diff --git a/keyboards/rama/m6_a/config.h b/keyboards/rama/m6_a/config.h
new file mode 100644
index 000000000..0c5355f4a
--- /dev/null
+++ b/keyboards/rama/m6_a/config.h
@@ -0,0 +1,190 @@
+/*
+Copyright 2018 Wilba
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5241 // "RW"
+#define PRODUCT_ID 0x006A // 6-A
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RAMA.WORKS
+#define PRODUCT RAMA M6-A
+#define DESCRIPTION RAMA M6-A Macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
diff --git a/keyboards/rama/m6_a/keymaps/default/config.h b/keyboards/rama/m6_a/keymaps/default/config.h
new file mode 100644
index 000000000..d150575c1
--- /dev/null
+++ b/keyboards/rama/m6_a/keymaps/default/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/rama/m6_a/keymaps/default/keymap.c b/keyboards/rama/m6_a/keymaps/default/keymap.c
new file mode 100644
index 000000000..1323ba6f2
--- /dev/null
+++ b/keyboards/rama/m6_a/keymaps/default/keymap.c
@@ -0,0 +1,298 @@
+#include "../../m6_a.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ KEYMAP(
+ TO(1), KC_A, KC_B, KC_C, KC_D, KC_E),
+
+ KEYMAP(
+ TO(2), KC_F, KC_G, KC_H, KC_I, KC_J),
+
+ KEYMAP(
+ TO(3), KC_K, KC_L, KC_M, KC_N, KC_O),
+
+ KEYMAP(
+ TO(4), KC_P, KC_Q, KC_R, KC_S, KC_T),
+
+ KEYMAP(
+ TO(5), KC_U, KC_V, KC_W, KC_X, KC_Y),
+
+ KEYMAP(
+ TO(0), KC_Z, KC_1, KC_2, KC_3, KC_4)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ //keyevent_t event = record->event;
+
+ switch (id) {
+ case 0:
+ if (record->event.pressed) {
+ return MACRO( T(T), T(G), T(L), T(H), T(F), T(ENT), END );
+ }
+ break;
+ case 1:
+ if (record->event.pressed) {
+ return MACRO( T(T), T(G), T(G), T(ENT), END );
+ }
+ break;
+ case 2:
+ if (record->event.pressed) {
+ return MACRO( D(NO), T(L), U(NO), END );
+ }
+ break;
+ case 3:
+ if (record->event.pressed) {
+ return MACRO( D(LCTL), T(Z), U(LCTL), END );
+ }
+ break;
+ case 4:
+ if (record->event.pressed) {
+ return MACRO( D(LCTL), D(LSFT), T(Z), U(LSFT), U(LCTL), END );
+ }
+ break;
+ case 5:
+ if (record->event.pressed) {
+ return MACRO( D(LCTL), T(X), U(LCTL), END );
+ }
+ break;
+ case 6:
+ if (record->event.pressed) {
+ return MACRO( D(LCTL), T(C), U(LCTL), END );
+ }
+ break;
+ case 7:
+ if (record->event.pressed) {
+ return MACRO( D(LCTL), T(V), U(LCTL), END );
+ }
+ break;
+ }
+ return MACRO_NONE;
+}
+
+// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
+// This is 1-based because I copied it from Knops code.
+void set_switch_led(int ledId, bool state) {
+ if(state) {
+ switch(ledId) {
+ case 1:
+ PORTD |= (1<<6);
+ break;
+ case 2:
+ PORTB |= (1<<6);
+ break;
+ case 3:
+ PORTF |= (1<<5);
+ break;
+ case 4:
+ PORTB |= (1<<4);
+ break;
+ case 5:
+ PORTC |= (1<<7);
+ break;
+ case 6:
+ PORTF |= (1<<7);
+ break;
+ }
+ } else {
+ switch(ledId) {
+ case 1:
+ PORTD &= ~(1<<6);
+ break;
+ case 2:
+ PORTB &= ~(1<<6);
+ break;
+ case 3:
+ PORTF &= ~(1<<5);
+ break;
+ case 4:
+ PORTB &= ~(1<<4);
+ break;
+ case 5:
+ PORTC &= ~(1<<7);
+ break;
+ case 6:
+ PORTF &= ~(1<<7);
+ break;
+ }
+ }
+}
+
+
+void set_layer_led(int layerId) {
+ // UNUSED
+}
+
+void led_set_layer(int layer);
+
+void matrix_init_user(void) {
+ led_init_ports();
+ led_set_layer(0);
+}
+
+void matrix_scan_user(void) {
+}
+
+// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
+void led_init_ports() {
+ // Switch #1
+ DDRD |= (1<<6);
+ PORTD &= ~(1<<6);
+
+ // Switch #2
+ DDRB |= (1<<6);
+ PORTB &= ~(1<<6);
+
+ // Switch #3
+ DDRF |= (1<<5);
+ PORTF &= ~(1<<5);
+
+ // Switch #4
+ DDRB |= (1<<4);
+ PORTB &= ~(1<<4);
+
+ // Switch #5
+ DDRC |= (1<<7);
+ PORTC &= ~(1<<7);
+
+ // Switch #6
+ DDRF |= (1<<7);
+ PORTF &= ~(1<<7);
+}
+
+void led_set_user(uint8_t usb_led) {
+
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_KANA)) {
+
+ } else {
+
+ }
+
+}
+
+void led_set_layer(int layer) {
+ switch(layer) {
+ case 0:
+ set_switch_led(1, true);
+ set_switch_led(2, false);
+ set_switch_led(3, false);
+ set_switch_led(4, false);
+ set_switch_led(5, false);
+ set_switch_led(6, false);
+ break;
+ case 1:
+ set_switch_led(1, false);
+ set_switch_led(2, true);
+ set_switch_led(3, false);
+ set_switch_led(4, false);
+ set_switch_led(5, false);
+ set_switch_led(6, false);
+ break;
+ case 2:
+ set_switch_led(1, false);
+ set_switch_led(2, false);
+ set_switch_led(3, true);
+ set_switch_led(4, false);
+ set_switch_led(5, false);
+ set_switch_led(6, false);
+ break;
+ case 3:
+ set_switch_led(1, false);
+ set_switch_led(2, false);
+ set_switch_led(3, false);
+ set_switch_led(4, true);
+ set_switch_led(5, false);
+ set_switch_led(6, false);
+ break;
+ case 4:
+ set_switch_led(1, false);
+ set_switch_led(2, false);
+ set_switch_led(3, false);
+ set_switch_led(4, false);
+ set_switch_led(5, true);
+ set_switch_led(6, false);
+ break;
+ case 5:
+ set_switch_led(1, false);
+ set_switch_led(2, false);
+ set_switch_led(3, false);
+ set_switch_led(4, false);
+ set_switch_led(5, false);
+ set_switch_led(6, true);
+ break;
+ default:
+ set_switch_led(1, true);
+ set_switch_led(2, true);
+ set_switch_led(3, true);
+ set_switch_led(4, true);
+ set_switch_led(5, true);
+ set_switch_led(6, true);
+ break;
+ }
+}
+
+bool process_record_user (uint16_t keycode, keyrecord_t *record) {
+ switch ( keycode )
+ {
+ case TO( 0 ):
+ if ( record->event.pressed )
+ {
+ led_set_layer( 0 );
+ }
+ break;
+ case TO( 1 ):
+ if ( record->event.pressed )
+ {
+ led_set_layer( 1 );
+ }
+ break;
+ case TO( 2 ):
+ if ( record->event.pressed )
+ {
+ led_set_layer( 2 );
+ }
+ break;
+ case TO( 3 ):
+ if ( record->event.pressed )
+ {
+ led_set_layer( 3 );
+ }
+ break;
+ case TO( 4 ):
+ if ( record->event.pressed )
+ {
+ led_set_layer( 4 );
+ }
+ break;
+ case TO( 5 ):
+ if ( record->event.pressed )
+ {
+ led_set_layer( 5 );
+ }
+ break;
+ }
+ return true;
+}
diff --git a/keyboards/rama/m6_a/keymaps/default/readme.md b/keyboards/rama/m6_a/keymaps/default/readme.md
new file mode 100644
index 000000000..cfb90f650
--- /dev/null
+++ b/keyboards/rama/m6_a/keymaps/default/readme.md
@@ -0,0 +1,12 @@
+
+
+# Default RAMA M6-A Layout
+
+This is an example layout to demonstrate layer toggling.
+
+The top left key will cycle through six layers.
+
+If LEDs are installed, one of the six LEDs will be on to indicate current layer.
+
+LEDs should be installed cathode pin on the square pad.
+
diff --git a/keyboards/rama/m6_a/keymaps/knops/config.h b/keyboards/rama/m6_a/keymaps/knops/config.h
new file mode 100644
index 000000000..999d8876c
--- /dev/null
+++ b/keyboards/rama/m6_a/keymaps/knops/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2017 Pawnerd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/rama/m6_a/keymaps/knops/keymap.c b/keyboards/rama/m6_a/keymaps/knops/keymap.c
new file mode 100644
index 000000000..912147f4b
--- /dev/null
+++ b/keyboards/rama/m6_a/keymaps/knops/keymap.c
@@ -0,0 +1,120 @@
+#include "../../m6_a.h"
+
+/*KNOPS_MISC*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /*KNOPS_KEYMAP*/
+
+};
+
+void set_led_state(int ledId, bool state) {
+ if(state) {
+ switch(ledId) {
+ case 0:
+ PORTD |= (1<<6);
+ break;
+ case 1:
+ PORTB |= (1<<6);
+ break;
+ case 2:
+ PORTF |= (1<<5);
+ break;
+ case 3:
+ PORTB |= (1<<4);
+ break;
+ case 4:
+ PORTC |= (1<<7);
+ break;
+ case 5:
+ PORTF |= (1<<7);
+ break;
+ }
+ } else {
+ switch(ledId) {
+ case 0:
+ PORTD &= ~(1<<6);
+ break;
+ case 1:
+ PORTB &= ~(1<<6);
+ break;
+ case 2:
+ PORTF &= ~(1<<5);
+ break;
+ case 3:
+ PORTB &= ~(1<<4);
+ break;
+ case 4:
+ PORTC &= ~(1<<7);
+ break;
+ case 5:
+ PORTF &= ~(1<<7);
+ break;
+ }
+ }
+}
+
+void led_init_ports() {
+ // Switch #1
+ DDRD |= (1<<6);
+ PORTD &= ~(1<<6);
+
+ // Switch #2
+ DDRB |= (1<<6);
+ PORTB &= ~(1<<6);
+
+ // Switch #3
+ DDRF |= (1<<5);
+ PORTF &= ~(1<<5);
+
+ // Switch #4
+ DDRB |= (1<<4);
+ PORTB &= ~(1<<4);
+
+ // Switch #5
+ DDRC |= (1<<7);
+ PORTC &= ~(1<<7);
+
+ // Switch #6
+ DDRF |= (1<<7);
+ PORTF &= ~(1<<7);
+}
+
+void led_set_layer(int layer) {
+
+ /*KNOPS_SIMPLELED_STATES*/
+
+}
+
+void matrix_init_user(void) {
+ led_init_ports();
+
+ led_set_layer(0);
+
+ /*KNOPS_INIT*/
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ //keyevent_t event = record->event;
+
+ /*KNOPS_MACRO*/
+ return NULL;
+}
+
+void matrix_scan_user(void) {
+ /*KNOPS_SCAN*/
+}
+
+void led_set_user(uint8_t usb_led) {
+
+ /*KNOPS_FUNCTIONALLED_STATES*/
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+
+ /*KNOPS_PROCESS_STATE*/
+ return NULL;
+}
+
+
diff --git a/keyboards/rama/m6_a/keymaps/knops/readme.md b/keyboards/rama/m6_a/keymaps/knops/readme.md
new file mode 100644
index 000000000..58696974e
--- /dev/null
+++ b/keyboards/rama/m6_a/keymaps/knops/readme.md
@@ -0,0 +1,11 @@
+# Default Knops Mini Layout
+
+
+
+
+
+This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot:
+
+
+
+As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.
\ No newline at end of file
diff --git a/keyboards/rama/m6_a/m6_a.c b/keyboards/rama/m6_a/m6_a.c
new file mode 100644
index 000000000..1c84ea2b8
--- /dev/null
+++ b/keyboards/rama/m6_a/m6_a.c
@@ -0,0 +1,44 @@
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include "m6_a.h"
+/*
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
+*/
diff --git a/keyboards/rama/m6_a/m6_a.h b/keyboards/rama/m6_a/m6_a.h
new file mode 100644
index 000000000..6809c2cc9
--- /dev/null
+++ b/keyboards/rama/m6_a/m6_a.h
@@ -0,0 +1,29 @@
+/* Copyright 2018 Wilba
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include "quantum.h"
+
+#ifndef RAMA_M6_A_H
+#define RAMA_M6_A_H
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05 \
+) { \
+ { K00, K01, K02, K03, K04, K05 }, \
+}
+#endif // RAMA_M6_A
diff --git a/keyboards/rama/m6_a/readme.md b/keyboards/rama/m6_a/readme.md
new file mode 100644
index 000000000..5dd2b92e1
--- /dev/null
+++ b/keyboards/rama/m6_a/readme.md
@@ -0,0 +1,15 @@
+# RAMA M6-A
+
+
+
+A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+Hardware Supported: RAMA M6-A PCB
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make rama/m6_a:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file
diff --git a/keyboards/rama/m6_a/rules.mk b/keyboards/rama/m6_a/rules.mk
new file mode 100644
index 000000000..ca2a2a5f8
--- /dev/null
+++ b/keyboards/rama/m6_a/rules.mk
@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
diff --git a/keyboards/rama/readme.md b/keyboards/rama/readme.md
new file mode 100644
index 000000000..4625eb1ef
--- /dev/null
+++ b/keyboards/rama/readme.md
@@ -0,0 +1,9 @@
+# RAMA
+
+Firmware for keyboards designed by [RAMA WORKS](https://rama.works)
+
+[RAMA M6-A](https://rama.works/m6a)
+
+[RAMA M60-A](https://rama.works/#/m60-a/)
+
+[RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)