[Keyboard] Add Jot50 handwired board (#5431)
This commit is contained in:
jotix
Drashna Jaelre
parent
68d4f78b25
commit
bd61b5b0ed
38
keyboards/handwired/jot50/config.h
Normal file
38
keyboards/handwired/jot50/config.h
Normal file
@ -0,0 +1,38 @@
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Jotix
|
||||
#define PRODUCT Jot50
|
||||
#define DESCRIPTION A 5x12 compact ortholinear keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* pro_micro pin-out */
|
||||
#define MATRIX_ROW_PINS { D7, E6, B4, B6, B2 }
|
||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, D3, D2, D1, D0, D4, C6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* leds */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
#define BACKLIGHT_PIN B5
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BREATHING_PERIOD 5
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
6
keyboards/handwired/jot50/jot50.c
Normal file
6
keyboards/handwired/jot50/jot50.c
Normal file
@ -0,0 +1,6 @@
|
||||
#include "jot50.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
19
keyboards/handwired/jot50/jot50.h
Normal file
19
keyboards/handwired/jot50/jot50.h
Normal file
@ -0,0 +1,19 @@
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
#define LAYOUT_ortho_5x12( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b } \
|
||||
}
|
||||
88
keyboards/handwired/jot50/keymaps/default/keymap.c
Normal file
88
keyboards/handwired/jot50/keymaps/default/keymap.c
Normal file
@ -0,0 +1,88 @@
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
#define _ADJUST 3
|
||||
|
||||
enum planck_keycodes {
|
||||
BACKLIT = SAFE_RANGE
|
||||
};
|
||||
|
||||
#define LOWER MO(_LOWER)
|
||||
#define RAISE MO(_RAISE)
|
||||
|
||||
/* Funct
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | caps | F11 | F12 | | | | | - | = | [ | ] | |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | | vol- | mute | vol+ | | | | | | | | \ |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | | prev | play | next | | | | | | | | |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | | | | | | | | | home | pgdn | pgup | end |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
*/
|
||||
#define _FUNCT LAYOUT_ortho_5x12 (\
|
||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,\
|
||||
KC_CAPS, KC_F11, KC_F12, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,\
|
||||
_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, KC_BSLS,\
|
||||
_______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END\
|
||||
)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | bspc |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | ` | Q | W | E | R | T | Y | U | I | O | P | del |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | tab | A | S | D | F | G | H | J | K | L | ; | ' |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | lshift | Z | X | C | V | B | N | M | , | . | / | enter |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
* | lctrl | lgui | lalt | ralt | lower | space | space | raise | left | down | up | right |
|
||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
*/
|
||||
[_QWERTY] = LAYOUT_ortho_5x12 (
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||
KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
|
||||
),
|
||||
|
||||
[_LOWER] = _FUNCT,
|
||||
|
||||
[_RAISE] = _FUNCT,
|
||||
|
||||
[_ADJUST] = LAYOUT_ortho_5x12 (
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, RESET, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, BL_STEP, BL_BRTG, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
};
|
||||
|
||||
uint32_t layer_state_set_user(uint32_t state) {
|
||||
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
37
keyboards/handwired/jot50/readme.md
Normal file
37
keyboards/handwired/jot50/readme.md
Normal file
@ -0,0 +1,37 @@
|
||||
# Jotanck
|
||||
|
||||
![Jotanck]
|
||||
|
||||
A compact 50% (12x5) ortholinear keyboard kit inspired in the Preonic made by jotix.
|
||||
|
||||
Keyboard Maintainer: [jotix](https://github.com/jotix)
|
||||
Hardware Supported: Arduino Pro Micro
|
||||
|
||||
### Arduino Pro Micro Pinout
|
||||
|
||||
| Rows | 0 | 1 | 2 | 3 | 4 |
|
||||
|-------------|----|----|----|----|----|
|
||||
| Arduino pin | 6 | 7 | 8 | 10 | 16 |
|
||||
| QMK pin | D7 | E6 | B4 | B6 | B2 |
|
||||
|
||||
| Columns | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
|
||||
|-------------|----|----|----|----|----|----|-----|-----|----|----|----|----|
|
||||
| Arduino pin | A3 | A2 | A1 | A0 | 15 | 14 | TX0 | RXI | 2 | 3 | 4 | 5 |
|
||||
| QMK pin | F4 | F5 | F6 | F7 | B1 | B3 | D3 | D2 | D1 | D0 | D4 | C6 |
|
||||
|
||||
| | Backlight |
|
||||
|-------------|-----------|
|
||||
| Arduino pin | 9 |
|
||||
| QMK pin | B5 |
|
||||
|
||||
### Compiling the Firmware
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make handwired/jot50:default
|
||||
|
||||
### The Defaukt Keymap
|
||||
|
||||
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
66
keyboards/handwired/jot50/rules.mk
Normal file
66
keyboards/handwired/jot50/rules.mk
Normal file
@ -0,0 +1,66 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
||||
API_SYSEX_ENABLE = no
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
LAYOUTS = ortho_5x12
|
||||
Loading…
Reference in New Issue
Block a user