Add support for LFKeyboard products: LFK78, LFK87 and SMK65
This commit is contained in:
Scott Wilson
Jack Humbert
parent
8b1862330a
commit
c51dfef958
283
keyboards/lfkeyboards/TWIlib.c
Normal file
283
keyboards/lfkeyboards/TWIlib.c
Normal file
@ -0,0 +1,283 @@
|
||||
/*
|
||||
* TWIlib.c
|
||||
*
|
||||
* Created: 6/01/2014 10:41:33 PM
|
||||
* Author: Chris Herring
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include "TWIlib.h"
|
||||
#include "util/delay.h"
|
||||
#include "print.h"
|
||||
|
||||
void TWIInit()
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWIInfo.repStart = 0;
|
||||
// Set pre-scalers (no pre-scaling)
|
||||
TWSR = 0;
|
||||
// Set bit rate
|
||||
TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
|
||||
// Enable TWI and interrupt
|
||||
TWCR = (1 << TWIE) | (1 << TWEN);
|
||||
}
|
||||
|
||||
uint8_t isTWIReady()
|
||||
{
|
||||
if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) )
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
if(TWIInfo.mode == Initializing){
|
||||
switch(TWIInfo.errorCode){
|
||||
case TWI_SUCCESS:
|
||||
case TWI_NO_RELEVANT_INFO:
|
||||
break;
|
||||
case TWI_LOST_ARBIT:
|
||||
case TWI_MT_DATA_NACK:
|
||||
// Some kind of I2C error, reset and re-init
|
||||
xprintf("I2C init error: %d\n", TWIInfo.errorCode);
|
||||
TWCR = (1 << TWINT)|(1 << TWSTO);
|
||||
TWIInit();
|
||||
break;
|
||||
default:
|
||||
xprintf("Other i2c init error: %d\n", TWIInfo.errorCode);
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking)
|
||||
{
|
||||
// Wait until ready
|
||||
while (!isTWIReady()) {_delay_us(1);}
|
||||
// Reset the I2C stuff
|
||||
TWCR = (1 << TWINT)|(1 << TWSTO);
|
||||
TWIInit();
|
||||
// Set repeated start mode
|
||||
TWIInfo.repStart = repStart;
|
||||
// Copy transmit info to global variables
|
||||
TWITransmitBuffer = (uint8_t *)TXdata;
|
||||
TXBuffLen = dataLen;
|
||||
TXBuffIndex = 0;
|
||||
|
||||
// If a repeated start has been sent, then devices are already listening for an address
|
||||
// and another start does not need to be sent.
|
||||
if (TWIInfo.mode == RepeatedStartSent)
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
else // Otherwise, just send the normal start signal to begin transmission.
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWISendStart();
|
||||
}
|
||||
if(blocking){
|
||||
// Wait until ready
|
||||
while (!isTWIReady()){_delay_us(1);}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart)
|
||||
// {
|
||||
// if (dataLen <= TXMAXBUFLEN)
|
||||
// {
|
||||
// // Wait until ready
|
||||
// while (!isTWIReady()) {_delay_us(1);}
|
||||
// // Set repeated start mode
|
||||
// TWIInfo.repStart = repStart;
|
||||
// // Copy data into the transmit buffer
|
||||
// uint8_t *data = (uint8_t *)TXdata;
|
||||
// for (int i = 0; i < dataLen; i++)
|
||||
// {
|
||||
// TWITransmitBuffer[i] = data[i];
|
||||
// }
|
||||
// // Copy transmit info to global variables
|
||||
// TXBuffLen = dataLen;
|
||||
// TXBuffIndex = 0;
|
||||
|
||||
// // If a repeated start has been sent, then devices are already listening for an address
|
||||
// // and another start does not need to be sent.
|
||||
// if (TWIInfo.mode == RepeatedStartSent)
|
||||
// {
|
||||
// TWIInfo.mode = Initializing;
|
||||
// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
// TWISendTransmit(); // Send the data
|
||||
// }
|
||||
// else // Otherwise, just send the normal start signal to begin transmission.
|
||||
// {
|
||||
// TWIInfo.mode = Initializing;
|
||||
// TWISendStart();
|
||||
// }
|
||||
|
||||
// }
|
||||
// else
|
||||
// {
|
||||
// return 1; // return an error if data length is longer than buffer
|
||||
// }
|
||||
// return 0;
|
||||
// }
|
||||
|
||||
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart)
|
||||
{
|
||||
// Check if number of bytes to read can fit in the RXbuffer
|
||||
if (bytesToRead < RXMAXBUFLEN)
|
||||
{
|
||||
// Reset buffer index and set RXBuffLen to the number of bytes to read
|
||||
RXBuffIndex = 0;
|
||||
RXBuffLen = bytesToRead;
|
||||
// Create the one value array for the address to be transmitted
|
||||
uint8_t TXdata[1];
|
||||
// Shift the address and AND a 1 into the read write bit (set to write mode)
|
||||
TXdata[0] = (TWIaddr << 1) | 0x01;
|
||||
// Use the TWITransmitData function to initialize the transfer and address the slave
|
||||
TWITransmitData(TXdata, 1, repStart, 0);
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
ISR (TWI_vect)
|
||||
{
|
||||
switch (TWI_STATUS)
|
||||
{
|
||||
// ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- //
|
||||
case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received
|
||||
// Set mode to Master Transmitter
|
||||
TWIInfo.mode = MasterTransmitter;
|
||||
case TWI_START_SENT: // Start condition has been transmitted
|
||||
case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received
|
||||
if (TXBuffIndex < TXBuffLen) // If there is more data to send
|
||||
{
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
// This transmission is complete however do not release bus yet
|
||||
else if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MASTER RECEIVER ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received
|
||||
// Switch to Master Receiver mode
|
||||
TWIInfo.mode = MasterReceiver;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// This transmission is complete however do not release bus yet
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MT and MR common ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received
|
||||
case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received
|
||||
case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received
|
||||
case TWI_LOST_ARBIT: // Arbitration has been lost
|
||||
// Return error and send stop and set mode to ready
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
case TWI_REP_START_SENT: // Repeated start has been transmitted
|
||||
// Set the mode but DO NOT clear TWINT as the next data is not yet ready
|
||||
TWIInfo.mode = RepeatedStartSent;
|
||||
break;
|
||||
|
||||
// ----\/ ---- SLAVE RECEIVER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- SLAVE TRANSMITTER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- MISCELLANEOUS STATES ----\/ ---- //
|
||||
case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition
|
||||
// Rather, it is there to be manually set between operations
|
||||
break;
|
||||
case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error
|
||||
TWIInfo.errorCode = TWI_ILLEGAL_START_STOP;
|
||||
TWIInfo.mode = Ready;
|
||||
TWISendStop();
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
81
keyboards/lfkeyboards/TWIlib.h
Normal file
81
keyboards/lfkeyboards/TWIlib.h
Normal file
@ -0,0 +1,81 @@
|
||||
/*
|
||||
* TWIlib.h
|
||||
*
|
||||
* Created: 6/01/2014 10:38:42 PM
|
||||
* Author: Chris Herring
|
||||
*/
|
||||
|
||||
|
||||
#ifndef TWILIB_H_
|
||||
#define TWILIB_H_
|
||||
// TWI bit rate
|
||||
#define TWI_FREQ 400000
|
||||
// Get TWI status
|
||||
#define TWI_STATUS (TWSR & 0xF8)
|
||||
// Transmit buffer length
|
||||
#define TXMAXBUFLEN 20
|
||||
// Receive buffer length
|
||||
#define RXMAXBUFLEN 20
|
||||
// Global transmit buffer
|
||||
volatile uint8_t *TWITransmitBuffer;
|
||||
// Global receive buffer
|
||||
volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN];
|
||||
// Buffer indexes
|
||||
volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time.
|
||||
int RXBuffIndex; // Current index in the receive buffer
|
||||
// Buffer lengths
|
||||
int TXBuffLen; // The total length of the transmit buffer
|
||||
int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN)
|
||||
|
||||
typedef enum {
|
||||
Ready,
|
||||
Initializing,
|
||||
RepeatedStartSent,
|
||||
MasterTransmitter,
|
||||
MasterReceiver,
|
||||
SlaceTransmitter,
|
||||
SlaveReciever
|
||||
} TWIMode;
|
||||
|
||||
typedef struct TWIInfoStruct{
|
||||
TWIMode mode;
|
||||
uint8_t errorCode;
|
||||
uint8_t repStart;
|
||||
}TWIInfoStruct;
|
||||
TWIInfoStruct TWIInfo;
|
||||
|
||||
|
||||
// TWI Status Codes
|
||||
#define TWI_START_SENT 0x08 // Start sent
|
||||
#define TWI_REP_START_SENT 0x10 // Repeated Start sent
|
||||
// Master Transmitter Mode
|
||||
#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received
|
||||
#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received
|
||||
#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received
|
||||
#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received
|
||||
// Master Receiver Mode
|
||||
#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received
|
||||
#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received
|
||||
#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned
|
||||
#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned
|
||||
|
||||
// Miscellaneous States
|
||||
#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost
|
||||
#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available
|
||||
#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected
|
||||
#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only
|
||||
|
||||
|
||||
#define TWISendStart() (TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer.
|
||||
#define TWISendStop() (TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag.
|
||||
#define TWISendTransmit() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled.
|
||||
#define TWISendACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte.
|
||||
#define TWISendNACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte.
|
||||
|
||||
// Function declarations
|
||||
void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking);
|
||||
void TWIInit(void);
|
||||
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart);
|
||||
uint8_t isTWIReady(void);
|
||||
|
||||
#endif // TWICOMMS_H_
|
||||
244
keyboards/lfkeyboards/issi.c
Normal file
244
keyboards/lfkeyboards/issi.c
Normal file
@ -0,0 +1,244 @@
|
||||
#ifdef ISSI_ENABLE
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <stdint.h>
|
||||
#include <util/delay.h>
|
||||
#include <avr/sfr_defs.h>
|
||||
#include <avr/io.h>
|
||||
#include <util/twi.h>
|
||||
#include "issi.h"
|
||||
#include "print.h"
|
||||
#include "TWIlib.h"
|
||||
|
||||
#define ISSI_ADDR_DEFAULT 0xE8
|
||||
|
||||
#define ISSI_REG_CONFIG 0x00
|
||||
#define ISSI_REG_CONFIG_PICTUREMODE 0x00
|
||||
#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
|
||||
|
||||
#define ISSI_CONF_PICTUREMODE 0x00
|
||||
#define ISSI_CONF_AUTOFRAMEMODE 0x04
|
||||
#define ISSI_CONF_AUDIOMODE 0x08
|
||||
|
||||
#define ISSI_REG_PICTUREFRAME 0x01
|
||||
|
||||
#define ISSI_REG_SHUTDOWN 0x0A
|
||||
#define ISSI_REG_AUDIOSYNC 0x06
|
||||
|
||||
#define ISSI_COMMANDREGISTER 0xFD
|
||||
#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
|
||||
uint8_t control[8][9] = {
|
||||
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
|
||||
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
|
||||
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
|
||||
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
|
||||
};
|
||||
ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0};
|
||||
|
||||
#ifndef cbi
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#endif
|
||||
|
||||
#ifndef sbi
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#endif
|
||||
|
||||
#define I2C_WRITE 0
|
||||
#define F_SCL 400000UL // SCL frequency
|
||||
#define Prescaler 1
|
||||
#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
|
||||
|
||||
uint8_t i2c_start(uint8_t address)
|
||||
{
|
||||
// reset TWI control register
|
||||
TWCR = 0;
|
||||
// transmit START condition
|
||||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
// check if the start condition was successfully transmitted
|
||||
if((TWSR & 0xF8) != TW_START){ return 1; }
|
||||
|
||||
// load slave address into data register
|
||||
TWDR = address;
|
||||
// start transmission of address
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
// check if the device has acknowledged the READ / WRITE mode
|
||||
uint8_t twst = TW_STATUS & 0xF8;
|
||||
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_write(uint8_t data)
|
||||
{
|
||||
// load data into data register
|
||||
TWDR = data;
|
||||
// start transmission of data
|
||||
TWCR = (1 << TWINT) | (1 << TWEN);
|
||||
// wait for end of transmission
|
||||
while (!(TWCR & (1 << TWINT)))
|
||||
;
|
||||
|
||||
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
|
||||
return 1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
|
||||
{
|
||||
TWBR = (uint8_t)TWBR_val;
|
||||
if (i2c_start(address | I2C_WRITE))
|
||||
return 1;
|
||||
for (uint16_t i = 0; i < length; i++) {
|
||||
if (i2c_write(data[i]))
|
||||
return 1;
|
||||
}
|
||||
// transmit STOP condition
|
||||
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
|
||||
return 0;
|
||||
}
|
||||
|
||||
void setFrame(uint8_t device, uint8_t frame)
|
||||
{
|
||||
static uint8_t current_frame = -1;
|
||||
if(current_frame != frame){
|
||||
uint8_t payload[] = {
|
||||
ISSI_ADDR_DEFAULT | device << 1,
|
||||
ISSI_COMMANDREGISTER,
|
||||
frame
|
||||
};
|
||||
TWITransmitData(payload, sizeof(payload), 0, 1);
|
||||
}
|
||||
// static uint8_t current_frame = 0xFF;
|
||||
// if(current_frame == frame){
|
||||
// // return;
|
||||
// }
|
||||
// uint8_t payload[2] = { ISSI_COMMANDREGISTER, frame };
|
||||
// i2c_transmit(ISSI_ADDR_DEFAULT | device << 1, payload, 2);
|
||||
// current_frame = frame;
|
||||
}
|
||||
|
||||
void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data)
|
||||
{
|
||||
// Set the frame
|
||||
setFrame(device, frame);
|
||||
|
||||
// Write to the register
|
||||
uint8_t payload[] = {
|
||||
ISSI_ADDR_DEFAULT | device << 1,
|
||||
reg,
|
||||
data
|
||||
};
|
||||
TWITransmitData(payload, sizeof(payload), 0, 1);
|
||||
}
|
||||
|
||||
void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm)
|
||||
{
|
||||
uint8_t device_addr = (matrix & 0x06) >> 1;
|
||||
ISSIDeviceStruct *device = issi_devices[device_addr];
|
||||
if(device == 0){
|
||||
return;
|
||||
}
|
||||
// xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm);
|
||||
uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0...
|
||||
uint8_t y = cy - 1; // creating them once for less confusion
|
||||
uint8_t control_reg = (y << 1) | (matrix & 0x01);
|
||||
if(pwm == 0){
|
||||
cbi(device->led_ctrl[control_reg], x);
|
||||
cbi(device->led_blink_ctrl[control_reg], x);
|
||||
}else{
|
||||
sbi(device->led_ctrl[control_reg], x);
|
||||
sbi(device->led_blink_ctrl[control_reg], x);
|
||||
}
|
||||
uint8_t pwm_reg = 0;
|
||||
switch(matrix & 0x01){
|
||||
case 0:
|
||||
pwm_reg = 0x00;
|
||||
break;
|
||||
case 1:
|
||||
pwm_reg = 0x08;
|
||||
break;
|
||||
}
|
||||
pwm_reg += (y << 4) + x;
|
||||
device->led_pwm[pwm_reg] = pwm;
|
||||
device->led_dirty = 1;
|
||||
}
|
||||
|
||||
void update_issi(uint8_t device_addr, uint8_t blocking)
|
||||
{
|
||||
// This seems to take about 6ms
|
||||
ISSIDeviceStruct *device = issi_devices[device_addr];
|
||||
if(device != 0){
|
||||
if(device->fn_dirty){
|
||||
device->fn_dirty = 0;
|
||||
setFrame(device_addr, ISSI_BANK_FUNCTIONREG);
|
||||
TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1);
|
||||
}
|
||||
if(device->led_dirty){
|
||||
device->led_dirty = 0;
|
||||
setFrame(device_addr, 0);
|
||||
TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void issi_init(void)
|
||||
{
|
||||
TWIInit();
|
||||
for(uint8_t device_addr = 0; device_addr < 4; device_addr++){
|
||||
// If this device has been previously allocated, free it
|
||||
if(issi_devices[device_addr] != 0){
|
||||
free(issi_devices[device_addr]);
|
||||
}
|
||||
// Try to shutdown the device, if this fails skip this device
|
||||
writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
|
||||
while (!isTWIReady()){_delay_us(1);}
|
||||
if(TWIInfo.errorCode != 0xFF){
|
||||
xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode);
|
||||
continue;
|
||||
}
|
||||
// Allocate the device structure - calloc zeros it for us
|
||||
ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1);
|
||||
issi_devices[device_addr] = device;
|
||||
device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
|
||||
device->fn_register_addr = 0;
|
||||
device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
|
||||
device->led_register_addr = 0;
|
||||
// set dirty bits so that all of the buffered data is written out
|
||||
device->fn_dirty = 1;
|
||||
device->led_dirty = 1;
|
||||
update_issi(device_addr, 1);
|
||||
// Set the function register to picture mode
|
||||
// device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE;
|
||||
writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
|
||||
}
|
||||
|
||||
// Shutdown and set all registers to 0
|
||||
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
|
||||
// for(uint8_t bank = 0; bank <= 7; bank++){
|
||||
// for (uint8_t reg = 0x00; reg <= 0xB3; reg++) {
|
||||
// writeRegister8(device_addr, bank, reg, 0x00);
|
||||
// }
|
||||
// }
|
||||
// for (uint8_t reg = 0; reg <= 0x0C; reg++) {
|
||||
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00);
|
||||
// }
|
||||
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
|
||||
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
|
||||
// picture mode
|
||||
// writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01);
|
||||
|
||||
//Enable blink
|
||||
// writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B);
|
||||
|
||||
//Enable Breath
|
||||
|
||||
}
|
||||
|
||||
#endif
|
||||
40
keyboards/lfkeyboards/issi.h
Normal file
40
keyboards/lfkeyboards/issi.h
Normal file
@ -0,0 +1,40 @@
|
||||
#ifdef ISSI_ENABLE
|
||||
#ifndef ISSI_H
|
||||
#define ISSI_H
|
||||
|
||||
typedef struct ISSIDeviceStruct{
|
||||
uint8_t fn_dirty; // function registers need to be resent
|
||||
uint8_t fn_device_addr;
|
||||
uint8_t fn_register_addr;
|
||||
uint8_t fn_registers[13];
|
||||
uint8_t led_dirty; // LED data has changed and needs to be resent
|
||||
uint8_t led_device_addr;
|
||||
uint8_t led_register_addr;
|
||||
uint8_t led_ctrl[18];
|
||||
uint8_t led_blink_ctrl[18];
|
||||
uint8_t led_pwm[144];
|
||||
}ISSIDeviceStruct;
|
||||
|
||||
extern ISSIDeviceStruct *issi_devices[];
|
||||
|
||||
// Low level commands- 'device' is the 2-bit i2c id.
|
||||
void issi_init(void);
|
||||
void set_shutdown(uint8_t device, uint8_t shutdown);
|
||||
void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data);
|
||||
|
||||
// Higher level, no device is given, but it is calculated from 'matrix'
|
||||
// Each device has 2 blocks, max of 4 devices:
|
||||
// Device | Block = Matrix
|
||||
// 0 A 0
|
||||
// 0 B 1
|
||||
// 1 A 2
|
||||
// 1 B 3
|
||||
// 2 A 4
|
||||
// 2 B 5
|
||||
// 3 A 6
|
||||
// 3 B 7
|
||||
void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm);
|
||||
void update_issi(uint8_t device_addr, uint8_t blocking);
|
||||
|
||||
#endif
|
||||
#endif
|
||||
172
keyboards/lfkeyboards/lfk78/config.h
Normal file
172
keyboards/lfkeyboards/lfk78/config.h
Normal file
@ -0,0 +1,172 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER LFKeyboards
|
||||
#define PRODUCT LFK78
|
||||
#define DESCRIPTION QMK keyboard firmware for LFK78 LFK_REV_STRING
|
||||
|
||||
#ifdef LFK_REV_B
|
||||
/* RevB Matrix config */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 8
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, F0, F1, F4, F5, F6}
|
||||
#define MATRIX_COL_PINS { E6, F7, D2, D3, D4, D5, D6, D7 }
|
||||
#define UNUSED_PINS { C7 }
|
||||
#define RGBLED_NUM 31 // Number of LEDs
|
||||
#else
|
||||
/* RevC/D Matrix config */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 18
|
||||
#define MATRIX_ROW_PINS {D2, D3, D4, D5, D6 }
|
||||
#define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, E6, E7,\
|
||||
F0, F1, F2, F3, C0, C1, C2, C3 }
|
||||
#define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C4, C5, C6, C7,\
|
||||
D0, D1, D7, E0, E1, E2, E3, E4, D5, F4, F5, F6, F7,\
|
||||
E6, E7, F0, F1, F2, F3, C0, C1, C2, C3}
|
||||
#define RGBLED_NUM 27 // Number of LEDs
|
||||
#endif
|
||||
|
||||
#define AUDIO_VOICES
|
||||
#define C6_AUDIO
|
||||
|
||||
#define BACKLIGHT_LEVELS 8
|
||||
#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255}
|
||||
|
||||
#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
8
keyboards/lfkeyboards/lfk78/keymaps/default/config.h
Normal file
8
keyboards/lfkeyboards/lfk78/keymaps/default/config.h
Normal file
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
123
keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c
Normal file
123
keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c
Normal file
@ -0,0 +1,123 @@
|
||||
#include "lfk78.h"
|
||||
#include "issi.h"
|
||||
#include "lighting.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
//Define a shorter 'transparent' key code to make the keymaps more compact
|
||||
#define KC_TR KC_TRNS
|
||||
|
||||
enum keymap_layout {
|
||||
VANILLA = 0, // matches MF68 layout
|
||||
FUNC, // 0x02
|
||||
SETTINGS, // 0x04
|
||||
};
|
||||
|
||||
// Colors of the layer indicator LED
|
||||
// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer
|
||||
const Layer_Info layer_info[] = {
|
||||
// Layer Mask Red Green Blue
|
||||
{0x00000000, 0xFFFFFFFF, {0x0000, 0x0FFF, 0x0000}}, // base layer - green
|
||||
{0x00000002, 0xFFFFFFFE, {0x0000, 0x0000, 0x0FFF}}, // function layer - blue
|
||||
{0x00000004, 0xFFFFFFFC, {0x0FFF, 0x0000, 0x0FFF}}, // settings layer - magenta
|
||||
{0xFFFFFFFF, 0xFFFFFFFF, {0x0FFF, 0x0FFF, 0x0FFF}}, // unknown layer - REQUIRED - white
|
||||
};
|
||||
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[VANILLA] = KEYMAP(
|
||||
/* Keymap VANILLA: (Base Layer) Default Layer
|
||||
* ,---------. ,------------------------------------------------------------. ,---------.
|
||||
* | F1 | F2 | |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| | Ins|PgUp|
|
||||
* |---------| |------------------------------------------------------------| |---------|
|
||||
* | F3 | F4 | |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del|PgDn|
|
||||
* |---------| |------------------------------------------------------------| `---------'
|
||||
* | F5 | F6 | |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
|
||||
* |---------| |------------------------------------------------------------| ,----.
|
||||
* | F7 | F8 | |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up |
|
||||
* |---------| |-------------------------------------------------------------------------.
|
||||
* | F9 | F10| |Ctrl|Win |Alt | Space |Alt |Ctrl|Func | |Lft| Dn |Rig |
|
||||
* `---------' `------------------------------------------------------' `-------------'
|
||||
*/
|
||||
KC_F1, KC_F2, KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_PGUP,
|
||||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN,
|
||||
KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
|
||||
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
/* Keymap FUNCTION: Function Layer
|
||||
* ,---------. ,-------------------------------------------------------------. ,---------.
|
||||
* | | | | ` |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Delete | | Ins|Home|
|
||||
* |---------| |-------------------------------------------------------------| |---------|
|
||||
* | | | |Tab |Hom| Up|End|PgU| | | | | | | | | | | Del|End |
|
||||
* |---------| |-------------------------------------------------------------| `---------'
|
||||
* | | | |MO(FUNC)|Lft|Dn |Rig|PgD| |Lft|Dwn| Up|Rgt| | | |
|
||||
* |---------| |-------------------------------------------------------------| ,----.
|
||||
* | | | |Shift | | | | | | |Mute|V- |V+ | |TG(SETTINGS)| | Up |
|
||||
* |---------| |--------------------------------------------------------------------------.
|
||||
* | | | |Ctrl|Win |Alt | Enter |Alt |Func |CTRL | |Lft| Dn |Rig |
|
||||
* `---------' `------------------------------------------------------' `-------------'
|
||||
*/
|
||||
[FUNC] = KEYMAP(
|
||||
KC_TR, KC_TR, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TR, KC_HOME,
|
||||
KC_TR, KC_TR, KC_NO,KC_HOME, KC_UP, KC_END, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TR, KC_END,
|
||||
KC_TR, KC_TR, KC_TR, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, KC_NO, KC_NO,
|
||||
KC_TR, KC_TR, KC_TR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, TG(SETTINGS), KC_TR,
|
||||
KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_ENT, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR),
|
||||
|
||||
/* Keymap SETTINGS: Settings Layer
|
||||
* ,---------. ,-------------------------------------------------------------. ,-------------.
|
||||
* | | | |LayClr| | | | | | | | | | |BL-|BL+|BL Togl| |RGB Tog |Val+|
|
||||
* |---------| |-------------------------------------------------------------| |-------------|
|
||||
* | | | |MuMode | | | | | | | | | | | | |LEDTst| |RGB Mode|Val-|
|
||||
* |---------| |-------------------------------------------------------------| `-------------'
|
||||
* | | | |AudTgl |Hz+|MS+| | | | | | | | | | RST |
|
||||
* |---------| |-------------------------------------------------------------| ,----.
|
||||
* | | | |ClickTgl |Hz-|MS-| | | | |MuTgl| | | |Layer Clr | |Hue+|
|
||||
* |---------| |-------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | |Sat-|Hue-|Sat+|
|
||||
* `---------' `--------------------------------------------------------' `--------------'
|
||||
*/
|
||||
[SETTINGS] = KEYMAP(
|
||||
KC_NO, KC_NO, KC_FN0,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, BL_INC, BL_TOGG, RGB_TOG, RGB_VAI,
|
||||
KC_NO, KC_NO, MU_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, RGB_VAD,
|
||||
KC_NO, KC_NO, AU_TOG, KC_FN1,KC_FN3, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET,
|
||||
KC_NO, KC_NO, KC_FN5, KC_FN2,KC_FN4, KC_NO, KC_NO, KC_NO, KC_NO, MU_TOG, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_SAD, RGB_HUD, RGB_SAI),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers
|
||||
ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN1 - Increase Freq of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN2 - Decrease Freq of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN3 - Increase length of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN4 - Decrease length of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click
|
||||
};
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
// This keymap only has a single base layer, so reset the default if needed
|
||||
if(eeconfig_read_default_layer() > 1){
|
||||
eeconfig_update_default_layer(1);
|
||||
default_layer_set(1);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
}
|
||||
1
keyboards/lfkeyboards/lfk78/keymaps/default/readme.md
Normal file
1
keyboards/lfkeyboards/lfk78/keymaps/default/readme.md
Normal file
@ -0,0 +1 @@
|
||||
# The default keymap for LFK78
|
||||
42
keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk
Normal file
42
keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk
Normal file
@ -0,0 +1,42 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = yes # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
TAP_DANCE_ENABLE = no
|
||||
|
||||
ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled
|
||||
WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(ISSI_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DISSI_ENABLE
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
|
||||
endif
|
||||
|
||||
# Override the LFK78 hardware version:
|
||||
#
|
||||
# B - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight
|
||||
# C-H - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB
|
||||
# J - at90usb646, C6 audio, ISSI device 0 is backlight, 4 is RGB
|
||||
# LFK_REV = J
|
||||
225
keyboards/lfkeyboards/lfk78/lfk78.c
Normal file
225
keyboards/lfkeyboards/lfk78/lfk78.c
Normal file
@ -0,0 +1,225 @@
|
||||
#include <avr/sfr_defs.h>
|
||||
#include <avr/timer_avr.h>
|
||||
#include <avr/wdt.h>
|
||||
#include "lfk78.h"
|
||||
#include "keymap.h"
|
||||
#include "issi.h"
|
||||
#include "TWIlib.h"
|
||||
#include "lighting.h"
|
||||
#include "debug.h"
|
||||
#include <audio/audio.h>
|
||||
|
||||
uint16_t click_hz = CLICK_HZ;
|
||||
uint16_t click_time = CLICK_MS;
|
||||
uint8_t click_toggle = CLICK_ENABLED;
|
||||
|
||||
void matrix_init_kb(void)
|
||||
{
|
||||
matrix_init_user();
|
||||
|
||||
// Configure the Layer LED
|
||||
// Set up 16 bit PWM: Fast PWM, mode 15, inverted
|
||||
TCCR1A = 0b11111110;
|
||||
TCCR1B = 0b00011001;
|
||||
ICR1 = 0xFFFF;
|
||||
// PWM values - 0xFFFF = off, 0x0000 = max
|
||||
OCR1C = 0x0000; // B7 - Blue
|
||||
OCR1B = 0x0000; // B6 - Green
|
||||
OCR1A = 0x0FFF; // B5 - Red
|
||||
// Set as output
|
||||
DDRB |= 0b11100000;
|
||||
|
||||
#ifndef AUDIO_ENABLE
|
||||
// If we're not using the audio pin, drive it low
|
||||
sbi(DDRC, 6);
|
||||
cbi(PORTC, 6);
|
||||
#endif
|
||||
|
||||
#ifdef ISSI_ENABLE
|
||||
issi_init();
|
||||
#endif
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
// This is done after turning the layer LED red, if we're caught in a loop
|
||||
// we should get a flashing red light
|
||||
wdt_enable(WDTO_500MS);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void)
|
||||
{
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
wdt_reset();
|
||||
#endif
|
||||
#ifdef ISSI_ENABLE
|
||||
// switch/underglow lighting update
|
||||
static uint32_t issi_device = 0;
|
||||
static uint32_t twi_last_ready = 0;
|
||||
if(twi_last_ready > 1000){
|
||||
// Its been way too long since the last ISSI update, reset the I2C bus and start again
|
||||
dprintf("TWI failed to recover, TWI re-init\n");
|
||||
twi_last_ready = 0;
|
||||
TWIInit();
|
||||
force_issi_refresh();
|
||||
}
|
||||
if(isTWIReady()){
|
||||
twi_last_ready = 0;
|
||||
// If the i2c bus is available, kick off the issi update, alternate between devices
|
||||
update_issi(issi_device, issi_device);
|
||||
if(issi_device){
|
||||
issi_device = 0;
|
||||
}else{
|
||||
issi_device = 3;
|
||||
}
|
||||
}else{
|
||||
twi_last_ready++;
|
||||
}
|
||||
#endif
|
||||
// Update layer indicator LED
|
||||
//
|
||||
// Not sure how else to reliably do this... TMK has the 'hook_layer_change'
|
||||
// but can't find QMK equiv
|
||||
static uint32_t layer_indicator = -1;
|
||||
if(layer_indicator != layer_state){
|
||||
for(uint32_t i=0;; i++){
|
||||
// the layer_info list should end with layer 0xFFFFFFFF
|
||||
// it will break this out of the loop and define the unknown layer color
|
||||
if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){
|
||||
OCR1A = layer_info[i].color.red;
|
||||
OCR1B = layer_info[i].color.green;
|
||||
OCR1C = layer_info[i].color.blue;
|
||||
layer_indicator = layer_state;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void click(uint16_t freq, uint16_t duration){
|
||||
#ifdef AUDIO_ENABLE
|
||||
if(freq >= 100 && freq <= 20000 && duration < 100){
|
||||
play_note(freq, 10);
|
||||
for (uint16_t i = 0; i < duration; i++){
|
||||
_delay_ms(1);
|
||||
}
|
||||
stop_all_notes();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record)
|
||||
{
|
||||
if (click_toggle && record->event.pressed){
|
||||
click(click_hz, click_time);
|
||||
}
|
||||
if (keycode == RESET) {
|
||||
reset_keyboard_kb();
|
||||
} else {
|
||||
}
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
int8_t sign = 1;
|
||||
#endif
|
||||
if(id == LFK_ESC_TILDE){
|
||||
// Send ~ on shift-esc
|
||||
void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
|
||||
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
|
||||
if(layer_state == 0){
|
||||
method(shifted ? KC_GRAVE : KC_ESCAPE);
|
||||
}else{
|
||||
method(shifted ? KC_ESCAPE : KC_GRAVE);
|
||||
}
|
||||
send_keyboard_report();
|
||||
}else if(event->event.pressed){
|
||||
switch(id){
|
||||
case LFK_SET_DEFAULT_LAYER:
|
||||
// set/save the current base layer to eeprom, falls through to LFK_CLEAR
|
||||
eeconfig_update_default_layer(1UL << opt);
|
||||
default_layer_set(1UL << opt);
|
||||
case LFK_CLEAR:
|
||||
// Go back to default layer
|
||||
layer_clear();
|
||||
break;
|
||||
#ifdef ISSI_ENABLE
|
||||
case LFK_LED_TEST:
|
||||
led_test();
|
||||
break;
|
||||
#endif
|
||||
#ifdef AUDIO_ENABLE
|
||||
case LFK_CLICK_FREQ_LOWER:
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_FREQ_HIGHER:
|
||||
click_hz += sign * 100;
|
||||
click(click_hz, click_time);
|
||||
break;
|
||||
case LFK_CLICK_TOGGLE:
|
||||
if(click_toggle){
|
||||
click_toggle = 0;
|
||||
click(4000, 100);
|
||||
click(1000, 100);
|
||||
}else{
|
||||
click_toggle = 1;
|
||||
click(1000, 100);
|
||||
click(4000, 100);
|
||||
}
|
||||
break;
|
||||
case LFK_CLICK_TIME_SHORTER:
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_TIME_LONGER:
|
||||
click_time += sign;
|
||||
click(click_hz, click_time);
|
||||
break;
|
||||
#endif
|
||||
case LFK_DEBUG_SETTINGS:
|
||||
dprintf("Click:\n");
|
||||
dprintf(" toggle: %d\n", click_toggle);
|
||||
dprintf(" freq(hz): %d\n", click_hz);
|
||||
dprintf(" duration(ms): %d\n", click_time);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void reset_keyboard_kb(){
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
MCUSR = 0;
|
||||
wdt_disable();
|
||||
wdt_reset();
|
||||
#endif
|
||||
OCR1A = 0x0000; // B5 - Red
|
||||
OCR1B = 0x0FFF; // B6 - Green
|
||||
OCR1C = 0x0FFF; // B7 - Blue
|
||||
reset_keyboard();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led)
|
||||
{
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
// LFK lighting info
|
||||
const uint8_t switch_matrices[] = {0, 1};
|
||||
const uint8_t rgb_matrices[] = {6, 7};
|
||||
const uint8_t rgb_sequence[] = {
|
||||
12, 11, 10, 9, 16, 32, 31, 30, 28, 25, 24, 22, 21,
|
||||
20, 19, 18, 17, 1, 2, 3, 4, 5, 6, 7, 8, 14, 13
|
||||
};
|
||||
// Maps switch LEDs from Row/Col to ISSI matrix.
|
||||
// Value breakdown:
|
||||
// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||||
// / \ ISSI Col | ISSI Row |
|
||||
// matrix idx
|
||||
const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] =
|
||||
KEYMAP(
|
||||
0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91,
|
||||
0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1,
|
||||
0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3,
|
||||
0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2,
|
||||
0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1);
|
||||
155
keyboards/lfkeyboards/lfk78/lfk78.h
Normal file
155
keyboards/lfkeyboards/lfk78/lfk78.h
Normal file
@ -0,0 +1,155 @@
|
||||
#ifndef LFK78_H
|
||||
#define LFK78_H
|
||||
|
||||
/* if the kb.h file exists (because we're running from qmkbuilder) include it */
|
||||
#if __has_include("kb.h")
|
||||
#include "kb.h"
|
||||
#endif
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include <avr/sfr_defs.h>
|
||||
|
||||
#ifndef cbi
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#endif
|
||||
|
||||
#ifndef sbi
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#endif
|
||||
|
||||
|
||||
typedef struct RGB_Color {
|
||||
uint16_t red;
|
||||
uint16_t green;
|
||||
uint16_t blue;
|
||||
} RGB_Color;
|
||||
|
||||
typedef struct Layer_Info {
|
||||
uint32_t layer;
|
||||
uint32_t mask;
|
||||
RGB_Color color;
|
||||
} Layer_Info;
|
||||
|
||||
extern const uint32_t layer_count;
|
||||
extern const Layer_Info layer_info[];
|
||||
|
||||
enum action_functions {
|
||||
LFK_CLEAR = 0, // Resets all layers
|
||||
LFK_ESC_TILDE, // esc+lshift = ~
|
||||
LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom
|
||||
LFK_CLICK_TOGGLE, // Adjusts click duration
|
||||
LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency
|
||||
LFK_CLICK_FREQ_LOWER, // Adjusts click frequency
|
||||
LFK_CLICK_TIME_LONGER, // Adjusts click duration
|
||||
LFK_CLICK_TIME_SHORTER, // Adjusts click duration
|
||||
LFK_DEBUG_SETTINGS, // prints LED and click settings to HID
|
||||
LFK_LED_TEST // cycles through switch and RGB LEDs
|
||||
};
|
||||
|
||||
#define CLICK_HZ 500
|
||||
#define CLICK_MS 2
|
||||
#define CLICK_ENABLED 0
|
||||
|
||||
void reset_keyboard_kb(void);
|
||||
void click(uint16_t freq, uint16_t duration);
|
||||
|
||||
#ifdef LFK_REV_B
|
||||
/* RevB Keymap */
|
||||
// This a shortcut to help you visually see your layout.
|
||||
/*
|
||||
* ,---------. ,-----------------------------------------------------------------------. ,---------.
|
||||
* | 0 | 1 | | 2 | 3 | 4 | 5 | 6 | 7 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | | 94 | 95 |
|
||||
* |---------| |-----------------------------------------------------------------------| |---------|
|
||||
* | 10 | 11 | | 12 | 13 | 14 | 15 | 16 | 17 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | | 96 | 97 |
|
||||
* |---------| |-----------------------------------------------------------------------| `---------'
|
||||
* | 20 | 21 | | 22 | 23 | 24 | 25 | 26 | 27 | 70 | 71 | 72 | 73 | 74 | 75 | 76 |
|
||||
* |---------| |-----------------------------------------------------------------------| ,----.
|
||||
* | 30 | 31 | | 32 | 33 | 34 | 35 | 36 | 37 | 80 | 81 | 82 | 83 | 84 | 85 | | 86 |
|
||||
* |---------| |-------------------------------------------------------------------------------------.
|
||||
* | 40 | 41 | | 42 | 43 | 44 | 45 | 46 | 47 | 90 | | 91 | 92 | 93 |
|
||||
* `---------' `--------------------------------------------------------------------' `--------------'
|
||||
*/
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, k94, k95, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, k96, k97, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, k76, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k90, k91, k92, k93 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56, k57, }, \
|
||||
{ k60, k61, k62, k63, k64, k65, k66, k67, }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, KC_NO,}, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, KC_NO,}, \
|
||||
{ k90, k91, k92, k93, k94, k95, k96, k97, }, \
|
||||
}
|
||||
#else
|
||||
/* RevC/D Keymap */
|
||||
// This a shortcut to help you visually see your layout.
|
||||
/*
|
||||
* ,---------. ,-----------------------------------------------------------------------. ,---------.
|
||||
* | 11 | 12 | | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1F | 1G | | 1H | 1I |
|
||||
* |---------| |-----------------------------------------------------------------------| |---------|
|
||||
* | 21 | 22 | | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2E | 2F | 2G | | 2H | 2I |
|
||||
* |---------| |-----------------------------------------------------------------------| `---------'
|
||||
* | 31 | 32 | | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3D | 3E | 3F |
|
||||
* |---------| |-----------------------------------------------------------------------| ,----.
|
||||
* | 41 | 42 | | 43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4E | 4F | | 4H |
|
||||
* |---------| |-------------------------------------------------------------------------------------.
|
||||
* | 51 | 52 | | 53 | 54 | 55 | 59 | 5D | 5E | 5F | | 5G | 5H | 5I |
|
||||
* `---------' `--------------------------------------------------------------------' `--------------'
|
||||
*/
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \
|
||||
k41, k42, k43, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4H, \
|
||||
k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \
|
||||
) { \
|
||||
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \
|
||||
{k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, KC_NO, k4H, KC_NO}, \
|
||||
{k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \
|
||||
}
|
||||
|
||||
#define SPLIT_SHIFT_KEYMAP( \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \
|
||||
k41, k42, k43, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, \
|
||||
k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \
|
||||
) { \
|
||||
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \
|
||||
{k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, KC_NO}, \
|
||||
{k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \
|
||||
}
|
||||
|
||||
#define ISO_KEYMAP( \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \
|
||||
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4H, \
|
||||
k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \
|
||||
) { \
|
||||
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \
|
||||
{k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, KC_NO, k4H, KC_NO}, \
|
||||
{k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \
|
||||
}
|
||||
|
||||
#endif //LFK_REV_B
|
||||
|
||||
#endif //LFK78_H
|
||||
14
keyboards/lfkeyboards/lfk78/readme.md
Normal file
14
keyboards/lfkeyboards/lfk78/readme.md
Normal file
@ -0,0 +1,14 @@
|
||||
LFK78/68
|
||||
===
|
||||
|
||||
A 65% keyboard similar to the MagicForce68 or VA68M. Optional fuction key block on left side.
|
||||
|
||||
Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
|
||||
Hardware Supported: LFK78/68 RevB - RevJ, SMK78/68
|
||||
Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make lfkeyboards/lfk78:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
34
keyboards/lfkeyboards/lfk78/rules.mk
Normal file
34
keyboards/lfkeyboards/lfk78/rules.mk
Normal file
@ -0,0 +1,34 @@
|
||||
# Set the LFK78 hardware version.
|
||||
#
|
||||
# B - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight
|
||||
# C-H - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB
|
||||
# J - at90usb646, C6 audio, ISSI device 0 is backlight, 4 is RGB
|
||||
LFK_REV = J
|
||||
|
||||
ifeq ($(LFK_REV), B)
|
||||
MCU = atmega32u4
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
else ifeq ($(LFK_REV), J)
|
||||
MCU = at90usb646
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
else
|
||||
MCU = at90usb1286
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=8192
|
||||
endif
|
||||
OPT_DEFS += -DLFK_REV_$(LFK_REV)
|
||||
OPT_DEFS += -DLFK_REV_STRING=\"Rev$(LFK_REV)\"
|
||||
|
||||
# Extra source files for IS3731 lighting
|
||||
SRC = TWIlib.c issi.c lighting.c
|
||||
|
||||
# Processor frequency.
|
||||
F_CPU = 16000000
|
||||
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
173
keyboards/lfkeyboards/lfk87/config.h
Normal file
173
keyboards/lfkeyboards/lfk87/config.h
Normal file
@ -0,0 +1,173 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER LFKeyboards
|
||||
#define PRODUCT LFK87
|
||||
#define DESCRIPTION QMK keyboard firmware for LFK87
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
|
||||
#ifdef LFK_TKL_REV_A
|
||||
/* RevB Matrix config */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 17
|
||||
#define MATRIX_ROW_PINS {D2, D3, D4, D5, D6, D7 }
|
||||
#define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, E6, E7,\
|
||||
F0, F1, F2, F3, C0, C1, C2 }
|
||||
#define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C4, C5, C6, C7,\
|
||||
D0, D1, E0, E1, E2, E3, E4, F4, F5, F6, F7}
|
||||
#define RGBLED_NUM 25 // Number of LEDs
|
||||
#else
|
||||
/* RevC/D Matrix config */
|
||||
#define MATRIX_ROWS 7
|
||||
#define MATRIX_COLS 16
|
||||
#define MATRIX_ROW_PINS {F2, D7, D6, D5, D4, D3, F3}
|
||||
#define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, C7, C1, C0, E1, E0, C2, C3, C4}
|
||||
#define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C5, C6, D2, E3, E4, E5, E6, E7, \
|
||||
F0, F1, F4, F5, F6, F7}
|
||||
#define RGBLED_NUM 24 // Number of LEDs
|
||||
#endif
|
||||
|
||||
#define AUDIO_VOICES
|
||||
#define C6_AUDIO
|
||||
|
||||
#define BACKLIGHT_LEVELS 10
|
||||
#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255}
|
||||
|
||||
#define RGB_DI_PIN F4 // Have to set it to something to get the ws2812 code to compile
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
8
keyboards/lfkeyboards/lfk87/keymaps/default/config.h
Normal file
8
keyboards/lfkeyboards/lfk87/keymaps/default/config.h
Normal file
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
133
keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c
Normal file
133
keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c
Normal file
@ -0,0 +1,133 @@
|
||||
#include "lfk87.h"
|
||||
#include "issi.h"
|
||||
#include "lighting.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
//Define a shorter 'transparent' key code to make the keymaps more compact
|
||||
#define KC_TR KC_TRNS
|
||||
|
||||
enum keymap_layout {
|
||||
VANILLA = 0, // matches MF68 layout
|
||||
FUNC, // 0x08
|
||||
SETTINGS, // 0x10
|
||||
};
|
||||
|
||||
// Colors of the layer indicator LED
|
||||
// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer
|
||||
const Layer_Info layer_info[] = {
|
||||
// Layer Mask Red Green Blue
|
||||
{0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green
|
||||
{0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue
|
||||
{0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta
|
||||
{0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[VANILLA] = KEYMAP(
|
||||
/* Keymap VANILLA: (Base Layer) Default Layer
|
||||
* ,-----------------------------------------------------------------------------.
|
||||
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus|
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp|
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn|
|
||||
* |-----------------------------------------------------------| `--------------'
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
|
||||
* |-----------------------------------------------------------| ,----.
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up |
|
||||
* |-----------------------------------------------------------| ,-------------.
|
||||
* |Ctrl|Gui |Alt | Space |ALT |GUI |Func|CTRL | |Lft| Dn |Rig |
|
||||
* `-----------------------------------------------------------' `-------------'
|
||||
*/
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(FUNC), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
/* Keymap FUNCTION: Function Layer
|
||||
* ,-------------------------------------------------------------. ,--------------.
|
||||
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus|
|
||||
* |-------------------------------------------------------------| |--------------|
|
||||
* | ` |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Delete | | | | |
|
||||
* |-------------------------------------------------------------| |--------------|
|
||||
* |Tab | |PgU| | | | | | Up| | | | | | | | | |
|
||||
* |-------------------------------------------------------------| `--------------'
|
||||
* |Control|Hme|PgD|End| | | |Lft|Dwn|Rgt| | | |
|
||||
* |-------------------------------------------------------------| ,----.
|
||||
* |Shift | |Del| | | | |Mute|V- |V+ | |TG(SETTINGS)| | Up |
|
||||
* |-------------------------------------------------------------' ,-------------.
|
||||
* |Func|Win |Alt | PgD |Alt |Ctrl |Func | |Lft| Dn |Rig |
|
||||
* `------------------------------------------------------' `-------------'
|
||||
*/
|
||||
[FUNC] = KEYMAP(
|
||||
KC_ESC, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_DEL, KC_TR, KC_TR, KC_TR, \
|
||||
KC_NO,KC_NO, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TR, KC_TR, KC_TR, \
|
||||
KC_TR, KC_HOME, KC_PGDN, KC_END, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, \
|
||||
KC_TR, KC_NO, KC_DEL, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, TG(SETTINGS), KC_TR, \
|
||||
KC_TR, KC_TR, KC_TR, KC_PGDN, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR),
|
||||
|
||||
/* Keymap SETTINGS: Settings Layer
|
||||
* ,-----------------------------------------------------------. ,-------------.
|
||||
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus|
|
||||
* |-------------------------------------------------------------| |--------------|
|
||||
* |FN0 | | | | | | | | | | |BL-|BL+|BL Togl| |RGB Tog |Val+|
|
||||
* |-----------------------------------------------------------| |-------------|
|
||||
* |MuMode| | | | | | | | | | | | |LEDTst| |RGB Mode|Val-|
|
||||
* |-----------------------------------------------------------| `-------------'
|
||||
* |AudTgl |Hz+|MS+| | | | | | | | | | RST |
|
||||
* |-----------------------------------------------------------| ,----.
|
||||
* |ClickTgl|Hz-|MS-| | | | | | | | |Layer Clr | |Hue+|
|
||||
* |--------------------------------------------------------------------------.
|
||||
* | | | | | | | | | |Sat-|Hue-|Sat+|
|
||||
* `----------------------------------------------------------------------------'
|
||||
*/
|
||||
[SETTINGS] = KEYMAP(
|
||||
KC_FN0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, KC_NO, KC_NO, KC_NO,
|
||||
KC_FN0,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, BL_INC, BL_TOGG, RGB_TOG, RGB_VAI, KC_NO,
|
||||
MU_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_FN2, RGB_MOD, RGB_VAD, KC_NO,
|
||||
AU_TOG, KC_F1,KC_FN3, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET,
|
||||
KC_FN5, KC_FN2,KC_FN4, KC_NO, KC_NO, KC_NO, KC_NO, MU_TOG, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI,
|
||||
KC_NO, KC_NO, KC_NO, KC_FN12, KC_NO, KC_NO, KC_NO, KC_TR, RGB_SAD, RGB_HUD, RGB_SAI),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers
|
||||
ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN1 - Increase Freq of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN2 - Decrease Freq of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN3 - Increase length of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN4 - Decrease length of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click
|
||||
};
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
// This keymap only has a single base layer, so reset the default if needed
|
||||
if(eeconfig_read_default_layer() > 1){
|
||||
eeconfig_update_default_layer(1);
|
||||
default_layer_set(1);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
54
keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk
Normal file
54
keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk
Normal file
@ -0,0 +1,54 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = yes # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable RGB underlight
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
TAP_DANCE_ENABLE = no
|
||||
|
||||
ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled
|
||||
WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(ISSI_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DISSI_ENABLE
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
|
||||
endif
|
||||
|
||||
|
||||
# Override the LFK87 hardware version.
|
||||
#
|
||||
# A - Green PCB. at90usb1286 Only 3 exist
|
||||
# B - We don't talk about RevB
|
||||
# C-D - Black PCB. at90usb646 First public release
|
||||
#
|
||||
# LFK_REV = C
|
||||
|
||||
# ifeq ($(LFK_REV), A)
|
||||
# MCU = at90usb1286
|
||||
# OPT_DEFS += -DBOOTLOADER_SIZE=8192
|
||||
# else
|
||||
# MCU = at90usb646
|
||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
# endif
|
||||
# OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV)
|
||||
8
keyboards/lfkeyboards/lfk87/keymaps/iso/config.h
Normal file
8
keyboards/lfkeyboards/lfk87/keymaps/iso/config.h
Normal file
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
137
keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c
Normal file
137
keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c
Normal file
@ -0,0 +1,137 @@
|
||||
#include "lfk87.h"
|
||||
#include "issi.h"
|
||||
#include "lighting.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
//Define a shorter 'transparent' key code to make the keymaps more compact
|
||||
#define KC_TR KC_TRNS
|
||||
|
||||
enum keymap_layout {
|
||||
VANILLA = 0,
|
||||
FUNC, // 0x02
|
||||
SETTINGS, // 0x04
|
||||
};
|
||||
|
||||
// Colors of the layer indicator LED
|
||||
// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer
|
||||
const Layer_Info layer_info[] = {
|
||||
// Layer Mask Red Green Blue
|
||||
{0x00000000, 0xFFFFFFFF, {0x00, 0x00, 0x00}}, // base layer - off
|
||||
{0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0x7F}}, // function layer - blue
|
||||
{0x00000004, 0xFFFFFFFC, {0x7F, 0x00, 0x00}}, // settings layer - red
|
||||
{0xFFFFFFFF, 0xFFFFFFFF, {0x0F, 0x0F, 0x0F}}, // unknown layer - REQUIRED - white
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[VANILLA] = ISO_KEYMAP(
|
||||
/* Keymap VANILLA: (Base Layer) Default Layer
|
||||
* ,-----------------------------------------------------------------------------.
|
||||
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus|
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp|
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret| | Del| End|PgDn|
|
||||
* |--------------------------------------------------------. | `--------------'
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '| # | |
|
||||
* |-----------------------------------------------------------| ,----.
|
||||
* |Shft| \ | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up |
|
||||
* |-----------------------------------------------------------| ,-------------.
|
||||
* |Ctrl|Gui |Alt | Space |ALT |GUI | Func|CTRL| |Lft| Dn |Rig |
|
||||
* `-----------------------------------------------------------' `-------------'
|
||||
*/
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_LSCR, KC_PAUS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DELETE, KC_END, KC_PGDN, \
|
||||
KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(FUNC), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
/* Keymap FUNCTION: Function Layer
|
||||
* ,-------------------------------------------------------------. ,--------------.
|
||||
* | |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus|
|
||||
* |-------------------------------------------------------------| |--------------|
|
||||
* | |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Delete | | | | |
|
||||
* |-------------------------------------------------------------| |--------------|
|
||||
* |Tab | |PgU| | | | | | Up| | | | | | | | | | |
|
||||
* |---------------------------------------------------------. | `--------------'
|
||||
* |Control|Hme|PgD|End| | | |Lft|Dwn|Rgt| | | | |
|
||||
* |-------------------------------------------------------------| ,----.
|
||||
* |Shift| | |Del| | | | |Mute|V- |V+ | |TG(SETTINGS)| | Up |
|
||||
* |-------------------------------------------------------------' ,-------------.
|
||||
* |Func|Win |Alt | PgD |ALT |GUI | Func|CTRL| |Lft| Dn |Rig |
|
||||
* `-------------------------------------------------------------' `-------------'
|
||||
*/
|
||||
[FUNC] = ISO_KEYMAP(
|
||||
KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_DEL, KC_TR, KC_TR, KC_TR, \
|
||||
KC_NO,KC_NO, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TR, KC_TR, KC_TR, \
|
||||
KC_TR, KC_HOME, KC_PGDN, KC_END, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, \
|
||||
KC_TR,KC_NO, KC_NO, KC_DEL, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, TG(SETTINGS), KC_TR, \
|
||||
KC_TR, KC_TR, KC_TR, KC_PGDN, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR),
|
||||
|
||||
/* Keymap SETTINGS: Settings Layer
|
||||
* ,-----------------------------------------------------------. ,-------------.
|
||||
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus|
|
||||
* |-------------------------------------------------------------| |--------------|
|
||||
* |FN3 |BL0|BL1|BL2|BL3| | | | | | |BL-|BL+|BL Togl| |RGB Tog |Val+|
|
||||
* |-----------------------------------------------------------| |-------------|
|
||||
* |Debug| | | | | | | | | | | | | RST | |RGB Mode|Val-|
|
||||
* |--------------------------------------------------------. | `-------------'
|
||||
* |LayrClr|Hz+|MS+| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| ,----.
|
||||
* |ClickTgl|Hz-|MS-| | | | | | | | |Layer Clr | |Hue+|
|
||||
* |------------------------------------------------------------------------.
|
||||
* | | | | | | | | |Sat-|Hue-|Sat+|
|
||||
* `------------------------------------------------------' `--------------'
|
||||
*/
|
||||
[SETTINGS] = ISO_KEYMAP(
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, KC_NO, KC_NO, KC_NO,
|
||||
KC_FN0,KC_FN3,KC_FN4,KC_FN5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, BL_INC, BL_TOGG, RGB_TOG, RGB_VAI, KC_NO,
|
||||
MU_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, RGB_MOD, RGB_VAD, KC_NO,
|
||||
AU_TOG, KC_FN3,KC_FN5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_FN7, KC_NO, KC_FN4, KC_FN6, KC_NO, KC_NO, KC_NO, KC_NO, MU_TOG, KC_NO, KC_NO, KC_NO, KC_FN0, RGB_HUI,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_FN0, RGB_SAD, RGB_HUD, RGB_SAI),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers
|
||||
ACTION_FUNCTION(LFK_ESC_TILDE), // FN1 - esc+shift = ~, else escape
|
||||
ACTION_FUNCTION(LFK_LED_TEST), // FN2 - cycle through LEDs for testing
|
||||
ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN3 - Increase Freq of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN4 - Decrease Freq of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN5 - Increase length of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN6 - Decrease length of audio click
|
||||
ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN7 - Toggle audio click
|
||||
ACTION_FUNCTION(LFK_LED_TEST), // FN8 - cycle through LEDs for testing
|
||||
ACTION_FUNCTION(LFK_DEBUG_SETTINGS), // FN9 - prints LED and click settings to HID
|
||||
};
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
// This keymap only has a single base layer, so reset the default if needed
|
||||
if(eeconfig_read_default_layer() > 1){
|
||||
eeconfig_update_default_layer(1);
|
||||
default_layer_set(1);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
53
keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk
Normal file
53
keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk
Normal file
@ -0,0 +1,53 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = yes # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable RGB underlight
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
TAP_DANCE_ENABLE = no
|
||||
|
||||
ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled
|
||||
WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(ISSI_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DISSI_ENABLE
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
|
||||
endif
|
||||
|
||||
|
||||
# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired
|
||||
# #
|
||||
# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight
|
||||
# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB
|
||||
# #
|
||||
# # Set to B, C or D
|
||||
# LFK_REV = D
|
||||
|
||||
# ifeq ($(LFK_REV), B)
|
||||
# MCU = atmega32u4
|
||||
# else
|
||||
# MCU = at90usb1286
|
||||
# endif
|
||||
# OPT_DEFS += -DLFK_REV_$(LFK_REV)
|
||||
# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\"
|
||||
215
keyboards/lfkeyboards/lfk87/lfk87.c
Normal file
215
keyboards/lfkeyboards/lfk87/lfk87.c
Normal file
@ -0,0 +1,215 @@
|
||||
|
||||
#include <avr/sfr_defs.h>
|
||||
#include <avr/timer_avr.h>
|
||||
#include <avr/wdt.h>
|
||||
#include "lfk87.h"
|
||||
#include "keymap.h"
|
||||
#include "issi.h"
|
||||
#include "TWIlib.h"
|
||||
#include "lighting.h"
|
||||
#include "debug.h"
|
||||
#include "quantum.h"
|
||||
|
||||
uint16_t click_hz = CLICK_HZ;
|
||||
uint16_t click_time = CLICK_MS;
|
||||
uint8_t click_toggle = CLICK_ENABLED;
|
||||
|
||||
void matrix_init_kb(void)
|
||||
{
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
set_rgb(31, 0x00, 0x00, 0x00); // Caps lock
|
||||
set_rgb(32, 0xFF, 0x00, 0x00); // Layer indicator, start red
|
||||
#ifndef AUDIO_ENABLE
|
||||
// If we're not using the audio pin, drive it low
|
||||
sbi(DDRC, 6);
|
||||
cbi(PORTC, 6);
|
||||
#endif
|
||||
#ifdef ISSI_ENABLE
|
||||
issi_init();
|
||||
#endif
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
// This is done after turning the layer LED red, if we're caught in a loop
|
||||
// we should get a flashing red light
|
||||
wdt_enable(WDTO_500MS);
|
||||
#endif
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void)
|
||||
{
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
wdt_reset();
|
||||
#endif
|
||||
#ifdef ISSI_ENABLE
|
||||
// switch/underglow lighting update
|
||||
static uint32_t issi_device = 0;
|
||||
static uint32_t twi_last_ready = 0;
|
||||
if(twi_last_ready > 1000){
|
||||
// Its been way too long since the last ISSI update, reset the I2C bus and start again
|
||||
twi_last_ready = 0;
|
||||
TWIInit();
|
||||
force_issi_refresh();
|
||||
}
|
||||
if(isTWIReady()){
|
||||
twi_last_ready = 0;
|
||||
// If the i2c bus is available, kick off the issi update, alternate between devices
|
||||
update_issi(issi_device, issi_device);
|
||||
if(issi_device){
|
||||
issi_device = 0;
|
||||
}else{
|
||||
issi_device = 3;
|
||||
}
|
||||
}else{
|
||||
twi_last_ready++;
|
||||
}
|
||||
#endif
|
||||
// Update layer indicator LED
|
||||
//
|
||||
// Not sure how else to reliably do this... TMK has the 'hook_layer_change'
|
||||
// but can't find QMK equiv
|
||||
static uint32_t layer_indicator = -1;
|
||||
if(layer_indicator != layer_state){
|
||||
for(uint32_t i=0;; i++){
|
||||
// the layer_info list should end with layer 0xFFFF
|
||||
// it will break this out of the loop and define the unknown layer color
|
||||
if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){
|
||||
set_rgb(32, layer_info[i].color.red, layer_info[i].color.green, layer_info[i].color.blue);
|
||||
layer_indicator = layer_state;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void click(uint16_t freq, uint16_t duration){
|
||||
#ifdef AUDIO_ENABLE
|
||||
if(freq >= 100 && freq <= 20000 && duration < 100){
|
||||
play_note(freq, 10);
|
||||
for (uint16_t i = 0; i < duration; i++){
|
||||
_delay_ms(1);
|
||||
}
|
||||
stop_all_notes();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record)
|
||||
{
|
||||
if (click_toggle && record->event.pressed){
|
||||
click(click_hz, click_time);
|
||||
}
|
||||
if (keycode == RESET) {
|
||||
reset_keyboard_kb();
|
||||
} else {
|
||||
}
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
int8_t sign = 1;
|
||||
#endif
|
||||
if(id == LFK_ESC_TILDE){
|
||||
// Send ~ on shift-esc
|
||||
void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
|
||||
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
|
||||
method(shifted ? KC_GRAVE : KC_ESCAPE);
|
||||
send_keyboard_report();
|
||||
}else if(event->event.pressed){
|
||||
switch(id){
|
||||
case LFK_SET_DEFAULT_LAYER:
|
||||
// set/save the current base layer to eeprom, falls through to LFK_CLEAR
|
||||
eeconfig_update_default_layer(1UL << opt);
|
||||
default_layer_set(1UL << opt);
|
||||
case LFK_CLEAR:
|
||||
// Go back to default layer
|
||||
layer_clear();
|
||||
break;
|
||||
#ifdef ISSI_ENABLE
|
||||
case LFK_LED_TEST:
|
||||
led_test();
|
||||
break;
|
||||
#endif
|
||||
#ifdef AUDIO_ENABLE
|
||||
case LFK_CLICK_FREQ_LOWER:
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_FREQ_HIGHER:
|
||||
click_hz += sign * 100;
|
||||
click(click_hz, click_time);
|
||||
break;
|
||||
case LFK_CLICK_TOGGLE:
|
||||
if(click_toggle){
|
||||
click_toggle = 0;
|
||||
click(4000, 100);
|
||||
click(1000, 100);
|
||||
}else{
|
||||
click_toggle = 1;
|
||||
click(1000, 100);
|
||||
click(4000, 100);
|
||||
}
|
||||
break;
|
||||
case LFK_CLICK_TIME_SHORTER:
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_TIME_LONGER:
|
||||
click_time += sign;
|
||||
click(click_hz, click_time);
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void reset_keyboard_kb(){
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
MCUSR = 0;
|
||||
wdt_disable();
|
||||
wdt_reset();
|
||||
#endif
|
||||
set_rgb(31, 0x00, 0xFF, 0xFF);
|
||||
set_rgb(32, 0x00, 0xFF, 0xFF);
|
||||
force_issi_refresh();
|
||||
reset_keyboard();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led)
|
||||
{
|
||||
// Set capslock LED to Blue
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
set_rgb(31, 0x00, 0x00, 0x7F);
|
||||
}else{
|
||||
set_rgb(31, 0x00, 0x00, 0x00);
|
||||
}
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
// Lighting info, see lighting.h for details
|
||||
const uint8_t switch_matrices[] = {0, 1};
|
||||
const uint8_t rgb_matrices[] = {6, 7};
|
||||
|
||||
// RGB Map:
|
||||
// 27 29 10 9 8 7 6
|
||||
// 26 5
|
||||
// 25 4
|
||||
// 24 3
|
||||
// 23 22 21 20 14 15 11 1 2
|
||||
const uint8_t rgb_sequence[] = {
|
||||
27, 29, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 11, 15, 14, 20, 21, 22, 23, 24, 25, 26
|
||||
};
|
||||
|
||||
// Maps switch LEDs from Row/Col to ISSI matrix.
|
||||
// Value breakdown:
|
||||
// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||||
// | | ISSI Col | ISSI Row |
|
||||
// / |
|
||||
// Device
|
||||
const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] =
|
||||
KEYMAP(
|
||||
0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91,
|
||||
0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1,
|
||||
0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3,
|
||||
0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2,
|
||||
0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
|
||||
139
keyboards/lfkeyboards/lfk87/lfk87.h
Normal file
139
keyboards/lfkeyboards/lfk87/lfk87.h
Normal file
@ -0,0 +1,139 @@
|
||||
#ifndef LFK87_H
|
||||
#define LFK87_H
|
||||
|
||||
/* if the kb.h file exists (because we're running from qmkbuilder) include it */
|
||||
#if __has_include("kb.h")
|
||||
#include "kb.h"
|
||||
#endif
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include <avr/sfr_defs.h>
|
||||
|
||||
#ifndef cbi
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#endif
|
||||
|
||||
#ifndef sbi
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#endif
|
||||
|
||||
|
||||
typedef struct RGB_Color {
|
||||
uint16_t red;
|
||||
uint16_t green;
|
||||
uint16_t blue;
|
||||
} RGB_Color;
|
||||
|
||||
typedef struct Layer_Info {
|
||||
uint32_t layer;
|
||||
uint32_t mask;
|
||||
RGB_Color color;
|
||||
} Layer_Info;
|
||||
|
||||
extern const uint32_t layer_count;
|
||||
extern const Layer_Info layer_info[];
|
||||
|
||||
enum action_functions {
|
||||
LFK_CLEAR = 0, // Resets all layers
|
||||
LFK_ESC_TILDE, // esc+lshift = ~
|
||||
LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom
|
||||
LFK_CLICK_TOGGLE, // Adjusts click duration
|
||||
LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency
|
||||
LFK_CLICK_FREQ_LOWER, // Adjusts click frequency
|
||||
LFK_CLICK_TIME_LONGER, // Adjusts click duration
|
||||
LFK_CLICK_TIME_SHORTER, // Adjusts click duration
|
||||
LFK_DEBUG_SETTINGS, // prints LED and click settings to HID
|
||||
LFK_LED_TEST, // cycles through switch and RGB LEDs
|
||||
LFK_PLAY_ONEUP
|
||||
};
|
||||
|
||||
#define CLICK_HZ 500
|
||||
#define CLICK_MS 2
|
||||
#define CLICK_ENABLED 0
|
||||
|
||||
void reset_keyboard_kb(void);
|
||||
void click(uint16_t freq, uint16_t duration);
|
||||
|
||||
#define k00 KC_NO
|
||||
#ifdef LFK_TKL_REV_A
|
||||
#ifndef KEYMAP
|
||||
#define KEYMAP( \
|
||||
k11, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h, \
|
||||
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \
|
||||
k51, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k5g, \
|
||||
k61, k62, k63, k67, k6b, k6c, k6d, k6e, k6f, k6g, k6h \
|
||||
) \
|
||||
{ \
|
||||
{k11, k00, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h}, \
|
||||
{k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k00, k00, k00, k00}, \
|
||||
{k51, k00, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k00, k00, k5g, k00}, \
|
||||
{k61, k62, k63, k00, k00, k00, k67, k00, k00, k00, k6b, k6c, k6d, k6e, k6f, k6g, k6h}, \
|
||||
}
|
||||
|
||||
#endif //!KEYMAP#endif
|
||||
#ifndef ISO_KEYMAP
|
||||
#define ISO_KEYMAP( \
|
||||
k11, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h, \
|
||||
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \
|
||||
k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k5g, \
|
||||
k61, k62, k63, k67, k6b, k6c, k6d, k6e, k6f, k6g, k6h \
|
||||
) \
|
||||
{ \
|
||||
{k11, k00, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h}, \
|
||||
{k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k00, k00, k00, k00}, \
|
||||
{k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k00, k00, k5g, k00}, \
|
||||
{k61, k62, k63, k00, k00, k00, k67, k00, k00, k00, k6b, k6c, k6d, k6e, k6f, k6g, k6h}, \
|
||||
}
|
||||
#endif //!ISO_KEYMAP
|
||||
#else // RevC+ keymaps
|
||||
#ifndef KEYMAP
|
||||
#define KEYMAP( \
|
||||
k71, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, k1g, \
|
||||
k72, k73, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, \
|
||||
k74, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, \
|
||||
k61, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, \
|
||||
k62, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5f, \
|
||||
k63, k64, k65, k67, k6a, k6b, k6c, k6d, k6e, k6f, k6g \
|
||||
) \
|
||||
{ \
|
||||
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k00, k1e, k1f, k1g}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k00, k2e, k2f, k2g}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g}, \
|
||||
{k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k00, k00, k00, k00}, \
|
||||
{k00, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k00, k00, k5f, k00}, \
|
||||
{k61, k62, k63, k64, k65, k00, k67, k00, k00, k6a, k6b, k6c, k6d, k6e, k6f, k6g}, \
|
||||
{k71, k72, k73, k74, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00}, \
|
||||
}
|
||||
|
||||
#endif //!KEYMAP#endif
|
||||
#ifndef ISO_KEYMAP
|
||||
#define ISO_KEYMAP( \
|
||||
k71, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, k1g, \
|
||||
k72, k73, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, \
|
||||
k74, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, \
|
||||
k61, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, \
|
||||
k62, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5f, \
|
||||
k63, k64, k65, k67, k6a, k6b, k6c, k6d, k6e, k6f, k6g \
|
||||
) \
|
||||
{ \
|
||||
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k00, k1e, k1f, k1g}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k00, k2e, k2f, k2g}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g}, \
|
||||
{k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k00, k00, k00, k00}, \
|
||||
{k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k00, k00, k5f, k00}, \
|
||||
{k61, k62, k63, k64, k65, k00, k67, k00, k00, k6a, k6b, k6c, k6d, k6e, k6f, k6g}, \
|
||||
{k71, k72, k73, k74, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00}, \
|
||||
}
|
||||
#endif //!ISO_KEYMAP
|
||||
#endif //Rev
|
||||
|
||||
#endif //LFK87_H
|
||||
14
keyboards/lfkeyboards/lfk87/readme.md
Normal file
14
keyboards/lfkeyboards/lfk87/readme.md
Normal file
@ -0,0 +1,14 @@
|
||||
LFK87
|
||||
===
|
||||
|
||||
A standard TKL with RGB underglow, in switch backlighting and audio support.
|
||||
|
||||
Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
|
||||
Hardware Supported: LFK87, SMK87
|
||||
Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make lfkeyboards/lfk87:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
31
keyboards/lfkeyboards/lfk87/rules.mk
Normal file
31
keyboards/lfkeyboards/lfk87/rules.mk
Normal file
@ -0,0 +1,31 @@
|
||||
# Set the LFK87 hardware version.
|
||||
#
|
||||
# A - Green PCB. at90usb1286 Only 3 exist
|
||||
# B - We don't talk about RevB
|
||||
# C-D - Black PCB. at90usb646 First public release
|
||||
#
|
||||
LFK_REV = C
|
||||
|
||||
ifeq ($(LFK_REV), A)
|
||||
MCU = at90usb1286
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=8192
|
||||
else
|
||||
MCU = at90usb646
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
endif
|
||||
OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV)
|
||||
|
||||
# Extra source files for IS3731 lighting
|
||||
SRC = TWIlib.c issi.c lighting.c
|
||||
|
||||
# Processor frequency.
|
||||
F_CPU = 16000000
|
||||
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
0
keyboards/lfkeyboards/lfkeyboards.c
Normal file
0
keyboards/lfkeyboards/lfkeyboards.c
Normal file
0
keyboards/lfkeyboards/lfkeyboards.h
Normal file
0
keyboards/lfkeyboards/lfkeyboards.h
Normal file
157
keyboards/lfkeyboards/lighting.c
Normal file
157
keyboards/lfkeyboards/lighting.c
Normal file
@ -0,0 +1,157 @@
|
||||
#ifdef ISSI_ENABLE
|
||||
|
||||
|
||||
#include <avr/sfr_defs.h>
|
||||
#include <avr/timer_avr.h>
|
||||
#include <avr/wdt.h>
|
||||
#include "quantum.h"
|
||||
// #include "lfk87.h"
|
||||
#include "issi.h"
|
||||
#include "TWIlib.h"
|
||||
#include "lighting.h"
|
||||
#include "debug.h"
|
||||
#include "rgblight.h"
|
||||
#include "audio/audio.h"
|
||||
|
||||
|
||||
extern rgblight_config_t rgblight_config; // Declared in rgblight.c
|
||||
|
||||
const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP;
|
||||
|
||||
// RGB# to ISSI matrix, this is the same across all revisions
|
||||
const uint8_t rgb_leds[][3][2] = {
|
||||
{{0, 0}, {0, 0}, {0, 0}},
|
||||
{{1, 1}, {2, 3}, {2, 4}}, // RGB1/RGB17
|
||||
{{2, 1}, {2, 2}, {3, 4}}, // RGB2/RGB18
|
||||
{{3, 1}, {3, 2}, {3, 3}}, // RGB3/RGB19
|
||||
{{4, 1}, {4, 2}, {4, 3}}, // RGB4/RGB20
|
||||
{{5, 1}, {5, 2}, {5, 3}}, // RGB5/RGB21
|
||||
{{6, 1}, {6, 2}, {6, 3}}, // RGB6/RGB22
|
||||
{{7, 1}, {7, 2}, {7, 3}}, // RGB6/RGB23
|
||||
{{8, 1}, {8, 2}, {8, 3}}, // RGB8/RGB24
|
||||
{{1, 9}, {1, 8}, {1, 7}}, // RGB9/RGB25
|
||||
{{2, 9}, {2, 8}, {2, 7}}, // RGB10/RGB26
|
||||
{{3, 9}, {3, 8}, {3, 7}}, // RGB11/RGB27
|
||||
{{4, 9}, {4, 8}, {4, 7}}, // RGB12/RGB28
|
||||
{{5, 9}, {5, 8}, {5, 7}}, // RGB13/RGB29
|
||||
{{6, 9}, {6, 8}, {6, 7}}, // RGB14/RGB30
|
||||
{{7, 9}, {7, 8}, {6, 6}}, // RGB15/RGB31
|
||||
{{8, 9}, {7, 7}, {7, 6}} // RGB16/RGB32
|
||||
};
|
||||
|
||||
void set_rgb(uint8_t rgb_led, uint8_t red, uint8_t green, uint8_t blue){
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
uint8_t matrix = rgb_matrices[0];
|
||||
if(rgb_led >= 17){
|
||||
matrix = rgb_matrices[1];
|
||||
rgb_led -= 16;
|
||||
}
|
||||
if(rgb_leds[rgb_led][0][1] != 0){
|
||||
activateLED(matrix, rgb_leds[rgb_led][0][0], rgb_leds[rgb_led][0][1], red);
|
||||
}
|
||||
if(rgb_leds[rgb_led][1][1] != 0){
|
||||
activateLED(matrix, rgb_leds[rgb_led][1][0], rgb_leds[rgb_led][1][1], green);
|
||||
}
|
||||
if(rgb_leds[rgb_led][2][1] != 0){
|
||||
activateLED(matrix, rgb_leds[rgb_led][2][0], rgb_leds[rgb_led][2][1], blue);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level){
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
uint8_t pwm_value = 0;
|
||||
if(level >= BACKLIGHT_LEVELS){
|
||||
level = BACKLIGHT_LEVELS;
|
||||
}
|
||||
if(level > 0){
|
||||
pwm_value = backlight_pwm_map[level-1];
|
||||
}
|
||||
for(int x = 1; x <= 9; x++){
|
||||
for(int y = 1; y <= 9; y++){
|
||||
activateLED(switch_matrices[0], x, y, pwm_value);
|
||||
activateLED(switch_matrices[1], x, y, pwm_value);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void set_underglow(uint8_t red, uint8_t green, uint8_t blue){
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
for(uint8_t x = 1; x <= 32; x++){
|
||||
set_rgb(x, red, green, blue);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
void rgblight_set(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
for(uint8_t i = 0; (i < sizeof(rgb_sequence)) && (i < RGBLED_NUM); i++){
|
||||
if(rgblight_config.enable){
|
||||
set_rgb(rgb_sequence[i], led[i].r, led[i].g, led[i].b);
|
||||
}else{
|
||||
set_rgb(rgb_sequence[i], 0, 0, 0);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void set_backlight_by_keymap(uint8_t col, uint8_t row){
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
uint8_t lookup_value = switch_leds[row][col];
|
||||
uint8_t matrix = switch_matrices[0];
|
||||
if(lookup_value & 0x80){
|
||||
matrix = switch_matrices[1];
|
||||
}
|
||||
issi_devices[0]->led_dirty = 1;
|
||||
uint8_t led_col = (lookup_value & 0x70) >> 4;
|
||||
uint8_t led_row = lookup_value & 0x0F;
|
||||
activateLED(matrix, led_col, led_row, 255);
|
||||
#endif
|
||||
}
|
||||
|
||||
void force_issi_refresh(){
|
||||
#ifdef ISSI_ENABLE
|
||||
issi_devices[0]->led_dirty = true;
|
||||
update_issi(0, true);
|
||||
issi_devices[3]->led_dirty = true;
|
||||
update_issi(3, true);
|
||||
#endif
|
||||
}
|
||||
|
||||
void led_test(){
|
||||
#ifdef ISSI_ENABLE
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
// This test take a long time to run, disable the WTD until its complete
|
||||
wdt_disable();
|
||||
#endif
|
||||
backlight_set(0);
|
||||
set_underglow(0, 0, 0);
|
||||
force_issi_refresh();
|
||||
set_underglow(0, 0, 0);
|
||||
for(uint8_t x = 0; x < sizeof(rgb_sequence); x++){
|
||||
set_rgb(rgb_sequence[x], 255, 0, 0);
|
||||
force_issi_refresh();
|
||||
_delay_ms(250);
|
||||
set_rgb(rgb_sequence[x], 0, 255, 0);
|
||||
force_issi_refresh();
|
||||
_delay_ms(250);
|
||||
set_rgb(rgb_sequence[x], 0, 0, 255);
|
||||
force_issi_refresh();
|
||||
_delay_ms(250);
|
||||
set_rgb(rgb_sequence[x], 0, 0, 0);
|
||||
force_issi_refresh();
|
||||
}
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
wdt_enable(WDTO_250MS);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
void backlight_init_ports(void){
|
||||
issi_init();
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
53
keyboards/lfkeyboards/lighting.h
Normal file
53
keyboards/lfkeyboards/lighting.h
Normal file
@ -0,0 +1,53 @@
|
||||
#ifndef LIGHTING_H
|
||||
#define LIGHTING_H
|
||||
|
||||
|
||||
// rgb_sequence[RGBLED_NUM]
|
||||
//
|
||||
// Array used for sequential lighting effects.
|
||||
//
|
||||
// Example LFK78 RevC+ RGB Map:
|
||||
// 27 29 10 9 8 7 6
|
||||
// 26 5
|
||||
// 25 4
|
||||
// 24 3
|
||||
// 23 22 21 20 14 15 11 1 2
|
||||
//
|
||||
// const uint8_t rgb_sequence[] = {
|
||||
// 27, 29, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1,
|
||||
// 11, 15, 14, 20, 21, 22, 23, 24, 25, 26
|
||||
// };
|
||||
extern const uint8_t rgb_sequence[RGBLED_NUM];
|
||||
|
||||
// switch_matrices[]
|
||||
//
|
||||
// The ISSI matrices for switch backlighting
|
||||
//
|
||||
// Example LFK78 RevC+ - ISSI Device 0, banks 0 and 1:
|
||||
// switch_matrices[] = {0, 1};
|
||||
extern const uint8_t switch_matrices[];
|
||||
|
||||
// rgb_matrices[]
|
||||
// The ISSI matrices for RGB Underglow
|
||||
//
|
||||
// Example LFK78 RevC+ - ISSI Device 3, banks 0 and 1:
|
||||
// rgb_matrices[] = {6, 7};
|
||||
extern const uint8_t rgb_matrices[];
|
||||
|
||||
// switch_leds[MATRIX_ROWS][MATRIX_COLS]
|
||||
// Maps switch LEDs from Row/Col to ISSI matrix.
|
||||
// Value breakdown:
|
||||
// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||||
// | | ISSI Col | ISSI Row |
|
||||
// | |
|
||||
// Device
|
||||
extern const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS];
|
||||
|
||||
void led_test(void);
|
||||
void force_issi_refresh(void);
|
||||
void set_backlight(uint8_t level);
|
||||
void set_underglow(uint8_t red, uint8_t green, uint8_t blue);
|
||||
void set_rgb(uint8_t rgb_led, uint8_t red, uint8_t green, uint8_t blue);
|
||||
void set_backlight_by_keymap(uint8_t col, uint8_t row);
|
||||
|
||||
#endif
|
||||
1
keyboards/lfkeyboards/rules.mk
Normal file
1
keyboards/lfkeyboards/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
SRC = TWIlib.c issi.c lighting.c
|
||||
168
keyboards/lfkeyboards/smk65/config.h
Normal file
168
keyboards/lfkeyboards/smk65/config.h
Normal file
@ -0,0 +1,168 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6062
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER LFKeyboards
|
||||
#define PRODUCT SMK65v2
|
||||
#define DESCRIPTION QMK keyboard firmware for SMK65
|
||||
|
||||
// RevA
|
||||
// #define DIODE_DIRECTION COL2ROW
|
||||
// #define MATRIX_ROWS 5
|
||||
// #define MATRIX_COLS 16
|
||||
// #define MATRIX_ROW_PINS {B7, F7, F6, F5, F4}
|
||||
// #define MATRIX_COL_PINS {F0, F1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C7, B3, B2, B1, B0}
|
||||
// #define UNUSED_PINS {}
|
||||
|
||||
// RevB
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 16
|
||||
#define MATRIX_ROW_PINS {D6, D7, E0, C3, C4}
|
||||
#define MATRIX_COL_PINS {F2, C5, E5, E4, B7, B6, B5, B4, B3, B2, B1, B0, E1, C0, C1, C2}
|
||||
#define UNUSED_PINS {}
|
||||
#define RGBLED_NUM 20 // Number of LEDs
|
||||
|
||||
//RevB only:
|
||||
|
||||
#define AUDIO_VOICES
|
||||
#define C6_AUDIO
|
||||
// #define B5_AUDIO
|
||||
|
||||
#define BACKLIGHT_LEVELS 8
|
||||
#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255}
|
||||
|
||||
#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile
|
||||
#define RGBLED_NUM 20 // Number of LEDs
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
8
keyboards/lfkeyboards/smk65/keymaps/default/config.h
Normal file
8
keyboards/lfkeyboards/smk65/keymaps/default/config.h
Normal file
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
85
keyboards/lfkeyboards/smk65/keymaps/default/keymap.c
Normal file
85
keyboards/lfkeyboards/smk65/keymaps/default/keymap.c
Normal file
@ -0,0 +1,85 @@
|
||||
#include "smk65.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
//Define a shorter 'transparent' key code to make the keymaps more compact
|
||||
#define KC_TR KC_TRNS
|
||||
|
||||
enum keymap_layout {
|
||||
VANILLA = 0,
|
||||
FUNC,
|
||||
SETTINGS,
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[VANILLA] = KEYMAP(
|
||||
/* Keymap VANILLA: (Base Layer) Default Layer
|
||||
* ,------------------------------------------------------------.----.
|
||||
* |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| Ins|
|
||||
* |------------------------------------------------------------|----|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| Del|
|
||||
* |------------------------------------------------------------|----|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp|
|
||||
* |------------------------------------------------------------|----|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgDn|
|
||||
* |-----------------------------------------------------------------|
|
||||
* |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig |
|
||||
* `-----------------------------------------------------------------'
|
||||
*/
|
||||
KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
[FUNC] = KEYMAP(
|
||||
/* Keymap VANILLA: Function Layer
|
||||
* ,------------------------------------------------------------.----.
|
||||
* |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| Ins|
|
||||
* |------------------------------------------------------------|----|
|
||||
* |AudTgl| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| Del|
|
||||
* |------------------------------------------------------------|----|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp|
|
||||
* |------------------------------------------------------------|----|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgDn|
|
||||
* |-----------------------------------------------------------------|
|
||||
* |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig |
|
||||
* `-----------------------------------------------------------------'
|
||||
*/
|
||||
KC_GRV,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14,
|
||||
AU_TOG, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR,
|
||||
KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR,
|
||||
KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR,
|
||||
KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers
|
||||
ACTION_FUNCTION(LFK_ESC_TILDE), // FN1 - esc+shift = ~, else escape
|
||||
};
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
36
keyboards/lfkeyboards/smk65/keymaps/default/rules.mk
Normal file
36
keyboards/lfkeyboards/smk65/keymaps/default/rules.mk
Normal file
@ -0,0 +1,36 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = yes # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Disable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Disable RGB underlight
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
TAP_DANCE_ENABLE = no
|
||||
|
||||
ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled
|
||||
WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(ISSI_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DISSI_ENABLE
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
|
||||
endif
|
||||
14
keyboards/lfkeyboards/smk65/readme.md
Normal file
14
keyboards/lfkeyboards/smk65/readme.md
Normal file
@ -0,0 +1,14 @@
|
||||
SMK65
|
||||
===
|
||||
|
||||
65% layout based on Mat3o's Whitefox, but with support for SMK switches.
|
||||
|
||||
Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
|
||||
Hardware Supported: SMK65
|
||||
Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make lfkeyboards/smk65:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
17
keyboards/lfkeyboards/smk65/rules.mk
Normal file
17
keyboards/lfkeyboards/smk65/rules.mk
Normal file
@ -0,0 +1,17 @@
|
||||
MCU = at90usb646
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Extra source files for IS3731 lighting
|
||||
SRC = TWIlib.c issi.c lighting.c
|
||||
|
||||
# Processor frequency.
|
||||
F_CPU = 16000000
|
||||
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
164
keyboards/lfkeyboards/smk65/smk65.c
Normal file
164
keyboards/lfkeyboards/smk65/smk65.c
Normal file
@ -0,0 +1,164 @@
|
||||
#include <avr/sfr_defs.h>
|
||||
#include <avr/timer_avr.h>
|
||||
#include <avr/wdt.h>
|
||||
#include "smk65.h"
|
||||
#include "keymap.h"
|
||||
#include "debug.h"
|
||||
#include "issi.h"
|
||||
#include "TWIlib.h"
|
||||
#include "lighting.h"
|
||||
|
||||
uint16_t click_hz = CLICK_HZ;
|
||||
uint16_t click_time = CLICK_MS;
|
||||
uint8_t click_toggle = CLICK_ENABLED;
|
||||
|
||||
|
||||
void matrix_init_kb(void)
|
||||
{
|
||||
matrix_init_user();
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
// audio_init() sets PB5 to output and drives it low, which breaks our matrix
|
||||
// so reset PB5 to input
|
||||
cbi(DDRB, 5);
|
||||
sbi(PORTB, 5);
|
||||
#else
|
||||
// If we're not using the audio pin, drive it low
|
||||
sbi(DDRC, 6);
|
||||
cbi(PORTC, 6);
|
||||
#endif
|
||||
|
||||
#ifdef ISSI_ENABLE
|
||||
issi_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void)
|
||||
{
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
wdt_reset();
|
||||
#endif
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void click(uint16_t freq, uint16_t duration){
|
||||
#ifdef AUDIO_ENABLE
|
||||
if(freq >= 100 && freq <= 20000 && duration < 100){
|
||||
play_note(freq, 10);
|
||||
for (uint16_t i = 0; i < duration; i++){
|
||||
_delay_ms(1);
|
||||
}
|
||||
stop_all_notes();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record)
|
||||
{
|
||||
// Test code that turns on the switch led for the key that is pressed
|
||||
// set_backlight_by_keymap(record->event.key.col, record->event.key.row);
|
||||
if (click_toggle && record->event.pressed){
|
||||
click(click_hz, click_time);
|
||||
}
|
||||
if (keycode == RESET) {
|
||||
reset_keyboard_kb();
|
||||
} else {
|
||||
}
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
int8_t sign = 1;
|
||||
#endif
|
||||
if(id == LFK_ESC_TILDE){
|
||||
// Send ~ on shift-esc
|
||||
void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
|
||||
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
|
||||
method(shifted ? KC_GRAVE : KC_ESCAPE);
|
||||
send_keyboard_report();
|
||||
}else if(event->event.pressed){
|
||||
switch(id){
|
||||
case LFK_SET_DEFAULT_LAYER:
|
||||
// set/save the current base layer to eeprom, falls through to LFK_CLEAR
|
||||
eeconfig_update_default_layer(1UL << opt);
|
||||
default_layer_set(1UL << opt);
|
||||
case LFK_CLEAR:
|
||||
// Go back to default layer
|
||||
layer_clear();
|
||||
break;
|
||||
#ifdef AUDIO_ENABLE
|
||||
case LFK_CLICK_FREQ_LOWER:
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_FREQ_HIGHER:
|
||||
click_hz += sign * 100;
|
||||
click(click_hz, click_time);
|
||||
break;
|
||||
case LFK_CLICK_TOGGLE:
|
||||
if(click_toggle){
|
||||
click_toggle = 0;
|
||||
click(4000, 100);
|
||||
click(1000, 100);
|
||||
}else{
|
||||
click_toggle = 1;
|
||||
click(1000, 100);
|
||||
click(4000, 100);
|
||||
}
|
||||
break;
|
||||
case LFK_CLICK_TIME_SHORTER:
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_TIME_LONGER:
|
||||
click_time += sign;
|
||||
click(click_hz, click_time);
|
||||
break;
|
||||
#endif
|
||||
case LFK_DEBUG_SETTINGS:
|
||||
dprintf("Click:\n");
|
||||
dprintf(" toggle: %d\n", click_toggle);
|
||||
dprintf(" freq(hz): %d\n", click_hz);
|
||||
dprintf(" duration(ms): %d\n", click_time);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void reset_keyboard_kb(){
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
MCUSR = 0;
|
||||
wdt_disable();
|
||||
wdt_reset();
|
||||
#endif
|
||||
reset_keyboard();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led)
|
||||
{
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
// LFK lighting info
|
||||
const uint8_t switch_matrices[] = {0, 1};
|
||||
const uint8_t rgb_matrices[] = {6, 7};
|
||||
// const uint8_t rgb_sequence[] = {
|
||||
// 14, 24, 23, 22, 21, 20, 19, 18, 26, 25, 28, 29,
|
||||
// 30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
|
||||
// };
|
||||
const uint8_t rgb_sequence[] = {
|
||||
25, 28, 29,
|
||||
30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
|
||||
};
|
||||
// Maps switch LEDs from Row/Col to ISSI matrix.
|
||||
// Value breakdown:
|
||||
// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||||
// / \ ISSI Col | ISSI Row |
|
||||
// matrix idx
|
||||
// const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] =
|
||||
// KEYMAP(
|
||||
// 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91,
|
||||
// 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1,
|
||||
// 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3,
|
||||
// 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2,
|
||||
// 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1);
|
||||
90
keyboards/lfkeyboards/smk65/smk65.h
Normal file
90
keyboards/lfkeyboards/smk65/smk65.h
Normal file
@ -0,0 +1,90 @@
|
||||
#ifndef SMK65_H
|
||||
#define SMK65_H
|
||||
|
||||
/* if the kb.h file exists (because we're running from qmkbuilder) include it */
|
||||
#ifdef __has_include
|
||||
#if __has_include("kb.h")
|
||||
#include "kb.h"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include <avr/sfr_defs.h>
|
||||
|
||||
#ifndef cbi
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#endif
|
||||
|
||||
#ifndef sbi
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#endif
|
||||
|
||||
|
||||
typedef struct RGB_Color {
|
||||
uint16_t red;
|
||||
uint16_t green;
|
||||
uint16_t blue;
|
||||
} RGB_Color;
|
||||
|
||||
typedef struct Layer_Info {
|
||||
uint32_t layer;
|
||||
uint32_t mask;
|
||||
RGB_Color color;
|
||||
} Layer_Info;
|
||||
|
||||
extern const uint32_t layer_count;
|
||||
extern const Layer_Info layer_info[];
|
||||
|
||||
enum action_functions {
|
||||
LFK_CLEAR = 0, // Resets all layers
|
||||
LFK_ESC_TILDE, // esc+lshift = ~
|
||||
LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom
|
||||
LFK_CLICK_TOGGLE, // Adjusts click duration
|
||||
LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency
|
||||
LFK_CLICK_FREQ_LOWER, // Adjusts click frequency
|
||||
LFK_CLICK_TIME_LONGER, // Adjusts click duration
|
||||
LFK_CLICK_TIME_SHORTER, // Adjusts click duration
|
||||
LFK_DEBUG_SETTINGS, // prints LED and click settings to HID
|
||||
LFK_LED_TEST // cycles through switch and RGB LEDs
|
||||
};
|
||||
|
||||
#define CLICK_HZ 500
|
||||
#define CLICK_MS 2
|
||||
#define CLICK_ENABLED 0
|
||||
|
||||
void reset_keyboard_kb(void);
|
||||
void click(uint16_t freq, uint16_t duration);
|
||||
|
||||
/* Vanilla Keymap */
|
||||
// This a shortcut to help you visually see your layout.
|
||||
/*
|
||||
* ,-------------------------------------------------------------------------------.
|
||||
* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1G |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | 21 | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2F | 2G |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | 31 | 32 |33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3F | 3G |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | 41 | 42 |43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4F | 4G |
|
||||
* |-------------------------------------------------------------------------------|
|
||||
* | 51 | 52 | 53 | 57 | 5A | 5B | 5C | 5D | 5E | 3E | 4E |
|
||||
* `-------------------------------------------------------------------------------'
|
||||
*/
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, k1G, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k3G, \
|
||||
k41, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \
|
||||
k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \
|
||||
) { \
|
||||
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F, k1G}, \
|
||||
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, KC_NO, k2F, k2G}, \
|
||||
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, KC_NO, k3E, k3F, k3G}, \
|
||||
{k41, KC_NO, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G}, \
|
||||
{k51, k52, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E, KC_NO, KC_NO}, \
|
||||
}
|
||||
|
||||
#endif //SMK65_H
|
||||
Loading…
Reference in New Issue
Block a user