := $(SRC)
|
|
$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \
|
|
-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH_1)/config.h\" \
|
|
-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
|
|
-DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H
|
|
$(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS)
|
|
$(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
|
|
$(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC)
|
|
$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) $(GFXDEFS)
|
|
$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
|
|
$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
|
|
|
|
# Default target.
|
|
all: build check-size
|
|
build: elf cpfirmware
|
|
check-size: build
|
|
|
|
include show_options.mk
|
|
include $(TMK_PATH)/rules.mk
|