From 54b5bafaacf0d7863b7bdb84dd69cbc80db77956 Mon Sep 17 00:00:00 2001 From: tmk Date: Thu, 14 Oct 2010 17:36:00 +0900 Subject: [PATCH] add directories for each keyboard: hhkb, macway --- Makefile.hhkb => Makefile.common | 39 +- Makefile.macway | 620 ----------------------- README | 30 +- hhkb/Makefile | 72 +++ {HHKB => hhkb/doc}/HHKB.txt | 0 {HHKB => hhkb/doc}/HHKB_TP1684.jpg | Bin 149074 -> 149082 bytes {HHKB => hhkb/doc}/HHKB_chart1.jpg | Bin {HHKB => hhkb/doc}/HHKB_chart2.jpg | Bin {HHKB => hhkb/doc}/HHKB_connector.jpg | Bin {HHKB => hhkb/doc}/HHKB_controller.jpg | Bin {HHKB => hhkb/doc}/HHKB_keyswitch.jpg | Bin {HHKB => hhkb/doc}/connector_contact.jpg | Bin {HHKB => hhkb/doc}/logic_analyzer.jpg | Bin {HHKB => hhkb/doc}/probe_contact.jpg | Bin {HHKB => hhkb/doc}/teensy_install.jpg | Bin {HHKB => hhkb/doc}/teensy_wiring.jpg | Bin keymap_hhkb.c => hhkb/keymap.c | 4 +- keymap_hhkb.h => hhkb/keymap.h | 1 + matrix_hhkb.c => hhkb/matrix.c | 3 - key_process.c | 174 +++++++ key_process.h | 6 + macway/Makefile | 67 +++ keymap.c => macway/keymap.c | 5 +- keymap.h => macway/keymap.h | 11 +- matrix.c => macway/matrix.c | 0 tmk.c | 145 +----- 26 files changed, 383 insertions(+), 794 deletions(-) rename Makefile.hhkb => Makefile.common (95%) delete mode 100644 Makefile.macway create mode 100644 hhkb/Makefile rename {HHKB => hhkb/doc}/HHKB.txt (100%) rename {HHKB => hhkb/doc}/HHKB_TP1684.jpg (99%) rename {HHKB => hhkb/doc}/HHKB_chart1.jpg (100%) rename {HHKB => hhkb/doc}/HHKB_chart2.jpg (100%) rename {HHKB => hhkb/doc}/HHKB_connector.jpg (100%) rename {HHKB => hhkb/doc}/HHKB_controller.jpg (100%) rename {HHKB => hhkb/doc}/HHKB_keyswitch.jpg (100%) rename {HHKB => hhkb/doc}/connector_contact.jpg (100%) rename {HHKB => hhkb/doc}/logic_analyzer.jpg (100%) rename {HHKB => hhkb/doc}/probe_contact.jpg (100%) rename {HHKB => hhkb/doc}/teensy_install.jpg (100%) rename {HHKB => hhkb/doc}/teensy_wiring.jpg (100%) rename keymap_hhkb.c => hhkb/keymap.c (99%) rename keymap_hhkb.h => hhkb/keymap.h (92%) rename matrix_hhkb.c => hhkb/matrix.c (95%) create mode 100644 key_process.c create mode 100644 key_process.h create mode 100644 macway/Makefile rename keymap.c => macway/keymap.c (98%) rename keymap.h => macway/keymap.h (74%) rename matrix.c => macway/matrix.c (100%) diff --git a/Makefile.hhkb b/Makefile.common similarity index 95% rename from Makefile.hhkb rename to Makefile.common index fbf7ede2e..8037b0772 100644 --- a/Makefile.hhkb +++ b/Makefile.common @@ -39,37 +39,28 @@ # To rebuild project do "make clean" then "make all". #---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = tmk_hhkb +# Following variables need to be set in /Makefile: +# TARGET +# COMMON_DIR +# TARGET_DIR +# TARGET_SRC +# MCU +# F_CPU # List C source files here. (C dependencies are automatically generated.) SRC = tmk.c \ + key_process.c \ usb.c \ usb_keyboard.c \ usb_mouse.c \ usb_debug.c \ - keymap_hhkb.c \ - matrix_hhkb.c \ jump_bootloader.c \ print.c +SRC += $(TARGET_SRC) - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -#MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 +# C source file search path +VPATH = $(TARGET_DIR):$(COMMON_DIR) # Output format. (can be srec, ihex, binary) @@ -113,7 +104,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = +EXTRAINCDIRS = $(TARGET_DIR) $(COMMON_DIR) # Compiler flag to set the C Standard level. @@ -161,7 +152,7 @@ CFLAGS += -Wstrict-prototypes #CFLAGS += -Wundef #CFLAGS += -Wunreachable-code #CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += -Wa,-adhlns=$(@:%.o=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -376,10 +367,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. diff --git a/Makefile.macway b/Makefile.macway deleted file mode 100644 index d259fd2db..000000000 --- a/Makefile.macway +++ /dev/null @@ -1,620 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# Target file name (without extension). -TARGET = tmk - - -# List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - usb.c \ - usb_keyboard.c \ - usb_mouse.c \ - usb_debug.c \ - keymap.c \ - matrix.c \ - jump_bootloader.c \ - print.c - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL - - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) - - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -#CPPDEFS += -D__STDC_LIMIT_MACROS -#CPPDEFS += -D__STDC_CONSTANT_MACROS - - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fpack-struct -CFLAGS += -fshort-enums -CFLAGS += -Wall -CFLAGS += -Wstrict-prototypes -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -fpack-struct -CPPFLAGS += -fshort-enums -CPPFLAGS += -fno-exceptions -CPPFLAGS += -Wall -CPPFLAGS += -Wundef -#CPPFLAGS += -mshort-calls -#CPPFLAGS += -fno-unit-at-a-time -#CPPFLAGS += -Wstrict-prototypes -#CPPFLAGS += -Wunreachable-code -#CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - -# List any extra directories to look for libraries here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax -LDFLAGS += -Wl,--gc-sections -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x - - - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = stk500v2 - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = com1 # programmer connected to serial device - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -AR = avr-ar rcs -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex eep lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf -ELFSIZE = $(SIZE) $(TARGET).elf - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) -endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause - -else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) -endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT = $(OBJCOPY) --debugging -COFFCONVERT += --change-section-address .data-0x800000 -COFFCONVERT += --change-section-address .bss-0x800000 -COFFCONVERT += --change-section-address .noinit-0x800000 -COFFCONVERT += --change-section-address .eeprom-0x810000 - - - -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ - -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list end - -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep - - -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff \ -clean clean_list program debug gdb-config diff --git a/README b/README index 1dc82ae22..c06c6cba3 100644 --- a/README +++ b/README @@ -2,7 +2,7 @@ t.m.k. Keyboard Firmware ======================== http://github.com/tmk/tmk_keyboard -This is keyboard firmware for PFU HHKB style keyboard and teensy 2.0. +This is keyboard firmware for PFU HHKB style keyboard and Teensy/Teensy++ 2.0. OS see this as composite device which has keyboard and mouse. The project is heavily based on PJRC USB Keyboard/Mouse Example and @@ -31,10 +31,23 @@ Version Matrix wiring changed for casing. (and my Teensy PD3 seems to be latchuped and unusable. :<) +1.2 2010/10/13 + HHKB support + horizontal mouse wheel support + change keymaps -Target board ------------- -Teensy 2.0 + +Build +----- +Compiling sources need AVR GCC, AVR Libc and GNU make.(You can use WinAVR on Windows.) + +$ cd (hhkb or macway) +$ make + + +AVR Target board +---------------- +Teensy/Teensy++ http://www.pjrc.com/teensy @@ -72,8 +85,6 @@ debouncing logic bouncing doesnt occur on my ALPS switch so far. scan rate is too slow?(to be measure) -support for HHKB pro matrix signal - exchange controller board with teensy Trackpoint(PS/2) receive PS/2 signal from TrackPoint send USB HID report @@ -90,6 +101,13 @@ setting menu(configure without changing firmware) matrix display PS/2 keyboard mode with USB to PS/2 dumb adapter(possible?) +AT90USBKEY support + and other AVR USB boards + +DONE: +support for HHKB pro matrix signal + exchange controller board with teensy + 2010/10/11 EOF diff --git a/hhkb/Makefile b/hhkb/Makefile new file mode 100644 index 000000000..980980cfe --- /dev/null +++ b/hhkb/Makefile @@ -0,0 +1,72 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# Target file name (without extension). +TARGET = tmk_hhkb + +# Directory common source filess exist +COMMON_DIR = .. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +TARGET_SRC = keymap.c \ + matrix.c + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +#MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + +include $(COMMON_DIR)/Makefile.common diff --git a/HHKB/HHKB.txt b/hhkb/doc/HHKB.txt similarity index 100% rename from HHKB/HHKB.txt rename to hhkb/doc/HHKB.txt diff --git a/HHKB/HHKB_TP1684.jpg b/hhkb/doc/HHKB_TP1684.jpg similarity index 99% rename from HHKB/HHKB_TP1684.jpg rename to hhkb/doc/HHKB_TP1684.jpg index 7ff3573e23857d323dfeab423a80ca80f232c7aa..0a0316409434b22a50de1b3ef1bf7d1871dab8d8 100755 GIT binary patch delta 110 zcmccA!+EQRbAp4e6eBAGBLf3N0}u-_GK1MbCWACoyaUMAfQmD1%#~J9QVGb&FUc>? u$S+VZ)-zzRaPstJVF77jV3%R4U|=e+o?Oi{q1i~W-AIvfyOAQ3f+_&2VG@S` delta 101 zcmccB!+EKPbAp4e5F;}KBLf6TF|vZ$4M462RGbOOmWGOVY|NEbkdz6?$S=t+&d4uN iFxE3*uyFG9WnlpsFu96nVzZTEyOkp2b}L0D1yukLv=KxA diff --git a/HHKB/HHKB_chart1.jpg b/hhkb/doc/HHKB_chart1.jpg similarity index 100% rename from HHKB/HHKB_chart1.jpg rename to hhkb/doc/HHKB_chart1.jpg diff --git a/HHKB/HHKB_chart2.jpg b/hhkb/doc/HHKB_chart2.jpg similarity index 100% rename from HHKB/HHKB_chart2.jpg rename to hhkb/doc/HHKB_chart2.jpg diff --git a/HHKB/HHKB_connector.jpg b/hhkb/doc/HHKB_connector.jpg similarity index 100% rename from HHKB/HHKB_connector.jpg rename to hhkb/doc/HHKB_connector.jpg diff --git a/HHKB/HHKB_controller.jpg b/hhkb/doc/HHKB_controller.jpg similarity index 100% rename from HHKB/HHKB_controller.jpg rename to hhkb/doc/HHKB_controller.jpg diff --git a/HHKB/HHKB_keyswitch.jpg b/hhkb/doc/HHKB_keyswitch.jpg similarity index 100% rename from HHKB/HHKB_keyswitch.jpg rename to hhkb/doc/HHKB_keyswitch.jpg diff --git a/HHKB/connector_contact.jpg b/hhkb/doc/connector_contact.jpg similarity index 100% rename from HHKB/connector_contact.jpg rename to hhkb/doc/connector_contact.jpg diff --git a/HHKB/logic_analyzer.jpg b/hhkb/doc/logic_analyzer.jpg similarity index 100% rename from HHKB/logic_analyzer.jpg rename to hhkb/doc/logic_analyzer.jpg diff --git a/HHKB/probe_contact.jpg b/hhkb/doc/probe_contact.jpg similarity index 100% rename from HHKB/probe_contact.jpg rename to hhkb/doc/probe_contact.jpg diff --git a/HHKB/teensy_install.jpg b/hhkb/doc/teensy_install.jpg similarity index 100% rename from HHKB/teensy_install.jpg rename to hhkb/doc/teensy_install.jpg diff --git a/HHKB/teensy_wiring.jpg b/hhkb/doc/teensy_wiring.jpg similarity index 100% rename from HHKB/teensy_wiring.jpg rename to hhkb/doc/teensy_wiring.jpg diff --git a/keymap_hhkb.c b/hhkb/keymap.c similarity index 99% rename from keymap_hhkb.c rename to hhkb/keymap.c index 7074df411..d7e6bbe3b 100644 --- a/keymap_hhkb.c +++ b/hhkb/keymap.c @@ -1,10 +1,10 @@ /* - * keymap for modified macway keyboarq + * keymap for HHKB pro */ #include #include #include "matrix.h" -#include "keymap_hhkb.h" +#include "keymap.h" #include "usb_keyboard.h" int current_layer = 0; diff --git a/keymap_hhkb.h b/hhkb/keymap.h similarity index 92% rename from keymap_hhkb.h rename to hhkb/keymap.h index 1c2d100e6..be78609e6 100644 --- a/keymap_hhkb.h +++ b/hhkb/keymap.h @@ -2,6 +2,7 @@ #define KEYMAP_H 1 #include +#include #include "usb_keycodes.h" diff --git a/matrix_hhkb.c b/hhkb/matrix.c similarity index 95% rename from matrix_hhkb.c rename to hhkb/matrix.c index d1c0003b4..3034a6361 100644 --- a/matrix_hhkb.c +++ b/hhkb/matrix.c @@ -50,7 +50,6 @@ void matrix_init(void) uint8_t matrix_scan(void) { - uint8_t state; uint8_t *tmp; tmp = matrix_prev; @@ -59,12 +58,10 @@ uint8_t matrix_scan(void) for (int row = 0; row < MATRIX_ROWS; row++) { for (int col = 0; col < MATRIX_COLS; col++) { -//print("scan: "); phex(row); phex(col); print("\n"); KEY_SELELCT(row, col); _delay_us(50); // from logic analyzer chart KEY_ENABLE; _delay_us(10); // from logic analyzer chart -//print("PINE: "); phex(PINE); print("\n"); if (KEY_ON) { matrix[row] &= ~(1< +#include +#include +#include +#include +#include "usb.h" +#include "usb_keyboard.h" +#include "usb_mouse.h" +#include "print.h" +#include "matrix.h" +#include "keymap.h" +#include "jump_bootloader.h" + +#include "key_process.h" + + +// for Teensy/Teensy++ 2.0 +#define LED_CONFIG (DDRD |= (1<<6)) +#define LED_ON (PORTD |= (1<<6)) +#define LED_OFF (PORTD &= ~(1<<6)) + +#define MOUSE_MOVE_UNIT 10 +#define MOUSE_DELAY_MS 200 +#define MOUSE_DELAY_ACC 5 + + + +static void print_matrix(void); +static void print_keys(void); +static void print_mouse(int8_t mouse_x, int8_t mouse_y, int8_t wheel_v, int8_t wheel_h); + +void proc_matrix(void) { + static int mouse_repeat = 0; + + bool modified = false; + bool has_ghost = false; + int layer = 0; + int key_index = 0; + uint8_t mouse_btn = 0; + int8_t mouse_x = 0; + int8_t mouse_y = 0; + int8_t mouse_wheel = 0; + int8_t mouse_hwheel = 0; + + matrix_scan(); + modified = matrix_is_modified(); + has_ghost = matrix_has_ghost(); + layer = get_layer(); + + // print matrix state for debug + if (modified) { + print_matrix(); + + // LED flash for debug + LED_CONFIG; + LED_ON; + } + + keyboard_modifier_keys = 0; + for (int i = 0; i < 3; i++) keyboard_keys[i] = KB_NO; + key_index = 0; + mouse_btn = 0; + mouse_x = 0; + mouse_y = 0; + mouse_wheel = 0; + mouse_hwheel = 0; + + // convert matrix state to HID report + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + if (matrix[row] & 1<= MS_UP) { + // mouse + if (code == MS_UP) mouse_y -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); + if (code == MS_DOWN) mouse_y += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); + if (code == MS_LEFT) mouse_x -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); + if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); + if (code == MS_BTN1) mouse_btn |= 1<<0; + if (code == MS_BTN2) mouse_btn |= 1<<1; + if (code == MS_BTN3) mouse_btn |= 1<<2; + if (code == MS_BTN4) mouse_btn |= 1<<3; + if (code == MS_BTN5) mouse_btn |= 1<<4; + if (code == MS_WH_UP) mouse_wheel += 1; + if (code == MS_WH_DOWN) mouse_wheel -= 1; + if (code == MS_WH_LEFT) mouse_hwheel -= 1; + if (code == MS_WH_RIGHT) mouse_hwheel += 1; + } else { + // normal keys + if (key_index < 6) + keyboard_keys[key_index] = code; + key_index++; + } + } + } + + if (!has_ghost) { + // when 4 left modifier keys down + if (keyboard_modifier_keys == (MOD_LCTRL | MOD_LSHIFT | MOD_LALT | MOD_LGUI)) { + // cancel all keys + keyboard_modifier_keys = 0; + for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO; + usb_keyboard_send(); + + print("jump to bootloader...\n"); + _delay_ms(100); + jump_bootloader(); // not return + } + + if (mouse_x || mouse_y || mouse_wheel || mouse_hwheel || mouse_btn != mouse_buttons) { + mouse_buttons = mouse_btn; + usb_mouse_move(mouse_x, mouse_y, mouse_wheel, mouse_hwheel); + print_mouse(mouse_x, mouse_y, mouse_wheel, mouse_hwheel); + key_sent = true; + + // acceleration + _delay_ms(MOUSE_DELAY_MS >> (mouse_repeat < MOUSE_DELAY_ACC ? mouse_repeat : MOUSE_DELAY_ACC)); + mouse_repeat++; + } else { + mouse_repeat = 0; + } + + + // send keys to host + if (modified) { + if (key_index > 6) { + //Rollover + } + usb_keyboard_send(); + if (keyboard_keys[0]) + key_sent = true; + + print_keys(); + // LED flash for debug + LED_CONFIG; + LED_OFF; + } + } +} + +static void print_matrix(void) { + print("\nr/c 01234567\n"); + for (int row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse(matrix[row]); + if (matrix_has_ghost_in_row(row)) { + print(" #include #include "matrix.h" #include "keymap.h" +#include "usb_keyboard.h" int current_layer = 0; +bool key_sent = false; /* * Layer0(Default Layer) diff --git a/keymap.h b/macway/keymap.h similarity index 74% rename from keymap.h rename to macway/keymap.h index 6b95fb61f..b428b47a8 100644 --- a/keymap.h +++ b/macway/keymap.h @@ -2,12 +2,19 @@ #define KEYMAP_H 1 #include +#include #include "usb_keycodes.h" -int get_layer(void); -uint8_t get_keycode(int layer, int row, int col); #define MATRIX_ROWS 9 #define MATRIX_COLS 8 + +extern int current_layer; +extern bool key_sent; + + +int get_layer(void); +uint8_t get_keycode(int layer, int row, int col); + #endif diff --git a/matrix.c b/macway/matrix.c similarity index 100% rename from matrix.c rename to macway/matrix.c diff --git a/tmk.c b/tmk.c index 7af0c748c..c01972514 100644 --- a/tmk.c +++ b/tmk.c @@ -24,6 +24,7 @@ * THE SOFTWARE. */ +// TODO: clean unused headers #include #include #include @@ -34,22 +35,18 @@ #include "usb_mouse.h" #include "print.h" #include "matrix.h" -#include "keymap_hhkb.h" +#include "keymap.h" #include "jump_bootloader.h" +#include "key_process.h" -// for teensy 2.0 +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) + +// TODO: should go to hardware dependent file +// for Teensy/Teensy++ 2.0 #define LED_CONFIG (DDRD |= (1<<6)) #define LED_ON (PORTD |= (1<<6)) #define LED_OFF (PORTD &= ~(1<<6)) -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) - -#define MOUSE_MOVE_UNIT 10 -#define MOUSE_DELAY_MS 200 -#define MOUSE_DELAY_ACC 5 - - -static void print_matrix(void); uint16_t idle_count=0; @@ -88,137 +85,13 @@ int main(void) matrix_init(); - - bool modified = false; - bool has_ghost = false; - int layer = 0; - int key_index = 0; - uint8_t mouse_x = 0; - uint8_t mouse_y = 0; - uint8_t mouse_btn = 0; - int8_t mouse_wheel = 0; - int8_t mouse_hwheel = 0; - int mouse_repeat = 0; - - print("\nt.m.k. keyboard 1.0 for hhkb\n"); + print("\nt.m.k. keyboard 1.2\n"); while (1) { - matrix_scan(); - modified = matrix_is_modified(); - has_ghost = matrix_has_ghost(); - layer = get_layer(); - - // print matrix state for debug - if (modified) { - print_matrix(); - - // LED flash for debug - LED_CONFIG; - LED_ON; - } - - keyboard_modifier_keys = 0; - for (int i = 0; i < 3; i++) keyboard_keys[i] = KB_NO; - key_index = 0; - mouse_x = 0; - mouse_y = 0; - mouse_btn = 0; - mouse_wheel = 0; - mouse_hwheel = 0; - - // convert matrix state to HID report - for (int row = 0; row < MATRIX_ROWS; row++) { - for (int col = 0; col < MATRIX_COLS; col++) { - if (matrix[row] & 1<= MS_UP) { - // mouse - if (code == MS_UP) mouse_y -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); - if (code == MS_DOWN) mouse_y += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); - if (code == MS_LEFT) mouse_x -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); - if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10); - if (code == MS_BTN1) mouse_btn |= 1<<0; - if (code == MS_BTN2) mouse_btn |= 1<<1; - if (code == MS_BTN3) mouse_btn |= 1<<2; - if (code == MS_BTN4) mouse_btn |= 1<<3; - if (code == MS_BTN5) mouse_btn |= 1<<4; - if (code == MS_WH_UP) mouse_wheel += 1; - if (code == MS_WH_DOWN) mouse_wheel -= 1; - if (code == MS_WH_LEFT) mouse_hwheel -= 1; - if (code == MS_WH_RIGHT) mouse_hwheel += 1; - } else { - // normal keys - if (key_index < 6) - keyboard_keys[key_index] = code; - key_index++; - } - } - } - - if (!has_ghost) { - // when 4 left modifier keys down - if (keyboard_modifier_keys == (MOD_LCTRL | MOD_LSHIFT | MOD_LALT | MOD_LGUI)) { - // cancel all keys - keyboard_modifier_keys = 0; - for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO; - usb_keyboard_send(); - - print("jump to bootloader...\n"); - _delay_ms(100); - jump_bootloader(); // not return - } - - if (mouse_x || mouse_y || mouse_wheel || mouse_hwheel || mouse_btn != mouse_buttons) { - mouse_buttons = mouse_btn; - usb_mouse_move(mouse_x, mouse_y, mouse_wheel, mouse_hwheel); - key_sent = true; - - // acceleration - _delay_ms(MOUSE_DELAY_MS >> (mouse_repeat < MOUSE_DELAY_ACC ? mouse_repeat : MOUSE_DELAY_ACC)); - mouse_repeat++; - } else { - mouse_repeat = 0; - } - - - // send keys to host - if (modified) { - if (key_index > 6) { - //Rollover - } - usb_keyboard_send(); - if (keyboard_keys[0]) - key_sent = true; - - // LED flash for debug - LED_CONFIG; - LED_OFF; - } - } + proc_matrix(); _delay_ms(2); } } -static void print_matrix(void) { - print("\nr/c 01234567\n"); - for (int row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse(matrix[row]); - if (matrix_has_ghost_in_row(row)) { - print("