Add edvorakjp kepmap for crkbd (#4537)

* edvorakjp layout for crkbd

* bugfix of edvorakjp

QMK cannot send keycode that doesn't exists on new layer.
This commit is contained in:
epaew 2018-12-04 01:00:00 +09:00 committed by MechMerlin
parent 5d47231f2a
commit fe982caf5d
7 changed files with 354 additions and 5 deletions

View File

@ -0,0 +1,24 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
#define SWAP_SCLN
// #define TAPPING_FORCE_HOLD
#define TAPPING_TERM 120
#undef RGBLED_NUM
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLED_NUM 27
#define RGBLIGHT_LIMIT_VAL 100
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#endif // CONFIG_USER_H

View File

@ -0,0 +1,158 @@
#include QMK_KEYBOARD_H
#ifdef PROTOCOL_LUFA
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "oled.h"
#endif
#include "edvorakjp.h"
/*
* enum custom_keycodes {
* KC_LOCK = NEW_SAFE_RANGE,
* };
*/
#define KC_ KC_TRNS
#define KC_TMB1 LGUI_T(KC_TAB)
#define KC_TMB2 LSFT_T(KC_SPC)
#define KC_TMB3 TD(TD_LOWER) // act as LOWER when hold, as KC_LANG2(=English) when tapped
#define KC_TMB4 TD(TD_RAISE) // act as RAISE when hold, as KC_LANG1(=Japanese) when tapped
#define KC_TMB5 RCTL_T(KC_BSPC)
#define KC_TMB6 RALT_T(KC_ENT)
#define KC_TMB7 KC_DEL
#define KC_TMB8 RALT(KC_ENT)
#define KC_TMB9 LGUI(KC_TAB)
#define KC_RST RESET
#define KC_DBUG DEBUG
#define KC_RTOG RGB_TOG
#define KC_EDJP EDVORAK
#define KC_QWER QWERTY
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_EDVORAK] = LAYOUT_kc(
//|----+----+----+----+----+----| |----+----+----+----+----+----|
ESC ,QUOT,COMM,DOT , Y , P , F , G , R , W , Q ,BSLS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
EQL , A , O , E , I , U , D , T , N , S , M ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
GRV ,SCLN, X , C , V , Z , B , H , J , K , L ,SLSH,
//`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
TMB1,TMB2,TMB3, TMB4,TMB5,TMB6
// `----+----+----' `----+----+----'
),
[_EDVORAKJ1] = LAYOUT_kc(
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, AI , OU , EI , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , Y , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,ANN ,ONN ,ENN ,INN ,UNN , , , , , , ,
//`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
, , , , ,
// `----+----+----' `----+----+----'
),
[_EDVORAKJ2] = LAYOUT_kc(
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, AI , OU , EI , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , Y , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,ANN ,ONN ,ENN ,INN ,UNN , , , , , , ,
//`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
, , , , ,
// `----+----+----' `----+----+----'
),
[_QWERTY] = LAYOUT_kc(
//|----+----+----+----+----+----| |----+----+----+----+----+----|
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
EQL , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
GRV , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,BSLS,
//`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
, , , , ,
// `----+----+----' `----+----+----'
),
[_LOWER] = LAYOUT_kc(
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, 1 ,EXLM, AT ,HASH,DLR , PERC,CIRC,AMPR,ASTR, 0 , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , LT ,LCBR,LPRN,LBRC, RBRC,RPRN,RCBR, GT , , ,
//`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
, , , ,TMB7,TMB8
// `----+----+----' `----+----+----'
),
[_RAISE] = LAYOUT_kc(
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,F11 ,F12 ,PSCR,SLCK,PAUS, ,HOME,PGDN,PGUP,END , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , ,LEFT,DOWN, UP ,RGHT, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
TMB9, , , , ,
// `----+----+----' `----+----+----'
),
[_ADJUST] = LAYOUT_kc(
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , ,EXTOFF, , ,EXTON, , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , ,QWER,WIN ,RST , RTOG,MAC ,EDJP, , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
, , , , ,
// `----+----+----' `----+----+----'
)
};
#ifdef SSD1306OLED
void matrix_init_keymap(void) {
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
iota_gfx_init(!has_usb()); // turns on the display
}
void matrix_scan_user(void) {
iota_gfx_task(); // this is what updates the display continuously
}
#endif
#ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT
uint32_t layer_state_set_keymap(uint32_t state) {
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
switch (biton32(state)) {
case _EDVORAKJ1:
case _EDVORAKJ2:
// _EDVORAKJ1 & J2 are same colored
rgblight_sethsv_noeeprom_white();
break;
case _LOWER:
rgblight_sethsv_noeeprom_red();
break;
case _RAISE:
rgblight_sethsv_noeeprom_blue();
break;
case _ADJUST:
rgblight_sethsv_noeeprom_green();
break;
default: // for any other layers, or the default layer
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_GRADIENT + 3);
rgblight_sethsv_noeeprom_red();
break;
}
return state;
}
#endif

View File

@ -0,0 +1,82 @@
#include <string.h>
#include "oled.h"
// NOTE: Redefined to avoid to use snprintf(); It makes size of firmware big.
const char *read_mode_icon(bool windows_mode) {
static const char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}};
static char mode_icon[10];
int mode_number = windows_mode ? 1 : 0;
strcpy(mode_icon, logo[mode_number][0]);
strcat(mode_icon, "\n");
strcat(mode_icon, logo[mode_number][1]);
return mode_icon;
}
const char *read_layer_state(void) {
static char layer_state_str[24];
char layer_name[17];
switch (biton32(layer_state)) {
case L_BASE:
strcpy(layer_name, default_layer_state == 1UL<<_EDVORAK ? "EDVORAK" : "QWERTY");
break;
case _EDVORAKJ1:
case _EDVORAKJ2:
strcpy(layer_name, "JP_EXT");
break;
case _RAISE:
strcpy(layer_name, "Raise");
break;
case _LOWER:
strcpy(layer_name, "Lower");
break;
case _ADJUST:
strcpy(layer_name, "Adjust");
break;
default:
snprintf(layer_name, sizeof(layer_name), "Undef-%ld", layer_state);
}
strcpy(layer_state_str, "Layer: ");
strcat(layer_state_str, layer_name);
strcat(layer_state_str, "\n");
return layer_state_str;
}
const char *read_host_led_state(void) {
static char led_str[24];
bool ext_status = get_enable_jp_extra_layer() && get_japanese_mode();
strcpy(led_str, ext_status ? "EXT" : " ");
strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? " NMLK" : " ");
strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? " CAPS" : " ");
strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? " SCLK" : " ");
return led_str;
}
void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
if (is_master) {
matrix_write(&matrix, read_mode_icon(!get_enable_kc_lang()));
matrix_write(&matrix, " ");
matrix_write(&matrix, read_layer_state());
matrix_write(&matrix, read_host_led_state());
} else {
matrix_write(&matrix, read_logo());
}
matrix_update(&display, &matrix);
}

View File

@ -0,0 +1,24 @@
#ifndef OLED_USER_H
#define OLED_USER_H
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#include "ssd1306.h"
#include "edvorakjp.h"
//assign the right code to your layers for OLED display
#define L_BASE 0
extern uint8_t is_master;
extern bool japanese_mode;
// method prototypes defined in crkbd/lib
extern const char *read_logo(void);
const char *read_mode_icon(bool swap);
const char *read_layer_state(void);
const char *read_host_led_state(void);
void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source);
void iota_gfx_task_user(void);
#endif // OLED_CONFIG_USER_H

View File

@ -0,0 +1,21 @@
# edvorakjp
Epaew's Enhanced Dvorak layout for Japanese Programmer
see [here](/users/edvorakjp) for more informations.
## License
Copyright 2018 Ryo Maeda epaew.333@gmail.com @epaew
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.

View File

@ -0,0 +1,32 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
TAP_DANCE_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
./lib/logo_reader.c \
oled.c \
# ./lib/rgb_state_reader.c \
# ./lib/layer_state_reader.c \
# ./lib/keylogger.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \

View File

@ -37,11 +37,7 @@ bool process_record_edvorakjp_ext(uint16_t keycode, keyrecord_t *record) {
} }
return true; return true;
// left hand and right hand's right side // left hand up and right hand's right side
case KC_X:
case KC_C:
case KC_V:
case KC_Z:
case KC_Y: case KC_Y:
case KC_P: case KC_P:
case KC_W: case KC_W:
@ -54,6 +50,18 @@ bool process_record_edvorakjp_ext(uint16_t keycode, keyrecord_t *record) {
layer_on(_EDVORAKJ2); layer_on(_EDVORAKJ2);
} }
return true; return true;
// left hand down
// If return true, QMK sends keycode in new layer,
// but these keys are only available in old layer.
case KC_X:
case KC_C:
case KC_V:
case KC_Z:
if (record->event.pressed) {
layer_on(_EDVORAKJ2);
tap_code(keycode);
}
return false;
} }
// vowel keys, symbol keys and modifier keys // vowel keys, symbol keys and modifier keys