Updates bootloader settings, adds file size check (#2029)

* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title
This commit is contained in:
Jack Humbert 2017-11-27 23:08:21 -05:00 committed by GitHub
parent 9113f3387a
commit 9fdc276260
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
76 changed files with 481 additions and 548 deletions

62
bootloader.mk Normal file
View File

@ -0,0 +1,62 @@
# Copyright 2017 Jack Humbert
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# If it's possible that multiple bootloaders can be used for one project,
# you can leave this unset, and the correct size will be selected
# automatically.
#
# Sets the bootloader defined in the keyboard's/keymap's rules.mk
# Current options:
# atmel-dfu
# lufa-dfu
# qmk-dfu
# halfkay
# caterina
# bootloadHID
#
# BOOTLOADER_SIZE can still be defined manually, but it's recommended
# you add any possible configuration to this list
ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
OPT_DEFS += -DBOOTLOADER_DFU
BOOTLOADER_SIZE = 4096
endif
ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
OPT_DEFS += -DBOOTLOADER_LUFA_DFU
OPT_DEFS += -DBOOTLOADER_DFU
BOOTLOADER_SIZE = 4096
endif
ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
OPT_DEFS += -DBOOTLOADER_QMK_DFU
OPT_DEFS += -DBOOTLOADER_DFU
BOOTLOADER_SIZE = 4096
endif
ifeq ($(strip $(BOOTLOADER)), halfkay)
OPT_DEFS += -DBOOTLOADER_HALFKAY
BOOTLOADER_SIZE = 512
endif
ifeq ($(strip $(BOOTLOADER)), caterina)
OPT_DEFS += -DBOOTLOADER_CATERINA
BOOTLOADER_SIZE = 4096
endif
ifeq ($(strip $(BOOTLOADER)), bootloadHID)
OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
BOOTLOADER_SIZE = 4096
endif
ifdef BOOTLOADER_SIZE
OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
endif

View File

@ -230,6 +230,7 @@ VPATH += $(USER_PATH)
include common_features.mk include common_features.mk
include $(TMK_PATH)/protocol.mk include $(TMK_PATH)/protocol.mk
include $(TMK_PATH)/common.mk include $(TMK_PATH)/common.mk
include bootloader.mk
SRC += $(TMK_COMMON_SRC) SRC += $(TMK_COMMON_SRC)
OPT_DEFS += $(TMK_COMMON_DEFS) OPT_DEFS += $(TMK_COMMON_DEFS)
@ -266,10 +267,10 @@ $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG) $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
# Default target. # Default target.
all: build sizeafter all: build check-size
# Change the build target to build a HEX file or a library. # Change the build target to build a HEX file or a library.
build: elf hex build: elf cphex
#build: elf hex eep lss sym #build: elf hex eep lss sym
#build: lib #build: lib

View File

@ -1,12 +1,20 @@
# Flashing Intrustructions # Flashing Intrustructions / Bootloader Information
There are quite a few different types of bootloaders that keyboards use, and just about all of the use a different flashing method. Luckily, projects like the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) aim to be compatible with all the different types without having to think about it much, but this article will describe the different types of bootloaders, and available methods for flashing them. There are quite a few different types of bootloaders that keyboards use, and just about all of the use a different flashing method. Luckily, projects like the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) aim to be compatible with all the different types without having to think about it much, but this article will describe the different types of bootloaders, and available methods for flashing them.
If you have a bootloader selected with the `BOOTLOADER` variable in your `rules.mk`, QMK will automatically calculate if your .hex file is the right size to be flashed to the device, and output the total size it bytes (along with the max). To run this process manually, compile with the target `check-size`, eg `make planck/rev4:default:check-size`.
## DFU ## DFU
Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by many keyboards that have their own ICs on their PCBs (Older OLKB boards, Clueboards). Some keyboards may also use LUFA's DFU bootloader (or QMK's fork) (Newer OLKB boards) that adds in additional features specific to that hardware. Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by many keyboards that have their own ICs on their PCBs (Older OLKB boards, Clueboards). Some keyboards may also use LUFA's DFU bootloader (or QMK's fork) (Newer OLKB boards) that adds in additional features specific to that hardware.
These bootloaders are usually 4096 bytes for the atmega32u4 chip. To ensure compatability with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = atmel-dfu
Compatible flashers: Compatible flashers:
@ -26,15 +34,32 @@ or:
make <keyboard>:<keymap>:dfu make <keyboard>:<keymap>:dfu
### QMK DFU
QMK has a fork of the LUFA DFU bootloader that allows for a simple matrix scan for exiting the bootloader and returning to the application, as well as flashing an LED/making a ticking noise with a speaker when things are happening. To enable these features, use this block in your `config.h` (The key that exits the bootloader needs to be hooked-up to the INPUT and OUTPUT defined here):
#define QMK_ESC_OUTPUT F1 // usually COL
#define QMK_ESC_INPUT D5 // usually ROW
#define QMK_LED E6
#define QMK_SPEAKER C6
The Manufacturer and Product names are automatically pulled from your `config.h`, and "Bootloader" is added to the product.
To generate this bootloader, use the `bootloader` target, eg `make planck/rev4:default:bootloader`.
To generate a production-ready .hex file (containing the application and the bootloader), use the `production` target, eg `make planck/rev4:default:production`.
## Caterina ## Caterina
Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina. Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
This block of code allows for Caterina compatibility in QMK: To ensure compatability with the Caterina bootloader, make sure this block is present your `rules.mk`:
#define CATERINA_BOOTLOADER # Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
These bootloaders are usually 4096 bytes for the atmega32u4 chip. # different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
Compatible flashers: Compatible flashers:
@ -57,7 +82,13 @@ or
Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0). Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).
This bootloader is 512 bytes. To ensure compatability with the Halfkay bootloader, make sure this block is present your `rules.mk`:
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = halfkay
Compatible flashers: Compatible flashers:

View File

@ -5,7 +5,6 @@ ifdef TEENSY2
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else else
OPT_DEFS += -DATREUS_ASTAR OPT_DEFS += -DATREUS_ASTAR
OPT_DEFS += -DCATERINA_BOOTLOADER
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif endif
@ -27,7 +26,6 @@ MCU = atmega32u4
# software delays. # software delays.
F_CPU = 16000000 F_CPU = 16000000
# #
# LUFA specific # LUFA specific
# #
@ -47,19 +45,20 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifdef TEENSY2
BOOTLOADER = halfkay
else
BOOTLOADER = caterina
endif
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #

View File

@ -38,8 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } #define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 }
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL #define DIODE_DIRECTION ROW2COL

View File

@ -35,18 +35,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -41,7 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_ANIMATIONS
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = bootloadHID
# build options # build options
BOOTMAGIC_ENABLE = yes BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes

View File

@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_ANIMATIONS
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = bootloadHID
# build options # build options
BOOTMAGIC_ENABLE = yes BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes

View File

@ -1,6 +1,5 @@
OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO
OPT_DEFS += -DCATERINA_BOOTLOADER
CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
@ -45,19 +44,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #

View File

@ -1,4 +1,3 @@
BLUETOOTH = AdafruitBLE BLUETOOTH = AdafruitBLE
ADAFRUIT_BLE_ENABLE = yes ADAFRUIT_BLE_ENABLE = yes
OPT_DEFS += -DCATERINA_BOOTLOADER
F_CPU = 8000000 F_CPU = 8000000

View File

@ -43,19 +43,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task # Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #

View File

@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } #define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 }
#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} #define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1}
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -1,6 +1,5 @@
OPT_DEFS += -DDICHOTEMY_PROMICRO OPT_DEFS += -DDICHOTEMY_PROMICRO
OPT_DEFS += -DCATERINA_BOOTLOADER
DICHOTEMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ DICHOTEMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
@ -25,8 +24,6 @@ MCU = atmega32u4
# software delays. # software delays.
F_CPU = 16000000 F_CPU = 16000000
#
# LUFA specific # LUFA specific
# #
# Target architecture (see library "Board Types" documentation). # Target architecture (see library "Board Types" documentation).
@ -45,19 +42,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #

View File

@ -31,8 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 4 #define MATRIX_ROWS 4
#define MATRIX_COLS 14 #define MATRIX_COLS 14
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -34,18 +34,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -54,18 +54,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = halfkay
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
# If you have Left LEDs (see # If you have Left LEDs (see
# https://geekhack.org/index.php?topic=22780.msg873819#msg873819 for # https://geekhack.org/index.php?topic=22780.msg873819#msg873819 for
# details), include the following define: # details), include the following define:

View File

@ -52,8 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 } #define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 }
#define CATERINA_BOOTLOADER
#define UNUSED_PINS #define UNUSED_PINS
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */

View File

@ -33,14 +33,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #

View File

@ -5,21 +5,29 @@ SRC= babblePaste.c
ifdef ASTAR ifdef ASTAR
CFLAGS=-D ASTAR CFLAGS=-D ASTAR
OPT_DEFS += -DBOOTLOADER_SIZE=4096
MCU = atmega32u4 MCU = atmega32u4
OPT_DEFS += -DCATERINA_BOOTLOADER
SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \ SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
else else
MCU = at90usb1286 MCU = at90usb1286
OPT_DEFS += -DBOOTLOADER_SIZE=2048
SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
endif endif
F_CPU = 16000000 F_CPU = 16000000
ARCH = AVR8 ARCH = AVR8
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifdef ASTAR
BOOTLOADER = caterina
else
BOOTLOADER = atmel-dfu
endif
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

View File

@ -36,30 +36,25 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifdef TEENSY2 ifdef TEENSY2
BOOTLOADER = halfkay
OPT_DEFS += -DATREUS_TEENSY2 OPT_DEFS += -DATREUS_TEENSY2
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else else
BOOTLOADER = caterina
OPT_DEFS += -DATREUS_ASTAR OPT_DEFS += -DATREUS_ASTAR
OPT_DEFS += -DCATERINA_BOOTLOADER
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif endif
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# MCU name
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change yes to no to disable # change yes to no to disable

View File

@ -11,8 +11,6 @@
#define PRODUCT Space Odyssey #define PRODUCT Space Odyssey
#define DESCRIPTION Keyboard #define DESCRIPTION Keyboard
#define CATERINA_BOOTLOADER
#define MOUSEKEY_INTERVAL 16 #define MOUSEKEY_INTERVAL 16
#define MOUSEKEY_DELAY 0 #define MOUSEKEY_DELAY 0
#define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_TIME_TO_MAX 60

View File

@ -33,14 +33,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #

View File

@ -37,15 +37,23 @@ ARCH = AVR8
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifdef TEENSY2 ifdef TEENSY2
BOOTLOADER = halfkay
OPT_DEFS += -DATREUS_TEENSY2 OPT_DEFS += -DATREUS_TEENSY2
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else else
BOOTLOADER = caterina
OPT_DEFS += -DATREUS_ASTAR OPT_DEFS += -DATREUS_ASTAR
OPT_DEFS += -DCATERINA_BOOTLOADER
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif endif
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

View File

@ -53,8 +53,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define BACKLIGHT_BREATHING // #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3 // #define BACKLIGHT_LEVELS 3
#define CATERINA_BOOTLOADER
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5 #define DEBOUNCING_DELAY 5

View File

@ -35,19 +35,16 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change yes to no to disable # change yes to no to disable
# #

View File

@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 } #define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 }
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D7, E6, B4, D2, D4 } #define MATRIX_ROW_PINS { D7, E6, B4, D2, D4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -38,7 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define TAPPING_TOGGLE 3 #define TAPPING_TOGGLE 3
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -1,74 +0,0 @@
#!/usr/bin/env python
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
from __future__ import print_function
import os
import sys
import time
import usb
if len(sys.argv) < 2:
print('Usage: %s <firmware.hex>' % sys.argv[0])
sys.exit(1)
print('Searching for jj40... ', end='')
dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
if dev is None:
raise ValueError('Device not found')
print('Found', end='\n\n')
print('Device Information:')
print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
print('Manufacturer: %s' % (dev.iManufacturer))
print('Serial: %s' % (dev.iSerialNumber))
print('Product: %s' % (dev.iProduct), end='\n\n')
print('Transferring control to bootloader... ', end='')
dev.set_configuration()
request_type = usb.util.build_request_type(
usb.util.CTRL_OUT,
usb.util.CTRL_TYPE_CLASS,
usb.util.CTRL_RECIPIENT_DEVICE)
USBRQ_HID_SET_REPORT = 0x09
HID_REPORT_OPTION = 0x0301
try:
dev.ctrl_transfer(
request_type,
USBRQ_HID_SET_REPORT,
HID_REPORT_OPTION,
0,
[0, 0, 0xFF] + [0] * 5
)
except usb.core.USBError:
# for some reason I keep getting USBError, but it works!
pass
# wait a bit until bootloader starts up
time.sleep(2)
print('OK')
print('Programming...')
if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
print('\nDone!')

View File

@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = bootloadHID
# build options # build options
BOOTMAGIC_ENABLE = no BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = no MOUSEKEY_ENABLE = no
@ -39,11 +45,10 @@ KEY_LOCK_ENABLE = yes
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c SRC = matrix.c i2c.c
# programming options # programming options
PROGRAM_CMD = ./keyboards/jj40/program $(TARGET).hex PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

View File

@ -39,9 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
// #define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order // #define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
#define CATERINA_BOOTLOADER
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST

View File

@ -39,8 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
#define CATERINA_BOOTLOADER
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST

View File

@ -40,18 +40,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -39,8 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { F4, F7, D7, B3, B2, B6} #define MATRIX_COL_PINS { F4, F7, D7, B3, B2, B6}
// #define MATRIX_COL_PINS { B6, B2, B3, C6, F7, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order // #define MATRIX_COL_PINS { B6, B2, B3, C6, F7, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
#define CATERINA_BOOTLOADER
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST

View File

@ -38,8 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D7, E6, B4, B5 } #define MATRIX_ROW_PINS { D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 }
#define CATERINA_BOOTLOADER
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST

View File

@ -38,9 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D4, D7, E6, B4 } #define MATRIX_ROW_PINS { D4, D7, E6, B4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
#define CATERINA_BOOTLOADER
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST

View File

@ -40,18 +40,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN E2 #define RGB_DI_PIN E2
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = atmel-dfu
# build options # build options
BOOTMAGIC_ENABLE = yes BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes

View File

@ -26,8 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { B2, B6, B4, B5 } #define MATRIX_ROW_PINS { B2, B6, B4, B5 }
#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 } #define MATRIX_COL_PINS { F4, D3, D2, D1, D4 }
#define CATERINA_BOOTLOADER
#define USE_SERIAL #define USE_SERIAL
//#define EE_HANDS //#define EE_HANDS

View File

@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -1,6 +1,5 @@
OPT_DEFS += -DMITOSIS_PROMICRO OPT_DEFS += -DMITOSIS_PROMICRO
OPT_DEFS += -DCATERINA_BOOTLOADER
MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
@ -25,7 +24,6 @@ MCU = atmega32u4
# software delays. # software delays.
F_CPU = 16000000 F_CPU = 16000000
# #
# LUFA specific # LUFA specific
# #
@ -45,19 +43,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #

View File

@ -44,7 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_VAL_STEP 18 #define RGBLIGHT_VAL_STEP 18
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
#define TAPPING_TERM 200 #define TAPPING_TERM 200

View File

@ -1,74 +0,0 @@
#!/usr/bin/env python2.7
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
from __future__ import print_function
import os
import sys
import time
import usb
if len(sys.argv) < 2:
print('Usage: %s <firmware.hex>' % sys.argv[0])
sys.exit(1)
print('Searching for planck clone keyboard... ', end='')
dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
if dev is None:
raise ValueError('Device not found')
print('Found', end='\n\n')
print('Device Information:')
print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
print('Manufacturer: %s' % (dev.iManufacturer))
print('Serial: %s' % (dev.iSerialNumber))
print('Product: %s' % (dev.iProduct), end='\n\n')
print('Transferring control to bootloader... ', end='')
dev.set_configuration()
request_type = usb.util.build_request_type(
usb.util.CTRL_OUT,
usb.util.CTRL_TYPE_CLASS,
usb.util.CTRL_RECIPIENT_DEVICE)
USBRQ_HID_SET_REPORT = 0x09
HID_REPORT_OPTION = 0x0301
try:
dev.ctrl_transfer(
request_type,
USBRQ_HID_SET_REPORT,
HID_REPORT_OPTION,
0,
[0, 0, 0xFF] + [0] * 5
)
except usb.core.USBError:
# for some reason I keep getting USBError, but it works!
pass
# wait a bit until bootloader starts up
time.sleep(2)
print('OK')
print('Programming...')
if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
print('\nDone!')

View File

@ -9,6 +9,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = bootloadHID
# build options # build options
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
@ -26,11 +32,10 @@ RGBLIGHT_CUSTOM_DRIVER = yes
TAP_DANCE_ENABLE = no TAP_DANCE_ENABLE = no
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c SRC = matrix.c i2c.c
# programming options # programming options
PROGRAM_CMD = ./keyboards/mt40/program $(TARGET).hex PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

View File

@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } #define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -51,8 +51,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { D2, F5, F6, F7, B6, B5, B4, D7, D6 } #define MATRIX_COL_PINS { D2, F5, F6, F7, B6, B5, B4, D7, D6 }
/*/ /*/
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -27,7 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DESCRIPTION 40% keyboard #define DESCRIPTION 40% keyboard
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 12 #define RGBLED_NUM 12

View File

@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = bootloadHID
# build options # build options
BOOTMAGIC_ENABLE = yes BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes

View File

@ -4,6 +4,4 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
OPT_DEFS += -DBOOTLOADER_SIZE=8192
MCU = at90usb1286 MCU = at90usb1286

View File

@ -1,10 +1 @@
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6

View File

@ -1,9 +1 @@
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
AUDIO_ENABLE = yes # Audio output on port C6 AUDIO_ENABLE = yes # Audio output on port C6

View File

@ -1,9 +1 @@
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
AUDIO_ENABLE = yes # Audio output on port C6 AUDIO_ENABLE = yes # Audio output on port C6

View File

@ -34,6 +34,23 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifeq ($(strip $(KEYBOARD)), planck/rev3)
BOOTLOADER = atmel-dfu
endif
ifeq ($(strip $(KEYBOARD)), planck/rev4)
BOOTLOADER = atmel-dfu
endif
ifeq ($(strip $(KEYBOARD)), planck/rev5)
BOOTLOADER = qmk-dfu
endif
ifeq ($(strip $(KEYBOARD)), planck/light)
BOOTLOADER = qmk-dfu
endif
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@ -46,9 +63,9 @@ MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400) CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls MIDI_ENABLE = yes # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6 AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

View File

@ -36,18 +36,20 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifeq ($(strip $(KEYBOARD)), preonic/rev1)
BOOTLOADER = atmel-dfu
endif
ifeq ($(strip $(KEYBOARD)), preonic/rev2)
BOOTLOADER = qmk-dfu
endif
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -27,7 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_ANIMATIONS
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = atmel-dfu
# build options # build options
BOOTMAGIC_ENABLE = yes BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes

View File

@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } #define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -39,18 +39,15 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically

View File

@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_ANIMATIONS
#define NO_UART 1 #define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
# processor frequency # processor frequency
F_CPU = 12000000 F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = atmel-dfu
# build options # build options
BOOTMAGIC_ENABLE = yes BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup # custom matrix setup
CUSTOM_MATRIX = yes CUSTOM_MATRIX = yes

View File

@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_HOME, KC_HOME,
KC_SPC,KC_SPC,KC_END, KC_SPC,KC_SPC,KC_END,
// right hand // right hand
KC_NO, M(1), KC_7, KC_8, KC_9, KC_0, KC_NO, KC_NO, M(1), RESET, KC_8, KC_9, KC_0, KC_NO,
KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_P, KC_BSPC, KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_P, KC_BSPC,
RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_SCLN, KC_QUOT, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_SCLN, KC_QUOT,
KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT, KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT,

View File

@ -43,9 +43,9 @@ MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after: MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF: MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash: MSG_FLASH = Creating load file for flashing:
MSG_EEPROM = Creating load file for EEPROM: MSG_EEPROM = Creating load file for EEPROM:
MSG_BIN = Creating binary load file for Flash: MSG_BIN = Creating binary load file for flashing:
MSG_EXTENDED_LISTING = Creating Extended Listing: MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table: MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking: MSG_LINKING = Linking:
@ -76,3 +76,7 @@ define GENERATE_MSG_MAKE_TEST
endef endef
MSG_MAKE_TEST = $(eval $(call GENERATE_MSG_MAKE_TEST))$(MSG_MAKE_TEST_ACTUAL) MSG_MAKE_TEST = $(eval $(call GENERATE_MSG_MAKE_TEST))$(MSG_MAKE_TEST_ACTUAL)
MSG_TEST = Testing $(BOLD)$(TEST_NAME)$(NO_COLOR) MSG_TEST = Testing $(BOLD)$(TEST_NAME)$(NO_COLOR)
MSG_CHECK_FILESIZE = Checking file size of $(TARGET).hex
MSG_FILE_TOO_BIG = $(ERROR_COLOR)Your file is too big!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE)\n
MSG_FILE_TOO_SMALL = Your file is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n
MSG_FILE_JUST_RIGHT = File size is fine - $(CURRENT_SIZE)/$(MAX_SIZE)\n

View File

@ -143,7 +143,8 @@ void reset_keyboard(void) {
#else #else
wait_ms(250); wait_ms(250);
#endif #endif
#ifdef CATERINA_BOOTLOADER // this is also done later in bootloader.c - not sure if it's neccesary here
#ifdef BOOTLOADER_CATERINA
*(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
#endif #endif
bootloader_jump(); bootloader_jump();

View File

@ -121,22 +121,22 @@ qmk: $(BUILD_DIR)/$(TARGET).hex
printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk
# Program the device. # Program the device.
program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size
$(PROGRAM_CMD) $(PROGRAM_CMD)
teensy: $(BUILD_DIR)/$(TARGET).hex teensy: $(BUILD_DIR)/$(TARGET).hex check-size
$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
BATCHISP ?= batchisp BATCHISP ?= batchisp
flip: $(BUILD_DIR)/$(TARGET).hex flip: $(BUILD_DIR)/$(TARGET).hex check-size
$(BATCHISP) -hardware usb -device $(MCU) -operation erase f $(BATCHISP) -hardware usb -device $(MCU) -operation erase f
$(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program $(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
$(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0 $(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
DFU_PROGRAMMER ?= dfu-programmer DFU_PROGRAMMER ?= dfu-programmer
dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter dfu: $(BUILD_DIR)/$(TARGET).hex check-size
until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\ until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
echo "Error: Bootloader not found. Trying again in 5s." ;\ echo "Error: Bootloader not found. Trying again in 5s." ;\
sleep 5 ;\ sleep 5 ;\
@ -168,7 +168,7 @@ dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
fi fi
$(DFU_PROGRAMMER) $(MCU) reset $(DFU_PROGRAMMER) $(MCU) reset
avrdude: $(BUILD_DIR)/$(TARGET).hex avrdude: $(BUILD_DIR)/$(TARGET).hex check-size
if grep -q -s Microsoft /proc/version; then \ if grep -q -s Microsoft /proc/version; then \
echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \ echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \
else \ else \

View File

@ -6,6 +6,7 @@
#include <avr/wdt.h> #include <avr/wdt.h>
#include <util/delay.h> #include <util/delay.h>
#include "bootloader.h" #include "bootloader.h"
#include <avr/boot.h>
#ifdef PROTOCOL_LUFA #ifdef PROTOCOL_LUFA
#include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/USB.h>
@ -56,14 +57,17 @@
* | Bootloader | 512B | Bootloader | 1KB * | Bootloader | 512B | Bootloader | 1KB
* 0x7FFF +---------------+ 0x1FFFF +---------------+ * 0x7FFF +---------------+ 0x1FFFF +---------------+
*/ */
#ifndef BOOTLOADER_SIZE
#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h.
#define BOOTLOADER_SIZE 4096
#endif
#define FLASH_SIZE (FLASHEND + 1L) #define FLASH_SIZE (FLASHEND + 1L)
#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE)
#if !defined(BOOTLOADER_SIZE)
uint16_t bootloader_start;
#endif
#define BOOT_SIZE_256 0b110
#define BOOT_SIZE_512 0b100
#define BOOT_SIZE_1024 0b010
#define BOOT_SIZE_2048 0b000
/* /*
* Entering the Bootloader via Software * Entering the Bootloader via Software
@ -74,34 +78,62 @@ uint32_t reset_key __attribute__ ((section (".noinit")));
/* initialize MCU status by watchdog reset */ /* initialize MCU status by watchdog reset */
void bootloader_jump(void) { void bootloader_jump(void) {
#ifndef CATERINA_BOOTLOADER
#ifdef PROTOCOL_LUFA #if !defined(BOOTLOADER_SIZE)
USB_Disable(); uint8_t high_fuse = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS);
cli();
_delay_ms(2000); if (high_fuse & BOOT_SIZE_256) {
bootloader_start = (FLASH_SIZE - 512) >> 1;
} else if (high_fuse & BOOT_SIZE_512) {
bootloader_start = (FLASH_SIZE - 1024) >> 1;
} else if (high_fuse & BOOT_SIZE_1024) {
bootloader_start = (FLASH_SIZE - 2048) >> 1;
} else {
bootloader_start = (FLASH_SIZE - 4096) >> 1;
}
#endif #endif
#ifdef PROTOCOL_PJRC // Something like this might work, but it compiled larger than the block above
// bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1));
#if defined(BOOTLOADER_HALFKAY)
// http://www.pjrc.com/teensy/jump_to_bootloader.html
cli(); cli();
// disable watchdog, if enabled (it's not)
// disable all peripherals
// a shutdown call might make sense here
UDCON = 1; UDCON = 1;
USBCON = (1<<FRZCLK); USBCON = (1<<FRZCLK); // disable USB
UCSR1B = 0; UCSR1B = 0;
_delay_ms(5); _delay_ms(5);
#if defined(__AVR_AT90USB162__) // Teensy 1.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
DDRB = 0; DDRC = 0; DDRD = 0;
PORTB = 0; PORTC = 0; PORTD = 0;
asm volatile("jmp 0x3E00");
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0x7E00");
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0xFC00");
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0x1FC00");
#endif #endif
#ifdef BOOTLOADHID_BOOTLOADER #elif defined(BOOTLOADER_CATERINA)
// force bootloadHID to stay in bootloader mode, so that it waits
// for a new firmware to be flashed
eeprom_write_byte((uint8_t *)1, 0x00);
#endif
// watchdog reset
reset_key = BOOTLOADER_RESET_KEY;
wdt_enable(WDTO_250MS);
for (;;);
#else
// this block may be optional // this block may be optional
// TODO: figure it out // TODO: figure it out
@ -118,7 +150,27 @@ void bootloader_jump(void) {
while(1) {} // wait for watchdog timer to trigger while(1) {} // wait for watchdog timer to trigger
#else // Assume remaining boards are DFU, even if the flag isn't set
#ifndef __AVR_ATmega32A__ // no USB - maybe BOOTLOADER_BOOTLOADHID instead though?
UDCON = 1;
USBCON = (1<<FRZCLK); // disable USB
UCSR1B = 0;
_delay_ms(5); // 5 seems to work fine
#endif #endif
#ifdef BOOTLOADER_BOOTLOADHID
// force bootloadHID to stay in bootloader mode, so that it waits
// for a new firmware to be flashed
eeprom_write_byte((uint8_t *)1, 0x00);
#endif
// watchdog reset
reset_key = BOOTLOADER_RESET_KEY;
wdt_enable(WDTO_250MS);
for (;;);
#endif
} }
#ifdef __AVR_ATmega32A__ #ifdef __AVR_ATmega32A__
@ -130,6 +182,7 @@ void bootloader_jump(void) {
void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3"))); void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
void bootloader_jump_after_watchdog_reset(void) void bootloader_jump_after_watchdog_reset(void)
{ {
#ifndef BOOTLOADER_HALFKAY
if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
reset_key = 0; reset_key = 0;
@ -140,61 +193,22 @@ void bootloader_jump_after_watchdog_reset(void)
MCUSR &= ~(1<<WDRF); MCUSR &= ~(1<<WDRF);
wdt_disable(); wdt_disable();
// This is compled into 'icall', address should be in word unit, not byte. // This is compled into 'icall', address should be in word unit, not byte.
((void (*)(void))(BOOTLOADER_START/2))(); #ifdef BOOTLOADER_SIZE
((void (*)(void))( (FLASH_SIZE - BOOTLOADER_SIZE) >> 1))();
#else
asm("ijmp" :: "z" (bootloader_start));
#endif
} }
#endif
} }
#if 0 #if 0
/* Jumping To The Bootloader
* http://www.pjrc.com/teensy/jump_to_bootloader.html
*
* This method doen't work when using LUFA. idk why.
* - needs to initialize more regisers or interrupt setting?
*/
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
USB_Disable();
cli();
_delay_ms(2000);
#endif
#ifdef PROTOCOL_PJRC
cli();
UDCON = 1;
USBCON = (1<<FRZCLK);
UCSR1B = 0;
_delay_ms(5);
#endif
/* /*
* Initialize * USBaspLoader - I'm not sure if this is used at all in any projects
*/ * would love to support it if it is -Jack
#if defined(__AVR_AT90USB162__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
DDRB = 0; DDRC = 0; DDRD = 0;
PORTB = 0; PORTC = 0; PORTD = 0;
#elif defined(__AVR_ATmega32U4__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB646__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB1286__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#endif
/*
* USBaspLoader
*/ */
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
// This makes custom USBasploader come up. // This makes custom USBasploader come up.

View File

@ -0,0 +1,20 @@
// Copyright 2017 Jack Humbert
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <avr/io.h>
#include <avr/boot.h>
// this is not valid C - it's for computing the size available on the chip
AVR_SIZE: FLASHEND + 1 - BOOTLOADER_SIZE

View File

@ -216,6 +216,9 @@ MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
elf: $(BUILD_DIR)/$(TARGET).elf elf: $(BUILD_DIR)/$(TARGET).elf
hex: $(BUILD_DIR)/$(TARGET).hex hex: $(BUILD_DIR)/$(TARGET).hex
cphex: hex
$(SILENT) || printf "Copying $(TARGET).hex to qmk_firmware folder" | $(AWK_CMD)
$(COPY) $(BUILD_DIR)/$(TARGET).hex $(TARGET).hex && $(PRINT_OK)
eep: $(BUILD_DIR)/$(TARGET).eep eep: $(BUILD_DIR)/$(TARGET).eep
lss: $(BUILD_DIR)/$(TARGET).lss lss: $(BUILD_DIR)/$(TARGET).lss
sym: $(BUILD_DIR)/$(TARGET).sym sym: $(BUILD_DIR)/$(TARGET).sym
@ -223,19 +226,17 @@ LIBNAME=lib$(TARGET).a
lib: $(LIBNAME) lib: $(LIBNAME)
# Display size of file. # Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf #ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf
sizebefore: sizebefore:
@if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \ @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
2>/dev/null; $(SECHO); fi 2>/dev/null; $(SECHO); fi
sizeafter: $(BUILD_DIR)/$(TARGET).hex sizeafter: $(BUILD_DIR)/$(TARGET).hex
@if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \ @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
2>/dev/null; $(SECHO); fi 2>/dev/null; $(SECHO); fi
# test file sizes eventually
# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
# Display compiler version information. # Display compiler version information.
gccversion : gccversion :
@ -249,8 +250,6 @@ gccversion :
@if $(AUTOGEN); then \ @if $(AUTOGEN); then \
$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(TARGET).hex\n"; \ $(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(TARGET).hex\n"; \
$(COPY) $@ $(KEYMAP_PATH)/$(TARGET).hex; \ $(COPY) $@ $(KEYMAP_PATH)/$(TARGET).hex; \
else \
$(COPY) $@ $(TARGET).hex; \
fi fi
%.eep: %.elf %.eep: %.elf
@ -371,6 +370,14 @@ show_path:
@echo SRC=$(SRC) @echo SRC=$(SRC)
@echo OBJ=$(OBJ) @echo OBJ=$(OBJ)
check-size:
$(eval MAX_SIZE=$(shell n=`avr-gcc -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | grep -oP "(?<=AVR_SIZE: ).+"`; echo $$(($$n)) || echo 0))
$(eval CURRENT_SIZE=$(shell if [ -f $(BUILD_DIR)/$(TARGET).hex ]; then $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(AWK) 'NR==2 {print $$4}'; else printf 0; fi))
if [ $(MAX_SIZE) -gt 0 ] && [ $(CURRENT_SIZE) -gt 0 ]; then \
$(SILENT) || printf "$(MSG_CHECK_FILESIZE)" | $(AWK_CMD); \
if [ $(CURRENT_SIZE) -gt $(MAX_SIZE) ]; then $(PRINT_WARNING_PLAIN); $(SILENT) || printf " * $(MSG_FILE_TOO_BIG)" ; else $(PRINT_OK); $(SILENT) || printf " * $(MSG_FILE_JUST_RIGHT)"; fi \
fi
# Create build directory # Create build directory
$(shell mkdir -p $(BUILD_DIR) 2>/dev/null) $(shell mkdir -p $(BUILD_DIR) 2>/dev/null)

View File

@ -428,7 +428,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
case KC_MAKE: case KC_MAKE:
if (!record->event.pressed) { if (!record->event.pressed) {
SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP); SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
#ifndef CATERINA_BOOTLOADER #ifndef BOOTLOADER_CATERINA
SEND_STRING(":teensy "); SEND_STRING(":teensy ");
#else #else
SEND_STRING(" "); SEND_STRING(" ");

View File

@ -43,7 +43,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
case KC_MAKE: case KC_MAKE:
if (!record->event.pressed) { if (!record->event.pressed) {
SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP); SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
#ifndef CATERINA_BOOTLOADER #ifndef BOOTLOADER_CATERINA
SEND_STRING(":teensy "); SEND_STRING(":teensy ");
#else #else
SEND_STRING(" "); SEND_STRING(" ");