yohan/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[Keyboard] Update Gergo to use newer Ergodox Matrix code (#5703)

Browse Source 
* [Keyboard] Update Gergo to use newer Ergodox Matrix code

And update layout macros to be correct

* Almost forgot the json file

* Remove board specific defines for i2c timeout
This commit is contained in:
Drashna Jaelre 2019-04-26 17:24:00 -07:00 committed by MechMerlin
parent ffd10d4116
commit 8faee5c9f6
12 changed files with 313 additions and 449 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
keyboards/gergo/gergo.c
View File

@ -43,20 +43,20 @@ uint8_t init_mcp23018(void) {
// - unused : input : 1
// - input : input : 1
// - driving : output : 0
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b10000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(IODIRA, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b10000000, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT); if (mcp23018_status) goto out;
i2c_stop();
// set pull-up
// - unused : on : 1
// - input : on : 1
// - driving : off : 0
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b10000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPPUA, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b10000000, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT); if (mcp23018_status) goto out;
out:
i2c_stop();

18
keyboards/gergo/gergo.h
View File

@ -1,14 +1,14 @@
#pragma once
#include <util/delay.h>
#include "quantum.h"
#include <stdint.h>
#include <stdbool.h>
#include "quantum.h"
#include "i2c_master.h"
#include "matrix.h"
#include <util/delay.h>
extern i2c_status_t mcp23018_status;
#define ERGODOX_EZ_I2C_TIMEOUT 1000
#define I2C_TIMEOUT 1000
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz 0x00
@ -26,18 +26,14 @@ extern i2c_status_t mcp23018_status;
#define OLATA 0x14 // output latch register
#define OLATB 0x15
void init_ergodox(void);
uint8_t init_mcp23018(void);
/* ---------- LEFT HAND ----------- ---------- RIGHT HAND ---------- */
#define LAYOUT_GERGO( \
#define LAYOUT_gergo( \
L00,L01,L02,L03,L04,L05, R00,R01,R02,R03,R04,R05, \
L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16, \
L20,L21,L22,L23,L24,L25,L26, R20,R21,R22,R23,R24,R25,R26, \
L31,L32, R33,R34, \
L30, R30, \
L33,L34, R31,R32) \
\
L20,L21,L22,L23,L24,L25,L26,L30, R30,R20,R21,R22,R23,R24,R25,R26, \
L31,L32,L33,L34, R31,R32,R33,R34) \
/* matrix positions */ \
{ \
{ KC_NO, L16, L26, L30}, \

178
keyboards/gergo/i2cmaster.h
View File

@ -1,178 +0,0 @@
#ifndef _I2CMASTER_H
#define _I2CMASTER_H 1
/*************************************************************************
* Title: C include file for the I2C master interface
* (i2cmaster.S or twimaster.c)
* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $
* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
* Target: any AVR device
* Usage: see Doxygen manual
**************************************************************************/
#ifdef DOXYGEN
/**
@defgroup pfleury_ic2master I2C Master library
@code #include <i2cmaster.h> @endcode
@brief I2C (TWI) Master Software Library
Basic routines for communicating with I2C slave devices. This single master
implementation is limited to one bus master on the I2C bus.
This I2c library is implemented as a compact assembler software implementation of the I2C protocol
which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c).
Since the API for these two implementations is exactly the same, an application can be linked either against the
software I2C implementation or the hardware I2C implementation.
Use 4.7k pull-up resistor on the SDA and SCL pin.
Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module
i2cmaster.S to your target when using the software I2C implementation !
Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion.
@note
The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted
to GNU assembler and AVR-GCC C call interface.
Replaced the incorrect quarter period delays found in AVR300 with
half period delays.
@author Peter Fleury pfleury@gmx.ch http://jump.to/fleury
@par API Usage Example
The following code shows typical usage of this library, see example test_i2cmaster.c
@code
#include <i2cmaster.h>
#define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet
int main(void)
{
unsigned char ret;
i2c_init(); // initialize I2C library
// write 0x75 to EEPROM address 5 (Byte Write)
i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode
i2c_write(0x05); // write address = 5
i2c_write(0x75); // write value 0x75 to EEPROM
i2c_stop(); // set stop conditon = release bus
// read previously written value back from EEPROM address 5
i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode
i2c_write(0x05); // write address = 5
i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode
ret = i2c_readNak(); // read one byte from EEPROM
i2c_stop();
for(;;);
}
@endcode
*/
#endif /* DOXYGEN */
/**@{*/
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
#endif
#include <avr/io.h>
/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */
#define I2C_READ 1
/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */
#define I2C_WRITE 0
/**
@brief initialize the I2C master interace. Need to be called only once
@param void
@return none
*/
void i2c_init(void);
/**
@brief Terminates the data transfer and releases the I2C bus
@param void
@return none
*/
void i2c_stop(void);
/**
@brief Issues a start condition and sends address and transfer direction
@param addr address and transfer direction of I2C device
@retval 0 device accessible
@retval 1 failed to access device
*/
unsigned char i2c_start(unsigned char addr);
/**
@brief Issues a repeated start condition and sends address and transfer direction
@param addr address and transfer direction of I2C device
@retval 0 device accessible
@retval 1 failed to access device
*/
unsigned char i2c_rep_start(unsigned char addr);
/**
@brief Issues a start condition and sends address and transfer direction
If device is busy, use ack polling to wait until device ready
@param addr address and transfer direction of I2C device
@return none
*/
void i2c_start_wait(unsigned char addr);
/**
@brief Send one byte to I2C device
@param data byte to be transfered
@retval 0 write successful
@retval 1 write failed
*/
unsigned char i2c_write(unsigned char data);
/**
@brief read one byte from the I2C device, request more data from device
@return byte read from I2C device
*/
unsigned char i2c_readAck(void);
/**
@brief read one byte from the I2C device, read is followed by a stop condition
@return byte read from I2C device
*/
unsigned char i2c_readNak(void);
/**
@brief read one byte from the I2C device
Implemented as a macro, which calls either i2c_readAck or i2c_readNak
@param ack 1 send ack, request more data from device<br>
0 send nak, read is followed by a stop condition
@return byte read from I2C device
*/
unsigned char i2c_read(unsigned char ack);
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
/**@}*/
#endif

42
keyboards/gergo/info.json
View File

@ -5,7 +5,7 @@
"keyboard_name": "Gergo",
"url": "http://gboards.ca",
"layouts": {
"LAYOUT_GERGO": {
"LAYOUT_gergo": {
"layout": [
{
"label": "L00",
@ -180,6 +180,16 @@
"x": 6.5,
"y": 1.75
},
{
"label": "L30",
"x": 8.25,
"y": 2.75
},
{
"label": "R30",
"x": 10.25,
"y": 2.75
},
{
"h": 1.5,
"label": "R20",
@ -227,26 +237,6 @@
"x": 6,
"y": 3.63
},
{
"label": "R33",
"x": 12.5,
"y": 3.63
},
{
"label": "R34",
"x": 13.75,
"y": 3.25
},
{
"label": "L30",
"x": 8.25,
"y": 2.75
},
{
"label": "R30",
"x": 10.25,
"y": 2.75
},
{
"h": 2,
"label": "L33",
@ -270,6 +260,16 @@
"label": "R32",
"x": 11.25,
"y": 3.75
},
{
"label": "R33",
"x": 12.5,
"y": 3.63
},
{
"label": "R34",
"x": 13.75,
"y": 3.25
}
]
}

3
keyboards/gergo/keymaps/default/config.h Normal file
View File

@ -0,0 +1,3 @@
#pragma once
#define IGNORE_MOD_TAP_INTERRUPT

75
keyboards/gergo/keymaps/default/keymap.c
View File

@ -1,4 +1,4 @@
/* Good on you for modifying your layout! if you don't have
/* Good on you for modifying your layout! if you don't have
* time to read the QMK docs, a list of keycodes can be found at
*
* https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
@ -8,7 +8,6 @@
#include QMK_KEYBOARD_H
#define IGNORE_MOD_TAP_INTERRUPT
#define BASE 0 // default layer
#define SYMB 1 // symbols
#define NUMB 2 // numbers/motion
@ -41,15 +40,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | | | | | |
* `--------------' `--------------'
*/
[BASE] = LAYOUT_GERGO(
LT(NUMB, KC_ESC), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PIPE,
MT(MOD_LCTL, KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_BTN2, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BTN1, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), KC_TAB, KC_BSPC,
KC_BTN3, KC_PGDN,
LT(SYMB, KC_SPC), LT(NUMB, KC_ESC), LT(SYMB, KC_ENT), LT(NUMB, KC_SPC)),
[BASE] = LAYOUT_gergo(
LT(NUMB, KC_ESC), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PIPE,
MT(MOD_LCTL, KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_BTN2, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BTN1, KC_BTN3, KC_PGDN, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), LT(SYMB, KC_SPC), LT(NUMB, KC_ESC), LT(SYMB, KC_ENT), LT(NUMB, KC_SPC), KC_TAB, KC_BSPC
),
/* Keymap 1: Symbols layer
*
* ,-------------------------------------------. ,-------------------------------------------.
@ -70,14 +66,12 @@ KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BTN1, KC_BSP
* | | | | | |
* `--------------' `--------------'
*/
[SYMB] = LAYOUT_GERGO(
KC_TRNS, KC_EXLM, KC_AT, KC_LCBR,KC_RCBR, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
KC_TRNS, KC_HASH, KC_DLR, KC_LPRN,KC_RPRN, KC_GRV, KC_TRNS, KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
KC_TRNS, KC_TRNS, KC_PGUP, KC_DEL,
KC_TRNS, KC_TRNS,
KC_SCLN, KC_EQL, KC_EQL, KC_SCLN),
[SYMB] = LAYOUT_gergo(
KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_TRNS, KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
KC_TRNS, KC_TRNS, KC_SCLN, KC_EQL, KC_EQL, KC_SCLN, KC_PGUP, KC_DEL
),
/* Keymap 2: Pad/Function layer
*
* ,-------------------------------------------. ,-------------------------------------------.
@ -98,17 +92,15 @@ KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, KC_
* | | | | | |
* `--------------' `--------------'
*/
[NUMB] = LAYOUT_GERGO(
KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLD, KC_VOLU,
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
[NUMB] = LAYOUT_gergo(
KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLD, KC_VOLU,
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};
/* Keymap template
/* Keymap template
*
* ,-------------------------------------------. ,-------------------------------------------.
* | | | | | | | | | | | | | |
@ -127,25 +119,10 @@ KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, K
* | | | | | |
* | | | | | |
* `--------------' `--------------'
[SYMB] = LAYOUT_GERGO(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
[SYMB] = LAYOUT_gergo(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
*/
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
//uint8_t layer = biton32(layer_state);
biton32(layer_state);
};

119
keyboards/gergo/keymaps/drashna/keymap.c Normal file
View File

@ -0,0 +1,119 @@
/* Good on you for modifying your layout! if you don't have
* time to read the QMK docs, a list of keycodes can be found at
*
* https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
*
* There's also a template for adding new layers at the bottom of this file!
*/
#include QMK_KEYBOARD_H
#include "drashna.h"
// Blank template at the bottom
enum customKeycodes {
URL = 1
};
#define LAYOUT_gergo_wrapper(...) LAYOUT_gergo(__VA_ARGS__)
#define LAYOUT_gergo_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
) \
LAYOUT_gergo_wrapper( \
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_PIPE, \
KC_TAB, ALT_T(K11), K12, K13, K14, K15, _______, _______, K16, K17, K18, K19, K1A, RGUI_T(KC_QUOT), \
OS_LSFT, CTL_T(K21), K22, K23, K24, K25, _______, _______, _______, _______, K26, K27, K28, K29, CTL_T(K2A), OS_RSFT, \
_______, _______, KC_SPC, LT(_LOWER, KC_BSPC), LT(_RAISE, KC_DEL), KC_ENT, _______, _______ \
)
#define LAYOUT_gergo_base_wrapper(...) LAYOUT_gergo_base(__VA_ARGS__)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_gergo_base_wrapper(
_________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
_________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
_________________QWERTY_L3_________________, _________________QWERTY_R3_________________
),
[_COLEMAK] = LAYOUT_gergo_base_wrapper(
_________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
_________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
_________________COLEMAK_L3________________, _________________COLEMAK_R3________________
),
[_DVORAK] = LAYOUT_gergo_base_wrapper(
_________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
_________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
_________________DVORAK_L3_________________, _________________DVORAK_R3_________________
),
[_WORKMAN] = LAYOUT_gergo_base_wrapper(
_________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
_________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
_________________WORKMAN_L3________________, _________________WORKMAN_R3________________
),
[_NORMAN] = LAYOUT_gergo_base_wrapper(
_________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
_________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
_________________NORMAN_L3_________________, _________________NORMAN_R3_________________
),
[_MALTRON] = LAYOUT_gergo_base_wrapper(
_________________MALTRON_L1________________, _________________MALTRON_R1________________,
_________________MALTRON_L2________________, _________________MALTRON_R2________________,
_________________MALTRON_L3________________, _________________MALTRON_R3________________
),
[_EUCALYN] = LAYOUT_gergo_base_wrapper(
_________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
_________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
_________________EUCALYN_L3________________, _________________EUCALYN_R3________________
),
[_CARPLAX] = LAYOUT_gergo_base_wrapper(
_____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
_____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
_____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
),
[_MODS] = LAYOUT_gergo_wrapper(
_______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
_______, ___________________BLANK___________________, _______, _______, ___________________BLANK___________________, _______,
KC_LSFT, ___________________BLANK___________________, _______, _______, _______, _______, ___________________BLANK___________________, KC_RSFT,
_______, _______, _______, _______, _______, _______, _______, _______
),
[_LOWER] = LAYOUT_gergo_wrapper(
KC_F12, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11,
_______, _________________LOWER_L2__________________, _______, _______, _________________LOWER_R2__________________, KC_PIPE,
_______, _________________LOWER_L3__________________, _______, _______, _______, _______, _________________LOWER_R3__________________, _______,
_______, _______, _______, _______, _______, _______, _______, _______
),
[_RAISE] = LAYOUT_gergo_wrapper(
_______, _________________RAISE_L1__________________, _________________RAISE_R1__________________, _______,
_______, _________________RAISE_L2__________________, _______, _______, _________________RAISE_R2__________________, KC_BSLS,
_______, _________________RAISE_L3__________________, _______, _______, _______, _______, _________________RAISE_R3__________________, _______,
_______, _______, _______, _______, _______, _______, _______, _______
),
[_ADJUST] = LAYOUT_gergo_wrapper(
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
VRSN, _________________ADJUST_L2_________________, _______, KC_NUKE, _________________ADJUST_R2_________________, EEP_RST,
_______, _________________ADJUST_L3_________________, _______, _______, _______, _______, _________________ADJUST_R3_________________, TG_MODS,
_______, _______, _______, _______, _______, _______, _______, _______
),
};
/* Keymap template
[SYMB] = LAYOUT_gergo_wrapper(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______
),
*/

0
keyboards/gergo/keymaps/drashna/rules.mk Normal file
View File

3
keyboards/gergo/keymaps/germ/config.h Normal file
View File

@ -0,0 +1,3 @@
#pragma once
#define IGNORE_MOD_TAP_INTERRUPT

75
keyboards/gergo/keymaps/germ/keymap.c
View File

@ -1,4 +1,4 @@
/* Good on you for modifying your layout! if you don't have
/* Good on you for modifying your layout! if you don't have
* time to read the QMK docs, a list of keycodes can be found at
*
* https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
@ -8,7 +8,6 @@
#include QMK_KEYBOARD_H
#define IGNORE_MOD_TAP_INTERRUPT
#define BASE 0 // default layer
#define SYMB 1 // symbols
#define NUMB 2 // numbers/motion
@ -41,15 +40,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | | | | | |
* `--------------' `--------------'
*/
[BASE] = LAYOUT_GERGO(
LT(NUMB, KC_ESC), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PIPE,
MT(MOD_LCTL, KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_BTN2, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BTN1, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), KC_TAB, KC_BSPC,
KC_BTN3, KC_PGDN,
LT(SYMB, KC_SPC), LT(NUMB, KC_ESC), LT(SYMB, KC_ENT), LT(NUMB, KC_SPC)),
[BASE] = LAYOUT_gergo(
LT(NUMB, KC_ESC), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PIPE,
MT(MOD_LCTL, KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_BTN2, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BTN1, KC_BTN3, KC_PGDN, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), LT(SYMB, KC_SPC), LT(NUMB, KC_ESC), LT(SYMB, KC_ENT), LT(NUMB, KC_SPC), KC_TAB, KC_BSPC
),
/* Keymap 1: Symbols layer
*
* ,-------------------------------------------. ,-------------------------------------------.
@ -70,14 +66,12 @@ KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BTN1, KC_BSP
* | | | | | |
* `--------------' `--------------'
*/
[SYMB] = LAYOUT_GERGO(
KC_TRNS, KC_EXLM, KC_AT, KC_LCBR,KC_RCBR, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
KC_TRNS, KC_HASH, KC_DLR, KC_LPRN,KC_RPRN, KC_GRV, KC_TRNS, KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
KC_TRNS, KC_TRNS, KC_PGUP, KC_DEL,
KC_TRNS, KC_TRNS,
KC_SCLN, KC_EQL, KC_EQL, KC_SCLN),
[SYMB] = LAYOUT_gergo(
KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_TRNS, KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
KC_TRNS, KC_TRNS, KC_SCLN, KC_EQL, KC_EQL, KC_SCLN, KC_PGUP, KC_DEL
),
/* Keymap 2: Pad/Function layer
*
* ,-------------------------------------------. ,-------------------------------------------.
@ -98,17 +92,15 @@ KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, KC_
* | | | | | |
* `--------------' `--------------'
*/
[NUMB] = LAYOUT_GERGO(
KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLD, KC_VOLU,
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
[NUMB] = LAYOUT_gergo(
KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLD, KC_VOLU,
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};
/* Keymap template
/* Keymap template
*
* ,-------------------------------------------. ,-------------------------------------------.
* | | | | | | | | | | | | | |
@ -127,25 +119,10 @@ KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, K
* | | | | | |
* | | | | | |
* `--------------' `--------------'
[SYMB] = LAYOUT_GERGO(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
[SYMB] = LAYOUT_gergo(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
*/
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
//uint8_t layer = biton32(layer_state);
biton32(layer_state);
};

231
keyboards/gergo/matrix.c
View File

@ -29,10 +29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "print.h"
#include "debug.h"
#include "util.h"
#include "debounce.h"
#include "pointing_device.h"
#include QMK_KEYBOARD_H
#ifdef DEBUG_MATRIX_SCAN_RATE
#include "timer.h"
# include "timer.h"
#endif
#ifdef BALLER
@ -117,12 +118,11 @@ static matrix_row_t raw_matrix[MATRIX_ROWS];
// Debouncing: store for each key the number of scans until it's eligible to
// change. When scanning the matrix, ignore any changes in keys that have
// already changed in the last DEBOUNCE scans.
static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS];
static matrix_row_t read_cols(uint8_t row);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void enableInterrupts(void);
static uint8_t mcp23018_reset_loop;
@ -134,11 +134,9 @@ uint32_t matrix_scan_count;
#endif
__attribute__ ((weak))
void matrix_init_user(void) {}
__attribute__ ((weak)) void matrix_init_user(void) {}
__attribute__ ((weak))
void matrix_scan_user(void) {}
__attribute__ ((weak)) void matrix_scan_user(void) {}
__attribute__ ((weak))
void matrix_init_kb(void) {
@ -150,39 +148,28 @@ void matrix_scan_kb(void) {
matrix_scan_user();
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
void matrix_init(void)
{
void matrix_init(void) {
// initialize row and col
mcp23018_status = init_mcp23018();
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
raw_matrix[i] = 0;
for (uint8_t j=0; j < MATRIX_COLS; ++j) {
debounce_matrix[i * MATRIX_COLS + j] = 0;
}
}
// initialize matrix state: all keys off
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
raw_matrix[i] = 0;
}
#ifdef DEBUG_MATRIX_SCAN_RATE
matrix_timer = timer_read32();
matrix_timer = timer_read32();
matrix_scan_count = 0;
#endif
debounce_init(MATRIX_ROWS);
matrix_init_quantum();
}
@ -198,130 +185,120 @@ void matrix_power_up(void) {
}
#ifdef DEBUG_MATRIX_SCAN_RATE
matrix_timer = timer_read32();
matrix_timer = timer_read32();
matrix_scan_count = 0;
#endif
}
// Returns a matrix_row_t whose bits are set if the corresponding key should be
// eligible to change in this scan.
matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
matrix_row_t result = 0;
matrix_row_t change = rawcols ^ raw_matrix[row];
raw_matrix[row] = rawcols;
for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
if (debounce_matrix[row * MATRIX_COLS + i]) {
--debounce_matrix[row * MATRIX_COLS + i];
} else {
result |= (1 << i);
}
if (change & (1 << i)) {
debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
}
// Reads and stores a row, returning
// whether a change occurred.
static inline bool store_raw_matrix_row(uint8_t index) {
matrix_row_t temp = read_cols(index);
if (raw_matrix[index] != temp) {
raw_matrix[index] = temp;
return true;
}
return result;
return false;
}
matrix_row_t debounce_read_cols(uint8_t row) {
// Read the row without debouncing filtering and store it for later usage.
matrix_row_t cols = read_cols(row);
// Get the Debounce mask.
matrix_row_t mask = debounce_mask(cols, row);
// debounce the row and return the result.
return (cols & mask) | (matrix[row] & ~mask);;
}
uint8_t matrix_scan(void)
{
// TODO: Find what is trashing interrupts
enableInterrupts();
// First we handle the mouse inputs
#ifdef BALLER
uint8_t pBtn = PINE & TRKBTN;
uint8_t matrix_scan(void) {
// TODO: Find what is trashing interrupts
enableInterrupts();
#ifdef DEBUG_BALLER
// Compare to previous, mod report
if (tbUpCnt + tbDnCnt + tbLtCnt + tbRtCnt != 0)
xprintf("U: %d D: %d L: %d R: %d B: %d\n", tbUpCnt, tbDnCnt, tbLtCnt, tbRtCnt, (trkBtnState >> 6));
#endif
// First we handle the mouse inputs
#ifdef BALLER
uint8_t pBtn = PINE & TRKBTN;
// Modify the report
report_mouse_t pRprt = pointing_device_get_report();
#ifdef DEBUG_BALLER
// Compare to previous, mod report
if (tbUpCnt + tbDnCnt + tbLtCnt + tbRtCnt != 0)
xprintf("U: %d D: %d L: %d R: %d B: %d\n", tbUpCnt, tbDnCnt, tbLtCnt, tbRtCnt, (trkBtnState >> 6));
#endif
// Scroll by default, move on layer
if (layer_state == 0) {
// Modify the report
report_mouse_t pRprt = pointing_device_get_report();
// Scroll by default, move on layer
if (layer_state == 0) {
pRprt.h += tbLtCnt * SCROLLSTEP; tbLtCnt = 0;
pRprt.h -= tbRtCnt * SCROLLSTEP; tbRtCnt = 0;
pRprt.v -= tbUpCnt * SCROLLSTEP; tbUpCnt = 0;
pRprt.v += tbDnCnt * SCROLLSTEP; tbDnCnt = 0;
} else {
} else {
pRprt.x -= tbLtCnt * TRKSTEP * (layer_state - 1); tbLtCnt = 0;
pRprt.x += tbRtCnt * TRKSTEP * (layer_state - 1); tbRtCnt = 0;
pRprt.y -= tbUpCnt * TRKSTEP * (layer_state - 1); tbUpCnt = 0;
pRprt.y += tbDnCnt * TRKSTEP * (layer_state - 1); tbDnCnt = 0;
}
}
#ifdef DEBUG_BALLER
if (pRprt.x != 0 || pRprt.y != 0)
xprintf("X: %d Y: %d\n", pRprt.x, pRprt.y);
#endif
#ifdef DEBUG_BALLER
if (pRprt.x != 0 || pRprt.y != 0)
xprintf("X: %d Y: %d\n", pRprt.x, pRprt.y);
#endif
if ((pBtn != trkBtnState) && ((pBtn >> 6) == 0)) pRprt.buttons |= MOUSE_BTN1;
if ((pBtn != trkBtnState) && ((pBtn >> 6) == 1)) pRprt.buttons &= ~MOUSE_BTN1;
if ((pBtn != trkBtnState) && ((pBtn >> 6) == 0)) pRprt.buttons |= MOUSE_BTN1;
if ((pBtn != trkBtnState) && ((pBtn >> 6) == 1)) pRprt.buttons &= ~MOUSE_BTN1;
// Save state, push update
if (pRprt.x != 0 || pRprt.y != 0 || pRprt.h != 0 || pRprt.v != 0 || (trkBtnState != pBtn))
pointing_device_set_report(pRprt);
// Save state, push update
if (pRprt.x != 0 || pRprt.y != 0 || pRprt.h != 0 || pRprt.v != 0 || (trkBtnState != pBtn))
pointing_device_set_report(pRprt);
trkBtnState = pBtn;
#endif
trkBtnState = pBtn;
#endif
// Then the keyboard
if (mcp23018_status) { // if there was an error
if (++mcp23018_reset_loop == 0) {
// if (++mcp23018_reset_loop >= 1300) {
// since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
// this will be approx bit more frequent than once per second
print("trying to reset mcp23018\n");
mcp23018_status = init_mcp23018();
if (mcp23018_status) {
print("left side not responding\n");
} else {
print("left side attached\n");
}
}
}
// Then the keyboard
if (mcp23018_status) { // if there was an error
if (++mcp23018_reset_loop == 0) {
// if (++mcp23018_reset_loop >= 1300) {
// since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
// this will be approx bit more frequent than once per second
print("trying to reset mcp23018\n");
mcp23018_status = init_mcp23018();
if (mcp23018_status) {
print("left side not responding\n");
} else {
print("left side attached\n");
}
}
}
#ifdef DEBUG_MATRIX_SCAN_RATE
matrix_scan_count++;
uint32_t timer_now = timer_read32();
if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) {
print("matrix scan frequency: ");
pdec(matrix_scan_count);
print("\n");
matrix_timer = timer_now;
matrix_timer = timer_now;
matrix_scan_count = 0;
}
#endif
bool changed = false;
for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
select_row(i);
// and select on left hand
select_row(i + MATRIX_ROWS_PER_SIDE);
// select rows from left and right hands
uint8_t left_index = i;
uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
select_row(left_index);
select_row(right_index);
// we don't need a 30us delay anymore, because selecting a
// left-hand row requires more than 30us for i2c.
// grab cols from left hand
matrix[i] = debounce_read_cols(i);
// grab cols from right hand
matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
changed |= store_raw_matrix_row(left_index);
changed |= store_raw_matrix_row(right_index);
unselect_rows();
}
debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
matrix_scan_quantum();
enableInterrupts();
#ifdef DEBUG_MATRIX
@ -338,20 +315,11 @@ bool matrix_is_modified(void) // deprecated and evidently not called.
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
void matrix_print(void)
{
void matrix_print(void) {
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
@ -360,8 +328,7 @@ void matrix_print(void)
}
}
uint8_t matrix_key_count(void)
{
uint8_t matrix_key_count(void) {
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
@ -370,8 +337,7 @@ uint8_t matrix_key_count(void)
}
// Remember this means ROWS
static void init_cols(void)
{
static void init_cols(void) {
// init on mcp23018
// not needed, already done as part of init_mcp23018()
@ -380,17 +346,16 @@ static void init_cols(void)
PORTF |= FMASK;
}
static matrix_row_t read_cols(uint8_t row)
{
static matrix_row_t read_cols(uint8_t row) {
if (row < 7) {
if (mcp23018_status) { // if there was an error
return 0;
} else {
uint8_t data = 0;
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status < 0) goto out;
mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOB, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_read_nack(I2C_TIMEOUT); if (mcp23018_status < 0) goto out;
data = ~((uint8_t)mcp23018_status);
mcp23018_status = I2C_STATUS_SUCCESS;
out:
@ -440,9 +405,9 @@ static void select_row(uint8_t row)
// select on mcp23018
if (mcp23018_status) { // do nothing on error
} else { // set active row low : 0 // set other rows hi-Z : 1
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0xFF & ~(1<<row), ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOA, I2C_TIMEOUT); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0xFF & ~(1<<row), I2C_TIMEOUT); if (mcp23018_status) goto out;
out:
i2c_stop();
}

2
keyboards/gergo/rules.mk
View File

@ -18,3 +18,5 @@ POINTING_DEVICE_ENABLE = yes
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes
COMMAND_ENABLE = yes
DEBOUNCE_TYPE = eager_pr