From 97e7486d4c8818f4a6b3e619729d6f4f6524a7d1 Mon Sep 17 00:00:00 2001 From: ofples Date: Fri, 25 Nov 2016 12:10:44 +0200 Subject: [PATCH] Added documentation for PS/2 mouse in readme --- readme.md | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/readme.md b/readme.md index 8615b48d5..0157b9072 100644 --- a/readme.md +++ b/readme.md @@ -1157,6 +1157,45 @@ The firmware supports 5 different light effects, and the color (hue, saturation, Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20. +## PS/2 Mouse Support + +Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device. +In order to do this you must first enable the option in your Makefile. + + PS2_MOUSE_ENABLE = yes + +Then, decide whether to use interrupts (better if your microcontroller supports them) or busywait, and enable the relevant option. + + PS2_USE_INT = yes + // PS2_USE_BUSYWAIT = yes + +If you're using a teensy and have hooked up the clock on your PS/2 device to D1 and the data to D0, you're all set. +Otherwise, you will need to update the following defines in your `config.h`: + + #define PS2_CLOCK_PORT PORTD + #define PS2_CLOCK_PIN PIND + #define PS2_CLOCK_DDR DDRD + #define PS2_CLOCK_BIT 1 + + #define PS2_DATA_PORT PORTD + #define PS2_DATA_PIN PIND + #define PS2_DATA_DDR DDRD + #define PS2_DATA_BIT 0 + +And with `PS2_USE_INT` also define these macros: + + #define PS2_INT_INIT() do { \ + EICRA |= ((1<