From e01b2d518a1a08ce07278ef9a38c7a793c843749 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Mon, 6 May 2019 17:06:43 -0500 Subject: [PATCH] [Keyboard] Sol keyboard conversion to split common (#5773) * Split common conversion * Updated serial and encoder pins * Fixing default folder until r2 * Fixing oled driver on slave split common * Fixing keymap compile errors * Fixing oled inactivity timer on slave split common * Hoisted oled driver task, init, & activity to keyboard.c * Update keyboards/sol/config.h Co-Authored-By: XScorpion2 * Remove TAPPING_FORCE_HOLD --- keyboards/sol/common/knob_v2.c | 71 ----- keyboards/sol/common/knob_v2.h | 28 -- keyboards/sol/config.h | 70 +++++ keyboards/sol/keymaps/brianweyer/keymap.c | 36 ++- keyboards/sol/keymaps/brianweyer/rules.mk | 6 - keyboards/sol/keymaps/danielhklein/keymap.c | 28 +- keyboards/sol/keymaps/danielhklein/rules.mk | 6 - keyboards/sol/keymaps/default/keymap.c | 28 +- keyboards/sol/keymaps/default/rules.mk | 6 - keyboards/sol/keymaps/kageurufu/keymap.c | 26 +- keyboards/sol/keymaps/kageurufu/rules.mk | 6 - keyboards/sol/keymaps/xulkal/keymap.c | 12 +- keyboards/sol/keymaps/xulkal/rules.mk | 7 +- keyboards/sol/rev1/config.h | 111 +------ keyboards/sol/rev1/matrix.c | 304 -------------------- keyboards/sol/rev1/rev1.c | 6 +- keyboards/sol/rev1/rev1.h | 71 +---- keyboards/sol/rev1/rules.mk | 2 - keyboards/sol/rev1/split_util.c | 54 ---- keyboards/sol/rev1/split_util.h | 15 - keyboards/sol/rules.mk | 7 +- keyboards/sol/serial.c | 288 ------------------- keyboards/sol/serial.h | 26 -- keyboards/sol/sol.h | 54 +++- quantum/quantum.c | 23 +- quantum/split_common/matrix.c | 2 +- tmk_core/common/keyboard.c | 19 ++ 27 files changed, 250 insertions(+), 1062 deletions(-) delete mode 100644 keyboards/sol/common/knob_v2.c delete mode 100644 keyboards/sol/common/knob_v2.h delete mode 100644 keyboards/sol/rev1/matrix.c delete mode 100644 keyboards/sol/rev1/split_util.c delete mode 100644 keyboards/sol/rev1/split_util.h delete mode 100644 keyboards/sol/serial.c delete mode 100644 keyboards/sol/serial.h diff --git a/keyboards/sol/common/knob_v2.c b/keyboards/sol/common/knob_v2.c deleted file mode 100644 index f22f7c5d8..000000000 --- a/keyboards/sol/common/knob_v2.c +++ /dev/null @@ -1,71 +0,0 @@ -#include "knob_v2.h" - -bool knob_prev_a = false; -static knob_report_t knob_report = {.dir = 0, .phase = 0}; - -void knob_init(void) { - // I use pins D1 (ISR1) & D4 for a knob. - - // Set pin mode for D4 as input. - DDRD &= ~(0UL << ENCODER_PIN_2); - - // Enable internal pull-up for D4. - // This is done by "writing" 1 to a pin that has its mode set to input. - PORTD |= (1 << ENCODER_PIN_2); - - // Enable interrupt for D1 - // For more info on the below flags see this awesome section 11.1 (pages 89-90) here: - // https://cdn-shop.adafruit.com/datasheets/atmel-7766-8-bit-avr-atmega16u4-32u4_datasheet.pdf - // Set pin mode & pull-up. - DDRD &= ~(0UL << ENCODER_PIN_1); - PORTD |= (1UL << ENCODER_PIN_1); - - // INT: 33221100 - EICRA |= 0b00010000; // 0b01 - any edge - // INT: 6 3210 - EIMSK |= 0b00000100; -} - -ISR(ENCODER_INT) { - bool a = PIND & (1 << ENCODER_PIN_1); - - if (knob_prev_a != a) { - // "A" channel has REALLY changed. - knob_report.phase = a; - knob_prev_a = a; - bool b = PIND & (1 << ENCODER_PIN_2); - if (a == b) { - // Halfway through CCW rotation (A == B) - // - // +---YOU ARE HERE (A=1, B=1) - // | +---OR HERE (A=0, B=0) - // | | - // v v - // A: _____/^^^^^\__ - // B: __/^^^^^\_____ - knob_report.dir++; - } else { - // Halfway through CW rotation (A != B) - // - // +---YOU ARE HERE (A=1, B=0) - // | +---OR HERE (A=0, B=1) - // | | - // v v - // A: _____/^^^^^\_____ - // B: ________/^^^^^\__ - knob_report.dir--; - } - } -} - -knob_report_t knob_report_read(void) { - // Return knob report. - return knob_report; -} - -void knob_report_reset(void) { - // Call this ASAP once you've processed the previous knob report. - // TODO: This should probably be called within `knob_report_read`. - knob_report.dir = 0; - knob_report.phase = 0; -} diff --git a/keyboards/sol/common/knob_v2.h b/keyboards/sol/common/knob_v2.h deleted file mode 100644 index 45196eb1a..000000000 --- a/keyboards/sol/common/knob_v2.h +++ /dev/null @@ -1,28 +0,0 @@ -// Rotary knob implementation - Version 2. -// Uses 2 digital pins - D2 (via interrupt) & D6. -// #include "rev1.h" -#include -#include -#include - -#ifndef ENCODER_PIN_1 - #define ENCODER_PIN_1 PD2 -#endif -#ifndef ENCODER_PIN_2 - #define ENCODER_PIN_2 PD6 -#endif -#ifndef ENCODER_INT - #define ENCODER_INT INT2_vect -#endif - -typedef struct knob_report_t { - int8_t dir; // Contains number of rotations that happened - int8_t phase; // Contains 0 if last rotation happened on 90 degrees, 1 if on 270 -} knob_report_t; - -void knob_init(void); -knob_report_t knob_report_read(void); -void knob_report_reset(void); - -bool knob_prev_a; -int8_t knob_dir; diff --git a/keyboards/sol/config.h b/keyboards/sol/config.h index 93fd2261b..a7317d9d9 100644 --- a/keyboards/sol/config.h +++ b/keyboards/sol/config.h @@ -20,3 +20,73 @@ along with this program. If not, see . #include "config_common.h" +#define TAPPING_TERM 150 + +/* Select hand configuration */ +#define SOFT_SERIAL_PIN D3 +#define EE_HANDS + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 12 +#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6} + +// wiring of each half +#define MATRIX_COLS 7 +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 } + +// Encoder support +#define NUMBER_OF_ENCODERS 1 +#define ENCODERS_PAD_A { D2 } +#define ENCODERS_PAD_B { D6 } + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN B3 + +#ifdef IOS_DEVICE_ENABLE + #define RGBLIGHT_LIMIT_VAL 40 +#elif RGBLIGHT_FULL_POWER + #define RGBLIGHT_LIMIT_VAL 255 +#else + #define RGBLIGHT_LIMIT_VAL 120 +#endif +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL + +#define LED_HITS_TO_REMEMBER 5 + +#define RGBLIGHT_ANIMATIONS + +#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) +// USB_MAX_POWER_CONSUMPTION value for Helix keyboard +// 120 RGBoff, OLEDoff +// 120 OLED +// 330 RGB 6 +// 300 RGB 32 +// 310 OLED & RGB 32 + #define USB_MAX_POWER_CONSUMPTION 500 +#else + // fix iPhone and iPad power adapter issue + // iOS device need lessthan 100 + #define USB_MAX_POWER_CONSUMPTION 100 +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/sol/keymaps/brianweyer/keymap.c b/keyboards/sol/keymaps/brianweyer/keymap.c index 87d603d81..3ba52081d 100755 --- a/keyboards/sol/keymaps/brianweyer/keymap.c +++ b/keyboards/sol/keymaps/brianweyer/keymap.c @@ -11,8 +11,6 @@ extern keymap_config_t keymap_config; extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -59,8 +57,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| LCTL, LALT, FN, LGUI, RGB_MOD, SPC, DEL, BSPC, SPC, ADJ, LGUI, FN, LALT, LCTL, //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------| - VOLD, VOLU, SPC, ENT, ENT, SPC, DOWN, UP - // Rotary Left |--------+--------| |--------+-----------+ Rotary Right + SPC, ENT, ENT, SPC + // |--------+--------| |--------+-----------+ ), /* FN @@ -90,8 +88,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------| - VOLD, VOLU, _______, _______, _______, _______, UP, DOWN - // Rotary Left |--------+--------| |--------+-----------+ Rotary Right + _______, _______, _______, _______ + // |--------+--------| |--------+-----------+ ), /* ADJ @@ -122,8 +120,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--------+--+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______ \ - // Rotary Left |--------+--------| |--------+--------+ Rotary Right + _______, _______, _______, _______ \ + // |--------+--------| |--------+--------+ ) }; @@ -132,6 +130,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool TOG_STATUS = false; int RGB_current_mode; +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder*/ + if (clockwise) { + tap_code(KC_UP); + } else { + tap_code(KC_DOWN); + } + } +} +#endif + bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { @@ -182,7 +198,7 @@ void matrix_init_user(void) { #ifdef OLED_DRIVER_ENABLE oled_rotation_t oled_init_user(oled_rotation_t rotation) { - if (!has_usb()) + if (!is_keyboard_master()) return OLED_ROTATION_180; // flip 180 for offhand return rotation; } @@ -244,7 +260,7 @@ static void render_status(void) { } void oled_task_user(void) { - if (is_master) + if (is_keyboard_master()) render_status(); else render_logo(); diff --git a/keyboards/sol/keymaps/brianweyer/rules.mk b/keyboards/sol/keymaps/brianweyer/rules.mk index 15b0c8fd2..12c877946 100755 --- a/keyboards/sol/keymaps/brianweyer/rules.mk +++ b/keyboards/sol/keymaps/brianweyer/rules.mk @@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000) IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) # Do not edit past here -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c -endif - ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) OPT_DEFS += -DIOS_DEVICE_ENABLE else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) diff --git a/keyboards/sol/keymaps/danielhklein/keymap.c b/keyboards/sol/keymaps/danielhklein/keymap.c index 9bcc5761a..860361e81 100644 --- a/keyboards/sol/keymaps/danielhklein/keymap.c +++ b/keyboards/sol/keymaps/danielhklein/keymap.c @@ -11,8 +11,6 @@ extern keymap_config_t keymap_config; extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -64,7 +62,7 @@ LAYOUT( \ KC_CAPS, _10, _11, _12, _13, _14, KC_LCBR, KC_RCBR, _15, _16, _17, _18, _19, KC_QUOT, \ KC_LSFT, _20, _21, _22, _23, _24, KC_GRV, KC_BSLS, _25, _26, _27, _28, _29, KC_RSFT, \ KC_LEFT, KC_DOWN, KC_LCTRL, KC_LALT, KC_LGUI, KC_BSPC, FN, ADJ, KC_SPC, KC_RGUI, KC_RALT, KC_RCTRL, KC_UP, KC_RIGHT, \ - KC_VOLU, KC_VOLD, KC_BSPC, FN, ADJ, KC_SPC, KC_VOLU, KC_VOLD \ + KC_BSPC, FN, ADJ, KC_SPC \ ) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -132,7 +130,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + XXXXXXX, _______, XXXXXXX, XXXXXXX \ ), /* ADJ @@ -157,7 +155,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, RGB_SAD, RGB_VAI, RGB_SAI, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PENT, XXXXXXX, XXXXXXX, \ XXXXXXX, RGB_HUD, RGB_VAD, RGB_HUI, XXXXXXX, XXXXXXX, QWERTY, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_SPC, XXXXXXX, XXXXXXX, \ XXXXXXX, RGBRST, RGB_TOG, RGB_MOD, RGB_RMOD, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_P0, KC_PDOT, KC_BSPC, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX \ + XXXXXXX, XXXXXXX, _______, XXXXXXX \ ) }; @@ -165,6 +163,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool TOG_STATUS = false; int RGB_current_mode; +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder*/ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} +#endif + // Setting ADJ layer RGB back to default void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { @@ -308,7 +324,7 @@ static void render_status(void) { } void oled_task_user(void) { - if (is_master) + if (is_keyboard_master()) render_status(); else render_logo(); diff --git a/keyboards/sol/keymaps/danielhklein/rules.mk b/keyboards/sol/keymaps/danielhklein/rules.mk index 526b72fe7..09b0e201d 100644 --- a/keyboards/sol/keymaps/danielhklein/rules.mk +++ b/keyboards/sol/keymaps/danielhklein/rules.mk @@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000) IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) # Do not edit past here -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c -endif - ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) OPT_DEFS += -DIOS_DEVICE_ENABLE else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) diff --git a/keyboards/sol/keymaps/default/keymap.c b/keyboards/sol/keymaps/default/keymap.c index a40bc40b7..c101a9bd8 100644 --- a/keyboards/sol/keymaps/default/keymap.c +++ b/keyboards/sol/keymaps/default/keymap.c @@ -12,8 +12,6 @@ extern keymap_config_t keymap_config; extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -70,7 +68,7 @@ LAYOUT( \ FN_CAPS, _10, _11, _12, _13, _14, KC_LPRN, KC_RPRN, _15, _16, _17, _18, _19, KC_QUOT, \ KC_LSFT, _20, _21, _22, _23, _24, KC_LCBR, KC_RCBR, _25, _26, _27, _28, _29, KC_ENT, \ KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJ, KC_SPC, KC_DEL, KC_ENT, KC_SPC, FN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, \ - KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \ + KC_SPC, KC_DEL, KC_ENT, KC_SPC \ ) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -138,7 +136,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \ - KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \ + _______, _______, _______, _______ \ ), /* ADJ @@ -163,7 +161,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \ - KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \ + _______, _______, _______, _______ \ ) }; @@ -173,6 +171,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool TOG_STATUS = false; int RGB_current_mode; +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder*/ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} +#endif + // Setting ADJ layer RGB back to default void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { @@ -316,7 +332,7 @@ static void render_status(void) { } void oled_task_user(void) { - if (is_master) + if (is_keyboard_master()) render_status(); else render_logo(); diff --git a/keyboards/sol/keymaps/default/rules.mk b/keyboards/sol/keymaps/default/rules.mk index 526b72fe7..09b0e201d 100644 --- a/keyboards/sol/keymaps/default/rules.mk +++ b/keyboards/sol/keymaps/default/rules.mk @@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000) IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) # Do not edit past here -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c -endif - ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) OPT_DEFS += -DIOS_DEVICE_ENABLE else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) diff --git a/keyboards/sol/keymaps/kageurufu/keymap.c b/keyboards/sol/keymaps/kageurufu/keymap.c index 9ea89db05..b587ef2b3 100644 --- a/keyboards/sol/keymaps/kageurufu/keymap.c +++ b/keyboards/sol/keymaps/kageurufu/keymap.c @@ -35,7 +35,7 @@ EXPAND_LAYOUT( \ FN_ESC, _10, _11, _12, _13, _14, RGB_SAI, RGB_VAI, _15, _16, _17, _18, _19, KC_QUOT, \ KC_LSPO, _20, _21, _22, _23, _24, RGB_SAD, RGB_VAD, _25, _26, _27, _28, _29, KC_RSPC, \ KC_LCTL, KC_LGUI, KC_LGUI, KC_LALT, FN, KC_SPC, FN, FN, KC_SPC, KC_MINS, KC_EQL, KC_DOWN, KC_PGUP, KC_PGDN, \ - KC_VOLD, KC_VOLU, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, KC_VOLD, KC_VOLU \ + KC_SPC, KC_BSPC, KC_ENT, KC_SPC \ ) #define BASE_LAYOUT(...) _BASE_LAYOUT(__VA_ARGS__) @@ -65,15 +65,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ________________FUNCTION_L3________________, _______, _______, ________________FUNCTION_R3________________, \ ________________FUNCTION_L4________________, _______, _______, ________________FUNCTION_R4________________, \ ________________FUNCTION_L5________________, ADJ, ADJ, ________________FUNCTION_R5________________, \ - KC_VOLD, KC_VOLU, _______, KC_DEL, _______, _______, KC_VOLD, KC_VOLU \ + _______, KC_DEL, _______, _______ \ ), - [_ADJ] = EXPAND_LAYOUT( \ + [_ADJ] = EXPAND_LAYOUT( \ _________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, \ _________________ADJUST_L2_________________, _______, _______, _________________ADJUST_R2_________________, \ _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \ _________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \ _________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \ - KC_VOLD, KC_VOLU, _______, _______, _______, _______, KC_VOLD, KC_VOLU \ + _______, _______, _______, _______ \ ) }; + +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder*/ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} +#endif diff --git a/keyboards/sol/keymaps/kageurufu/rules.mk b/keyboards/sol/keymaps/kageurufu/rules.mk index 82816f960..21dca0b11 100644 --- a/keyboards/sol/keymaps/kageurufu/rules.mk +++ b/keyboards/sol/keymaps/kageurufu/rules.mk @@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000) IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) # Do not edit past here -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c -endif - ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) OPT_DEFS += -DIOS_DEVICE_ENABLE else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) diff --git a/keyboards/sol/keymaps/xulkal/keymap.c b/keyboards/sol/keymaps/xulkal/keymap.c index 4591034d2..111e8aa32 100644 --- a/keyboards/sol/keymaps/xulkal/keymap.c +++ b/keyboards/sol/keymaps/xulkal/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _________________QWERTY_L3_________________, KC_GRV, KC_QUOT, _________________QWERTY_R3_________________, \ _________________QWERTY_L4_________________, RGB_TOG, RGBRST, _________________QWERTY_R4_________________, \ _________________QWERTY_L5_________________, RGB_RMOD, RGB_MOD, _________________QWERTY_R5_________________, \ - KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \ + KC_SPC, KC_DEL, KC_ENT, KC_SPC \ ), #ifndef GAMELAYER_DISABLE @@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ___________________GAME_L3_________________, KC_GRV, KC_QUOT, ___________________GAME_R3_________________, \ ___________________GAME_L4_________________, RGB_TOG, RGBRST, ___________________GAME_R4_________________, \ ___________________GAME_L5_________________, RGB_RMOD, RGB_MOD, ___________________GAME_R5_________________, \ - KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \ + KC_SPC, KC_DEL, KC_ENT, KC_SPC \ ), #endif @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { __________________LOWER_L3_________________, _______, _______, __________________LOWER_R3_________________, \ __________________LOWER_L4_________________, _______, _______, __________________LOWER_R4_________________, \ __________________LOWER_L5_________________, _______, _______, __________________LOWER_R5_________________, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ + _______, _______, _______, _______ \ ), [_RAISE] = EXPAND_LAYOUT( \ @@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { __________________RAISE_L3_________________, _______, _______, __________________RAISE_R3_________________, \ __________________RAISE_L4_________________, _______, _______, __________________RAISE_R4_________________, \ __________________RAISE_L5_________________, _______, _______, __________________RAISE_R5_________________, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ + _______, _______, _______, _______ \ ), #ifdef TRILAYER_ENABLED @@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \ _________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \ _________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ + _______, _______, _______, _______ \ ), #endif }; @@ -158,7 +158,7 @@ static void render_status(void) { } void oled_task_user(void) { - if (has_usb()) { + if (is_keyboard_master()) { render_status(); } else { render_logo(); diff --git a/keyboards/sol/keymaps/xulkal/rules.mk b/keyboards/sol/keymaps/xulkal/rules.mk index 685b8ced9..c3ed98edb 100644 --- a/keyboards/sol/keymaps/xulkal/rules.mk +++ b/keyboards/sol/keymaps/xulkal/rules.mk @@ -16,17 +16,12 @@ RGB_MATRIX_KEYPRESSES = yes # Enable reactive per-key effects. Can be very l RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = no # Enable rotary encoder (+90) OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000) +ENCODER_ENABLE = no # Enable rotary encoder (+90) IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) # Do not edit past here -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c -endif - ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) OPT_DEFS += -DIOS_DEVICE_ENABLE else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) diff --git a/keyboards/sol/rev1/config.h b/keyboards/sol/rev1/config.h index 1d8391f64..056869daa 100644 --- a/keyboards/sol/rev1/config.h +++ b/keyboards/sol/rev1/config.h @@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H +#pragma once /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED @@ -27,117 +26,9 @@ along with this program. If not, see . #define PRODUCT Sol #define DESCRIPTION "An RGB, split, ortho-esque keyboard" -#define PREVENT_STUCK_MODIFIERS -#define TAPPING_FORCE_HOLD -#define TAPPING_TERM 150 - -#define USE_I2C -#define USE_SERIAL -#define USE_SERIAL_PD3 - -/* Select hand configuration */ -#define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -/* Select rows configuration */ -// Rows are 4 or 5 -// #define HELIX_ROWS 5 see ./rules.mk - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6} - -// wiring of each half -#define MATRIX_COLS 7 -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 } -// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGB_DI_PIN B3 -#define RGBLIGHT_TIMER -//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -#define DRIVER_COUNT 1 -// #define RGB_MATRIX_KEYPRESSES -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_LEVELS 5 - #ifdef LED_MIRRORED #define RGBLED_NUM 35 #else #define RGBLED_NUM 70 #endif #define DRIVER_LED_TOTAL RGBLED_NUM - -#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950 - -#ifdef IOS_DEVICE_ENABLE - #define RGBLIGHT_LIMIT_VAL 40 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 40 -#elif RGBLIGHT_FULL_POWER - #define RGBLIGHT_LIMIT_VAL 255 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 -#else - #define RGBLIGHT_LIMIT_VAL 120 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 -#endif - -#define RGBLIGHT_VAL_STEP (RGBLIGHT_LIMIT_VAL / 10) -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#define RGBLIGHT_ANIMATIONS - -#define LED_HITS_TO_REMEMBER 5 - -#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) -// USB_MAX_POWER_CONSUMPTION value for Helix keyboard -// 120 RGBoff, OLEDoff -// 120 OLED -// 330 RGB 6 -// 300 RGB 32 -// 310 OLED & RGB 32 - #define USB_MAX_POWER_CONSUMPTION 500 -#else - // fix iPhone and iPad power adapter issue - // iOS device need lessthan 100 - #define USB_MAX_POWER_CONSUMPTION 100 -#endif - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/sol/rev1/matrix.c b/keyboards/sol/rev1/matrix.c deleted file mode 100644 index 804d8b980..000000000 --- a/keyboards/sol/rev1/matrix.c +++ /dev/null @@ -1,304 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include - -#include "serial.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#ifdef ENCODER_ENABLE_CUSTOM - #include "common/knob_v2.h" -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - #ifdef ENCODER_ENABLE_CUSTOM - knob_init(); //FOR ENCODER - #endif - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - #ifdef ENCODER_ENABLE_CUSTOM - knob_report_t knob_report = knob_report_read(); - - knob_report_reset(); - - matrix[5 + offset] &= 0b11111100; - if (knob_report.phase) { // I check for phase to avoid handling the rotation twice (on 90 and 270 degrees). - if (knob_report.dir > 0) { - matrix[5 + offset] |= 0b00000001; - } else if (knob_report.dir < 0) { - matrix[5 + offset] |= 0b00000010; - } - } - #endif - - return 1; -} - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - int ret=serial_update_buffers(); - if (ret ) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} - -uint8_t matrix_scan(void) -{ - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } - - if( serial_transaction() ) { - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/sol/rev1/rev1.c b/keyboards/sol/rev1/rev1.c index b668b02e9..23896860e 100644 --- a/keyboards/sol/rev1/rev1.c +++ b/keyboards/sol/rev1/rev1.c @@ -1,4 +1,4 @@ -#include "sol.h" +#include "quantum.h" #ifdef RGB_MATRIX_ENABLE rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { @@ -81,7 +81,3 @@ }; #endif -void matrix_init_kb(void) { - matrix_init_user(); -}; - diff --git a/keyboards/sol/rev1/rev1.h b/keyboards/sol/rev1/rev1.h index 27b5ac896..6f70f09be 100644 --- a/keyboards/sol/rev1/rev1.h +++ b/keyboards/sol/rev1/rev1.h @@ -1,70 +1 @@ -#ifndef REV1_H -#define REV1_H - -#include "sol.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -//rgb led driver -#include "ws2812.h" -#endif - -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - -//void promicro_bootloader_jmp(bool program); -// LEL/LER/REL/RER are -// LeftEncoderLeft, LeftEncoderRight, RightEncoderLeft, and RightEncoderRight - -#define LAYOUT( \ - L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ - L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ - LEL, LER, L55, L56, R56, R50, REL, RER \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05, L06 }, \ - { L10, L11, L12, L13, L14, L15, L16 }, \ - { L20, L21, L22, L23, L24, L25, L26 }, \ - { L30, L31, L32, L33, L34, L35, L36 }, \ - { L40, L41, L42, L43, L44, L45, L46 }, \ - { LEL, LER, KC_NO, KC_NO, KC_NO, L55, L56 }, \ - { R05, R04, R03, R02, R01, R00, R06 }, \ - { R15, R14, R13, R12, R11, R10, R16 }, \ - { R25, R24, R23, R22, R21, R20, R26 }, \ - { R35, R34, R33, R32, R31, R30, R36 }, \ - { R45, R44, R43, R42, R41, R40, R46 }, \ - { REL, RER, KC_NO, KC_NO, KC_NO, R50, R56 } \ - } - -#define KC________ KC_TRNS -#define KC_RGB_MOD RGB_MOD -#define KC_FN FN -#define KC_ADJ ADJ -#define LAYOUT_kc( \ - L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ - L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ - LEL, LER, L55, L56, R56, R50, REL, RER \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \ - KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \ - KC_##LEL, KC_##LER, KC_##L55, KC_##L56, KC_##R56, KC_##R50, KC_##REL, KC_##RER \ - ) - -#endif +#pragma once diff --git a/keyboards/sol/rev1/rules.mk b/keyboards/sol/rev1/rules.mk index 99f4dd896..e69de29bb 100644 --- a/keyboards/sol/rev1/rules.mk +++ b/keyboards/sol/rev1/rules.mk @@ -1,2 +0,0 @@ -SRC += rev1/matrix.c \ - rev1/split_util.c diff --git a/keyboards/sol/rev1/split_util.c b/keyboards/sol/rev1/split_util.c deleted file mode 100644 index c645bbdfe..000000000 --- a/keyboards/sol/rev1/split_util.c +++ /dev/null @@ -1,54 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "serial.h" - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - #if defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - serial_master_init(); -} - -static void keyboard_slave_setup(void) { - serial_slave_init(); -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1< -#include "eeconfig.h" - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -#endif diff --git a/keyboards/sol/rules.mk b/keyboards/sol/rules.mk index bafdd9c52..b7d689c03 100644 --- a/keyboards/sol/rules.mk +++ b/keyboards/sol/rules.mk @@ -1,5 +1,3 @@ -SRC += serial.c - # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -48,6 +46,9 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Custom local font file OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\" +SPLIT_KEYBOARD = yes +ENCODER_ENABLE = yes + # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -62,6 +63,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -CUSTOM_MATRIX = yes - DEFAULT_FOLDER = sol/rev1 diff --git a/keyboards/sol/serial.c b/keyboards/sol/serial.c deleted file mode 100644 index 169b4b176..000000000 --- a/keyboards/sol/serial.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include "serial.h" - -#ifdef USE_SERIAL - -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// Serial pulse period in microseconds. -#define SELECT_SERIAL_SPEED 1 -#if SELECT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #define READ_WRITE_START_ADJUST 23 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 50 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#else -#error Illegal Serial Speed -#endif - - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH 1 -#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input_with_pullup(); - - -// Enable INT3 -EIMSK |= _BV(INT3); -// Trigger on falling edge of INT3 -EICRA &= ~(_BV(ISC30) | _BV(ISC31)); - -} - -// Used by the sender to synchronize timing with the reciver. -static -void sync_recv(void) { - for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - _delay_sub_us(READ_WRITE_START_ADJUST); - for ( uint8_t i = 0; i < 8; ++i) { - serial_delay_half1(); // read the middle of pulses - byte = (byte << 1) | serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 1<<7; - while( b ) { - if(data & b) { - serial_high(); - } else { - serial_low(); - } - b >>= 1; - serial_delay(); - } - serial_low(); // sync_send() / senc_recv() need raise edge -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - serial_output(); - - // slave send phase - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_slave_buffer[i]); - checksum += serial_slave_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // slave switch to input - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 - - // slave recive phase - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_master_buffer[i] = serial_read_byte(); - checksum_computed += serial_master_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } - - sync_recv(); //weit master output to high -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH); - - // wait for the slaves response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - sei(); - return 1; - } - - // master recive phase - // if the slave is present syncronize with it - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_slave_buffer[i] = serial_read_byte(); - checksum_computed += serial_slave_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if (checksum_computed != checksum_received) { - serial_output(); - serial_high(); - sei(); - return 2; - } - - // master switch to output - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); // 3 - serial_delay_half1(); //4 - - // master send phase - uint8_t checksum = 0; - - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_master_buffer[i]); - checksum += serial_master_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // always, release the line when not in use - sync_send(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/sol/serial.h b/keyboards/sol/serial.h deleted file mode 100644 index cd6bcc76b..000000000 --- a/keyboards/sol/serial.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD3) //SErial pin goes here, D0-D3 -#define SERIAL_PIN_INTERRUPT INT3_vect //"INT#" of your serial pin - - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/sol/sol.h b/keyboards/sol/sol.h index 8f451ce56..8a41702df 100644 --- a/keyboards/sol/sol.h +++ b/keyboards/sol/sol.h @@ -1,7 +1,53 @@ -#ifndef SOL_H -#define SOL_H +#pragma once -#include "rev1.h" #include "quantum.h" - +#ifdef KEYBOARD_sol_rev1 +#include "rev1.h" +#elif KEYBOARD_sol_rev2 +#include "rev2.h" #endif + + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ + L55, L56, R56, R50 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05, L06 }, \ + { L10, L11, L12, L13, L14, L15, L16 }, \ + { L20, L21, L22, L23, L24, L25, L26 }, \ + { L30, L31, L32, L33, L34, L35, L36 }, \ + { L40, L41, L42, L43, L44, L45, L46 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, L55, L56 }, \ + { R05, R04, R03, R02, R01, R00, R06 }, \ + { R15, R14, R13, R12, R11, R10, R16 }, \ + { R25, R24, R23, R22, R21, R20, R26 }, \ + { R35, R34, R33, R32, R31, R30, R36 }, \ + { R45, R44, R43, R42, R41, R40, R46 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, R50, R56 } \ + } + +#define KC________ KC_TRNS +#define KC_RGB_MOD RGB_MOD +#define KC_FN FN +#define KC_ADJ ADJ +#define LAYOUT_kc( \ + L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ + L55, L56, R56, R50 \ + ) \ + LAYOUT( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \ + KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \ + KC_##L55, KC_##L56, KC_##R56, KC_##R50 \ + ) diff --git a/quantum/quantum.c b/quantum/quantum.c index fcedf0bc1..d4fa7f2ef 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -247,12 +247,6 @@ bool process_record_quantum(keyrecord_t *record) { preprocess_tap_dance(keycode, record); #endif - #if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT) - // Wake up oled if user is using those fabulous keys! - if (record->event.pressed) - oled_on(); - #endif - if (!( #if defined(KEY_LOCK_ENABLE) // Must run first to be able to mask key_up events. @@ -976,9 +970,6 @@ void matrix_init_quantum() { #ifdef OUTPUT_AUTO_ENABLE set_output(OUTPUT_AUTO); #endif - #ifdef OLED_DRIVER_ENABLE - oled_init(OLED_ROTATION_0); - #endif matrix_init_kb(); } @@ -1015,10 +1006,6 @@ void matrix_scan_quantum() { haptic_task(); #endif - #ifdef OLED_DRIVER_ENABLE - oled_task(); - #endif - matrix_scan_kb(); } #if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS)) @@ -1214,10 +1201,10 @@ void backlight_task(void) { // (which is not possible since the backlight is not wired to PWM pins on the // CPU), we do the LED on/off by oursleves. // The timer is setup to count up to 0xFFFF, and we set the Output Compare -// register to the current 16bits backlight level (after CIE correction). -// This means the CPU will trigger a compare match interrupt when the counter -// reaches the backlight level, where we turn off the LEDs, -// but also an overflow interrupt when the counter rolls back to 0, +// register to the current 16bits backlight level (after CIE correction). +// This means the CPU will trigger a compare match interrupt when the counter +// reaches the backlight level, where we turn off the LEDs, +// but also an overflow interrupt when the counter rolls back to 0, // in which we're going to turn on the LEDs. // The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz. @@ -1229,7 +1216,7 @@ ISR(TIMERx_COMPA_vect) { } // Triggered when the counter reaches the TOP value -// this one triggers at F_CPU/65536 =~ 244 Hz +// this one triggers at F_CPU/65536 =~ 244 Hz ISR(TIMERx_OVF_vect) { #ifdef BACKLIGHT_BREATHING breathing_task(); diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index eb110bd23..3c3daf3d3 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -299,7 +299,7 @@ uint8_t _matrix_scan(void) { debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); - return 1; + return (uint8_t)changed; } uint8_t matrix_scan(void) { diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index 52546866e..85d252548 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -75,6 +75,9 @@ along with this program. If not, see . #ifdef QWIIC_ENABLE # include "qwiic.h" #endif +#ifdef OLED_DRIVER_ENABLE + #include "oled_driver.h" +#endif #ifdef VELOCIKEY_ENABLE #include "velocikey.h" #endif @@ -205,6 +208,9 @@ void keyboard_init(void) { #ifdef QWIIC_ENABLE qwiic_init(); #endif +#ifdef OLED_DRIVER_ENABLE + oled_init(OLED_ROTATION_0); +#endif #ifdef PS2_MOUSE_ENABLE ps2_mouse_init(); #endif @@ -262,7 +268,11 @@ void keyboard_task(void) uint8_t keys_processed = 0; #endif +#if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT) + uint8_t ret = matrix_scan(); +#else matrix_scan(); +#endif if (is_keyboard_master()) { for (uint8_t r = 0; r < MATRIX_ROWS; r++) { @@ -306,6 +316,15 @@ MATRIX_LOOP_END: qwiic_task(); #endif +#ifdef OLED_DRIVER_ENABLE + oled_task(); +#ifndef OLED_DISABLE_TIMEOUT + // Wake up oled if user is using those fabulous keys! + if (ret) + oled_on(); +#endif +#endif + #ifdef MOUSEKEY_ENABLE // mousekey repeat & acceleration mousekey_task();