kinesis remap
This commit is contained in:
milestogo
parent
176b93d08e
commit
f74ff86f9c
@ -1,3 +1,5 @@
|
||||
SUBPROJECT_DEFAULT = alvicstep
|
||||
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
endif
|
||||
|
||||
3
keyboards/kinesis/alvicstep/Makefile
Normal file
3
keyboards/kinesis/alvicstep/Makefile
Normal file
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
105
keyboards/kinesis/alvicstep/alvicstep.c
Normal file
105
keyboards/kinesis/alvicstep/alvicstep.c
Normal file
@ -0,0 +1,105 @@
|
||||
#include "kinesis.h"
|
||||
|
||||
// begin section origin https://github.com/alvicstep/tmk_keyboard
|
||||
|
||||
void all_led_off(void)
|
||||
{
|
||||
PORTD = 0b11111111;
|
||||
}
|
||||
|
||||
void all_led_on(void)
|
||||
{
|
||||
PORTD = 0b00000000;
|
||||
}
|
||||
void num_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b11101111;
|
||||
}
|
||||
|
||||
void caps_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b01111111;
|
||||
}
|
||||
|
||||
void scroll_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b11011111;
|
||||
}
|
||||
void keypad_led_on(void)
|
||||
{
|
||||
PORTD = 0b10111111;
|
||||
}
|
||||
void blink_all_leds(void)
|
||||
{
|
||||
all_led_on();
|
||||
_delay_ms(500);
|
||||
|
||||
all_led_off();
|
||||
_delay_ms(100);
|
||||
|
||||
caps_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
num_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
scroll_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
keypad_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
//back
|
||||
|
||||
scroll_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
num_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
caps_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
all_led_off();
|
||||
}
|
||||
|
||||
// End section origin https://github.com/alvicstep/tmk_keyboard
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
blink_all_leds();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
//Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
|
||||
uint8_t leds = 0xF0;
|
||||
if (usb_led & 1 << USB_LED_NUM_LOCK)
|
||||
leds &= ~0x10;
|
||||
if (usb_led & 1 << USB_LED_CAPS_LOCK)
|
||||
leds &= ~0x80;
|
||||
if (usb_led & 1 << USB_LED_SCROLL_LOCK)
|
||||
leds &= ~0x20;
|
||||
PORTD = (PORTD & 0x0F) | leds;
|
||||
|
||||
led_set_user(usb_led);
|
||||
|
||||
}
|
||||
|
||||
|
||||
67
keyboards/kinesis/alvicstep/alvicstep.h
Normal file
67
keyboards/kinesis/alvicstep/alvicstep.h
Normal file
@ -0,0 +1,67 @@
|
||||
#ifndef KINESIS_ALVICSTEP_H
|
||||
#define KINESIS_ALVICSTEP_H
|
||||
|
||||
#include "../kinesis.h"
|
||||
|
||||
|
||||
#define KEYMAP( \
|
||||
k02,k22,k12,k01,k21,k11,k00,k20,k10, \
|
||||
k80,k70,k60,k50,k40,k30, \
|
||||
k81,k71,k61,k51,k41,k31, \
|
||||
k82,k72,k62,k52,k42,k32, \
|
||||
k83,k73,k63,k53,k43,k33, \
|
||||
k74,k64,k54,k34, \
|
||||
k36,k35, \
|
||||
k55, \
|
||||
k56,k46,k75, \
|
||||
k03,k23,k13,k04,k24,k14,k05,k85,k84, \
|
||||
k94,kA4,kB4,kD4,kE4,kF4, \
|
||||
k95,kA5,kB5,kD5,kE5,kF5, \
|
||||
k96,kA6,kB6,kD6,kE6,kF6, \
|
||||
k97,kA7,kB7,kD7,kE7,kF7, \
|
||||
k93,kB3,kD3,kE3, \
|
||||
k47,k66, \
|
||||
k67, \
|
||||
k87,k76,k86 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
|
||||
{ k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, KC_NO }, \
|
||||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56, KC_NO }, \
|
||||
{ k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, KC_NO }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \
|
||||
}
|
||||
|
||||
|
||||
/* Row pin configuration
|
||||
PF0 A
|
||||
PF1 B
|
||||
PF2 C
|
||||
PF3 G 0 = U4, 1 = U5
|
||||
|
||||
|
||||
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 rA rB rC rD rE rF
|
||||
PB0 c0| f6 f8 f7 5 4 3 2 1 =+
|
||||
PB1 c1| f3 f5 f4 t r e w q TAB
|
||||
PB2 c2| ESC f2 f1 g f d s a CL
|
||||
PB3 c3| f9 f11 f10 b v c x z LS UP DN [{ ]}
|
||||
PB4 c4| f12 SL PS RT LT §± `~ 6 7 8 9 0 -_
|
||||
PB5 c5| PB PGM KPD y u i o p \
|
||||
PB6 c6| LC DL BS RC EN SP h j k l ;: '"
|
||||
PB7 c7| RA PU PD n m ,< .> /? RS
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
35
keyboards/kinesis/alvicstep/config.h
Normal file
35
keyboards/kinesis/alvicstep/config.h
Normal file
@ -0,0 +1,35 @@
|
||||
#ifndef ALVICSTEP_CONFIG_H
|
||||
#define ALVICSTEP_CONFIG_H
|
||||
|
||||
#include "../config.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 16
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
//Passed through the port multipler, so 4 pins =16
|
||||
#define MATRIX_ROW_PINS { F0,F1, F2, F3 }
|
||||
|
||||
// May be upside down.
|
||||
#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
|
||||
#endif
|
||||
|
Before Width: | Height: | Size: 174 KiB After Width: | Height: | Size: 174 KiB |
|
Before Width: | Height: | Size: 336 KiB After Width: | Height: | Size: 336 KiB |
|
Before Width: | Height: | Size: 260 KiB After Width: | Height: | Size: 260 KiB |
|
Before Width: | Height: | Size: 171 KiB After Width: | Height: | Size: 171 KiB |
232
keyboards/kinesis/alvicstep/docs/kicad/kinesis-cache.lib
Normal file
232
keyboards/kinesis/alvicstep/docs/kicad/kinesis-cache.lib
Normal file
@ -0,0 +1,232 @@
|
||||
EESchema-LIBRARY Version 2.3 Date: Wednesday, November 12, 2014 'pmt' 10:15:19 pm
|
||||
#encoding utf-8
|
||||
#
|
||||
# AT90S4414-P
|
||||
#
|
||||
DEF AT90S4414-P IC 0 40 Y Y 1 F N
|
||||
F0 "IC" -850 1880 40 H V L BNN
|
||||
F1 "AT90S4414-P" 450 -1950 40 H V L BNN
|
||||
F2 "DIL40" 0 0 30 H V C CIN
|
||||
F3 "~" 0 0 60 H V C CNN
|
||||
ALIAS AT90S8515-P
|
||||
$FPLIST
|
||||
40DIP-ELL600
|
||||
40dip600
|
||||
$ENDFPLIST
|
||||
DRAW
|
||||
S -850 1850 850 -1850 0 1 10 f
|
||||
X (T0)PB0 1 1000 700 150 L 40 40 1 1 B
|
||||
X (T1)PB1 2 1000 600 150 L 40 40 1 1 B
|
||||
X (AIN0)PB2 3 1000 500 150 L 40 40 1 1 B
|
||||
X (AIN1)PB3 4 1000 400 150 L 40 40 1 1 B
|
||||
X (~SS~)PB4 5 1000 300 150 L 40 40 1 1 B
|
||||
X (MOSI)PB5 6 1000 200 150 L 40 40 1 1 B
|
||||
X (MISO)PB6 7 1000 100 150 L 40 40 1 1 B
|
||||
X (SCK)PB7 8 1000 0 150 L 40 40 1 1 B
|
||||
X ~RESET 9 -1000 1700 150 R 40 40 1 1 I
|
||||
X (RXD)PD0 10 1000 -1000 150 L 40 40 1 1 B
|
||||
X GND 20 0 -2000 150 U 40 40 1 1 W
|
||||
X ALE 30 1000 850 150 L 40 40 1 1 O
|
||||
X VCC 40 0 2000 150 D 40 40 1 1 W
|
||||
X (TXD)PD1 11 1000 -1100 150 L 40 40 1 1 B
|
||||
X (A8)PC0 21 1000 -150 150 L 40 40 1 1 B
|
||||
X ICP 31 -1000 -1400 150 R 40 40 1 1 I
|
||||
X (INT0)PD2 12 1000 -1200 150 L 40 40 1 1 B
|
||||
X (A9)PC1 22 1000 -250 150 L 40 40 1 1 B
|
||||
X (AD7)PA7 32 1000 1000 150 L 40 40 1 1 B
|
||||
X (INT1)PD3 13 1000 -1300 150 L 40 40 1 1 B
|
||||
X (A10)PC2 23 1000 -350 150 L 40 40 1 1 B
|
||||
X (AD6)PA6 33 1000 1100 150 L 40 40 1 1 B
|
||||
X PD4 14 1000 -1400 150 L 40 40 1 1 B
|
||||
X (A11)PC3 24 1000 -450 150 L 40 40 1 1 B
|
||||
X (AD5)PA5 34 1000 1200 150 L 40 40 1 1 B
|
||||
X (OC1A)PD5 15 1000 -1500 150 L 40 40 1 1 B
|
||||
X (A12)PC4 25 1000 -550 150 L 40 40 1 1 B
|
||||
X (AD4)PA4 35 1000 1300 150 L 40 40 1 1 B
|
||||
X (~WR~)PD6 16 1000 -1600 150 L 40 40 1 1 B
|
||||
X (A13)PC5 26 1000 -650 150 L 40 40 1 1 B
|
||||
X (AD3)PA3 36 1000 1400 150 L 40 40 1 1 B
|
||||
X (~RD~)PD7 17 1000 -1700 150 L 40 40 1 1 B
|
||||
X (A14)PC6 27 1000 -750 150 L 40 40 1 1 B
|
||||
X (AD2)PA2 37 1000 1500 150 L 40 40 1 1 B
|
||||
X XTAL2 18 -1000 1200 150 R 40 40 1 1 B
|
||||
X (A15)PC7 28 1000 -850 150 L 40 40 1 1 B
|
||||
X (AD1)PA1 38 1000 1600 150 L 40 40 1 1 B
|
||||
X XTAL1 19 -1000 800 150 R 40 40 1 1 B
|
||||
X OC1B 29 -1000 -1500 150 R 40 40 1 1 W
|
||||
X (AD0)PA0 39 1000 1700 150 L 40 40 1 1 B
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
# ATMEGA16U4-A
|
||||
#
|
||||
DEF ATMEGA16U4-A U 0 40 Y Y 1 F N
|
||||
F0 "U" -950 1700 40 H V C CNN
|
||||
F1 "ATMEGA16U4-A" 700 -1500 40 H V C CNN
|
||||
F2 "TQFP44" 0 0 35 H V C CIN
|
||||
F3 "~" 1100 1100 60 H V C CNN
|
||||
ALIAS ATMEGA16U4RC-A ATMEGA32U4-A ATMEGA32U4RC-A
|
||||
$FPLIST
|
||||
TQFP44
|
||||
$ENDFPLIST
|
||||
DRAW
|
||||
S -1000 1650 950 -1450 0 1 10 f
|
||||
X (INT6/AIN0)PE6 1 1100 -650 150 L 40 40 1 1 B
|
||||
X UVCC 2 -450 1800 150 D 40 40 1 1 W
|
||||
X D- 3 -1150 100 150 R 40 40 1 1 B
|
||||
X D+ 4 -1150 200 150 R 40 40 1 1 B
|
||||
X UGND 5 -400 -1600 150 U 40 40 1 1 P
|
||||
X UCAP 6 -1150 -50 150 R 40 40 1 1 P
|
||||
X VBUS 7 -1150 350 150 R 40 40 1 1 P
|
||||
X (SS/PCINT0)PB0 8 1100 1550 150 L 40 40 1 1 B
|
||||
X (SCLK/PCINT1)PB1 9 1100 1450 150 L 40 40 1 1 B
|
||||
X (PDI/MOSI/PCINT2)PB2 10 1100 1350 150 L 40 40 1 1 B
|
||||
X (RXD/INT2)PD2 20 1100 150 150 L 40 40 1 1 B
|
||||
X (ADC13/OC1B/OC4B/PCINT13)PB6 30 1100 950 150 L 40 40 1 1 B
|
||||
X (ADC1)PF1 40 1100 -950 150 L 40 40 1 1 B
|
||||
X (PDO/MISO/PCINT3)PB3 11 1100 1250 150 L 40 40 1 1 B
|
||||
X (TXD/INT3)PD3 21 1100 50 150 L 40 40 1 1 B
|
||||
X (OC3A/~OC4A~)PC6 31 1100 650 150 L 40 40 1 1 B
|
||||
X (ADC0)PF0 41 1100 -850 150 L 40 40 1 1 B
|
||||
X (OC0A/OC1C/~RTS~/PCINT7)PB7 12 1100 850 150 L 40 40 1 1 B
|
||||
X (XCK1/~CTS~)PD5 22 1100 -150 150 L 40 40 1 1 B
|
||||
X (ICP3/CLK0/OC4A)PC7 32 1100 550 150 L 40 40 1 1 B
|
||||
X AREF 42 -1150 -850 150 R 40 40 1 1 P
|
||||
X ~RESET~ 13 -1150 1550 150 R 40 40 1 1 I
|
||||
X GND 23 -50 -1600 150 U 40 40 1 1 W
|
||||
X (~HWB~)PE2 33 1100 -550 150 L 40 40 1 1 B
|
||||
X GND 43 150 -1600 150 U 40 40 1 1 W
|
||||
X VCC 14 -200 1800 150 D 40 40 1 1 W
|
||||
X AVCC 24 150 1800 150 D 40 40 1 1 W
|
||||
X VCC 34 -100 1800 150 D 40 40 1 1 W
|
||||
X AVCC 44 250 1800 150 D 40 40 1 1 W
|
||||
X GND 15 -150 -1600 150 U 40 40 1 1 W
|
||||
X (ICP2/ADC8)PD4 25 1100 -50 150 L 40 40 1 1 B
|
||||
X GND 35 50 -1600 150 U 40 40 1 1 W
|
||||
X XTAL2 16 -1150 950 150 R 40 40 1 1 O
|
||||
X (T1/~OC4D~/ADC9)PD6 26 1100 -250 150 L 40 40 1 1 B
|
||||
X (ADC7/TDI)PF7 36 1100 -1350 150 L 40 40 1 1 B
|
||||
X XTAL1 17 -1150 1150 150 R 40 40 1 1 I
|
||||
X (T0/OC4D/ADC10)PD7 27 1100 -350 150 L 40 40 1 1 B
|
||||
X (ADC6/TDO)PF6 37 1100 -1250 150 L 40 40 1 1 B
|
||||
X (OC0B/SCL/INT0)PD0 18 1100 350 150 L 40 40 1 1 B
|
||||
X (ADC11/PCINT4)PB4 28 1100 1150 150 L 40 40 1 1 B
|
||||
X (ADC5/TMS)PF5 38 1100 -1150 150 L 40 40 1 1 B
|
||||
X (SDA/INT1)PD1 19 1100 250 150 L 40 40 1 1 B
|
||||
X (ADC12/OC1A/~OC4B~/PCINT12)PB5 29 1100 1050 150 L 40 40 1 1 B
|
||||
X (ADC4/TCK)PF4 39 1100 -1050 150 L 40 40 1 1 B
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
# C
|
||||
#
|
||||
DEF C C 0 10 N Y 1 F N
|
||||
F0 "C" 0 100 40 H V L CNN
|
||||
F1 "C" 6 -85 40 H V L CNN
|
||||
F2 "~" 38 -150 30 H V C CNN
|
||||
F3 "~" 0 0 60 H V C CNN
|
||||
$FPLIST
|
||||
SM*
|
||||
C?
|
||||
C1-1
|
||||
$ENDFPLIST
|
||||
DRAW
|
||||
P 2 0 1 20 -80 -30 80 -30 N
|
||||
P 2 0 1 20 -80 30 80 30 N
|
||||
X ~ 1 0 200 170 D 40 40 1 1 P
|
||||
X ~ 2 0 -200 170 U 40 40 1 1 P
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
# CONN_7
|
||||
#
|
||||
DEF CONN_7 P 0 40 Y N 1 F N
|
||||
F0 "P" -30 0 60 V V C CNN
|
||||
F1 "CONN_7" 70 0 60 V V C CNN
|
||||
F2 "~" 0 0 60 H V C CNN
|
||||
F3 "~" 0 0 60 H V C CNN
|
||||
DRAW
|
||||
S -100 350 150 -350 0 1 0 N
|
||||
X P1 1 -350 300 250 R 50 50 1 1 P I
|
||||
X P2 2 -350 200 250 R 50 50 1 1 P I
|
||||
X P3 3 -350 100 250 R 50 50 1 1 P I
|
||||
X P4 4 -350 0 250 R 50 50 1 1 P I
|
||||
X P5 5 -350 -100 250 R 50 50 1 1 P I
|
||||
X P6 6 -350 -200 250 R 50 50 1 1 P I
|
||||
X P7 7 -350 -300 250 R 50 50 1 1 P I
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
# GND
|
||||
#
|
||||
DEF ~GND #PWR 0 0 Y Y 1 F P
|
||||
F0 "#PWR" 0 0 30 H I C CNN
|
||||
F1 "GND" 0 -70 30 H I C CNN
|
||||
F2 "~" 0 0 60 H V C CNN
|
||||
F3 "~" 0 0 60 H V C CNN
|
||||
DRAW
|
||||
P 4 0 1 0 -50 0 0 -50 50 0 -50 0 N
|
||||
X GND 1 0 0 0 U 30 30 1 1 W N
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
# R
|
||||
#
|
||||
DEF R R 0 0 N Y 1 F N
|
||||
F0 "R" 80 0 40 V V C CNN
|
||||
F1 "R" 7 1 40 V V C CNN
|
||||
F2 "~" -70 0 30 V V C CNN
|
||||
F3 "~" 0 0 30 H V C CNN
|
||||
$FPLIST
|
||||
R?
|
||||
SM0603
|
||||
SM0805
|
||||
R?-*
|
||||
SM1206
|
||||
$ENDFPLIST
|
||||
DRAW
|
||||
S -40 150 40 -150 0 1 12 N
|
||||
X ~ 1 0 250 100 D 60 60 1 1 P
|
||||
X ~ 2 0 -250 100 U 60 60 1 1 P
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
# USB-MINI-B
|
||||
#
|
||||
DEF USB-MINI-B CON 0 40 Y Y 1 F N
|
||||
F0 "CON" -250 450 60 H V C CNN
|
||||
F1 "USB-MINI-B" -50 -500 60 H V C CNN
|
||||
F2 "~" 0 0 60 H V C CNN
|
||||
F3 "~" 0 0 60 H V C CNN
|
||||
$FPLIST
|
||||
USB-Mini-B-Jack
|
||||
$ENDFPLIST
|
||||
DRAW
|
||||
S -350 400 350 -400 0 1 0 N
|
||||
X VBUS 1 -550 300 200 R 50 50 1 1 W
|
||||
X D- 2 -550 150 200 R 50 50 1 1 B
|
||||
X D+ 3 -550 0 200 R 50 50 1 1 B
|
||||
X ID 4 -550 -150 200 R 50 50 1 1 B
|
||||
X GND 5 -550 -300 200 R 50 50 1 1 W
|
||||
X SHELL1 6 550 300 200 L 50 50 1 1 B
|
||||
X SHELL2 7 550 150 200 L 50 50 1 1 B
|
||||
X SHELL3 8 550 -150 200 L 50 50 1 1 B
|
||||
X SHELL4 9 550 -300 200 L 50 50 1 1 B
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
# VCC
|
||||
#
|
||||
DEF VCC #PWR 0 0 Y Y 1 F P
|
||||
F0 "#PWR" 0 100 30 H I C CNN
|
||||
F1 "VCC" 0 100 30 H V C CNN
|
||||
F2 "~" 0 0 60 H V C CNN
|
||||
F3 "~" 0 0 60 H V C CNN
|
||||
DRAW
|
||||
X VCC 1 0 0 0 U 20 20 0 0 W N
|
||||
C 0 50 20 0 1 0 N
|
||||
P 3 0 1 0 0 0 0 30 0 30 N
|
||||
ENDDRAW
|
||||
ENDDEF
|
||||
#
|
||||
#End Library
|
||||
83
keyboards/kinesis/alvicstep/docs/kicad/kinesis.pro
Normal file
83
keyboards/kinesis/alvicstep/docs/kicad/kinesis.pro
Normal file
@ -0,0 +1,83 @@
|
||||
update=Wednesday, November 05, 2014 'pmt' 12:08:47 pm
|
||||
version=1
|
||||
last_client=pcbnew
|
||||
[cvpcb]
|
||||
version=1
|
||||
NetIExt=net
|
||||
[cvpcb/libraries]
|
||||
EquName1=devcms
|
||||
[general]
|
||||
version=1
|
||||
[eeschema]
|
||||
version=1
|
||||
PageLayoutDescrFile=
|
||||
SubpartIdSeparator=0
|
||||
SubpartFirstId=65
|
||||
LibDir=../../../lib/kicad/library
|
||||
NetFmtName=
|
||||
RptD_X=0
|
||||
RptD_Y=100
|
||||
RptLab=1
|
||||
LabSize=60
|
||||
[eeschema/libraries]
|
||||
LibName1=power
|
||||
LibName2=device
|
||||
LibName3=transistors
|
||||
LibName4=conn
|
||||
LibName5=linear
|
||||
LibName6=regul
|
||||
LibName7=74xx
|
||||
LibName8=cmos4000
|
||||
LibName9=adc-dac
|
||||
LibName10=memory
|
||||
LibName11=xilinx
|
||||
LibName12=special
|
||||
LibName13=microcontrollers
|
||||
LibName14=dsp
|
||||
LibName15=microchip
|
||||
LibName16=analog_switches
|
||||
LibName17=motorola
|
||||
LibName18=texas
|
||||
LibName19=intel
|
||||
LibName20=audio
|
||||
LibName21=interface
|
||||
LibName22=digital-audio
|
||||
LibName23=philips
|
||||
LibName24=display
|
||||
LibName25=cypress
|
||||
LibName26=siliconi
|
||||
LibName27=opto
|
||||
LibName28=atmel
|
||||
LibName29=contrib
|
||||
LibName30=valves
|
||||
LibName31=custom
|
||||
[pcbnew]
|
||||
version=1
|
||||
LastNetListRead=
|
||||
UseCmpFile=1
|
||||
PadDrill=1.016000000000
|
||||
PadDrillOvalY=1.016000000000
|
||||
PadSizeH=1.524000000000
|
||||
PadSizeV=1.524000000000
|
||||
PcbTextSizeV=1.500000000000
|
||||
PcbTextSizeH=1.500000000000
|
||||
PcbTextThickness=0.300000000000
|
||||
ModuleTextSizeV=1.000000000000
|
||||
ModuleTextSizeH=1.000000000000
|
||||
ModuleTextSizeThickness=0.150000000000
|
||||
SolderMaskClearance=0.000000000000
|
||||
SolderMaskMinWidth=0.000000000000
|
||||
DrawSegmentWidth=0.200000000000
|
||||
BoardOutlineThickness=0.100000000000
|
||||
ModuleOutlineThickness=0.150000000000
|
||||
[pcbnew/libraries]
|
||||
LibDir=../../../lib/kicad/modules
|
||||
LibName1=custom
|
||||
LibName2=Sockets
|
||||
LibName3=Connect
|
||||
LibName4=Discret
|
||||
LibName5=Divers
|
||||
LibName6=Display
|
||||
LibName7=LEDs
|
||||
LibName8=SMD_Packages
|
||||
LibName9=Sockets_DIP
|
||||
634
keyboards/kinesis/alvicstep/docs/kicad/kinesis.sch
Normal file
634
keyboards/kinesis/alvicstep/docs/kicad/kinesis.sch
Normal file
@ -0,0 +1,634 @@
|
||||
EESchema Schematic File Version 2
|
||||
LIBS:power
|
||||
LIBS:device
|
||||
LIBS:transistors
|
||||
LIBS:conn
|
||||
LIBS:linear
|
||||
LIBS:regul
|
||||
LIBS:74xx
|
||||
LIBS:cmos4000
|
||||
LIBS:adc-dac
|
||||
LIBS:memory
|
||||
LIBS:xilinx
|
||||
LIBS:special
|
||||
LIBS:microcontrollers
|
||||
LIBS:dsp
|
||||
LIBS:microchip
|
||||
LIBS:analog_switches
|
||||
LIBS:motorola
|
||||
LIBS:texas
|
||||
LIBS:intel
|
||||
LIBS:audio
|
||||
LIBS:interface
|
||||
LIBS:digital-audio
|
||||
LIBS:philips
|
||||
LIBS:display
|
||||
LIBS:cypress
|
||||
LIBS:siliconi
|
||||
LIBS:opto
|
||||
LIBS:atmel
|
||||
LIBS:contrib
|
||||
LIBS:valves
|
||||
LIBS:custom
|
||||
LIBS:kinesis-cache
|
||||
EELAYER 27 0
|
||||
EELAYER END
|
||||
$Descr A4 11693 8268
|
||||
encoding utf-8
|
||||
Sheet 1 1
|
||||
Title ""
|
||||
Date "13 nov 2014"
|
||||
Rev ""
|
||||
Comp ""
|
||||
Comment1 ""
|
||||
Comment2 ""
|
||||
Comment3 ""
|
||||
Comment4 ""
|
||||
$EndDescr
|
||||
$Comp
|
||||
L C C4
|
||||
U 1 1 545804FB
|
||||
P 2850 4250
|
||||
F 0 "C4" H 2850 4350 40 0000 L CNN
|
||||
F 1 "1uF" H 2856 4165 40 0000 L CNN
|
||||
F 2 "~" H 2888 4100 30 0000 C CNN
|
||||
F 3 "~" H 2850 4250 60 0000 C CNN
|
||||
1 2850 4250
|
||||
-1 0 0 1
|
||||
$EndComp
|
||||
$Comp
|
||||
L R R3
|
||||
U 1 1 545805E8
|
||||
P 2500 4000
|
||||
F 0 "R3" V 2580 4000 40 0000 C CNN
|
||||
F 1 "22" V 2507 4001 40 0000 C CNN
|
||||
F 2 "~" V 2430 4000 30 0000 C CNN
|
||||
F 3 "~" H 2500 4000 30 0000 C CNN
|
||||
1 2500 4000
|
||||
0 -1 -1 0
|
||||
$EndComp
|
||||
$Comp
|
||||
L R R2
|
||||
U 1 1 545805FA
|
||||
P 2500 3800
|
||||
F 0 "R2" V 2580 3800 40 0000 C CNN
|
||||
F 1 "22" V 2507 3801 40 0000 C CNN
|
||||
F 2 "~" V 2430 3800 30 0000 C CNN
|
||||
F 3 "~" H 2500 3800 30 0000 C CNN
|
||||
1 2500 3800
|
||||
0 -1 -1 0
|
||||
$EndComp
|
||||
Entry Wire Line
|
||||
6450 2450 6550 2550
|
||||
Entry Wire Line
|
||||
6450 2550 6550 2650
|
||||
Entry Wire Line
|
||||
6450 2650 6550 2750
|
||||
Entry Wire Line
|
||||
6450 2750 6550 2850
|
||||
Entry Wire Line
|
||||
6450 2950 6550 3050
|
||||
Entry Wire Line
|
||||
6450 3050 6550 3150
|
||||
Entry Wire Line
|
||||
6450 2850 6550 2950
|
||||
Entry Wire Line
|
||||
6450 3150 6550 3250
|
||||
Wire Wire Line
|
||||
10250 1800 10750 1800
|
||||
Entry Wire Line
|
||||
10750 1800 10850 1900
|
||||
Entry Wire Line
|
||||
10750 1900 10850 2000
|
||||
Entry Wire Line
|
||||
10750 2000 10850 2100
|
||||
Entry Wire Line
|
||||
10750 2800 10850 2900
|
||||
Entry Wire Line
|
||||
10750 2900 10850 3000
|
||||
Entry Wire Line
|
||||
10750 3000 10850 3100
|
||||
Entry Wire Line
|
||||
10750 3100 10850 3200
|
||||
Entry Wire Line
|
||||
10750 3200 10850 3300
|
||||
Entry Wire Line
|
||||
10750 3300 10850 3400
|
||||
$Comp
|
||||
L AT90S8515-P IC2
|
||||
U 1 1 545A62EA
|
||||
P 9250 3500
|
||||
F 0 "IC2" H 8400 5380 40 0000 L BNN
|
||||
F 1 "AT90S8515-P" H 9700 1550 40 0000 L BNN
|
||||
F 2 "DIL40" H 9250 3500 30 0000 C CIN
|
||||
F 3 "" H 9250 3500 60 0000 C CNN
|
||||
1 9250 3500
|
||||
1 0 0 -1
|
||||
$EndComp
|
||||
NoConn ~ 10250 2650
|
||||
Entry Wire Line
|
||||
10750 3650 10850 3750
|
||||
Entry Wire Line
|
||||
10750 3750 10850 3850
|
||||
Entry Wire Line
|
||||
10750 3850 10850 3950
|
||||
Entry Wire Line
|
||||
10750 3950 10850 4050
|
||||
Entry Wire Line
|
||||
10750 4050 10850 4150
|
||||
Entry Wire Line
|
||||
10750 4150 10850 4250
|
||||
Entry Wire Line
|
||||
10750 4350 10850 4450
|
||||
Entry Wire Line
|
||||
10750 4250 10850 4350
|
||||
NoConn ~ 8250 4900
|
||||
NoConn ~ 8250 5000
|
||||
NoConn ~ 8250 1800
|
||||
Wire Wire Line
|
||||
10250 1900 10750 1900
|
||||
Wire Wire Line
|
||||
10250 2000 10750 2000
|
||||
Wire Wire Line
|
||||
10250 2100 10750 2100
|
||||
Wire Wire Line
|
||||
10250 2200 10750 2200
|
||||
Wire Wire Line
|
||||
10250 2300 10750 2300
|
||||
Wire Wire Line
|
||||
10250 2400 10750 2400
|
||||
Wire Wire Line
|
||||
10250 2500 10750 2500
|
||||
Text Label 10350 1800 0 60 ~ 0
|
||||
A
|
||||
Text Label 10350 1900 0 60 ~ 0
|
||||
B
|
||||
Text Label 10350 2000 0 60 ~ 0
|
||||
C
|
||||
Text Label 10350 2100 0 60 ~ 0
|
||||
G
|
||||
Wire Wire Line
|
||||
10250 2800 10750 2800
|
||||
Wire Wire Line
|
||||
10250 2900 10750 2900
|
||||
Wire Wire Line
|
||||
10250 3000 10750 3000
|
||||
Wire Wire Line
|
||||
10250 3100 10750 3100
|
||||
Wire Wire Line
|
||||
10250 3200 10750 3200
|
||||
Wire Wire Line
|
||||
10250 3300 10750 3300
|
||||
Wire Wire Line
|
||||
10250 3400 10750 3400
|
||||
Wire Wire Line
|
||||
10250 3500 10750 3500
|
||||
Text Label 10350 2800 0 60 ~ 0
|
||||
DL2
|
||||
Text Label 10350 2900 0 60 ~ 0
|
||||
DR1
|
||||
Text Label 10350 3000 0 60 ~ 0
|
||||
DR2
|
||||
Text Label 10350 3100 0 60 ~ 0
|
||||
DL1
|
||||
Text Label 10350 3400 0 60 ~ 0
|
||||
SCL
|
||||
Text Label 10350 3500 0 60 ~ 0
|
||||
SDA
|
||||
Wire Wire Line
|
||||
10250 3650 10750 3650
|
||||
Wire Wire Line
|
||||
10250 3750 10750 3750
|
||||
Wire Wire Line
|
||||
10250 3850 10750 3850
|
||||
Wire Wire Line
|
||||
10250 3950 10750 3950
|
||||
Wire Wire Line
|
||||
10250 4050 10750 4050
|
||||
Wire Wire Line
|
||||
10250 4150 10750 4150
|
||||
Wire Wire Line
|
||||
10250 4250 10750 4250
|
||||
Wire Wire Line
|
||||
10250 4350 10750 4350
|
||||
Text Label 10350 3650 0 60 ~ 0
|
||||
R1
|
||||
Text Label 10350 3750 0 60 ~ 0
|
||||
R2
|
||||
Text Label 10350 3850 0 60 ~ 0
|
||||
R3
|
||||
Text Label 10350 3950 0 60 ~ 0
|
||||
R4
|
||||
Text Label 10350 4050 0 60 ~ 0
|
||||
R5
|
||||
Text Label 10350 4150 0 60 ~ 0
|
||||
R6
|
||||
Text Label 10350 4250 0 60 ~ 0
|
||||
R7
|
||||
Text Label 10350 4350 0 60 ~ 0
|
||||
R8
|
||||
Wire Wire Line
|
||||
10250 4500 10750 4500
|
||||
Wire Wire Line
|
||||
10250 4600 10750 4600
|
||||
Wire Wire Line
|
||||
10250 4700 10750 4700
|
||||
Wire Wire Line
|
||||
10250 4800 10750 4800
|
||||
Wire Wire Line
|
||||
10250 4900 10750 4900
|
||||
Wire Wire Line
|
||||
10250 5000 10750 5000
|
||||
Wire Wire Line
|
||||
10250 5100 10750 5100
|
||||
Wire Wire Line
|
||||
10250 5200 10750 5200
|
||||
Text Label 10350 4600 0 60 ~ 0
|
||||
FS1
|
||||
Text Label 10350 5000 0 60 ~ 0
|
||||
FS3
|
||||
Text Label 10350 5200 0 60 ~ 0
|
||||
FS2
|
||||
$Comp
|
||||
L GND #PWR01
|
||||
U 1 1 545A7377
|
||||
P 9250 5600
|
||||
F 0 "#PWR01" H 9250 5600 30 0001 C CNN
|
||||
F 1 "GND" H 9250 5530 30 0001 C CNN
|
||||
F 2 "" H 9250 5600 60 0000 C CNN
|
||||
F 3 "" H 9250 5600 60 0000 C CNN
|
||||
1 9250 5600
|
||||
1 0 0 -1
|
||||
$EndComp
|
||||
Wire Wire Line
|
||||
9250 5500 9250 5600
|
||||
Text Label 10350 4700 0 60 ~ 0
|
||||
CLOCK
|
||||
Text Label 10350 4800 0 60 ~ 0
|
||||
DATA
|
||||
NoConn ~ 10750 4700
|
||||
NoConn ~ 10750 4800
|
||||
Text Label 10350 3200 0 60 ~ 0
|
||||
KP
|
||||
Text Label 10350 3300 0 60 ~ 0
|
||||
PGM
|
||||
Text Label 10350 2500 0 60 ~ 0
|
||||
BUZZ
|
||||
NoConn ~ 8250 2300
|
||||
NoConn ~ 8250 2700
|
||||
$Comp
|
||||
L GND #PWR02
|
||||
U 1 1 545A7565
|
||||
P 4750 5700
|
||||
F 0 "#PWR02" H 4750 5700 30 0001 C CNN
|
||||
F 1 "GND" H 4750 5630 30 0001 C CNN
|
||||
F 2 "" H 4750 5700 60 0000 C CNN
|
||||
F 3 "" H 4750 5700 60 0000 C CNN
|
||||
1 4750 5700
|
||||
1 0 0 -1
|
||||
$EndComp
|
||||
Entry Wire Line
|
||||
6450 3650 6550 3750
|
||||
Entry Wire Line
|
||||
6450 3750 6550 3850
|
||||
Entry Wire Line
|
||||
6450 4150 6550 4250
|
||||
Entry Wire Line
|
||||
6450 4250 6550 4350
|
||||
Entry Wire Line
|
||||
6450 4050 6550 4150
|
||||
Entry Wire Line
|
||||
6450 4350 6550 4450
|
||||
NoConn ~ 3750 2850
|
||||
Wire Wire Line
|
||||
1200 2000 6450 2000
|
||||
NoConn ~ 3750 3050
|
||||
Wire Wire Line
|
||||
2750 3800 3750 3800
|
||||
Wire Wire Line
|
||||
2750 3900 3750 3900
|
||||
Wire Wire Line
|
||||
2750 3900 2750 4000
|
||||
Wire Bus Line
|
||||
6550 2100 6550 6050
|
||||
Wire Bus Line
|
||||
10850 1600 10850 6050
|
||||
Text Label 6050 4350 0 60 ~ 0
|
||||
DL1
|
||||
Text Label 6050 4250 0 60 ~ 0
|
||||
DR2
|
||||
Text Label 6050 4150 0 60 ~ 0
|
||||
DR1
|
||||
Text Label 6050 4050 0 60 ~ 0
|
||||
DL2
|
||||
Text Label 6050 2450 0 60 ~ 0
|
||||
R1
|
||||
Text Label 6050 2550 0 60 ~ 0
|
||||
R2
|
||||
Text Label 6050 2650 0 60 ~ 0
|
||||
R3
|
||||
Text Label 6050 2750 0 60 ~ 0
|
||||
R4
|
||||
Text Label 6050 2850 0 60 ~ 0
|
||||
R5
|
||||
Text Label 6050 2950 0 60 ~ 0
|
||||
R6
|
||||
Text Label 6050 3050 0 60 ~ 0
|
||||
R7
|
||||
Text Label 6050 3150 0 60 ~ 0
|
||||
R8
|
||||
Text Label 6050 5050 0 60 ~ 0
|
||||
A
|
||||
Text Label 6050 5150 0 60 ~ 0
|
||||
B
|
||||
Text Label 6050 5250 0 60 ~ 0
|
||||
C
|
||||
Text Label 6050 5350 0 60 ~ 0
|
||||
G
|
||||
Text Label 1300 3800 0 60 ~ 0
|
||||
D+
|
||||
Text Label 1300 4000 0 60 ~ 0
|
||||
D-
|
||||
NoConn ~ 10750 2200
|
||||
NoConn ~ 10750 2300
|
||||
NoConn ~ 10750 2400
|
||||
Text Label 10350 4500 0 60 ~ 0
|
||||
GND
|
||||
NoConn ~ 10750 4900
|
||||
NoConn ~ 10750 5100
|
||||
Text Label 6050 3450 0 60 ~ 0
|
||||
KP
|
||||
Text Label 6050 3350 0 60 ~ 0
|
||||
PGM
|
||||
$Comp
|
||||
L ATMEGA32U4-A U1
|
||||
U 1 1 5462E0B1
|
||||
P 4900 4000
|
||||
F 0 "U1" H 3950 5700 40 0000 C CNN
|
||||
F 1 "ATMEGA32U4-A" H 5600 2500 40 0000 C CNN
|
||||
F 2 "TQFP44" H 4900 4000 35 0000 C CIN
|
||||
F 3 "" H 6000 5100 60 0000 C CNN
|
||||
1 4900 4000
|
||||
1 0 0 -1
|
||||
$EndComp
|
||||
Wire Wire Line
|
||||
3750 4850 3750 5600
|
||||
Wire Wire Line
|
||||
4450 2200 5150 2200
|
||||
Connection ~ 4700 2200
|
||||
Connection ~ 4800 2200
|
||||
Connection ~ 5050 2200
|
||||
Connection ~ 4800 2000
|
||||
Wire Wire Line
|
||||
6000 2450 6450 2450
|
||||
Wire Wire Line
|
||||
6000 2550 6450 2550
|
||||
Wire Wire Line
|
||||
6000 2650 6450 2650
|
||||
Wire Wire Line
|
||||
6000 2750 6450 2750
|
||||
Wire Wire Line
|
||||
6000 2850 6450 2850
|
||||
Wire Wire Line
|
||||
6000 2950 6450 2950
|
||||
Wire Wire Line
|
||||
6000 3050 6450 3050
|
||||
Wire Wire Line
|
||||
6000 3150 6450 3150
|
||||
Wire Wire Line
|
||||
6000 5050 6450 5050
|
||||
Wire Wire Line
|
||||
6000 5150 6450 5150
|
||||
Wire Wire Line
|
||||
6000 5250 6450 5250
|
||||
Wire Wire Line
|
||||
6000 4050 6450 4050
|
||||
Wire Wire Line
|
||||
6000 4150 6450 4150
|
||||
Wire Wire Line
|
||||
6000 4250 6450 4250
|
||||
Wire Wire Line
|
||||
6000 4350 6450 4350
|
||||
Wire Wire Line
|
||||
6000 4550 6450 4550
|
||||
Entry Wire Line
|
||||
6450 3350 6550 3450
|
||||
Entry Wire Line
|
||||
6450 3450 6550 3550
|
||||
Entry Wire Line
|
||||
6450 5050 6550 5150
|
||||
Entry Wire Line
|
||||
6450 5150 6550 5250
|
||||
Entry Wire Line
|
||||
6450 5250 6550 5350
|
||||
Entry Wire Line
|
||||
6450 5350 6550 5450
|
||||
Entry Wire Line
|
||||
6450 4650 6550 4750
|
||||
Wire Wire Line
|
||||
6000 3350 6450 3350
|
||||
Wire Wire Line
|
||||
6000 3450 6450 3450
|
||||
Wire Wire Line
|
||||
1200 5600 6450 5600
|
||||
Connection ~ 4950 5600
|
||||
Connection ~ 4850 5600
|
||||
Wire Wire Line
|
||||
4750 5600 4750 5700
|
||||
Connection ~ 4750 5600
|
||||
Connection ~ 4500 5600
|
||||
Text Label 6050 4550 0 60 ~ 0
|
||||
HWB
|
||||
Wire Wire Line
|
||||
6000 5350 6450 5350
|
||||
Wire Wire Line
|
||||
6000 3650 6450 3650
|
||||
Wire Wire Line
|
||||
6000 3750 6450 3750
|
||||
Text Label 6050 3650 0 60 ~ 0
|
||||
SCL
|
||||
Text Label 6050 3750 0 60 ~ 0
|
||||
SDA
|
||||
Wire Wire Line
|
||||
6000 3850 6450 3850
|
||||
Wire Wire Line
|
||||
6000 3950 6450 3950
|
||||
Wire Wire Line
|
||||
6000 4650 6450 4650
|
||||
Text Label 6050 4650 0 60 ~ 0
|
||||
BUZZ
|
||||
NoConn ~ 10750 4600
|
||||
NoConn ~ 10750 5000
|
||||
NoConn ~ 10750 5200
|
||||
Entry Wire Line
|
||||
10750 3400 10850 3500
|
||||
Entry Wire Line
|
||||
10750 3500 10850 3600
|
||||
Entry Wire Line
|
||||
10750 4500 10850 4600
|
||||
Wire Wire Line
|
||||
2850 4050 3750 4050
|
||||
Text Label 2950 4050 0 60 ~ 0
|
||||
UCAP
|
||||
Wire Wire Line
|
||||
6000 4850 6450 4850
|
||||
Wire Wire Line
|
||||
6000 4950 6450 4950
|
||||
NoConn ~ 6450 4850
|
||||
NoConn ~ 6450 4950
|
||||
NoConn ~ 6450 4550
|
||||
$Comp
|
||||
L USB-MINI-B CON1
|
||||
U 1 1 546431C1
|
||||
P 2100 5050
|
||||
F 0 "CON1" H 1850 5500 60 0000 C CNN
|
||||
F 1 "USB-MINI-B" H 2050 4550 60 0000 C CNN
|
||||
F 2 "" H 2100 5050 60 0000 C CNN
|
||||
F 3 "" H 2100 5050 60 0000 C CNN
|
||||
1 2100 5050
|
||||
0 1 1 0
|
||||
$EndComp
|
||||
$Comp
|
||||
L VCC #PWR03
|
||||
U 1 1 54643698
|
||||
P 2400 4400
|
||||
F 0 "#PWR03" H 2400 4500 30 0001 C CNN
|
||||
F 1 "VCC" H 2400 4500 30 0000 C CNN
|
||||
F 2 "" H 2400 4400 60 0000 C CNN
|
||||
F 3 "" H 2400 4400 60 0000 C CNN
|
||||
1 2400 4400
|
||||
1 0 0 -1
|
||||
$EndComp
|
||||
Text Notes 2600 2750 0 60 ~ 0
|
||||
Teensy 2.0\n(not fully drawn)
|
||||
$Comp
|
||||
L CONN_7 B7K-PH-K-S1
|
||||
U 1 1 54643939
|
||||
P 1950 6900
|
||||
F 0 "B7K-PH-K-S1" V 1920 6900 60 0000 C CNN
|
||||
F 1 "CONN_7" V 2020 6900 60 0000 C CNN
|
||||
F 2 "" H 1950 6900 60 0000 C CNN
|
||||
F 3 "" H 1950 6900 60 0000 C CNN
|
||||
1 1950 6900
|
||||
1 0 0 -1
|
||||
$EndComp
|
||||
Connection ~ 3750 5600
|
||||
Connection ~ 2400 5600
|
||||
Connection ~ 2250 5600
|
||||
Connection ~ 1950 5600
|
||||
Wire Wire Line
|
||||
2400 4400 2400 4500
|
||||
Wire Wire Line
|
||||
2250 4000 2250 4500
|
||||
Wire Wire Line
|
||||
1200 3800 2250 3800
|
||||
Wire Wire Line
|
||||
2100 3800 2100 4500
|
||||
Wire Wire Line
|
||||
2850 4450 2850 5600
|
||||
Connection ~ 2850 5600
|
||||
Entry Wire Line
|
||||
1100 6800 1200 6900
|
||||
Entry Wire Line
|
||||
1100 6900 1200 7000
|
||||
Entry Wire Line
|
||||
1100 7000 1200 7100
|
||||
Entry Wire Line
|
||||
1100 6700 1200 6800
|
||||
Wire Wire Line
|
||||
1200 6600 1600 6600
|
||||
Wire Wire Line
|
||||
1200 6700 1600 6700
|
||||
Wire Wire Line
|
||||
1200 6800 1600 6800
|
||||
Wire Wire Line
|
||||
1200 6900 1600 6900
|
||||
Wire Wire Line
|
||||
1200 7000 1600 7000
|
||||
Wire Wire Line
|
||||
1200 7100 1600 7100
|
||||
Wire Wire Line
|
||||
1200 7200 1600 7200
|
||||
Text Label 1300 6600 0 60 ~ 0
|
||||
FS2
|
||||
Text Label 1300 6700 0 60 ~ 0
|
||||
FS1
|
||||
Text Label 1300 6800 0 60 ~ 0
|
||||
VCC
|
||||
Text Label 1300 6900 0 60 ~ 0
|
||||
D-
|
||||
Text Label 1300 7000 0 60 ~ 0
|
||||
D+
|
||||
Text Label 1300 7100 0 60 ~ 0
|
||||
GND
|
||||
Text Label 1300 7200 0 60 ~ 0
|
||||
FS3
|
||||
NoConn ~ 3750 2450
|
||||
Wire Wire Line
|
||||
3600 2000 3600 3650
|
||||
Wire Wire Line
|
||||
3600 3650 3750 3650
|
||||
NoConn ~ 1950 4500
|
||||
Wire Bus Line
|
||||
1100 1900 1100 7100
|
||||
NoConn ~ 1200 6600
|
||||
NoConn ~ 1200 6700
|
||||
NoConn ~ 1200 7200
|
||||
Connection ~ 2100 3800
|
||||
Wire Wire Line
|
||||
1200 4000 2250 4000
|
||||
Entry Wire Line
|
||||
1100 3700 1200 3800
|
||||
Entry Wire Line
|
||||
1100 3900 1200 4000
|
||||
Text Label 10350 1500 0 60 ~ 0
|
||||
VCC
|
||||
Entry Wire Line
|
||||
1100 1900 1200 2000
|
||||
Text Label 1250 2000 0 60 ~ 0
|
||||
VCC
|
||||
Entry Wire Line
|
||||
1100 5500 1200 5600
|
||||
Connection ~ 1800 5600
|
||||
Text Label 1300 5600 0 60 ~ 0
|
||||
GND
|
||||
Wire Wire Line
|
||||
9250 5500 10750 5500
|
||||
Entry Wire Line
|
||||
10750 5500 10850 5600
|
||||
Text Label 10350 5500 0 60 ~ 0
|
||||
GND
|
||||
Wire Wire Line
|
||||
9250 1500 10750 1500
|
||||
Entry Wire Line
|
||||
10750 1500 10850 1600
|
||||
Connection ~ 3600 2000
|
||||
Wire Wire Line
|
||||
4800 2000 4800 2200
|
||||
Entry Wire Line
|
||||
6450 2000 6550 2100
|
||||
Text Label 6050 2000 0 60 ~ 0
|
||||
VCC
|
||||
Connection ~ 5050 5600
|
||||
Entry Wire Line
|
||||
6450 5600 6550 5700
|
||||
Text Label 6050 5600 0 60 ~ 0
|
||||
GND
|
||||
NoConn ~ 6450 3850
|
||||
NoConn ~ 6450 3950
|
||||
Wire Wire Line
|
||||
1800 4500 1500 4500
|
||||
Wire Wire Line
|
||||
1500 4500 1500 5600
|
||||
Connection ~ 1500 5600
|
||||
Entry Wire Line
|
||||
10750 2500 10850 2600
|
||||
Entry Wire Line
|
||||
10750 2100 10850 2200
|
||||
Text Notes 1000 5300 1 60 ~ 0
|
||||
Sacrificial USB cable from header to Teensy
|
||||
Text Notes 7850 5950 0 60 ~ 0
|
||||
Ribbon cable between Teensy pins and socket
|
||||
Wire Bus Line
|
||||
10850 6050 6550 6050
|
||||
$EndSCHEMATC
|
||||
BIN
keyboards/kinesis/alvicstep/docs/photos/P1050573.jpg
Normal file
BIN
keyboards/kinesis/alvicstep/docs/photos/P1050573.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 174 KiB |
BIN
keyboards/kinesis/alvicstep/docs/photos/P1050574.jpg
Normal file
BIN
keyboards/kinesis/alvicstep/docs/photos/P1050574.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 336 KiB |
BIN
keyboards/kinesis/alvicstep/docs/photos/P1050575.jpg
Normal file
BIN
keyboards/kinesis/alvicstep/docs/photos/P1050575.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 260 KiB |
52
keyboards/kinesis/alvicstep/docs/readme.txt
Normal file
52
keyboards/kinesis/alvicstep/docs/readme.txt
Normal file
@ -0,0 +1,52 @@
|
||||
This directory of documentation was copied from https://github.com/wjanssens/tmk_keyboard/tree/master/keyboard/kinesis
|
||||
and is probably Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
|
||||
and probably released under GPL v2, which may be recovered at <http://www.gnu.org/licenses/>.
|
||||
|
||||
Row configuration
|
||||
PF0 A
|
||||
PF1 B
|
||||
PF2 C
|
||||
PF3 G 0 = U4, 1 = U5
|
||||
|
||||
Column configuration
|
||||
4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7
|
||||
r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16
|
||||
PB0 21 c1 f6 f8 f7 5 4 3 2 1 =+
|
||||
PB1 22 c2 f3 f5 f4 t r e w q TAB
|
||||
PB2 23 c3 ESC f2 f1 g f d s a CL
|
||||
PB3 24 c4 f9 f11 f10 b v c x z LS UP DN [{ ]}
|
||||
PB4 25 c5 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_
|
||||
PB5 26 c6 PB PGM KPD y u i o p \
|
||||
PB6 27 c7 LC DL BS RC EN SP h j k l ;: '"
|
||||
PB7 28 c8 RA PU PD n m ,< .> /? RS
|
||||
*/
|
||||
|
||||
|
||||
40 pin connector
|
||||
|
||||
DL2 1 40 VCC
|
||||
DR1 2 39 A
|
||||
DR2 3 38 B
|
||||
DL1 4 37 C
|
||||
KPD 5 36 G
|
||||
PGM 6 35
|
||||
SCL 7 34
|
||||
SDA 8 33
|
||||
RST 9 32 BUZZ
|
||||
WP 10 31 EA
|
||||
FS1 11 30 ALE
|
||||
CLOCK 12 29 PSEN
|
||||
DATA 13 28 r8
|
||||
14 27 r7
|
||||
FS3 15 26 r6
|
||||
16 25 r5
|
||||
FS2 17 24 r4
|
||||
XTAL1 18 23 r3
|
||||
XTAL2 19 22 r2
|
||||
GND 20 21 r1
|
||||
|
||||
|
||||
references:
|
||||
https://github.com/chrisandreae/keyboard-firmware
|
||||
|
||||
|
||||
BIN
keyboards/kinesis/alvicstep/docs/schematic.png
Normal file
BIN
keyboards/kinesis/alvicstep/docs/schematic.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 171 KiB |
46
keyboards/kinesis/alvicstep/readme.md
Normal file
46
keyboards/kinesis/alvicstep/readme.md
Normal file
@ -0,0 +1,46 @@
|
||||
kinesis-advantage keyboard firmware
|
||||
======================
|
||||
|
||||
This directory is called alvicstep because https://github.com/alvicstep did the heavy work and took the photos in the doc directory.
|
||||
alvicstep did NOT do anything related to the QMK implementation, so don't bug him/her.
|
||||
|
||||
There are other ways of replacing the CPU in the kinesis, this one uses jumper wires from the Teensy to the original DIP socket
|
||||
|
||||
|
||||
## Kinesis specific information
|
||||
This is a port of https://github.com/alvicstep/tmk_keyboard,
|
||||
which is a fork of https://github.com/wjanssens/tmk_keyboard,
|
||||
which is based on work from https://github.com/chrisandreae/keyboard-firmware
|
||||
|
||||
If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK.
|
||||
I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead.
|
||||
|
||||
Not yet implemented:
|
||||
- Kinesis EEProm reading or writing
|
||||
- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
|
||||
|
||||
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
|
||||
|
||||
$ make keymap=[default|jack|<name>]
|
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||
10
keyboards/kinesis/alvicstep/rules.mk
Normal file
10
keyboards/kinesis/alvicstep/rules.mk
Normal file
@ -0,0 +1,10 @@
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
# just silently stop, since we need to upload with teensy uploader
|
||||
upload: build
|
||||
|
||||
|
||||
|
||||
|
||||
@ -22,58 +22,22 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER You
|
||||
#define PRODUCT kinesis-advantage
|
||||
#define DESCRIPTION A custom keyboard
|
||||
|
||||
// Mouse
|
||||
#define MOUSEKEY_DELAY 20
|
||||
#define MOUSEKEY_DELAY 60
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_MAX_SPEED 4
|
||||
#define MOUSEKEY_TIME_TO_MAX 20
|
||||
#define MOUSEKEY_TIME_TO_MAX 10
|
||||
#define MOUSEKEY_WHEEL_MAX_SPEED 1
|
||||
#define MOUSEKEY_WHEEL_DELTA 1
|
||||
#define MOUSEKEY_WHEEL_TIME_TO_MAX 1
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 16
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
//Passed through the port multipler, so 4 pins =16
|
||||
#define MATRIX_ROW_PINS { F0,F1, F2, F3 }
|
||||
|
||||
// May be upside down.
|
||||
#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
@ -171,4 +135,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
|
||||
|
||||
#ifdef SUBPROJECT_alvicstep
|
||||
#include "alvicstep/config.h"
|
||||
#endif
|
||||
#ifdef SUBPROJECT_stapelberg
|
||||
#include "stapelberg/config.h"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
@ -1,10 +1,6 @@
|
||||
#include "kinesis.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define QWERTY 0 // Base qerty
|
||||
#define SYMB 1// Symbol layer
|
||||
|
||||
// An almost entirely blank keymap. Test layers with the upper right hand key - 1 in normal mode, reset in layer 2.
|
||||
#define QWERTY 0 // Base qwerty
|
||||
|
||||
|
||||
/****************************************************************************************************
|
||||
@ -33,7 +29,6 @@
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[QWERTY] = KEYMAP(
|
||||
KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8,
|
||||
@ -45,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
KC_LCTL,KC_LALT,
|
||||
KC_HOME,
|
||||
KC_BSPC,KC_DEL ,KC_END ,
|
||||
KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, KC_1,
|
||||
KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, KC_1,
|
||||
KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS,
|
||||
KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS,
|
||||
KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT,
|
||||
@ -54,32 +49,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
KC_RGUI,KC_RCTL,
|
||||
KC_PGUP,
|
||||
KC_PGDN,KC_ENTER ,KC_SPC
|
||||
),
|
||||
[SYMB] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, RESET,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_TAP_TOGGLE(SYMB) , // FN1 - Momentary Layer 1 (Symbols)
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
|
||||
21
keyboards/kinesis/keymaps/dvorak/Makefile
Normal file
21
keyboards/kinesis/keymaps/dvorak/Makefile
Normal file
@ -0,0 +1,21 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
8
keyboards/kinesis/keymaps/dvorak/config.h
Normal file
8
keyboards/kinesis/keymaps/dvorak/config.h
Normal file
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
93
keyboards/kinesis/keymaps/dvorak/keymap.c
Normal file
93
keyboards/kinesis/keymaps/dvorak/keymap.c
Normal file
@ -0,0 +1,93 @@
|
||||
#include "kinesis.h"
|
||||
|
||||
#define _DVORAK 0 // Base Dvorak layer
|
||||
#define _MEDIA 1 // Media layer
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_DVORAK] = KEYMAP(
|
||||
// left hand
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5,
|
||||
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y,
|
||||
KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I,
|
||||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X,
|
||||
KC_ESC, KC_LBRC, KC_DOWN, KC_UP,
|
||||
// left thumb
|
||||
KC_LGUI, KC_LCTL,
|
||||
KC_LALT,
|
||||
KC_BSPC, KC_DEL, TG(_MEDIA),
|
||||
// right hand
|
||||
KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_FN0, KC_1,
|
||||
KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL,
|
||||
KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,
|
||||
KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,
|
||||
KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,
|
||||
KC_LEFT, KC_RIGHT, KC_RBRC, KC_BSLS,
|
||||
// right thumb
|
||||
KC_RCTL, KC_RGUI,
|
||||
KC_RALT,
|
||||
TG(_MEDIA), KC_ENT, KC_SPC
|
||||
),
|
||||
|
||||
[_MEDIA] = KEYMAP(
|
||||
// left hand
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_BTN4, KC_BTN3, KC_BTN2, KC_BTN1, KC_NO,
|
||||
KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,
|
||||
KC_NO, KC_NO, KC_MS_D, KC_MS_U,
|
||||
// left thumb
|
||||
KC_NO, KC_NO,
|
||||
KC_NO,
|
||||
KC_NO, KC_NO, KC_TRNS,
|
||||
// right hand
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_POWER,
|
||||
KC_NO, KC_VOLU, KC_MS_U, KC_VOLD, KC_NO, KC_NO,
|
||||
KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO,
|
||||
KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, KC_NO,
|
||||
KC_MS_L, KC_MS_R, KC_NO, KC_NO,
|
||||
// right thumb
|
||||
KC_NO, KC_NO,
|
||||
KC_NO,
|
||||
KC_TRNS, KC_ENT, KC_NO
|
||||
)
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
21
keyboards/kinesis/keymaps/milestogo/Makefile
Normal file
21
keyboards/kinesis/keymaps/milestogo/Makefile
Normal file
@ -0,0 +1,21 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
8
keyboards/kinesis/keymaps/milestogo/config.h
Normal file
8
keyboards/kinesis/keymaps/milestogo/config.h
Normal file
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
331
keyboards/kinesis/keymaps/milestogo/keymap.c
Normal file
331
keyboards/kinesis/keymaps/milestogo/keymap.c
Normal file
@ -0,0 +1,331 @@
|
||||
#include "kinesis.h"
|
||||
#include "action_layer.h"
|
||||
#include "mousekey.h"
|
||||
|
||||
#define _QWERTY 0 // Base qerty
|
||||
#define _SYMB 1// Symbol layer
|
||||
#define _MOUSE 2//
|
||||
#define _TRANS 3//
|
||||
|
||||
|
||||
|
||||
/* Macros */
|
||||
enum {
|
||||
NONE = 0,
|
||||
// Diagonal mouse movement
|
||||
A_MUL,
|
||||
A_MUR,
|
||||
A_MDL,
|
||||
A_MDR,
|
||||
};
|
||||
|
||||
|
||||
// Why so many gui keys, why not just map all the OS X stuff to buttons? Good question.
|
||||
/****************************************************************************************************
|
||||
*
|
||||
* Keymap: Default Layer in Qwerty
|
||||
*
|
||||
* ,-------------------------------------------------------------------------------------------------------------------.
|
||||
* | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | | bOOT |
|
||||
* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
|
||||
* | =+ | 1! | 2@ | 3# | 4$ | 5% | | 6^ | 7& | 8* | 9( | 0) | -_ |
|
||||
* |--------+------+------+------+------+------| +------+------+------+------+------+--------|
|
||||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | \| |
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* |MouseFN0| A | S | D | F | G | | H | J | K | L | ;: | '" |
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* | Shift | Z | X | C | V | B | | N | M | ,. | .> | /? | Shift |
|
||||
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
|
||||
* | ~` | ESC |GUI/L |L1/RT | | L1/UP|GUI/DN| [{ | ]} |
|
||||
* `---------------------------' `---------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | CTRL | GUI | | ALT | GUI |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | Home | | PgUp | | |
|
||||
* | BkSp | Del |------| |------|Return| Space|
|
||||
* | | | End | | PgDn | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_QWERTY] = KEYMAP(
|
||||
KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8,
|
||||
KC_EQL, KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,
|
||||
KC_TAB, KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,
|
||||
KC_FN0 ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,
|
||||
KC_LSFT,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,
|
||||
KC_GRAVE, KC_ESC, KC_FN4, KC_FN5,
|
||||
KC_LCTL,KC_LGUI,
|
||||
KC_HOME,
|
||||
KC_BSPC,KC_DEL ,KC_FN0 ,
|
||||
KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_FN0 ,KC_FN1 ,KC_FN2, KC_NO, RESET,
|
||||
KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS,
|
||||
KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS,
|
||||
KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT,
|
||||
KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSFT,
|
||||
KC_FN6, KC_FN7, KC_LBRC ,KC_RBRC,
|
||||
KC_RALT,KC_RGUI,
|
||||
KC_PGUP,
|
||||
KC_PGDN,KC_ENTER ,KC_SPC
|
||||
),
|
||||
|
||||
/* _SYMBol level
|
||||
*
|
||||
* ,-------------------------------------------------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | | bOOT |
|
||||
* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
|
||||
* | | | * | # | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| +------+------+------+------+------+--------|
|
||||
* | | / | [ | ] | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* | | | { | } | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* | | = | ( | ) | | | | | | | | | |
|
||||
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
|
||||
* | | |GUI/L |L1/RT | | L1/UP|GUI/DN| { | } |
|
||||
* `---------------------------' `---------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | CTRL | GUI | | ALT | GUI |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | Home | | PgUp | | |
|
||||
* | BkSp | Del |------| |------|Mouse1|Mouse2|
|
||||
* | | | End | | PgDn |LClick|Rclick|
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
|
||||
|
||||
|
||||
[_SYMB] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_ASTR, KC_HASH, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_SLSH, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, RSFT(KC_LBRC), RSFT(KC_RBRC), KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_EQL, RSFT(KC_9), RSFT(KC_0), KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_FN4, KC_FN5,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, KC_2,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_FN6, KC_FN7, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
/* Keymap: Movement and function layer
|
||||
*
|
||||
* ,-------------------------------------------------------------------------------------------------------------------.
|
||||
* | Caps | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | Tada | bOOT |
|
||||
* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
|
||||
* | =+ | ! | @ | # | $ | % | | ^ | & | * | ( | ) |MS Fast |
|
||||
* |--------+------+------+------+------+------| +------+------+------+------+------+--------|
|
||||
* | Tab | | | Up | |PgUp | | MwU |MS_UL | MS_U |MS_UR | | Ms Norm|
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* |MouseFN1| C^A | Left | Down |Right | C^E | | | MS_L |Mouse1| MS_R | |MS Slow |
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* | | GuiZ | GUI X| GUI C| GUI_V|PgDown| | MWD | MDown|MS Dwn|MS_DR | ? | |
|
||||
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
|
||||
* | `~ | ESC | | | | | | { | } |
|
||||
* `---------------------------' `---------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | CTRL | GUI | | ALT | GUI |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | Home | | PgUp | | |
|
||||
* | BkSp | Del |------| |------|Mouse1|Mouse2|
|
||||
* | | | End | | PgDn |LClick|Rclick|
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
|
||||
|
||||
[_MOUSE] = KEYMAP(
|
||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_EXLM ,KC_AT, KC_HASH, KC_DLR ,KC_PERC ,
|
||||
KC_TRNS, KC_NO, KC_NO, KC_UP, KC_NO, KC_PGUP,
|
||||
KC_FN1, LCTL(KC_A),KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_E),
|
||||
KC_TRNS, LGUI(KC_Z),LGUI(KC_X),LGUI(KC_C),LGUI(KC_V),KC_PGDN,
|
||||
KC_TRNS, KC_TRNS, KC_NO, KC_NO,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0,RESET,
|
||||
KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_ACL2,
|
||||
KC_WH_U, M(A_MUL), KC_MS_U, M(A_MUR), KC_NO, KC_ACL1,
|
||||
KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_ACL0,
|
||||
KC_WH_D, M(A_MDL), KC_MS_D, M(A_MDR), RSFT(KC_LBRC), RSFT(KC_RBRC),
|
||||
KC_LCBR, KC_RCBR, KC_NO, KC_NO,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_BTN1, KC_BTN2
|
||||
),
|
||||
|
||||
|
||||
|
||||
/* EMPTY
|
||||
*
|
||||
* ,-------------------------------------------------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | | bOOT |
|
||||
* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| +------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | |
|
||||
* `--------+------+------+------+------+------- `------+------+------+------+------+--------'
|
||||
* | | | | | | | | | |
|
||||
* `---------------------------' `---------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | Ctrl | Alt | | Gui | Ctrl |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | Home | | PgUp | | |
|
||||
* | BkSp | Del |------| |------|Mouse1|Mouse2|
|
||||
* | | | End | | PgDn |LClick|Rclick|
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
|
||||
|
||||
|
||||
[_TRANS] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_FN10, KC_FN11, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, KC_2,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
|
||||
};
|
||||
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_TAP_TOGGLE(_MOUSE) ,
|
||||
[1] = ACTION_LAYER_TOGGLE(_MOUSE) ,
|
||||
[2] = ACTION_LAYER_TAP_TOGGLE(_SYMB) ,
|
||||
[5]= ACTION_LAYER_TAP_KEY(_SYMB,KC_RIGHT),
|
||||
[4]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_LEFT),
|
||||
[6]= ACTION_LAYER_TAP_KEY(_SYMB,KC_UP),
|
||||
[7]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_DOWN),
|
||||
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
|
||||
// from algernon's ErgoDox EZ layout,
|
||||
case A_MUL:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_UP);
|
||||
mousekey_on(KC_MS_LEFT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_UP);
|
||||
mousekey_off(KC_MS_LEFT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
|
||||
case A_MUR:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_UP);
|
||||
mousekey_on(KC_MS_RIGHT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_UP);
|
||||
mousekey_off(KC_MS_RIGHT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
|
||||
case A_MDL:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_DOWN);
|
||||
mousekey_on(KC_MS_LEFT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_DOWN);
|
||||
mousekey_off(KC_MS_LEFT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
|
||||
case A_MDR:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_DOWN);
|
||||
mousekey_on(KC_MS_RIGHT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_DOWN);
|
||||
mousekey_off(KC_MS_RIGHT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
#ifdef ALVICSTEP_CONFIG_H
|
||||
int8_t layer = biton32(layer_state);
|
||||
|
||||
switch (layer) {
|
||||
case 1:
|
||||
if (!(host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK))) {
|
||||
all_led_off();
|
||||
caps_lock_led_on();
|
||||
}
|
||||
break;
|
||||
|
||||
case 2:
|
||||
if (!(host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK))) {
|
||||
all_led_off();
|
||||
scroll_lock_led_on();
|
||||
}
|
||||
case 0:
|
||||
all_led_off();
|
||||
num_lock_led_on();
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
2
keyboards/kinesis/keymaps/milestogo/readme.md
Normal file
2
keyboards/kinesis/keymaps/milestogo/readme.md
Normal file
@ -0,0 +1,2 @@
|
||||
# a programmer friendly keymap for the kinesis-advantage
|
||||
# not really baked yet.
|
||||
@ -1,106 +1 @@
|
||||
#include "kinesis.h"
|
||||
|
||||
// begin section origin https://github.com/alvicstep/tmk_keyboard
|
||||
|
||||
|
||||
void all_led_off(void)
|
||||
{
|
||||
PORTD = 0b11111111;
|
||||
}
|
||||
|
||||
void all_led_on(void)
|
||||
{
|
||||
PORTD = 0b00000000;
|
||||
}
|
||||
void num_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b11101111;
|
||||
}
|
||||
|
||||
void caps_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b01111111;
|
||||
}
|
||||
|
||||
void scroll_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b11011111;
|
||||
}
|
||||
void keypad_led_on(void)
|
||||
{
|
||||
PORTD = 0b10111111;
|
||||
}
|
||||
void blink_all_leds(void)
|
||||
{
|
||||
all_led_on();
|
||||
_delay_ms(500);
|
||||
|
||||
all_led_off();
|
||||
_delay_ms(100);
|
||||
|
||||
caps_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
num_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
scroll_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
keypad_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
//back
|
||||
|
||||
scroll_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
num_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
caps_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
all_led_off();
|
||||
}
|
||||
|
||||
// End section origin https://github.com/alvicstep/tmk_keyboard
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
blink_all_leds();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
//Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
|
||||
uint8_t leds = 0xF0;
|
||||
if (usb_led & 1 << USB_LED_NUM_LOCK)
|
||||
leds &= ~0x10;
|
||||
if (usb_led & 1 << USB_LED_CAPS_LOCK)
|
||||
leds &= ~0x80;
|
||||
if (usb_led & 1 << USB_LED_SCROLL_LOCK)
|
||||
leds &= ~0x20;
|
||||
PORTD = (PORTD & 0x0F) | leds;
|
||||
|
||||
led_set_user(usb_led);
|
||||
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -1,67 +1,23 @@
|
||||
#ifndef KINESIS_H
|
||||
#define KINESIS_H
|
||||
|
||||
#ifdef SUBPROJECT_alvicstep
|
||||
#include "alvicstep.h"
|
||||
#endif
|
||||
#ifdef SUBPROJECT_stapelberg
|
||||
#include "stapelberg.h"
|
||||
#endif
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
void all_led_off(void);
|
||||
void all_led_on(void);
|
||||
void num_lock_led_on(void);
|
||||
void caps_lock_led_on(void);
|
||||
void scroll_lock_led_on(void);
|
||||
void keypad_led_on(void);
|
||||
|
||||
#define KEYMAP( \
|
||||
k02,k22,k12,k01,k21,k11,k00,k20,k10, \
|
||||
k80,k70,k60,k50,k40,k30, \
|
||||
k81,k71,k61,k51,k41,k31, \
|
||||
k82,k72,k62,k52,k42,k32, \
|
||||
k83,k73,k63,k53,k43,k33, \
|
||||
k74,k64,k54,k34, \
|
||||
k36,k35, \
|
||||
k55, \
|
||||
k56,k46,k75, \
|
||||
k03,k23,k13,k04,k24,k14,k05,k85,k84, \
|
||||
k94,kA4,kB4,kD4,kE4,kF4, \
|
||||
k95,kA5,kB5,kD5,kE5,kF5, \
|
||||
k96,kA6,kB6,kD6,kE6,kF6, \
|
||||
k97,kA7,kB7,kD7,kE7,kF7, \
|
||||
k93,kB3,kD3,kE3, \
|
||||
k47,k66, \
|
||||
k67, \
|
||||
k87,k76,k86 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
|
||||
{ k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, KC_NO }, \
|
||||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56, KC_NO }, \
|
||||
{ k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, KC_NO }, \
|
||||
{ k80, k81, k82, k83, KC_NO ,KC_NO, k86, k87}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, k84, k85}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \
|
||||
}
|
||||
|
||||
|
||||
/* 4y0 A 4y1 B 4y2 4y3 D 4y4 E 4y5 F 4y6 G 4y7 H 5y0 I 5y1 J 5y2 K 5y3 L 5y4 M 5y5 N 5y6 O 5y7 P */
|
||||
|
||||
/*
|
||||
0 1 2 3 4 5 6 7 8 9 A B C D E F
|
||||
A B C D E F G H I J K L M N O P
|
||||
4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7
|
||||
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15
|
||||
0 PB0 21 c0 f6 f8 f7 5 4 3 2 1 =+
|
||||
1 PB1 22 c1 f3 f5 f4 t r e w q TAB
|
||||
2 PB2 23 c2 ESC f2 f1 g f d s a CL
|
||||
3 PB3 24 c3 f9 f11 f10 b v c x z LS UP DN [{ ]}
|
||||
4 PB4 25 c4 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_
|
||||
5 PB5 26 c5 PB PGM KPD LA HM END y u i o p \
|
||||
6 PB6 27 c6 LC DEL BS RC ENT SP h j k l ;: '"
|
||||
7 PB7 28 c7 RA PU PD n m ,< .> /? RS
|
||||
*/
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
@ -1,42 +1,12 @@
|
||||
kinesis-advantage keyboard firmware
|
||||
======================
|
||||
# Firmware for the Kinesis advantage keyboard
|
||||
|
||||
## Kinesis specific information
|
||||
This is a port of https://github.com/alvicstep/tmk_keyboard,
|
||||
which is a fork of https://github.com/wjanssens/tmk_keyboard,
|
||||
which is based on work from https://github.com/chrisandreae/keyboard-firmware
|
||||
There are at least two different ways to replace the controller in this keyboard.
|
||||
|
||||
If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK.
|
||||
I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead.
|
||||
The Stapelberg folder contains the docs and configuration for using the custom controller created by Michael Stapelberg.
|
||||
|
||||
Not yet implemented:
|
||||
- Kinesis EEProm reading or writing
|
||||
- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
|
||||
The alvicstep folder contains docs and configuration for directly wiring a Teensy2++ to the existing controller board. This follows the pinouts described in https://github.com/alvicstep/tmk_keyboard, which is where the name comes from.
|
||||
|
||||
## Keymaps
|
||||
Both hardware solutions should work with the same keymaps
|
||||
|
||||
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make default`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
|
||||
|
||||
```
|
||||
$ make [default|jack|<name>]
|
||||
```
|
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||
|
||||
3
keyboards/kinesis/stapelberg/Makefile
Normal file
3
keyboards/kinesis/stapelberg/Makefile
Normal file
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
50
keyboards/kinesis/stapelberg/config.h
Normal file
50
keyboards/kinesis/stapelberg/config.h
Normal file
@ -0,0 +1,50 @@
|
||||
#ifndef STAPELBERG_CONFIG_H
|
||||
#define STAPELBERG_CONFIG_H
|
||||
|
||||
#include "../config.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0002
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 15
|
||||
#define MATRIX_COLS 7
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C0, C1, C2, C3, C4, C5, C6 }
|
||||
#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* don't know if this should be defined at the board or top level. Assuming board
|
||||
#define MOUSEKEY_DELAY 100
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_MAX_SPEED 3
|
||||
#define MOUSEKEY_TIME_TO_MAX 10
|
||||
*/
|
||||
|
||||
#define IGNORE_MOD_TAP_INTERRUPT
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
|
||||
#endif
|
||||
BIN
keyboards/kinesis/stapelberg/images/controller_board.jpg
Normal file
BIN
keyboards/kinesis/stapelberg/images/controller_board.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 126 KiB |
BIN
keyboards/kinesis/stapelberg/images/exterior_reset.jpg
Normal file
BIN
keyboards/kinesis/stapelberg/images/exterior_reset.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 96 KiB |
BIN
keyboards/kinesis/stapelberg/images/teensy_detail.jpg
Normal file
BIN
keyboards/kinesis/stapelberg/images/teensy_detail.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 117 KiB |
55
keyboards/kinesis/stapelberg/readme.md
Normal file
55
keyboards/kinesis/stapelberg/readme.md
Normal file
@ -0,0 +1,55 @@
|
||||
# kinesis_stapelberg keyboard firmware
|
||||
|
||||
This folder contains the firmware customization required to run QMK on the custom controller for the Kinesis Advantage created by Michael Stapelberg.
|
||||
It differs from the `alvicstep keyboard in that the existing QMK Kinesis Advantage project uses the existing controller board provided by Kinesis.
|
||||
|
||||
The controller board hardware is described
|
||||
[here](http://michael.stapelberg.de/Artikel/kinesis_custom_controller)
|
||||
|
||||
Mapping the pin assignments was done using the corresponding matrix description provided at this
|
||||
[link](https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec)
|
||||
|
||||
This code makes no attempt to drive the four LEDs provided on the controller board.
|
||||
|
||||
|
||||
## Building the Hardware
|
||||
|
||||
If you want to perform this customization, these parts may be helpful.
|
||||
|
||||
| Function | Quantity | Vendor | Part Number |
|
||||
| ------------------------------------------------------ | -------- | ------- | ------------ |
|
||||
| 13 pin connector for function keys and finger keywells | 4 | Digi-Key | WM14526-ND |
|
||||
| 10 pin headers for thumb clusters | 4 | Digi-Key | 609-3250-ND |
|
||||
| 8 pin cable for thumb clusters | 2 | Digi-Key | SAM8928-ND |
|
||||
| Teensy++ 2.0 | 1 | Digi-Key | 1528-1056-ND |
|
||||
| 2 pin right angle header for reset | 1 | Digi-Key | 3M9467-ND |
|
||||
| Reset cables | 2 | Sparkfun | PRT-09140 |
|
||||
|
||||
The board and connections are shown here
|
||||
|
||||
|
||||
The Teensy mounting detail can be seen here.
|
||||
I used a socket for prototyping.
|
||||
|
||||
|
||||
|
||||
Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board.
|
||||
Shorting these two pins together will reset the board.
|
||||
I also put female to male header jumper cables on these so they could be accessed outside the enclosure.
|
||||
The exterior cables can be seen here.
|
||||
|
||||
|
||||
|
||||
## Keymaps
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, run `make default` while in the
|
||||
`kinesis_stapelberg` working directory.
|
||||
|
||||
### Dvorak
|
||||
|
||||
This keymap contains a dvorak implementation as well as media and symbol layers.
|
||||
|
||||
Run `make dvorak` while in the `kinesis_stapelberg` working directory.
|
||||
|
||||
10
keyboards/kinesis/stapelberg/rules.mk
Normal file
10
keyboards/kinesis/stapelberg/rules.mk
Normal file
@ -0,0 +1,10 @@
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
# just silently stop, since we need to upload with teensy uploader
|
||||
upload: build
|
||||
|
||||
|
||||
|
||||
|
||||
28
keyboards/kinesis/stapelberg/stapelberg.c
Normal file
28
keyboards/kinesis/stapelberg/stapelberg.c
Normal file
@ -0,0 +1,28 @@
|
||||
#include "stapelberg.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
72
keyboards/kinesis/stapelberg/stapelberg.h
Normal file
72
keyboards/kinesis/stapelberg/stapelberg.h
Normal file
@ -0,0 +1,72 @@
|
||||
#ifndef KINESIS_STAPELBERG_H
|
||||
#define KINESIS_STAPELBERG_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguments as on the physical keyboard
|
||||
// The second converts the arguments into the 2-D scanned array
|
||||
|
||||
#define KEYMAP( \
|
||||
kC0,kD0,kE0,kC1,kD1,kE1,kC2,kD2,kE2, \
|
||||
k00,k10,k20,k30,k40,k50, \
|
||||
k01,k11,k21,k31,k41,k51, \
|
||||
k02,k12,k22,k32,k42,k52, \
|
||||
k03,k13,k23,k33,k43,k53, \
|
||||
k14,k24,k34,k54, \
|
||||
k56,k55, \
|
||||
k35, \
|
||||
k36,k46,k25, \
|
||||
kC3,kD3,kE3,kC4,kD4,kE4,kC5,kE5,kD5, \
|
||||
k60,k70,k80,k90,kA0,kB0, \
|
||||
k61,k71,k81,k91,kA1,kB1, \
|
||||
k62,k72,k82,k92,kA2,kB2, \
|
||||
k63,k73,k83,k93,kA3,kB3, \
|
||||
k64,k84,k94,kA4, \
|
||||
k96,k85, \
|
||||
k86, \
|
||||
k66,k75,k65 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k10, k11, k12, k13, k14, KC_NO, KC_NO }, \
|
||||
{ k20, k21, k22, k23, k24, k25, KC_NO }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36 }, \
|
||||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56 }, \
|
||||
{ k60, k61, k62, k63, k64, k65, k66 }, \
|
||||
{ k70, k71, k72, k73, KC_NO, k75, KC_NO }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86 }, \
|
||||
{ k90, k91, k92, k93, k94, KC_NO, k96 }, \
|
||||
{ kA0, kA1, kA2, kA3, kA4, KC_NO, KC_NO }, \
|
||||
{ kB0, kB1, kB2, kB3, KC_NO, KC_NO, KC_NO }, \
|
||||
{ kC0, kC1, kC2, kC3, kC4, kC5, KC_NO }, \
|
||||
{ kD0, kD1, kD2, kD3, kD4, kD5, KC_NO }, \
|
||||
{ kE0, kE1, kE2, kE3, kE4, kE5, KC_NO } \
|
||||
}
|
||||
|
||||
/*
|
||||
This is the Stapelberg matrix as published at
|
||||
https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec
|
||||
Along with the pins for each row and column
|
||||
PB0 PB1 PB2 PB3 PB4 PB5 PB6
|
||||
kx0 kx1 kx2 kx3 kx4 kx5 kx6
|
||||
PD0 k0x Row: EQL TAB CAP LSH X2 -- --
|
||||
PD1 k1x Row: 1 Q A Z BQ -- --
|
||||
PD2 k2x Row: 2 W S X INS END --
|
||||
PD3 k3x Row: 3 E D C LFT HOM BAK
|
||||
PD4 k4x Row: 4 R F V -- -- DEL
|
||||
PD5 k5x Row: 5 T G B RT LAL LCT
|
||||
PD6 k6x Row: 6 Y H N UP SPC PGD
|
||||
PD7 k7x Row: 7 U J M -- RET --
|
||||
PB0 k8x Row: 8 I K COM DWN RCT PGU
|
||||
PB1 k9x Row: 9 O L PER LBR -- RAL
|
||||
PB2 kAx Row: 0 P SEM SLA RBR -- --
|
||||
PB3 kBx Row: MIN BSL APO RSH X1 -- --
|
||||
PB4 kCx Row: ESC F3 F6 F9 F12 PAU --
|
||||
PB5 kDx Row: F1 F4 F7 F10 PRT PRG --
|
||||
PB6 kEx Row: F2 F5 F8 F11 SLK KEY --
|
||||
*/
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user