Added Contra keyboard support (#2501)
* Added Contra keyboard support The configuration came from a source distribution of the firmware on the Contra's official website. I have also included a simple MIDI keymap. (And it works!) * Changes to Contra config and README * Readme has been changed as requested by jackhumbert * Config has been changed to add the Cartel and Contra names to the USB configuration.
This commit is contained in:
adiron
Jack Humbert
parent
141a52982e
commit
fdeb7f7665
58
keyboards/contra/config.h
Executable file
58
keyboards/contra/config.h
Executable file
@ -0,0 +1,58 @@
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Cartel
|
||||
#define PRODUCT Contra
|
||||
#define DESCRIPTION Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { F6, B3, B2, B6 }
|
||||
#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
#ifdef BACKLIGHT_PIN
|
||||
#define BACKLIGHT_LEVELS 0
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 0
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
|
||||
#endif
|
||||
1
keyboards/contra/contra.c
Executable file
1
keyboards/contra/contra.c
Executable file
@ -0,0 +1 @@
|
||||
#include "contra.h"
|
||||
18
keyboards/contra/contra.h
Executable file
18
keyboards/contra/contra.h
Executable file
@ -0,0 +1,18 @@
|
||||
#ifndef KB_H
|
||||
#define KB_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
30
keyboards/contra/keymaps/dana/config.h
Normal file
30
keyboards/contra/keymaps/dana/config.h
Normal file
@ -0,0 +1,30 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
|
||||
#undef TAPPING_TERM
|
||||
#define TAPPING_TERM 190
|
||||
|
||||
#define MUSIC_MASK (keycode != KC_NO)
|
||||
#define MIDI_ADVANCED
|
||||
|
||||
#endif
|
||||
37
keyboards/contra/keymaps/dana/keymap.c
Normal file
37
keyboards/contra/keymaps/dana/keymap.c
Normal file
@ -0,0 +1,37 @@
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "contra.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ` | Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Tab | A | S | D | F | G | H | J | K | L | ; | " |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| Z | X | C | V | B | N | M | , | . | / |Shift |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | Cmd |Lower | Space |Raise | Enter| Cmd | Alt |Ctrl |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[0] = {
|
||||
{ MI_C_4, MI_Cs_4, MI_D_4, MI_Ds_4, MI_E_4, MI_F_4, MI_Fs_4, MI_G_4, MI_Gs_4, MI_A_4, MI_As_4, MI_B_4 },
|
||||
{ MI_C_3, MI_Cs_3, MI_D_3, MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, MI_Gs_3, MI_A_3, MI_As_3, MI_B_3 },
|
||||
{ MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2, MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, MI_A_2, MI_As_2, MI_B_2 },
|
||||
{ MI_C_1, MI_Cs_1, MI_D_1, MI_Ds_1, MI_E_1, MI_F_1, MI_Fs_1, MI_G_1, MI_Gs_1, MI_A_1, MI_As_1, MI_B_1 }
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
|
||||
|
||||
6
keyboards/contra/keymaps/dana/readme.md
Normal file
6
keyboards/contra/keymaps/dana/readme.md
Normal file
@ -0,0 +1,6 @@
|
||||
# Dana musical MIDI keyboard layout
|
||||
|
||||
Has the contra mapped as a MIDI keyboard, where each row is an octave.
|
||||
|
||||
The keyboard has only MIDI, nothing else!
|
||||
|
||||
25
keyboards/contra/keymaps/dana/rules.mk
Normal file
25
keyboards/contra/keymaps/dana/rules.mk
Normal file
@ -0,0 +1,25 @@
|
||||
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = yes # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
16
keyboards/contra/readme.md
Normal file
16
keyboards/contra/readme.md
Normal file
@ -0,0 +1,16 @@
|
||||
CONTRA
|
||||
===
|
||||
|
||||
|
||||
|
||||
A 40% keyboard by
|
||||
|
||||
Keyboard Maintainer: The QMK Community
|
||||
Hardware Supported: CONTRA
|
||||
Hardware Availability: [CARTEL](https://cartel.ltd/projects/contra/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make contra:dana
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
58
keyboards/contra/rules.mk
Executable file
58
keyboards/contra/rules.mk
Executable file
@ -0,0 +1,58 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
Loading…
Reference in New Issue
Block a user