yohan/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency

Browse Source
This commit is contained in:
Joe Wasson 2018-03-11 14:07:02 -07:00 committed by Jack Humbert
parent 687c7070a1
commit 7230923b05
28 changed files with 45 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/feature_swap_hands.md
View File

@ -1,6 +1,6 @@
# Swap-Hands Action
The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `ONEHAND_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `SWAP_HANDS_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
## Configuration

2
keyboards/ergo42/ergo42.c
View File

@ -1,6 +1,6 @@
#include "ergo42.h"
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

4
keyboards/ergodone/rules.mk
View File

@ -5,7 +5,7 @@
#
# make clean = Clean out built project files.
#
# That's pretty much all you need. To compile, always go make clean,
# That's pretty much all you need. To compile, always go make clean,
# followed by make.
#
# For advanced users only:
@ -88,7 +88,7 @@ FADING_LED_ENABLE = no # Enable fading backlight
BREATHING_LED_ENABLE = no # Enable breathing backlight
LEDMAP_ENABLE = no # Enable LED mapping
LEDMAP_IN_EEPROM_ENABLE = no # Read LED mapping from eeprom
ONEHAND_ENABLE = no # Disable Onehand
SWAP_HANDS_ENABLE = no # Disable Onehand
RGBLIGHT_ENABLE = no
MIDI_ENABLE = no

4
keyboards/ergodox_ez/ergodox_ez.c
View File

@ -100,7 +100,7 @@ void ergodox_blink_all_leds(void)
mcp23018_status = ergodox_left_leds_update();
}
#endif
//ergodox_led_all_on();
//_delay_ms(333);
ergodox_led_all_off();
@ -185,7 +185,7 @@ uint8_t ergodox_left_leds_update(void) {
#endif
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
// swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

2
keyboards/ergodox_ez/keymaps/bepo_tm_style/rules.mk
View File

@ -2,7 +2,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - for issues, see github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard
SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
KEY_LOCK_ENABLE = yes # Enable the KC_LOCK key
TAP_DANCE_ENABLE = yes # Enable the tap dance feature.
CONSOLE_ENABLE = yes # Console for debug

8
keyboards/ergodox_ez/rules.mk
View File

@ -5,7 +5,7 @@
#
# make clean = Clean out built project files.
#
# That's pretty much all you need. To compile, always go make clean,
# That's pretty much all you need. To compile, always go make clean,
# followed by make.
#
# For advanced users only:
@ -56,7 +56,7 @@ F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = halfkay
@ -79,9 +79,9 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard
SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
SLEEP_LED_ENABLE = no
API_SYSEX_ENABLE = no
RGBLIGHT_ENABLE = yes
LAYOUTS = ergodox
LAYOUTS = ergodox

2
keyboards/ergodox_infinity/ergodox_infinity.c
View File

@ -174,7 +174,7 @@ __attribute__ ((weak))
void ergodox_right_led_3_set(uint8_t n) {
}
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}},

2
keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk
View File

@ -67,7 +67,7 @@ CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard
SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard
STENO_ENABLE = yes #enable plover steno mode
CUSTOM_MATRIX = yes # Custom matrix file
SERIAL_LINK_ENABLE = yes

6
keyboards/ergodox_infinity/rules.mk
View File

@ -67,7 +67,7 @@ CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard
SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
CUSTOM_MATRIX = yes # Custom matrix file
SERIAL_LINK_ENABLE = yes
@ -79,11 +79,11 @@ MIDI_ENABLE = no
RGBLIGHT_ENABLE = no
LCD_DRIVER = st7565
LCD_WIDTH = 128
LCD_WIDTH = 128
LCD_HEIGHT = 32
LED_DRIVER = is31fl3731c
LED_WIDTH = 7
LED_WIDTH = 7
LED_HEIGHT = 7
LAYOUTS = ergodox

4
keyboards/hadron/keymaps/default/rules.mk
View File

@ -1,7 +1,7 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -16,7 +16,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

4
keyboards/hadron/keymaps/side_numpad/rules.mk
View File

@ -1,7 +1,7 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -16,7 +16,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

2
keyboards/handwired/dactyl/dactyl.c
View File

@ -57,7 +57,7 @@ out:
return mcp23018_status;
}
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
// swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

2
keyboards/handwired/dactyl/rules.mk
View File

@ -80,7 +80,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
CUSTOM_MATRIX = yes # Custom matrix file for the Dactyl
NKRO_ENABLE = yes # USB Nkey Rollover
UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard
SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard
SLEEP_LED_ENABLE = no
API_SYSEX_ENABLE = no
RGBLIGHT_ENABLE = no

2
keyboards/helix/rev1/keymaps/OLED_sample/rules.mk
View File

@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

2
keyboards/helix/rev2/keymaps/default/rules.mk
View File

@ -17,7 +17,7 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
# Helix keyboard : see ./config.h: RGBLED_NUM 6 or 32
# Helix keyboard : RGBLIGHT_ENABLE = no or yes
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

4
keyboards/lets_split/keymaps/OLED_sample/rules.mk
View File

@ -1,6 +1,6 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

2
keyboards/lets_split/keymaps/heartrobotninja/rules.mk
View File

@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

4
keyboards/lets_split/keymaps/mjt/rules.mk
View File

@ -1,6 +1,6 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

2
keyboards/lets_split/lets_split.c
View File

@ -1,6 +1,6 @@
#include "lets_split.h"
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

2
keyboards/levinson/levinson.c
View File

@ -1,6 +1,6 @@
#include "levinson.h"
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

2
keyboards/mitosis/mitosis.c
View File

@ -30,7 +30,7 @@ void led_set_kb(uint8_t usb_led) {
}
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

2
keyboards/niu_mini/niu_mini.c
View File

@ -1,6 +1,6 @@
#include "niu_mini.h"
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

2
keyboards/planck/keymaps/experimental/rules.mk
View File

@ -16,7 +16,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = yes # Enable one-hand typing
SWAP_HANDS_ENABLE = yes # Enable one-hand typing
STENO_ENABLE = yes # Enable TX Bolt protocol for Stenography, requires VIRTSER and may not work with mouse keys
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

2
keyboards/planck/planck.c
View File

@ -1,6 +1,6 @@
#include "planck.h"
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

2
keyboards/preonic/preonic.c
View File

@ -1,6 +1,6 @@
#include "preonic.h"
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

7
tmk_core/common.mk
View File

@ -25,7 +25,7 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \
ifeq ($(PLATFORM),AVR)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S
endif
endif
ifeq ($(PLATFORM),CHIBIOS)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c
@ -124,7 +124,10 @@ ifeq ($(strip $(BLUETOOTH)), RN42)
endif
ifeq ($(strip $(ONEHAND_ENABLE)), yes)
TMK_COMMON_DEFS += -DONEHAND_ENABLE
SWAP_HANDS_ENABLE = yes # backwards compatibility
endif
ifeq ($(strip $(SWAP_HANDS_ENABLE)), yes)
TMK_COMMON_DEFS += -DSWAP_HANDS_ENABLE
endif
ifeq ($(strip $(NO_USB_STARTUP_CHECK)), yes)

6
tmk_core/common/action.c
View File

@ -64,7 +64,7 @@ void action_exec(keyevent_t event)
fauxclicky_check();
#endif
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
if (!IS_NOEVENT(event)) {
process_hand_swap(&event);
}
@ -91,7 +91,7 @@ void action_exec(keyevent_t event)
#endif
}
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
bool swap_hands = false;
void process_hand_swap(keyevent_t *event) {
@ -524,7 +524,7 @@ void process_action(keyrecord_t *record, action_t action)
#endif
case ACT_COMMAND:
break;
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
case ACT_SWAP_HANDS:
switch (action.swap.code) {
case OP_SH_TOGGLE:

2
tmk_core/common/action.h
View File

@ -67,7 +67,7 @@ extern bool disable_action_cache;
#endif
/* Code for handling one-handed key modifiers. */
#ifdef ONEHAND_ENABLE
#ifdef SWAP_HANDS_ENABLE
extern bool swap_hands;
extern const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS];
#if (MATRIX_COLS <= 8)