From 39ece819791eed7f57e0a0492c1aa774be5c4b24 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 7 Jul 2017 11:56:01 -0400 Subject: [PATCH] delete old lufa --- lib/lufa/Projects/TempDataLogger/asf.xml | 144 +- lib/lufa/Projects/USBtoSerial/asf.xml | 102 +- lib/lufa/Projects/Webserver/asf.xml | 192 +- lib/lufa/Projects/XPLAINBridge/asf.xml | 114 +- tmk_core/protocol/lufa/LUFA-git/.gitignore | 14 - .../LUFA-git/Bootloaders/CDC/BootloaderAPI.c | 75 - .../LUFA-git/Bootloaders/CDC/BootloaderAPI.h | 58 - .../Bootloaders/CDC/BootloaderAPITable.S | 91 - .../LUFA-git/Bootloaders/CDC/BootloaderCDC.c | 641 ----- .../LUFA-git/Bootloaders/CDC/BootloaderCDC.h | 144 - .../Bootloaders/CDC/BootloaderCDC.txt | 240 -- .../Bootloaders/CDC/Config/AppConfig.h | 50 - .../Bootloaders/CDC/Config/LUFAConfig.h | 93 - .../LUFA-git/Bootloaders/CDC/Descriptors.c | 244 -- .../LUFA-git/Bootloaders/CDC/Descriptors.h | 158 -- .../Bootloaders/CDC/LUFA CDC Bootloader.inf | 66 - .../lufa/LUFA-git/Bootloaders/CDC/asf.xml | 161 -- .../lufa/LUFA-git/Bootloaders/CDC/doxyfile | 2365 ---------------- .../lufa/LUFA-git/Bootloaders/CDC/makefile | 55 - .../LUFA-git/Bootloaders/DFU/BootloaderAPI.c | 76 - .../LUFA-git/Bootloaders/DFU/BootloaderAPI.h | 58 - .../Bootloaders/DFU/BootloaderAPITable.S | 91 - .../LUFA-git/Bootloaders/DFU/BootloaderDFU.c | 804 ------ .../LUFA-git/Bootloaders/DFU/BootloaderDFU.h | 216 -- .../Bootloaders/DFU/BootloaderDFU.txt | 233 -- .../Bootloaders/DFU/Config/AppConfig.h | 48 - .../Bootloaders/DFU/Config/LUFAConfig.h | 93 - .../LUFA-git/Bootloaders/DFU/Descriptors.c | 185 -- .../LUFA-git/Bootloaders/DFU/Descriptors.h | 194 -- .../lufa/LUFA-git/Bootloaders/DFU/asf.xml | 156 -- .../lufa/LUFA-git/Bootloaders/DFU/doxyfile | 2365 ---------------- .../lufa/LUFA-git/Bootloaders/DFU/makefile | 55 - .../LUFA-git/Bootloaders/HID/BootloaderHID.c | 190 -- .../LUFA-git/Bootloaders/HID/BootloaderHID.h | 73 - .../Bootloaders/HID/BootloaderHID.txt | 105 - .../Bootloaders/HID/Config/LUFAConfig.h | 93 - .../LUFA-git/Bootloaders/HID/Descriptors.c | 187 -- .../LUFA-git/Bootloaders/HID/Descriptors.h | 80 - .../Bootloaders/HID/HostLoaderApp/Makefile | 39 - .../HID/HostLoaderApp/Makefile.bsd | 21 - .../Bootloaders/HID/HostLoaderApp/gpl3.txt | 674 ----- .../HID/HostLoaderApp/hid_bootloader_cli.c | 1010 ------- .../hid_bootloader_loader.py | 120 - .../lufa/LUFA-git/Bootloaders/HID/asf.xml | 123 - .../lufa/LUFA-git/Bootloaders/HID/doxyfile | 2367 ---------------- .../lufa/LUFA-git/Bootloaders/HID/makefile | 48 - .../Bootloaders/MassStorage/BootloaderAPI.c | 76 - .../Bootloaders/MassStorage/BootloaderAPI.h | 63 - .../MassStorage/BootloaderAPITable.S | 102 - .../MassStorage/BootloaderMassStorage.c | 238 -- .../MassStorage/BootloaderMassStorage.h | 99 - .../MassStorage/BootloaderMassStorage.txt | 225 -- .../MassStorage/Config/AppConfig.h | 47 - .../MassStorage/Config/LUFAConfig.h | 93 - .../Bootloaders/MassStorage/Descriptors.c | 157 -- .../Bootloaders/MassStorage/Descriptors.h | 88 - .../Bootloaders/MassStorage/Lib/SCSI.c | 294 -- .../Bootloaders/MassStorage/Lib/SCSI.h | 84 - .../Bootloaders/MassStorage/Lib/VirtualFAT.c | 482 ---- .../Bootloaders/MassStorage/Lib/VirtualFAT.h | 302 --- .../LUFA-git/Bootloaders/MassStorage/asf.xml | 156 -- .../LUFA-git/Bootloaders/MassStorage/doxyfile | 2365 ---------------- .../LUFA-git/Bootloaders/MassStorage/makefile | 68 - .../Bootloaders/Printer/BootloaderAPI.c | 75 - .../Bootloaders/Printer/BootloaderAPI.h | 56 - .../Bootloaders/Printer/BootloaderAPITable.S | 91 - .../Bootloaders/Printer/BootloaderPrinter.c | 431 --- .../Bootloaders/Printer/BootloaderPrinter.h | 108 - .../Bootloaders/Printer/BootloaderPrinter.txt | 190 -- .../Bootloaders/Printer/Config/LUFAConfig.h | 93 - .../Bootloaders/Printer/Descriptors.c | 194 -- .../Bootloaders/Printer/Descriptors.h | 96 - .../lufa/LUFA-git/Bootloaders/Printer/asf.xml | 159 -- .../LUFA-git/Bootloaders/Printer/doxyfile | 2365 ---------------- .../LUFA-git/Bootloaders/Printer/makefile | 55 - .../lufa/LUFA-git/Bootloaders/makefile | 46 - .../BuildTests/BoardDriverTest/Board/Board.h | 82 - .../BoardDriverTest/Board/Buttons.h | 92 - .../BoardDriverTest/Board/Dataflash.h | 197 -- .../BoardDriverTest/Board/Joystick.h | 104 - .../BuildTests/BoardDriverTest/Board/LEDs.h | 132 - .../BoardDriverTest/BoardDeviceMap.cfg | 87 - .../BuildTests/BoardDriverTest/Test.c | 115 - .../BuildTests/BoardDriverTest/makefile | 68 - .../BuildTests/BoardDriverTest/makefile.test | 27 - .../BootloaderTest/BootloaderDeviceMap.cfg | 167 -- .../BuildTests/BootloaderTest/makefile | 64 - .../LUFA-git/BuildTests/ModuleTest/Dummy.S | 41 - .../LUFA-git/BuildTests/ModuleTest/Modules.h | 56 - .../LUFA-git/BuildTests/ModuleTest/Test_C.c | 31 - .../BuildTests/ModuleTest/Test_CPP.cpp | 31 - .../LUFA-git/BuildTests/ModuleTest/makefile | 66 - .../BuildTests/ModuleTest/makefile.test | 88 - .../BuildTests/SingleUSBModeTest/Dummy.S | 42 - .../BuildTests/SingleUSBModeTest/Test.c | 32 - .../BuildTests/SingleUSBModeTest/makefile | 56 - .../SingleUSBModeTest/makefile.test | 69 - .../BuildTests/StaticAnalysisTest/makefile | 47 - .../lufa/LUFA-git/BuildTests/makefile | 24 - .../HID_EEPROM_Loader/HID_EEPROM_Loader.c | 61 - .../LUFA/Build/HID_EEPROM_Loader/makefile | 42 - .../LUFA-git/LUFA/Build/lufa_atprogram.mk | 103 - .../lufa/LUFA-git/LUFA/Build/lufa_avrdude.mk | 86 - .../lufa/LUFA-git/LUFA/Build/lufa_build.mk | 351 --- .../lufa/LUFA-git/LUFA/Build/lufa_core.mk | 175 -- .../lufa/LUFA-git/LUFA/Build/lufa_cppcheck.mk | 107 - .../lufa/LUFA-git/LUFA/Build/lufa_dfu.mk | 95 - .../lufa/LUFA-git/LUFA/Build/lufa_doxygen.mk | 100 - .../lufa/LUFA-git/LUFA/Build/lufa_hid.mk | 96 - .../lufa/LUFA-git/LUFA/Build/lufa_sources.mk | 144 - .../DeviceTemplate/Descriptors.c | 180 -- .../DeviceTemplate/Descriptors.h | 59 - .../DeviceTemplate/DeviceApplication.c | 106 - .../DeviceTemplate/DeviceApplication.h | 53 - .../LUFA/CodeTemplates/DeviceTemplate/asf.xml | 55 - .../LUFA/CodeTemplates/DriverStubs/Board.h | 82 - .../LUFA/CodeTemplates/DriverStubs/Buttons.h | 90 - .../CodeTemplates/DriverStubs/Dataflash.h | 223 -- .../LUFA/CodeTemplates/DriverStubs/Joystick.h | 102 - .../LUFA/CodeTemplates/DriverStubs/LEDs.h | 130 - .../HostTemplate/HostApplication.c | 133 - .../HostTemplate/HostApplication.h | 56 - .../LUFA/CodeTemplates/HostTemplate/asf.xml | 41 - .../LUFA-git/LUFA/CodeTemplates/LUFAConfig.h | 167 -- .../CodeTemplates/WindowsINF/LUFA CDC-ACM.inf | 64 - .../CodeTemplates/WindowsINF/LUFA RNDIS.inf | 59 - .../LUFA/CodeTemplates/makefile_template | 38 - .../LUFA/Common/ArchitectureSpecific.h | 185 -- .../lufa/LUFA-git/LUFA/Common/Architectures.h | 84 - .../lufa/LUFA-git/LUFA/Common/Attributes.h | 150 -- .../lufa/LUFA-git/LUFA/Common/BoardTypes.h | 254 -- .../lufa/LUFA-git/LUFA/Common/Common.h | 393 --- .../LUFA-git/LUFA/Common/CompilerSpecific.h | 97 - .../lufa/LUFA-git/LUFA/Common/Endianness.h | 493 ---- .../LUFA/DoxygenPages/BuildSystem.txt | 975 ------- .../BuildingLinkableLibraries.txt | 23 - .../LUFA-git/LUFA/DoxygenPages/ChangeLog.txt | 1597 ----------- .../LUFA/DoxygenPages/CompileTimeTokens.txt | 223 -- .../LUFA/DoxygenPages/CompilingApps.txt | 46 - .../LUFA/DoxygenPages/ConfiguringApps.txt | 157 -- .../LUFA/DoxygenPages/DevelopingWithLUFA.txt | 24 - .../LUFA/DoxygenPages/DeviceSupport.txt | 422 --- .../LUFA/DoxygenPages/DirectorySummaries.txt | 80 - .../LUFA-git/LUFA/DoxygenPages/Donating.txt | 26 - .../LUFA/DoxygenPages/ExportingLibrary.txt | 112 - .../LUFA/DoxygenPages/FutureChanges.txt | 47 - .../LUFA/DoxygenPages/GettingStarted.txt | 37 - .../LUFA-git/LUFA/DoxygenPages/Groups.txt | 38 - .../AS5_AS6_Import/AS5_AS6_Import_Step1.png | Bin 98201 -> 0 bytes .../AS5_AS6_Import/AS5_AS6_Import_Step2.png | Bin 100532 -> 0 bytes .../AS5_AS6_Import/AS5_AS6_Import_Step3.png | Bin 32987 -> 0 bytes .../AS5_AS6_Import/AS5_AS6_Import_Step4.png | Bin 161824 -> 0 bytes .../AS5_AS6_Import/AS5_AS6_Import_Step5_1.png | Bin 43666 -> 0 bytes .../AS5_AS6_Import/AS5_AS6_Import_Step5_2.png | Bin 28918 -> 0 bytes .../AS5_AS6_Import/AS5_AS6_Import_Step5_3.png | Bin 23561 -> 0 bytes .../LUFA/DoxygenPages/Images/Author.jpg | Bin 28410 -> 0 bytes .../LUFA/DoxygenPages/Images/LUFA.png | Bin 10296 -> 0 bytes .../LUFA/DoxygenPages/Images/LUFA_thumb.png | Bin 3729 -> 0 bytes .../LUFA/DoxygenPages/KnownIssues.txt | 170 -- .../LUFA/DoxygenPages/LUFAPoweredProjects.txt | 224 -- .../LUFA/DoxygenPages/LibraryResources.txt | 33 - .../LUFA/DoxygenPages/LicenseInfo.txt | 43 - .../LUFA-git/LUFA/DoxygenPages/MainPage.txt | 52 - .../DoxygenPages/MigrationInformation.txt | 708 ----- .../LUFA-git/LUFA/DoxygenPages/OSDrivers.txt | 111 - .../LUFA/DoxygenPages/ProgrammingApps.txt | 30 - .../DoxygenPages/SoftwareBootloaderJump.txt | 71 - .../LUFA/DoxygenPages/Style/Footer.htm | 35 - .../LUFA/DoxygenPages/Style/Style.css | 93 - .../LUFA/DoxygenPages/VIDAndPIDValues.txt | 199 -- .../LUFA/DoxygenPages/WritingBoardDrivers.txt | 47 - .../Drivers/Board/AVR8/ADAFRUITU4/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h | 135 - .../Drivers/Board/AVR8/ATAVRUSBRF01/Board.h | 82 - .../Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h | 103 - .../Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h | 139 - .../LUFA/Drivers/Board/AVR8/BENITO/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/BENITO/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/BENITO/LEDs.h | 139 - .../LUFA/Drivers/Board/AVR8/BIGMULTIO/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h | 161 -- .../LUFA/Drivers/Board/AVR8/BLACKCAT/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h | 139 - .../LUFA/Drivers/Board/AVR8/BUI/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/BUI/LEDs.h | 143 - .../LUFA/Drivers/Board/AVR8/BUMBLEB/Board.h | 86 - .../LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h | 105 - .../Drivers/Board/AVR8/BUMBLEB/Joystick.h | 123 - .../LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h | 149 -- .../LUFA/Drivers/Board/AVR8/CULV3/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/CULV3/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/CULV3/LEDs.h | 135 - .../LUFA/Drivers/Board/AVR8/DUCE/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/DUCE/LEDs.h | 147 - .../LUFA/Drivers/Board/AVR8/EVK527/Board.h | 90 - .../LUFA/Drivers/Board/AVR8/EVK527/Buttons.h | 103 - .../Drivers/Board/AVR8/EVK527/Dataflash.h | 222 -- .../LUFA/Drivers/Board/AVR8/EVK527/Joystick.h | 130 - .../LUFA/Drivers/Board/AVR8/EVK527/LEDs.h | 143 - .../LUFA/Drivers/Board/AVR8/JMDBU2/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h | 135 - .../LUFA/Drivers/Board/AVR8/LEONARDO/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/LEONARDO/LEDs.h | 169 -- .../LUFA/Drivers/Board/AVR8/MAXIMUS/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h | 139 - .../LUFA/Drivers/Board/AVR8/MICRO/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/MICRO/LEDs.h | 169 -- .../Drivers/Board/AVR8/MICROPENDOUS/Board.h | 149 -- .../Drivers/Board/AVR8/MICROPENDOUS/Buttons.h | 205 -- .../Drivers/Board/AVR8/MICROPENDOUS/LEDs.h | 174 -- .../Drivers/Board/AVR8/MICROSIN162/Board.h | 82 - .../Drivers/Board/AVR8/MICROSIN162/Buttons.h | 103 - .../Drivers/Board/AVR8/MICROSIN162/LEDs.h | 135 - .../LUFA/Drivers/Board/AVR8/MINIMUS/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h | 139 - .../LUFA/Drivers/Board/AVR8/MULTIO/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h | 161 -- .../LUFA/Drivers/Board/AVR8/OLIMEX162/Board.h | 82 - .../Drivers/Board/AVR8/OLIMEX162/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h | 135 - .../Drivers/Board/AVR8/OLIMEX32U4/Board.h | 82 - .../Drivers/Board/AVR8/OLIMEX32U4/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h | 179 -- .../Drivers/Board/AVR8/OLIMEXISPMK2/Board.h | 82 - .../Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h | 103 - .../Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h | 143 - .../Drivers/Board/AVR8/OLIMEXT32U4/Board.h | 82 - .../Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h | 103 - .../Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h | 169 -- .../Drivers/Board/AVR8/RZUSBSTICK/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h | 175 -- .../Drivers/Board/AVR8/SPARKFUN8U2/Board.h | 78 - .../Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h | 135 - .../Drivers/Board/AVR8/STANGE_ISP/Board.h | 82 - .../Drivers/Board/AVR8/STANGE_ISP/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/STANGE_ISP/LEDs.h | 138 - .../LUFA/Drivers/Board/AVR8/STK525/Board.h | 90 - .../LUFA/Drivers/Board/AVR8/STK525/Buttons.h | 103 - .../Drivers/Board/AVR8/STK525/Dataflash.h | 222 -- .../LUFA/Drivers/Board/AVR8/STK525/Joystick.h | 130 - .../LUFA/Drivers/Board/AVR8/STK525/LEDs.h | 147 - .../LUFA/Drivers/Board/AVR8/STK526/Board.h | 90 - .../LUFA/Drivers/Board/AVR8/STK526/Buttons.h | 103 - .../Drivers/Board/AVR8/STK526/Dataflash.h | 222 -- .../LUFA/Drivers/Board/AVR8/STK526/Joystick.h | 123 - .../LUFA/Drivers/Board/AVR8/STK526/LEDs.h | 147 - .../LUFA/Drivers/Board/AVR8/TEENSY/Board.h | 85 - .../LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h | 176 -- .../LUFA/Drivers/Board/AVR8/TUL/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/TUL/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/TUL/LEDs.h | 135 - .../LUFA/Drivers/Board/AVR8/U2S/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/U2S/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/U2S/LEDs.h | 135 - .../LUFA/Drivers/Board/AVR8/UDIP/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/UDIP/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/UDIP/LEDs.h | 163 -- .../LUFA/Drivers/Board/AVR8/UNO/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/UNO/LEDs.h | 139 - .../LUFA/Drivers/Board/AVR8/USB2AX/Board.h | 105 - .../LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h | 120 - .../LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h | 218 -- .../LUFA/Drivers/Board/AVR8/USBFOO/Board.h | 82 - .../LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h | 103 - .../LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h | 135 - .../LUFA/Drivers/Board/AVR8/USBKEY/Board.h | 90 - .../LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h | 103 - .../Drivers/Board/AVR8/USBKEY/Dataflash.h | 237 -- .../LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h | 130 - .../LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h | 147 - .../Drivers/Board/AVR8/USBTINYMKII/Board.h | 82 - .../Drivers/Board/AVR8/USBTINYMKII/Buttons.h | 103 - .../Drivers/Board/AVR8/USBTINYMKII/LEDs.h | 143 - .../LUFA/Drivers/Board/AVR8/XPLAIN/Board.h | 89 - .../Drivers/Board/AVR8/XPLAIN/Dataflash.h | 245 -- .../LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h | 142 - .../LUFA/Drivers/Board/AVR8/YUN/Board.h | 78 - .../LUFA/Drivers/Board/AVR8/YUN/LEDs.h | 169 -- .../lufa/LUFA-git/LUFA/Drivers/Board/Board.h | 167 -- .../LUFA-git/LUFA/Drivers/Board/Buttons.h | 188 -- .../LUFA-git/LUFA/Drivers/Board/Dataflash.h | 264 -- .../LUFA-git/LUFA/Drivers/Board/Joystick.h | 151 -- .../lufa/LUFA-git/LUFA/Drivers/Board/LEDs.h | 298 --- .../LUFA-git/LUFA/Drivers/Board/Temperature.c | 66 - .../LUFA-git/LUFA/Drivers/Board/Temperature.h | 147 - .../LUFA/Drivers/Board/UC3/EVK1100/Board.h | 86 - .../LUFA/Drivers/Board/UC3/EVK1100/Buttons.h | 117 - .../LUFA/Drivers/Board/UC3/EVK1100/Joystick.h | 122 - .../LUFA/Drivers/Board/UC3/EVK1100/LEDs.h | 173 -- .../LUFA/Drivers/Board/UC3/EVK1101/Board.h | 86 - .../LUFA/Drivers/Board/UC3/EVK1101/Buttons.h | 113 - .../LUFA/Drivers/Board/UC3/EVK1101/Joystick.h | 131 - .../LUFA/Drivers/Board/UC3/EVK1101/LEDs.h | 156 -- .../LUFA/Drivers/Board/UC3/EVK1104/Board.h | 82 - .../LUFA/Drivers/Board/UC3/EVK1104/Buttons.h | 109 - .../LUFA/Drivers/Board/UC3/EVK1104/LEDs.h | 174 -- .../Drivers/Board/UC3/UC3A3_XPLAINED/Board.h | 82 - .../Board/UC3/UC3A3_XPLAINED/Buttons.h | 109 - .../Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h | 182 -- .../Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h | 86 - .../Board/XMEGA/A3BU_XPLAINED/Buttons.h | 119 - .../Board/XMEGA/A3BU_XPLAINED/Dataflash.h | 228 -- .../Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h | 181 -- .../Drivers/Board/XMEGA/B1_XPLAINED/Board.h | 86 - .../Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h | 119 - .../Board/XMEGA/B1_XPLAINED/Dataflash.h | 229 -- .../Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h | 183 -- .../Drivers/Board/XMEGA/C3_XPLAINED/Board.h | 83 - .../Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h | 109 - .../Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h | 181 -- .../LUFA-git/LUFA/Drivers/Misc/AT45DB321C.h | 100 - .../LUFA-git/LUFA/Drivers/Misc/AT45DB642D.h | 116 - .../LUFA-git/LUFA/Drivers/Misc/RingBuffer.h | 308 --- .../LUFA/Drivers/Misc/TerminalCodes.h | 231 -- .../LUFA-git/LUFA/Drivers/Peripheral/ADC.h | 75 - .../LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h | 446 ---- .../LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h | 258 -- .../Drivers/Peripheral/AVR8/SerialSPI_AVR8.h | 208 -- .../Drivers/Peripheral/AVR8/Serial_AVR8.c | 119 - .../Drivers/Peripheral/AVR8/Serial_AVR8.h | 270 -- .../LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c | 209 -- .../LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h | 305 --- .../LUFA-git/LUFA/Drivers/Peripheral/SPI.h | 76 - .../LUFA-git/LUFA/Drivers/Peripheral/Serial.h | 76 - .../LUFA/Drivers/Peripheral/SerialSPI.h | 76 - .../LUFA-git/LUFA/Drivers/Peripheral/TWI.h | 76 - .../LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h | 251 -- .../Peripheral/XMEGA/SerialSPI_XMEGA.h | 212 -- .../Drivers/Peripheral/XMEGA/Serial_XMEGA.c | 122 - .../Drivers/Peripheral/XMEGA/Serial_XMEGA.h | 286 -- .../LUFA/Drivers/Peripheral/XMEGA/TWI_XMEGA.c | 185 -- .../LUFA/Drivers/Peripheral/XMEGA/TWI_XMEGA.h | 302 --- .../Drivers/USB/Class/AndroidAccessoryClass.h | 77 - .../LUFA/Drivers/USB/Class/AudioClass.h | 81 - .../LUFA/Drivers/USB/Class/CDCClass.h | 81 - .../Common/AndroidAccessoryClassCommon.h | 129 - .../USB/Class/Common/AudioClassCommon.h | 780 ------ .../Drivers/USB/Class/Common/CDCClassCommon.h | 391 --- .../Drivers/USB/Class/Common/HIDClassCommon.h | 682 ----- .../LUFA/Drivers/USB/Class/Common/HIDParser.c | 389 --- .../LUFA/Drivers/USB/Class/Common/HIDParser.h | 364 --- .../Drivers/USB/Class/Common/HIDReportData.h | 126 - .../USB/Class/Common/MIDIClassCommon.h | 363 --- .../USB/Class/Common/MassStorageClassCommon.h | 368 --- .../USB/Class/Common/PrinterClassCommon.h | 119 - .../USB/Class/Common/RNDISClassCommon.h | 411 --- .../USB/Class/Common/StillImageClassCommon.h | 161 -- .../USB/Class/Device/AudioClassDevice.c | 197 -- .../USB/Class/Device/AudioClassDevice.h | 396 --- .../Drivers/USB/Class/Device/CDCClassDevice.c | 341 --- .../Drivers/USB/Class/Device/CDCClassDevice.h | 352 --- .../Drivers/USB/Class/Device/HIDClassDevice.c | 211 -- .../Drivers/USB/Class/Device/HIDClassDevice.h | 210 -- .../USB/Class/Device/MIDIClassDevice.c | 131 - .../USB/Class/Device/MIDIClassDevice.h | 175 -- .../USB/Class/Device/MassStorageClassDevice.c | 215 -- .../USB/Class/Device/MassStorageClassDevice.h | 161 -- .../USB/Class/Device/PrinterClassDevice.c | 314 --- .../USB/Class/Device/PrinterClassDevice.h | 293 -- .../USB/Class/Device/RNDISClassDevice.c | 508 ---- .../USB/Class/Device/RNDISClassDevice.h | 207 -- .../LUFA/Drivers/USB/Class/HIDClass.h | 82 - .../Class/Host/AndroidAccessoryClassHost.c | 422 --- .../Class/Host/AndroidAccessoryClassHost.h | 314 --- .../Drivers/USB/Class/Host/AudioClassHost.c | 223 -- .../Drivers/USB/Class/Host/AudioClassHost.h | 411 --- .../Drivers/USB/Class/Host/CDCClassHost.c | 477 ---- .../Drivers/USB/Class/Host/CDCClassHost.h | 351 --- .../Drivers/USB/Class/Host/HIDClassHost.c | 399 --- .../Drivers/USB/Class/Host/HIDClassHost.h | 313 --- .../Drivers/USB/Class/Host/MIDIClassHost.c | 231 -- .../Drivers/USB/Class/Host/MIDIClassHost.h | 190 -- .../USB/Class/Host/MassStorageClassHost.c | 579 ---- .../USB/Class/Host/MassStorageClassHost.h | 335 --- .../Drivers/USB/Class/Host/PrinterClassHost.c | 400 --- .../Drivers/USB/Class/Host/PrinterClassHost.h | 285 -- .../Drivers/USB/Class/Host/RNDISClassHost.c | 476 ---- .../Drivers/USB/Class/Host/RNDISClassHost.h | 270 -- .../USB/Class/Host/StillImageClassHost.c | 436 --- .../USB/Class/Host/StillImageClassHost.h | 317 --- .../LUFA/Drivers/USB/Class/MIDIClass.h | 84 - .../LUFA/Drivers/USB/Class/MassStorageClass.h | 81 - .../LUFA/Drivers/USB/Class/PrinterClass.h | 83 - .../LUFA/Drivers/USB/Class/RNDISClass.h | 81 - .../LUFA/Drivers/USB/Class/StillImageClass.h | 76 - .../LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c | 57 - .../LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h | 269 -- .../USB/Core/AVR8/EndpointStream_AVR8.c | 275 -- .../USB/Core/AVR8/EndpointStream_AVR8.h | 658 ----- .../Drivers/USB/Core/AVR8/Endpoint_AVR8.c | 201 -- .../Drivers/USB/Core/AVR8/Endpoint_AVR8.h | 819 ------ .../LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c | 297 --- .../LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h | 372 --- .../LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h | 159 -- .../Drivers/USB/Core/AVR8/PipeStream_AVR8.c | 221 -- .../Drivers/USB/Core/AVR8/PipeStream_AVR8.h | 442 --- .../LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c | 210 -- .../LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h | 922 ------- .../Template/Template_Endpoint_Control_R.c | 84 - .../Template/Template_Endpoint_Control_W.c | 95 - .../Core/AVR8/Template/Template_Endpoint_RW.c | 89 - .../USB/Core/AVR8/Template/Template_Pipe_RW.c | 88 - .../USB/Core/AVR8/USBController_AVR8.c | 273 -- .../USB/Core/AVR8/USBController_AVR8.h | 432 --- .../Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c | 279 -- .../Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h | 375 --- .../LUFA/Drivers/USB/Core/ConfigDescriptors.c | 146 - .../LUFA/Drivers/USB/Core/ConfigDescriptors.h | 287 -- .../LUFA-git/LUFA/Drivers/USB/Core/Device.h | 159 -- .../LUFA/Drivers/USB/Core/DeviceStandardReq.c | 380 --- .../LUFA/Drivers/USB/Core/DeviceStandardReq.h | 158 -- .../LUFA-git/LUFA/Drivers/USB/Core/Endpoint.h | 130 - .../LUFA/Drivers/USB/Core/EndpointStream.h | 124 - .../LUFA-git/LUFA/Drivers/USB/Core/Events.c | 39 - .../LUFA-git/LUFA/Drivers/USB/Core/Events.h | 372 --- .../LUFA-git/LUFA/Drivers/USB/Core/Host.h | 139 - .../LUFA/Drivers/USB/Core/HostStandardReq.c | 322 --- .../LUFA/Drivers/USB/Core/HostStandardReq.h | 292 -- .../lufa/LUFA-git/LUFA/Drivers/USB/Core/OTG.h | 80 - .../LUFA-git/LUFA/Drivers/USB/Core/Pipe.h | 144 - .../LUFA/Drivers/USB/Core/PipeStream.h | 100 - .../LUFA/Drivers/USB/Core/StdDescriptors.h | 765 ------ .../LUFA/Drivers/USB/Core/StdRequestType.h | 258 -- .../LUFA/Drivers/USB/Core/UC3/Device_UC3.c | 51 - .../LUFA/Drivers/USB/Core/UC3/Device_UC3.h | 267 -- .../Drivers/USB/Core/UC3/EndpointStream_UC3.c | 235 -- .../Drivers/USB/Core/UC3/EndpointStream_UC3.h | 438 --- .../LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c | 196 -- .../LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h | 794 ------ .../LUFA/Drivers/USB/Core/UC3/Host_UC3.c | 297 --- .../LUFA/Drivers/USB/Core/UC3/Host_UC3.h | 363 --- .../Drivers/USB/Core/UC3/PipeStream_UC3.c | 166 -- .../Drivers/USB/Core/UC3/PipeStream_UC3.h | 352 --- .../LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c | 209 -- .../LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h | 924 ------- .../Template/Template_Endpoint_Control_R.c | 84 - .../Template/Template_Endpoint_Control_W.c | 95 - .../Core/UC3/Template/Template_Endpoint_RW.c | 89 - .../USB/Core/UC3/Template/Template_Pipe_RW.c | 88 - .../Drivers/USB/Core/UC3/USBController_UC3.c | 222 -- .../Drivers/USB/Core/UC3/USBController_UC3.h | 353 --- .../Drivers/USB/Core/UC3/USBInterrupt_UC3.c | 228 -- .../Drivers/USB/Core/UC3/USBInterrupt_UC3.h | 376 --- .../LUFA/Drivers/USB/Core/USBController.h | 165 -- .../LUFA/Drivers/USB/Core/USBInterrupt.h | 73 - .../LUFA-git/LUFA/Drivers/USB/Core/USBMode.h | 283 -- .../LUFA-git/LUFA/Drivers/USB/Core/USBTask.c | 89 - .../LUFA-git/LUFA/Drivers/USB/Core/USBTask.h | 200 -- .../Drivers/USB/Core/XMEGA/Device_XMEGA.c | 49 - .../Drivers/USB/Core/XMEGA/Device_XMEGA.h | 266 -- .../USB/Core/XMEGA/EndpointStream_XMEGA.c | 275 -- .../USB/Core/XMEGA/EndpointStream_XMEGA.h | 658 ----- .../Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c | 268 -- .../Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h | 689 ----- .../LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c | 41 - .../Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c | 41 - .../LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c | 37 - .../Template/Template_Endpoint_Control_R.c | 86 - .../Template/Template_Endpoint_Control_W.c | 97 - .../XMEGA/Template/Template_Endpoint_RW.c | 89 - .../USB/Core/XMEGA/USBController_XMEGA.c | 204 -- .../USB/Core/XMEGA/USBController_XMEGA.h | 313 --- .../USB/Core/XMEGA/USBInterrupt_XMEGA.c | 106 - .../USB/Core/XMEGA/USBInterrupt_XMEGA.h | 172 -- .../lufa/LUFA-git/LUFA/Drivers/USB/USB.h | 422 --- .../protocol/lufa/LUFA-git/LUFA/License.txt | 24 - .../lufa/LUFA-git/LUFA/Platform/Platform.h | 80 - .../LUFA/Platform/UC3/ClockManagement.h | 338 --- .../LUFA-git/LUFA/Platform/UC3/Exception.S | 128 - .../LUFA/Platform/UC3/InterruptManagement.c | 62 - .../LUFA/Platform/UC3/InterruptManagement.h | 174 -- .../LUFA/Platform/UC3/UC3ExperimentalInfo.txt | 1 - .../LUFA/Platform/XMEGA/ClockManagement.h | 397 --- .../Platform/XMEGA/XMEGAExperimentalInfo.txt | 1 - .../Docbook/mshelp/placeholder.txt | 1 - .../StudioIntegration/Docbook/placeholder.txt | 1 - .../HV1/helpcontentsetup.msha | 27 - .../HV1/lufa_docbook_transform.xslt | 808 ------ .../HV1/lufa_helpcontentsetup_transform.xslt | 43 - .../HV1/lufa_hv1_transform.xslt | 45 - .../HV1/lufa_studio_help_styling.css | 53 - .../ProjectGenerator/placeholder.txt | 1 - .../LUFA/StudioIntegration/VSIX/LUFA.dll | Bin 749056 -> 0 bytes .../LUFA/StudioIntegration/VSIX/LUFA.pkgdef | Bin 2242 -> 0 bytes .../VSIX/[Content_Types].xml | 13 - .../StudioIntegration/VSIX/asf-manifest.xml | 18 - .../VSIX/extension.vsixmanifest | 33 - .../StudioIntegration/VSIX/generate_caches.py | 38 - .../VSIX/lufa_asfmanifest_transform.xslt | 36 - .../VSIX/lufa_vsmanifest_transform.xslt | 33 - .../XDK/lufa_extension_transform.xslt | 68 - .../XDK/lufa_filelist_transform.xslt | 35 - .../XDK/lufa_indent_transform.xslt | 23 - .../XDK/lufa_module_transform.xslt | 66 - .../LUFA-git/LUFA/StudioIntegration/lufa.xml | 96 - .../LUFA/StudioIntegration/lufa_common.xml | 34 - .../StudioIntegration/lufa_drivers_board.xml | 114 - .../lufa_drivers_board_names.xml | 853 ------ .../StudioIntegration/lufa_drivers_misc.xml | 57 - .../lufa_drivers_peripheral.xml | 198 -- .../StudioIntegration/lufa_drivers_usb.xml | 32 - .../lufa_drivers_usb_class.xml | 32 - .../lufa_drivers_usb_class_android.xml | 54 - .../lufa_drivers_usb_class_audio.xml | 109 - .../lufa_drivers_usb_class_cdc.xml | 99 - .../lufa_drivers_usb_class_hid.xml | 99 - .../lufa_drivers_usb_class_midi.xml | 99 - .../lufa_drivers_usb_class_ms.xml | 99 - .../lufa_drivers_usb_class_printer.xml | 99 - .../lufa_drivers_usb_class_rndis.xml | 99 - .../lufa_drivers_usb_class_si.xml | 56 - .../lufa_drivers_usb_core.xml | 85 - .../lufa_drivers_usb_core_avr8.xml | 43 - .../lufa_drivers_usb_core_uc3.xml | 42 - .../lufa_drivers_usb_core_xmega.xml | 36 - .../LUFA/StudioIntegration/lufa_platform.xml | 60 - .../StudioIntegration/lufa_platform_uc3.xml | 26 - .../StudioIntegration/lufa_platform_xmega.xml | 23 - .../LUFA/StudioIntegration/lufa_toolchain.xml | 43 - .../LUFA-git/LUFA/StudioIntegration/makefile | 140 - .../protocol/lufa/LUFA-git/LUFA/Version.h | 52 - tmk_core/protocol/lufa/LUFA-git/LUFA/doxyfile | 2368 ----------------- tmk_core/protocol/lufa/LUFA-git/LUFA/makefile | 53 - .../lufa_functionlist_transform.xslt | 19 - .../lufa/LUFA-git/Maintenance/makefile | 94 - tmk_core/protocol/lufa/LUFA-git/README.txt | 56 - tmk_core/protocol/lufa/LUFA-git/makefile | 26 - 529 files changed, 276 insertions(+), 101490 deletions(-) delete mode 100644 tmk_core/protocol/lufa/LUFA-git/.gitignore delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderAPI.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderAPI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderAPITable.S delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderDFU.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderDFU.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderDFU.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/Config/AppConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/Config/LUFAConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/Descriptors.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/Descriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/doxyfile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/BootloaderHID.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/BootloaderHID.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/BootloaderHID.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/Config/LUFAConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/Descriptors.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/Descriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/HostLoaderApp/Makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/HostLoaderApp/Makefile.bsd delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/HostLoaderApp/gpl3.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/HostLoaderApp/hid_bootloader_cli.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/HostLoaderApp_Python/hid_bootloader_loader.py delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/doxyfile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPI.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Config/AppConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Config/LUFAConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Descriptors.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Descriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/doxyfile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPI.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderPrinter.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderPrinter.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderPrinter.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/Config/LUFAConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/Descriptors.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/Descriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/doxyfile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/BoardDeviceMap.cfg delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Test.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile.test delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Dummy.S delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Modules.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_C.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_CPP.cpp delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile.test delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Dummy.S delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Test.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile.test delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/StaticAnalysisTest/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/BuildTests/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/HID_EEPROM_Loader.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_atprogram.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_avrdude.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_build.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_core.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_cppcheck.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_dfu.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_doxygen.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_hid.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Build/lufa_sources.mk delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/LUFAConfig.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA CDC-ACM.inf delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA RNDIS.inf delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/makefile_template delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Architectures.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Attributes.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Common.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Endianness.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildingLinkableLibraries.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/ChangeLog.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/CompileTimeTokens.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/CompilingApps.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/ConfiguringApps.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/DevelopingWithLUFA.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/DeviceSupport.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/DirectorySummaries.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Donating.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/ExportingLibrary.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/FutureChanges.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/GettingStarted.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Groups.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step1.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step2.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step3.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step4.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_1.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_2.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_3.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/Author.jpg delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/LUFA.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Images/LUFA_thumb.png delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/LUFAPoweredProjects.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/LibraryResources.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/LicenseInfo.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/MainPage.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/MigrationInformation.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/OSDrivers.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/ProgrammingApps.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/SoftwareBootloaderJump.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Style/Footer.htm delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/Style/Style.css delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/VIDAndPIDValues.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/WritingBoardDrivers.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/ADAFRUITU4/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BENITO/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BIGMULTIO/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BLACKCAT/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BUI/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BUI/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BUMBLEB/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/CULV3/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/DUCE/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/DUCE/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/EVK527/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/JMDBU2/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/LEONARDO/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/LEONARDO/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MAXIMUS/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICRO/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICRO/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICROSIN162/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MINIMUS/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MULTIO/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEX162/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/RZUSBSTICK/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STANGE_ISP/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STANGE_ISP/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STANGE_ISP/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK525/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK525/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK525/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK525/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK526/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK526/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK526/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/STK526/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/TEENSY/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/TUL/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/TUL/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/TUL/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/U2S/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/U2S/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/U2S/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/UDIP/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/UNO/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/UNO/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USB2AX/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBFOO/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBKEY/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBTINYMKII/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/XPLAIN/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/YUN/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/AVR8/YUN/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/Temperature.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/Temperature.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1100/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1101/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1104/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/UC3A3_XPLAINED/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/UC3A3_XPLAINED/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/C3_XPLAINED/Board.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Misc/AT45DB321C.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Misc/AT45DB642D.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Misc/RingBuffer.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Misc/TerminalCodes.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/ADC.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/SPI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/Serial.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/SerialSPI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/TWI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/XMEGA/TWI_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/XMEGA/TWI_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/AndroidAccessoryClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/AudioClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/CDCClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDReportData.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/StillImageClassCommon.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/PrinterClassDevice.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/HIDClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/AudioClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/AudioClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/CDCClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/CDCClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/HIDClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/HIDClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/MIDIClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/MassStorageClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/PrinterClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/RNDISClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/StillImageClass.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Device.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Endpoint.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/EndpointStream.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Host.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/OTG.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Pipe.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/PipeStream.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/StdDescriptors.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/StdRequestType.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Device_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Device_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Host_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Host_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBController.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBInterrupt.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBMode.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/USB.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/License.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/Platform.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/UC3/ClockManagement.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/UC3/Exception.S delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/UC3/InterruptManagement.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/UC3/InterruptManagement.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/UC3/UC3ExperimentalInfo.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/XMEGA/ClockManagement.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Platform/XMEGA/XMEGAExperimentalInfo.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/helpcontentsetup.msha delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_docbook_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_helpcontentsetup_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/ProjectGenerator/placeholder.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/LUFA.dll delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/LUFA.pkgdef delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/lufa_asfmanifest_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/lufa_vsmanifest_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/XDK/lufa_extension_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/XDK/lufa_filelist_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/XDK/lufa_indent_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/XDK/lufa_module_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_android.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_audio.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_cdc.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_hid.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_midi.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_ms.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_printer.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_rndis.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class_si.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Version.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/doxyfile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Maintenance/lufa_functionlist_transform.xslt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Maintenance/makefile delete mode 100644 tmk_core/protocol/lufa/LUFA-git/README.txt delete mode 100644 tmk_core/protocol/lufa/LUFA-git/makefile diff --git a/lib/lufa/Projects/TempDataLogger/asf.xml b/lib/lufa/Projects/TempDataLogger/asf.xml index bf7ee2c3f..ca08c55b4 100644 --- a/lib/lufa/Projects/TempDataLogger/asf.xml +++ b/lib/lufa/Projects/TempDataLogger/asf.xml @@ -1,72 +1,72 @@ - - - - - - - - - - - - - - - - Temperature Datalogger project. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + Temperature Datalogger project. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/lib/lufa/Projects/USBtoSerial/asf.xml b/lib/lufa/Projects/USBtoSerial/asf.xml index 5afcafe7c..13f9ba8fb 100644 --- a/lib/lufa/Projects/USBtoSerial/asf.xml +++ b/lib/lufa/Projects/USBtoSerial/asf.xml @@ -1,51 +1,51 @@ - - - - - - - - - - - - - - - - USB to Serial USART converter project. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + USB to Serial USART converter project. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/lib/lufa/Projects/Webserver/asf.xml b/lib/lufa/Projects/Webserver/asf.xml index ea6b4c66f..ca1733e85 100644 --- a/lib/lufa/Projects/Webserver/asf.xml +++ b/lib/lufa/Projects/Webserver/asf.xml @@ -1,96 +1,96 @@ - - - - - - - - - - - - - - - - RNDIS Webserver project, using the open source uIP network stack. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + RNDIS Webserver project, using the open source uIP network stack. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/lib/lufa/Projects/XPLAINBridge/asf.xml b/lib/lufa/Projects/XPLAINBridge/asf.xml index dfdf46b90..3530332ba 100644 --- a/lib/lufa/Projects/XPLAINBridge/asf.xml +++ b/lib/lufa/Projects/XPLAINBridge/asf.xml @@ -1,57 +1,57 @@ - - - - - - - - - - - - - - - - Bridge firmware for the original (green) XPLAIN board, for programming and USB virtual serial communications. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + Bridge firmware for the original (green) XPLAIN board, for programming and USB virtual serial communications. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/tmk_core/protocol/lufa/LUFA-git/.gitignore b/tmk_core/protocol/lufa/LUFA-git/.gitignore deleted file mode 100644 index 045f96980..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/.gitignore +++ /dev/null @@ -1,14 +0,0 @@ -*.o -*.d -*.elf -*.hex -*.eep -*.sym -*.bin -*.lss -*.map -*.bak -*.class -Documentation/ -LUFA/StudioIntegration/ProjectGenerator/* -LUFA/StudioIntegration/DocBook/* diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c deleted file mode 100644 index f7564e982..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Bootloader user application API functions. - */ - -#include "BootloaderAPI.h" - -void BootloaderAPI_ErasePage(const uint32_t Address) -{ - boot_page_erase_safe(Address); - boot_spm_busy_wait(); - boot_rww_enable(); -} - -void BootloaderAPI_WritePage(const uint32_t Address) -{ - boot_page_write_safe(Address); - boot_spm_busy_wait(); - boot_rww_enable(); -} - -void BootloaderAPI_FillWord(const uint32_t Address, const uint16_t Word) -{ - boot_page_fill_safe(Address, Word); -} - -uint8_t BootloaderAPI_ReadSignature(const uint16_t Address) -{ - return boot_signature_byte_get(Address); -} - -uint8_t BootloaderAPI_ReadFuse(const uint16_t Address) -{ - return boot_lock_fuse_bits_get(Address); -} - -uint8_t BootloaderAPI_ReadLock(void) -{ - return boot_lock_fuse_bits_get(GET_LOCK_BITS); -} - -void BootloaderAPI_WriteLock(const uint8_t LockBits) -{ - boot_lock_bits_set_safe(LockBits); -} diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h deleted file mode 100644 index 2462cacdd..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BootloaderAPI.c. - */ - -#ifndef _BOOTLOADER_API_H_ -#define _BOOTLOADER_API_H_ - - /* Includes: */ - #include - #include - #include - - #include - - #include "Config/AppConfig.h" - - /* Function Prototypes: */ - void BootloaderAPI_ErasePage(const uint32_t Address); - void BootloaderAPI_WritePage(const uint32_t Address); - void BootloaderAPI_FillWord(const uint32_t Address, const uint16_t Word); - uint8_t BootloaderAPI_ReadSignature(const uint16_t Address); - uint8_t BootloaderAPI_ReadFuse(const uint16_t Address); - uint8_t BootloaderAPI_ReadLock(void); - void BootloaderAPI_WriteLock(const uint8_t LockBits); - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S deleted file mode 100644 index 69ebd387a..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -; Trampolines to actual API implementations if the target address is outside the -; range of a rjmp instruction (can happen with large bootloader sections) -.section .apitable_trampolines, "ax" -.global BootloaderAPI_Trampolines -BootloaderAPI_Trampolines: - - BootloaderAPI_ErasePage_Trampoline: - jmp BootloaderAPI_ErasePage - BootloaderAPI_WritePage_Trampoline: - jmp BootloaderAPI_WritePage - BootloaderAPI_FillWord_Trampoline: - jmp BootloaderAPI_FillWord - BootloaderAPI_ReadSignature_Trampoline: - jmp BootloaderAPI_ReadSignature - BootloaderAPI_ReadFuse_Trampoline: - jmp BootloaderAPI_ReadFuse - BootloaderAPI_ReadLock_Trampoline: - jmp BootloaderAPI_ReadLock - BootloaderAPI_WriteLock_Trampoline: - jmp BootloaderAPI_WriteLock - BootloaderAPI_UNUSED1: - ret - BootloaderAPI_UNUSED2: - ret - BootloaderAPI_UNUSED3: - ret - BootloaderAPI_UNUSED4: - ret - BootloaderAPI_UNUSED5: - ret - - - -; API function jump table -.section .apitable_jumptable, "ax" -.global BootloaderAPI_JumpTable -BootloaderAPI_JumpTable: - - rjmp BootloaderAPI_ErasePage_Trampoline - rjmp BootloaderAPI_WritePage_Trampoline - rjmp BootloaderAPI_FillWord_Trampoline - rjmp BootloaderAPI_ReadSignature_Trampoline - rjmp BootloaderAPI_ReadFuse_Trampoline - rjmp BootloaderAPI_ReadLock_Trampoline - rjmp BootloaderAPI_WriteLock_Trampoline - rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1 - rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2 - rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3 - rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4 - rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5 - - - -; Bootloader table signatures and information -.section .apitable_signatures, "ax" -.global BootloaderAPI_Signatures -BootloaderAPI_Signatures: - - .long BOOT_START_ADDR ; Start address of the bootloader - .word 0xDF00 ; Signature for the CDC class bootloader - .word 0xDCFB ; Signature for a LUFA class bootloader diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c deleted file mode 100644 index 58bb33892..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c +++ /dev/null @@ -1,641 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the CDC class bootloader. This file contains the complete bootloader logic. - */ - -#define INCLUDE_FROM_BOOTLOADERCDC_C -#include "BootloaderCDC.h" - -/** Contains the current baud rate and other settings of the first virtual serial port. This must be retained as some - * operating systems will not open the port unless the settings can be set successfully. - */ -static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0, - .CharFormat = CDC_LINEENCODING_OneStopBit, - .ParityType = CDC_PARITY_None, - .DataBits = 8 }; - -/** Current address counter. This stores the current address of the FLASH or EEPROM as set by the host, - * and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued - * command.) - */ -static uint32_t CurrAddress; - -/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run - * via a watchdog reset. When cleared the bootloader will exit, starting the watchdog and entering an infinite - * loop until the AVR restarts and the application runs. - */ -static bool RunBootloader = true; - -/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader - * will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held - * low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value - * \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start. - */ -uint16_t MagicBootKey ATTR_NO_INIT; - - -/** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application - * start key has been loaded into \ref MagicBootKey. If the bootloader started via the watchdog and the key is valid, - * this will force the user application to start via a software jump. - */ -void Application_Jump_Check(void) -{ - bool JumpToApplication = false; - - #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) - /* Disable JTAG debugging */ - JTAG_DISABLE(); - - /* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */ - PORTF |= (1 << 4); - Delay_MS(10); - - /* If the TCK pin is not jumpered to ground, start the user application instead */ - JumpToApplication |= ((PINF & (1 << 4)) != 0); - - /* Re-enable JTAG debugging */ - JTAG_ENABLE(); - #endif - - /* If the reset source was the bootloader and the key is correct, clear it and jump to the application */ - if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY)) - JumpToApplication |= true; - - /* If a request has been made to jump to the user application, honor it */ - if (JumpToApplication) - { - /* Turn off the watchdog */ - MCUSR &= ~(1< 0xFFFF) - WriteNextResponseByte(pgm_read_byte_far(CurrAddress | HighByte)); - #else - WriteNextResponseByte(pgm_read_byte(CurrAddress | HighByte)); - #endif - - /* If both bytes in current word have been read, increment the address counter */ - if (HighByte) - CurrAddress += 2; - - HighByte = !HighByte; - } - else - { - /* Read the next EEPROM byte into the endpoint */ - WriteNextResponseByte(eeprom_read_byte((uint8_t*)(intptr_t)(CurrAddress >> 1))); - - /* Increment the address counter after use */ - CurrAddress += 2; - } - } - } - else - { - uint32_t PageStartAddress = CurrAddress; - - if (MemoryType == MEMORY_TYPE_FLASH) - { - boot_page_erase(PageStartAddress); - boot_spm_busy_wait(); - } - - while (BlockSize--) - { - if (MemoryType == MEMORY_TYPE_FLASH) - { - /* If both bytes in current word have been written, increment the address counter */ - if (HighByte) - { - /* Write the next FLASH word to the current FLASH page */ - boot_page_fill(CurrAddress, ((FetchNextCommandByte() << 8) | LowByte)); - - /* Increment the address counter after use */ - CurrAddress += 2; - } - else - { - LowByte = FetchNextCommandByte(); - } - - HighByte = !HighByte; - } - else - { - /* Write the next EEPROM byte from the endpoint */ - eeprom_update_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte()); - - /* Increment the address counter after use */ - CurrAddress += 2; - } - } - - /* If in FLASH programming mode, commit the page after writing */ - if (MemoryType == MEMORY_TYPE_FLASH) - { - /* Commit the flash page to memory */ - boot_page_write(PageStartAddress); - - /* Wait until write operation has completed */ - boot_spm_busy_wait(); - } - - /* Send response byte back to the host */ - WriteNextResponseByte('\r'); - } -} -#endif - -/** Retrieves the next byte from the host in the CDC data OUT endpoint, and clears the endpoint bank if needed - * to allow reception of the next data packet from the host. - * - * \return Next received byte from the host in the CDC data OUT endpoint - */ -static uint8_t FetchNextCommandByte(void) -{ - /* Select the OUT endpoint so that the next data byte can be read */ - Endpoint_SelectEndpoint(CDC_RX_EPADDR); - - /* If OUT endpoint empty, clear it and wait for the next packet from the host */ - while (!(Endpoint_IsReadWriteAllowed())) - { - Endpoint_ClearOUT(); - - while (!(Endpoint_IsOUTReceived())) - { - if (USB_DeviceState == DEVICE_STATE_Unattached) - return 0; - } - } - - /* Fetch the next byte from the OUT endpoint */ - return Endpoint_Read_8(); -} - -/** Writes the next response byte to the CDC data IN endpoint, and sends the endpoint back if needed to free up the - * bank when full ready for the next byte in the packet to the host. - * - * \param[in] Response Next response byte to send to the host - */ -static void WriteNextResponseByte(const uint8_t Response) -{ - /* Select the IN endpoint so that the next data byte can be written */ - Endpoint_SelectEndpoint(CDC_TX_EPADDR); - - /* If IN endpoint full, clear it and wait until ready for the next packet to the host */ - if (!(Endpoint_IsReadWriteAllowed())) - { - Endpoint_ClearIN(); - - while (!(Endpoint_IsINReady())) - { - if (USB_DeviceState == DEVICE_STATE_Unattached) - return; - } - } - - /* Write the next byte to the IN endpoint */ - Endpoint_Write_8(Response); -} - -/** Task to read in AVR109 commands from the CDC data OUT endpoint, process them, perform the required actions - * and send the appropriate response back to the host. - */ -static void CDC_Task(void) -{ - /* Select the OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPADDR); - - /* Check if endpoint has a command in it sent from the host */ - if (!(Endpoint_IsOUTReceived())) - return; - - /* Read in the bootloader command (first byte sent from host) */ - uint8_t Command = FetchNextCommandByte(); - - if (Command == AVR109_COMMAND_ExitBootloader) - { - RunBootloader = false; - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if ((Command == AVR109_COMMAND_SetLED) || (Command == AVR109_COMMAND_ClearLED) || - (Command == AVR109_COMMAND_SelectDeviceType)) - { - FetchNextCommandByte(); - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if ((Command == AVR109_COMMAND_EnterProgrammingMode) || (Command == AVR109_COMMAND_LeaveProgrammingMode)) - { - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if (Command == AVR109_COMMAND_ReadPartCode) - { - /* Return ATMEGA128 part code - this is only to allow AVRProg to use the bootloader */ - WriteNextResponseByte(0x44); - WriteNextResponseByte(0x00); - } - else if (Command == AVR109_COMMAND_ReadAutoAddressIncrement) - { - /* Indicate auto-address increment is supported */ - WriteNextResponseByte('Y'); - } - else if (Command == AVR109_COMMAND_SetCurrentAddress) - { - /* Set the current address to that given by the host (translate 16-bit word address to byte address) */ - CurrAddress = (FetchNextCommandByte() << 9); - CurrAddress |= (FetchNextCommandByte() << 1); - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if (Command == AVR109_COMMAND_ReadBootloaderInterface) - { - /* Indicate serial programmer back to the host */ - WriteNextResponseByte('S'); - } - else if (Command == AVR109_COMMAND_ReadBootloaderIdentifier) - { - /* Write the 7-byte software identifier to the endpoint */ - for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++) - WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]); - } - else if (Command == AVR109_COMMAND_ReadBootloaderSWVersion) - { - WriteNextResponseByte('0' + BOOTLOADER_VERSION_MAJOR); - WriteNextResponseByte('0' + BOOTLOADER_VERSION_MINOR); - } - else if (Command == AVR109_COMMAND_ReadSignature) - { - WriteNextResponseByte(AVR_SIGNATURE_3); - WriteNextResponseByte(AVR_SIGNATURE_2); - WriteNextResponseByte(AVR_SIGNATURE_1); - } - else if (Command == AVR109_COMMAND_EraseFLASH) - { - /* Clear the application section of flash */ - for (uint32_t CurrFlashAddress = 0; CurrFlashAddress < (uint32_t)BOOT_START_ADDR; CurrFlashAddress += SPM_PAGESIZE) - { - boot_page_erase(CurrFlashAddress); - boot_spm_busy_wait(); - boot_page_write(CurrFlashAddress); - boot_spm_busy_wait(); - } - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - #if !defined(NO_LOCK_BYTE_WRITE_SUPPORT) - else if (Command == AVR109_COMMAND_WriteLockbits) - { - /* Set the lock bits to those given by the host */ - boot_lock_bits_set(FetchNextCommandByte()); - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - #endif - else if (Command == AVR109_COMMAND_ReadLockbits) - { - WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS)); - } - else if (Command == AVR109_COMMAND_ReadLowFuses) - { - WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS)); - } - else if (Command == AVR109_COMMAND_ReadHighFuses) - { - WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS)); - } - else if (Command == AVR109_COMMAND_ReadExtendedFuses) - { - WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS)); - } - #if !defined(NO_BLOCK_SUPPORT) - else if (Command == AVR109_COMMAND_GetBlockWriteSupport) - { - WriteNextResponseByte('Y'); - - /* Send block size to the host */ - WriteNextResponseByte(SPM_PAGESIZE >> 8); - WriteNextResponseByte(SPM_PAGESIZE & 0xFF); - } - else if ((Command == AVR109_COMMAND_BlockWrite) || (Command == AVR109_COMMAND_BlockRead)) - { - /* Delegate the block write/read to a separate function for clarity */ - ReadWriteMemoryBlock(Command); - } - #endif - #if !defined(NO_FLASH_BYTE_SUPPORT) - else if (Command == AVR109_COMMAND_FillFlashPageWordHigh) - { - /* Write the high byte to the current flash page */ - boot_page_fill(CurrAddress, FetchNextCommandByte()); - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if (Command == AVR109_COMMAND_FillFlashPageWordLow) - { - /* Write the low byte to the current flash page */ - boot_page_fill(CurrAddress | 0x01, FetchNextCommandByte()); - - /* Increment the address */ - CurrAddress += 2; - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if (Command == AVR109_COMMAND_WriteFlashPage) - { - /* Commit the flash page to memory */ - boot_page_write(CurrAddress); - - /* Wait until write operation has completed */ - boot_spm_busy_wait(); - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if (Command == AVR109_COMMAND_ReadFLASHWord) - { - #if (FLASHEND > 0xFFFF) - uint16_t ProgramWord = pgm_read_word_far(CurrAddress); - #else - uint16_t ProgramWord = pgm_read_word(CurrAddress); - #endif - - WriteNextResponseByte(ProgramWord >> 8); - WriteNextResponseByte(ProgramWord & 0xFF); - } - #endif - #if !defined(NO_EEPROM_BYTE_SUPPORT) - else if (Command == AVR109_COMMAND_WriteEEPROM) - { - /* Read the byte from the endpoint and write it to the EEPROM */ - eeprom_update_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte()); - - /* Increment the address after use */ - CurrAddress += 2; - - /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); - } - else if (Command == AVR109_COMMAND_ReadEEPROM) - { - /* Read the EEPROM byte and write it to the endpoint */ - WriteNextResponseByte(eeprom_read_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)))); - - /* Increment the address after use */ - CurrAddress += 2; - } - #endif - else if (Command != AVR109_COMMAND_Sync) - { - /* Unknown (non-sync) command, return fail code */ - WriteNextResponseByte('?'); - } - - /* Select the IN endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPADDR); - - /* Remember if the endpoint is completely full before clearing it */ - bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed()); - - /* Send the endpoint data to the host */ - Endpoint_ClearIN(); - - /* If a full endpoint's worth of data was sent, we need to send an empty packet afterwards to signal end of transfer */ - if (IsEndpointFull) - { - while (!(Endpoint_IsINReady())) - { - if (USB_DeviceState == DEVICE_STATE_Unattached) - return; - } - - Endpoint_ClearIN(); - } - - /* Wait until the data has been sent to the host */ - while (!(Endpoint_IsINReady())) - { - if (USB_DeviceState == DEVICE_STATE_Unattached) - return; - } - - /* Select the OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPADDR); - - /* Acknowledge the command from the host */ - Endpoint_ClearOUT(); -} - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h deleted file mode 100644 index 9b326abc3..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BootloaderCDC.c. - */ - -#ifndef _CDC_H_ -#define _CDC_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - #include - #include - - #include "Descriptors.h" - #include "BootloaderAPI.h" - #include "Config/AppConfig.h" - - #include - #include - #include - - /* Preprocessor Checks: */ - #if !defined(__OPTIMIZE_SIZE__) - #error This bootloader requires that it be optimized for size, not speed, to fit into the target device. Change optimization settings and try again. - #endif - - /* Macros: */ - /** Version major of the CDC bootloader. */ - #define BOOTLOADER_VERSION_MAJOR 0x01 - - /** Version minor of the CDC bootloader. */ - #define BOOTLOADER_VERSION_MINOR 0x00 - - /** Hardware version major of the CDC bootloader. */ - #define BOOTLOADER_HWVERSION_MAJOR 0x01 - - /** Hardware version minor of the CDC bootloader. */ - #define BOOTLOADER_HWVERSION_MINOR 0x00 - - /** Eight character bootloader firmware identifier reported to the host when requested. */ - #define SOFTWARE_IDENTIFIER "LUFACDC" - - /** Magic bootloader key to unlock forced application start mode. */ - #define MAGIC_BOOT_KEY 0xDC42 - - /* Enums: */ - /** Possible memory types that can be addressed via the bootloader. */ - enum AVR109_Memories - { - MEMORY_TYPE_FLASH = 'F', - MEMORY_TYPE_EEPROM = 'E', - }; - - /** Possible commands that can be issued to the bootloader. */ - enum AVR109_Commands - { - AVR109_COMMAND_Sync = 27, - AVR109_COMMAND_ReadEEPROM = 'd', - AVR109_COMMAND_WriteEEPROM = 'D', - AVR109_COMMAND_ReadFLASHWord = 'R', - AVR109_COMMAND_WriteFlashPage = 'm', - AVR109_COMMAND_FillFlashPageWordLow = 'c', - AVR109_COMMAND_FillFlashPageWordHigh = 'C', - AVR109_COMMAND_GetBlockWriteSupport = 'b', - AVR109_COMMAND_BlockWrite = 'B', - AVR109_COMMAND_BlockRead = 'g', - AVR109_COMMAND_ReadExtendedFuses = 'Q', - AVR109_COMMAND_ReadHighFuses = 'N', - AVR109_COMMAND_ReadLowFuses = 'F', - AVR109_COMMAND_ReadLockbits = 'r', - AVR109_COMMAND_WriteLockbits = 'l', - AVR109_COMMAND_EraseFLASH = 'e', - AVR109_COMMAND_ReadSignature = 's', - AVR109_COMMAND_ReadBootloaderSWVersion = 'V', - AVR109_COMMAND_ReadBootloaderHWVersion = 'v', - AVR109_COMMAND_ReadBootloaderIdentifier = 'S', - AVR109_COMMAND_ReadBootloaderInterface = 'p', - AVR109_COMMAND_SetCurrentAddress = 'A', - AVR109_COMMAND_ReadAutoAddressIncrement = 'a', - AVR109_COMMAND_ReadPartCode = 't', - AVR109_COMMAND_EnterProgrammingMode = 'P', - AVR109_COMMAND_LeaveProgrammingMode = 'L', - AVR109_COMMAND_SelectDeviceType = 'T', - AVR109_COMMAND_SetLED = 'x', - AVR109_COMMAND_ClearLED = 'y', - AVR109_COMMAND_ExitBootloader = 'E', - }; - - /* Type Defines: */ - /** Type define for a non-returning pointer to the start of the loaded application in flash memory. */ - typedef void (*AppPtr_t)(void) ATTR_NO_RETURN; - - /* Function Prototypes: */ - static void CDC_Task(void); - static void SetupHardware(void); - - void Application_Jump_Check(void) ATTR_INIT_SECTION(3); - - void EVENT_USB_Device_ConfigurationChanged(void); - - #if defined(INCLUDE_FROM_BOOTLOADERCDC_C) || defined(__DOXYGEN__) - #if !defined(NO_BLOCK_SUPPORT) - static void ReadWriteMemoryBlock(const uint8_t Command); - #endif - static uint8_t FetchNextCommandByte(void); - static void WriteNextResponseByte(const uint8_t Response); - #endif - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt deleted file mode 100644 index 55e5e55a4..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt +++ /dev/null @@ -1,240 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage CDC Class USB AVR Bootloader - * - * \section Sec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * \li Series 6 USB AVRs (AT90USBxxx6) - * \li Series 4 USB AVRs (ATMEGAxxU4) - * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Supported USB Speeds:Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109 - * protocol compatible programming software to load firmware onto the AVR. - * - * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit - * into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to - * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. - * - * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the - * bootloader from the normal user application. - * - * \warning THIS BOOTLOADER IS NOT SECURE. Malicious entities can recover written data, even if the device - * lockbits are set. - * - * \section Sec_Running Running the Bootloader - * - * This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device - * datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST - * fuse is cleared. - * - * For board specific exceptions to the above, see below. - * - * \subsection SSec_XPLAIN Atmel Xplain Board - * Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the - * \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. - * - * \subsection SSec_Leonardo Arduino Leonardo Board - * Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the - * \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. - * - * \section Sec_Installation Driver Installation - * - * After running this bootloader for the first time on a new computer, you will need to supply the .INF - * file located in this bootloader project's directory as the device's driver when running under Windows. - * This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the - * device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers. - * - * \section Sec_HostApp Host Controller Application - * - * This bootloader is compatible with the open source application AVRDUDE, Atmel's AVRPROG, or other - * applications implementing the AVR109 protocol, which is documented on the Atmel website as an application - * note. - * - * \subsection SSec_AVRDude AVRDUDE (Windows, Mac, Linux) - * - * AVRDude is a free, cross-platform and open source command line programmer for Atmel and third party AVR - * programmers. It is available on the the Windows platform as part of the "WinAVR" package, or on other systems - * either from a build from the official source code, or in many distributions as a precompiled binary package. - * - * To load a new HEX file with AVRDude, specify "AVR109" as the programmer, with the allocated COM port. On Windows - * platforms this will be a COMx port name: - * \code - * avrdude -c AVR109 -p at90usb1287 -P COM0 -U flash:w:Mouse.hex - * \endcode - * - * On Linux systems, this will typically be a /dev/ttyACMx port name: - * \code - * avrdude -c AVR109 -p at90usb1287 -P /dev/ttyACM0 -U flash:w:Mouse.hex - * \endcode - * - * Refer to the AVRDude project documentation for additional usage instructions. - * - * \section Sec_API User Application API - * - * Several user application functions for FLASH and other special memory area manipulations are exposed by the bootloader, - * allowing the user application to call into the bootloader at runtime to read and write FLASH data. - * - * By default, the bootloader API jump table is located 32 bytes from the end of the device's FLASH memory, and follows the - * following layout: - * - * \code - * #define BOOTLOADER_API_TABLE_SIZE 32 - * #define BOOTLOADER_API_TABLE_START ((FLASHEND + 1UL) - BOOTLOADER_API_TABLE_SIZE) - * #define BOOTLOADER_API_CALL(Index) (void*)((BOOTLOADER_API_TABLE_START + (Index * 2)) / 2) - * - * void (*BootloaderAPI_ErasePage)(uint32_t Address) = BOOTLOADER_API_CALL(0); - * void (*BootloaderAPI_WritePage)(uint32_t Address) = BOOTLOADER_API_CALL(1); - * void (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2); - * uint8_t (*BootloaderAPI_ReadSignature)(uint16_t Address) = BOOTLOADER_API_CALL(3); - * uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address) = BOOTLOADER_API_CALL(4); - * uint8_t (*BootloaderAPI_ReadLock)(void) = BOOTLOADER_API_CALL(5); - * void (*BootloaderAPI_WriteLock)(uint8_t LockBits) = BOOTLOADER_API_CALL(6); - * - * #define BOOTLOADER_MAGIC_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 2)) - * #define BOOTLOADER_MAGIC_SIGNATURE 0xDCFB - * - * #define BOOTLOADER_CLASS_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4)) - * #define BOOTLOADER_CDC_SIGNATURE 0xDF00 - * - * #define BOOTLOADER_ADDRESS_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8)) - * #define BOOTLOADER_ADDRESS_LENGTH 4 - * \endcode - * - * From the application the API support of the bootloader can be detected by reading the FLASH memory bytes located at address - * \c BOOTLOADER_MAGIC_SIGNATURE_START and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader - * can be determined by reading the FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them - * to the value \c BOOTLOADER_CDC_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes of FLASH - * memory starting from address \c BOOTLOADER_ADDRESS_START. - * - * \subsection SSec_API_MemLayout Device Memory Map - * The following illustration indicates the final memory map of the device when loaded with the bootloader. - * - * \verbatim - * +----------------------------+ 0x0000 - * | | - * | | - * | | - * | | - * | | - * | | - * | | - * | | - * | User Application | - * | | - * | | - * | | - * | | - * | | - * | | - * | | - * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE - * | | - * | Bootloader Application | - * | (Not User App. Accessible) | - * | | - * +----------------------------+ FLASHEND - 96 - * | API Table Trampolines | - * | (Not User App. Accessible) | - * +----------------------------+ FLASHEND - 32 - * | Bootloader API Table | - * | (User App. Accessible) | - * +----------------------------+ FLASHEND - 8 - * | Bootloader ID Constants | - * | (User App. Accessible) | - * +----------------------------+ FLASHEND - * \endverbatim - * - * \section Sec_KnownIssues Known Issues: - * - * \par On Linux machines, the CDC bootloader is unstable or inaccessible. - * A change to the \c ModemManager module in many Linux distributions causes - * this module to try to take control over inserted CDC devices, corrupting the - * datastream. A UDEV rule is required to prevent this. - * See here for resolution steps. - * If the issue still persists then uninstall modemmanager by executing sudo apt-get remove modemmanager, or - * the equivalent using your chosen distribution's package manager. - * - * \par On Linux machines, the CDC bootloader is inaccessible. - * On many Linux systems, non-root users do not have automatic access to newly - * inserted CDC devices. Root privileges or a UDEV rule is required to gain - * access. - * See here for resolution steps. - * - * \par After loading an application, it is not run automatically on startup. - * Some USB AVR boards ship with the BOOTRST fuse set, causing the bootloader - * to run automatically when the device is reset. In most cases, the BOOTRST - * fuse should be disabled and the HWBE fuse used instead to run the bootloader - * when needed. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
NO_BLOCK_SUPPORTAppConfig.hDefine to disable memory block read/write support in the bootloader, requiring all reads and writes to be made - * using the byte-level commands.
NO_EEPROM_BYTE_SUPPORTAppConfig.hDefine to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes - * to be made using the block-level commands.
NO_FLASH_BYTE_SUPPORTAppConfig.hDefine to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes - * to be made using the block-level commands.
NO_LOCK_BYTE_WRITE_SUPPORTAppConfig.hDefine to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.
- */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h deleted file mode 100644 index bbb5cb227..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Application Configuration Header File - * - * This is a header file which is be used to configure LUFA's - * compile time options, as an alternative to the compile time - * constants supplied through a makefile. - * - * For information on what each token does, refer to the - * \ref Sec_Options section of the application documentation. - */ - -#ifndef _APP_CONFIG_H_ -#define _APP_CONFIG_H_ - -// #define NO_BLOCK_SUPPORT -// #define NO_EEPROM_BYTE_SUPPORT -// #define NO_FLASH_BYTE_SUPPORT -// #define NO_LOCK_BYTE_WRITE_SUPPORT - -#endif diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h deleted file mode 100644 index af2dd3060..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Library Configuration Header File - * - * This header file is used to configure LUFA's compile time options, - * as an alternative to the compile time constants supplied through - * a makefile. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _LUFA_CONFIG_H_ -#define _LUFA_CONFIG_H_ - - #if (ARCH == ARCH_AVR8) - - /* Non-USB Related Configuration Tokens: */ -// #define DISABLE_TERMINAL_CODES - - /* USB Class Driver Related Tokens: */ -// #define HID_HOST_BOOT_PROTOCOL_ONLY -// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} -// #define HID_USAGE_STACK_DEPTH {Insert Value Here} -// #define HID_MAX_COLLECTIONS {Insert Value Here} -// #define HID_MAX_REPORTITEMS {Insert Value Here} -// #define HID_MAX_REPORT_IDS {Insert Value Here} -// #define NO_CLASS_DRIVER_AUTOFLUSH - - /* General USB Driver Related Tokens: */ - #define ORDERED_EP_CONFIG - #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) - #define USB_DEVICE_ONLY -// #define USB_HOST_ONLY -// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} -// #define NO_LIMITED_CONTROLLER_CONNECT - #define NO_SOF_EVENTS - - /* USB Device Mode Driver Related Tokens: */ - #define USE_RAM_DESCRIPTORS -// #define USE_FLASH_DESCRIPTORS -// #define USE_EEPROM_DESCRIPTORS - #define NO_INTERNAL_SERIAL - #define FIXED_CONTROL_ENDPOINT_SIZE 8 - #define DEVICE_STATE_AS_GPIOR 0 - #define FIXED_NUM_CONFIGURATIONS 1 -// #define CONTROL_ONLY_DEVICE -// #define INTERRUPT_CONTROL_ENDPOINT - #define NO_DEVICE_REMOTE_WAKEUP - #define NO_DEVICE_SELF_POWER - - /* USB Host Mode Driver Related Tokens: */ -// #define HOST_STATE_AS_GPIOR {Insert Value Here} -// #define USB_HOST_TIMEOUT_MS {Insert Value Here} -// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} -// #define NO_AUTO_VBUS_MANAGEMENT -// #define INVERTED_VBUS_ENABLE_LINE - - #else - - #error Unsupported architecture for this LUFA configuration file. - - #endif -#endif diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c deleted file mode 100644 index 2ff6b503b..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. - */ - -#include "Descriptors.h" - -/** Device descriptor structure. This descriptor, located in SRAM memory, describes the overall - * device characteristics, including the supported USB version, control endpoint size and the - * number of device configurations. The descriptor is read out by the USB host when the enumeration - * process begins. - */ -const USB_Descriptor_Device_t DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(1,1,0), - .Class = CDC_CSCP_CDCClass, - .SubClass = CDC_CSCP_NoSpecificSubclass, - .Protocol = CDC_CSCP_NoSpecificProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - .VendorID = 0x03EB, - .ProductID = 0x204A, - .ReleaseNumber = VERSION_BCD(1,0,0), - - .ManufacturerStrIndex = STRING_ID_Manufacturer, - .ProductStrIndex = STRING_ID_Product, - .SerialNumStrIndex = NO_DESCRIPTOR, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/** Configuration descriptor structure. This descriptor, located in SRAM memory, describes the usage - * of the device in one of its supported configurations, including information about any device interfaces - * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting - * a configuration so that the host may correctly communicate with the USB device. - */ -const USB_Descriptor_Configuration_t ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = 2, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - .CDC_CCI_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = INTERFACE_ID_CDC_CCI, - .AlternateSetting = 0, - - .TotalEndpoints = 1, - - .Class = CDC_CSCP_CDCClass, - .SubClass = CDC_CSCP_ACMSubclass, - .Protocol = CDC_CSCP_ATCommandProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .CDC_Functional_Header = - { - .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, - .Subtype = 0x00, - - .CDCSpecification = VERSION_BCD(1,1,0), - }, - - .CDC_Functional_ACM = - { - .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, - .Subtype = 0x02, - - .Capabilities = 0x02, - }, - - .CDC_Functional_Union = - { - .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, - .Subtype = 0x06, - - .MasterInterfaceNumber = INTERFACE_ID_CDC_CCI, - .SlaveInterfaceNumber = INTERFACE_ID_CDC_DCI, - }, - - .CDC_NotificationEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = CDC_NOTIFICATION_EPADDR, - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CDC_NOTIFICATION_EPSIZE, - .PollingIntervalMS = 0xFF - }, - - .CDC_DCI_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = INTERFACE_ID_CDC_DCI, - .AlternateSetting = 0, - - .TotalEndpoints = 2, - - .Class = CDC_CSCP_CDCDataClass, - .SubClass = CDC_CSCP_NoDataSubclass, - .Protocol = CDC_CSCP_NoDataProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .CDC_DataOutEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = CDC_RX_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x05 - }, - - .CDC_DataInEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = CDC_TX_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x05 - } -}; - -/** Language descriptor structure. This descriptor, located in SRAM memory, is returned when the host requests - * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate - * via the language ID table available at USB.org what languages the device supports for its string descriptors. - */ -const USB_Descriptor_String_t LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); - -/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable - * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); - -/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, - * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC"); - -/** This function is called by the library when in device mode, and must be overridden (see LUFA library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorNumber = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - if (DescriptorNumber == STRING_ID_Language) - { - Address = &LanguageString; - Size = LanguageString.Header.Size; - } - else if (DescriptorNumber == STRING_ID_Manufacturer) - { - Address = &ManufacturerString; - Size = ManufacturerString.Header.Size; - } - else if (DescriptorNumber == STRING_ID_Product) - { - Address = &ProductString; - Size = ProductString.Header.Size; - } - - break; - } - - *DescriptorAddress = Address; - return Size; -} - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h deleted file mode 100644 index ef0437917..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Descriptors.c. - */ - -#ifndef _DESCRIPTORS_H_ -#define _DESCRIPTORS_H_ - - /* Includes: */ - #include - - #include "Config/AppConfig.h" - - /* Macros: */ - #if defined(__AVR_AT90USB1287__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x97 - #define AVR_SIGNATURE_3 0x82 - #elif defined(__AVR_AT90USB647__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x96 - #define AVR_SIGNATURE_3 0x82 - #elif defined(__AVR_AT90USB1286__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x97 - #define AVR_SIGNATURE_3 0x82 - #elif defined(__AVR_AT90USB646__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x96 - #define AVR_SIGNATURE_3 0x82 - #elif defined(__AVR_ATmega32U4__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x95 - #define AVR_SIGNATURE_3 0x87 - #elif defined(__AVR_ATmega16U4__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x94 - #define AVR_SIGNATURE_3 0x88 - #elif defined(__AVR_ATmega32U2__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x95 - #define AVR_SIGNATURE_3 0x8A - #elif defined(__AVR_ATmega16U2__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x94 - #define AVR_SIGNATURE_3 0x89 - #elif defined(__AVR_AT90USB162__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x94 - #define AVR_SIGNATURE_3 0x82 - #elif defined(__AVR_ATmega8U2__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x93 - #define AVR_SIGNATURE_3 0x89 - #elif defined(__AVR_AT90USB82__) - #define AVR_SIGNATURE_1 0x1E - #define AVR_SIGNATURE_2 0x94 - #define AVR_SIGNATURE_3 0x82 - #else - #error The selected AVR part is not currently supported by this bootloader. - #endif - - /** Endpoint address for the CDC control interface event notification endpoint. */ - #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - - /** Endpoint address for the CDC data interface TX (data IN) endpoint. */ - #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - - /** Endpoint address for the CDC data interface RX (data OUT) endpoint. */ - #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) - - /** Size of the CDC data interface TX and RX data endpoint banks, in bytes. */ - #define CDC_TXRX_EPSIZE 16 - - /** Size of the CDC control interface notification endpoint bank, in bytes. */ - #define CDC_NOTIFICATION_EPSIZE 8 - - /* Type Defines: */ - /** Type define for the device configuration descriptor structure. This must be defined in the - * application code, as the configuration descriptor contains several sub-descriptors which - * vary between devices, and which describe the device's usage to the host. - */ - typedef struct - { - USB_Descriptor_Configuration_Header_t Config; - - // CDC Control Interface - USB_Descriptor_Interface_t CDC_CCI_Interface; - USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header; - USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM; - USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union; - USB_Descriptor_Endpoint_t CDC_NotificationEndpoint; - - // CDC Data Interface - USB_Descriptor_Interface_t CDC_DCI_Interface; - USB_Descriptor_Endpoint_t CDC_DataOutEndpoint; - USB_Descriptor_Endpoint_t CDC_DataInEndpoint; - } USB_Descriptor_Configuration_t; - - /** Enum for the device interface descriptor IDs within the device. Each interface descriptor - * should have a unique ID index associated with it, which can be used to refer to the - * interface from other descriptors. - */ - enum InterfaceDescriptors_t - { - INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */ - INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */ - }; - - /** Enum for the device string descriptor IDs within the device. Each string descriptor should - * have a unique ID index associated with it, which can be used to refer to the string from - * other descriptors. - */ - enum StringDescriptors_t - { - STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ - STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ - STRING_ID_Product = 2, /**< Product string ID */ - }; - - /* Function Prototypes: */ - uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf deleted file mode 100644 index 61624c731..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf +++ /dev/null @@ -1,66 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation -;************************************************************ - -[DefaultInstall] -CopyINF="LUFA CDC Bootloader.inf" - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -DriverVer=7/1/2012,10.0.0.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64 - -[SourceDisksNames] - -[SourceDisksFiles] - -[DestinationDirs] -DefaultDestDir=12 - -[DriverInstall] -Include=mdmcpq.inf -CopyFiles=FakeModemCopyFileSection -AddReg=DriverInstall.AddReg - -[DriverInstall.Services] -Include=mdmcpq.inf -AddService=usbser, 0x00000002, LowerFilter_Service_Inst - -[DriverInstall.AddReg] -HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider" - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A - -[DeviceList.NTx86] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A - -[DeviceList.NTia64] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGNAME="http://www.lufa-lib.org" -DESCRIPTION="LUFA CDC Class Bootloader" diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml deleted file mode 100644 index 02e7063c6..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml +++ /dev/null @@ -1,161 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile deleted file mode 100644 index 2dfb2a08a..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile +++ /dev/null @@ -1,2365 +0,0 @@ -# Doxyfile 1.8.8 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = "LUFA Library - CDC Class Bootloader" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify an logo or icon that is included in -# the documentation. The maximum height of the logo should not exceed 55 pixels -# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo -# to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = ./Documentation/ - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = YES - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a -# new page for each member. If set to NO, the documentation of a member will be -# part of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given -# extension. Doxygen has a built-in mapping, but you can override or extend it -# using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. -# -# Note For files without extension you can use no_extension as a placeholder. -# -# Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = NO - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by by putting a % sign in front of the word -# or globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES to allow class member groups of the same type -# (for instance a group of public functions) to be put as a subgroup of that -# type (e.g. under the Public Functions section). Set it to NO to prevent -# subgrouping. Alternatively, this can be done per class using the -# \nosubgrouping command. -# The default value is: YES. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions -# are shown inside the group in which they are included (e.g. using \ingroup) -# instead of on a separate page (for HTML and Man pages) or section (for LaTeX -# and RTF). -# -# Note that this feature does not work in combination with -# SEPARATE_MEMBER_PAGES. -# The default value is: NO. - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions -# with only public data fields or simple typedef fields will be shown inline in -# the documentation of the scope in which they are defined (i.e. file, -# namespace, or group documentation), provided this scope is documented. If set -# to NO, structs, classes, and unions are shown on a separate page (for HTML and -# Man pages) or section (for LaTeX and RTF). -# The default value is: NO. - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or -# enum is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically be -# useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. -# The default value is: NO. - -TYPEDEF_HIDES_STRUCT = NO - -# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This -# cache is used to resolve symbols given their name and scope. Since this can be -# an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The -# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range -# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest -# the optimal cache size from a speed point of view. -# Minimum value: 0, maximum value: 9, default value: 0. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. Private -# class members and static file members will be hidden unless the -# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. -# Note: This will also disable the warnings about undocumented members that are -# normally produced when WARNINGS is set to YES. -# The default value is: NO. - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will -# be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIVATE = YES - -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal -# scope will be included in the documentation. -# The default value is: NO. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file will be -# included in the documentation. -# The default value is: NO. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO -# only classes defined in header files are included. Does not have any effect -# for Java sources. -# The default value is: YES. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local methods, -# which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO only methods in the interface are -# included. -# The default value is: NO. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base name of -# the file that contains the anonymous namespace. By default anonymous namespace -# are hidden. -# The default value is: NO. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all -# undocumented members inside documented classes or files. If set to NO these -# members will be included in the various overviews, but no documentation -# section is generated. This option has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. If set -# to NO these classes will be included in the various overviews. This option has -# no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO these declarations will be -# included in the documentation. -# The default value is: NO. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO these -# blocks will be appended to the function's detailed documentation block. -# The default value is: NO. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation that is typed after a -# \internal command is included. If the tag is set to NO then the documentation -# will be excluded. Set it to YES to include the internal documentation. -# The default value is: NO. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. -# The default value is: system dependent. - -CASE_SENSE_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES the -# scope will be hidden. -# The default value is: NO. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of -# the files that are included by a file in the documentation of that file. -# The default value is: YES. - -SHOW_INCLUDE_FILES = YES - -# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each -# grouped member an include statement to the documentation, telling the reader -# which file to include in order to use the member. -# The default value is: NO. - -SHOW_GROUPED_MEMB_INC = NO - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include -# files with double quotes in the documentation rather than with sharp brackets. -# The default value is: NO. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the -# documentation for inline members. -# The default value is: YES. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the -# (detailed) documentation of file and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. -# The default value is: YES. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief -# descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. Note that -# this will also influence the order of the classes in the class list. -# The default value is: NO. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the -# (brief and detailed) documentation of class members so that constructors and -# destructors are listed first. If set to NO the constructors will appear in the -# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. -# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief -# member documentation. -# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting -# detailed member documentation. -# The default value is: NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy -# of group names into alphabetical order. If set to NO the group names will -# appear in their defined order. -# The default value is: NO. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by -# fully-qualified names, including namespaces. If set to NO, the class list will -# be sorted only by class name, not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the alphabetical -# list. -# The default value is: NO. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper -# type resolution of all parameters of a function it will reject a match between -# the prototype and the implementation of a member function even if there is -# only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still -# accept a match between prototype and implementation in such cases. -# The default value is: NO. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the -# todo list. This list is created by putting \todo commands in the -# documentation. -# The default value is: YES. - -GENERATE_TODOLIST = NO - -# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the -# test list. This list is created by putting \test commands in the -# documentation. -# The default value is: YES. - -GENERATE_TESTLIST = NO - -# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug -# list. This list is created by putting \bug commands in the documentation. -# The default value is: YES. - -GENERATE_BUGLIST = NO - -# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) -# the deprecated list. This list is created by putting \deprecated commands in -# the documentation. -# The default value is: YES. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional documentation -# sections, marked by \if ... \endif and \cond -# ... \endcond blocks. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the -# initial value of a variable or macro / define can have for it to appear in the -# documentation. If the initializer consists of more lines than specified here -# it will be hidden. Use a value of 0 to hide initializers completely. The -# appearance of the value of individual variables and macros / defines can be -# controlled using \showinitializer or \hideinitializer command in the -# documentation regardless of this setting. -# Minimum value: 0, maximum value: 10000, default value: 30. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES the list -# will mention the files that were used to generate the documentation. -# The default value is: YES. - -SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This -# will remove the Files entry from the Quick Index and from the Folder Tree View -# (if specified). -# The default value is: YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces -# page. This will remove the Namespaces entry from the Quick Index and from the -# Folder Tree View (if specified). -# The default value is: YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command command input-file, where command is the value of the -# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file -# version. For an example see the documentation. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can -# optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. -# -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE -# tag is left empty. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files containing -# the reference definitions. This must be a list of .bib files. The .bib -# extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. -# For LaTeX the style of the bibliography can be controlled using -# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. See also \cite for info how to create references. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# Configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the -# messages are off. -# The default value is: NO. - -QUIET = YES - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES -# this implies that the warnings are on. -# -# Tip: Turn warnings on while writing the documentation. -# The default value is: YES. - -WARNINGS = YES - -# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate -# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: YES. - -WARN_IF_UNDOCUMENTED = YES - -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. -# The default value is: YES. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that -# are documented, but have no documentation for their parameters or return -# value. If set to NO doxygen will only warn about wrong or incomplete parameter -# documentation, but not about the absence of documentation. -# The default value is: NO. - -WARN_NO_PARAMDOC = YES - -# The WARN_FORMAT tag determines the format of the warning messages that doxygen -# can produce. The string should contain the $file, $line, and $text tags, which -# will be replaced by the file and line number from which the warning originated -# and the warning text. Optionally the format may contain $version, which will -# be replaced by the version of the file (if it could be obtained via -# FILE_VERSION_FILTER) -# The default value is: $file:$line: $text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning and error -# messages should be written. If left blank the output is written to standard -# error (stderr). - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# Configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag is used to specify the files and/or directories that contain -# documented source files. You may enter file names like myfile.cpp or -# directories like /usr/src/myproject. Separate the files or directories with -# spaces. -# Note: If this tag is empty the current directory is searched. - -INPUT = ./ - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses -# libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. -# The default value is: UTF-8. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. - -FILE_PATTERNS = *.h \ - *.c \ - *.txt - -# The RECURSIVE tag can be used to specify whether or not subdirectories should -# be searched for input files as well. -# The default value is: NO. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# -# Note that relative paths are relative to the directory from which doxygen is -# run. - -EXCLUDE = Documentation/ - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. -# The default value is: NO. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* - -EXCLUDE_SYMBOLS = __* \ - INCLUDE_FROM_* - -# The EXAMPLE_PATH tag can be used to specify one or more files or directories -# that contain example code fragments that are included (see the \include -# command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank all -# files are included. - -EXAMPLE_PATTERNS = * - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude commands -# irrespective of the value of the RECURSIVE tag. -# The default value is: NO. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or directories -# that contain images that are to be included in the documentation (see the -# \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command: -# -# -# -# where is the value of the INPUT_FILTER tag, and is the -# name of an input file. Doxygen will then use the output that the filter -# program writes to standard output. If FILTER_PATTERNS is specified, this tag -# will be ignored. -# -# Note that the filter must not add or remove lines; it is applied before the -# code is scanned, but not when the output code is generated. If lines are added -# or removed, the anchors will not be placed correctly. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: pattern=filter -# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how -# filters are used. If the FILTER_PATTERNS tag is empty or if none of the -# patterns match the file name, INPUT_FILTER is applied. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER ) will also be used to filter the input files that are used for -# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). -# The default value is: NO. - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and -# it is also possible to disable source filtering for a specific pattern using -# *.ext= (so without naming a filter). -# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. - -FILTER_SOURCE_PATTERNS = - -# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page -# (index.html). This can be useful if you have a project on for instance GitHub -# and want to reuse the introduction page also for the doxygen output. - -USE_MDFILE_AS_MAINPAGE = - -#--------------------------------------------------------------------------- -# Configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will be -# generated. Documented entities will be cross-referenced with these sources. -# -# Note: To get rid of all source code in the generated output, make sure that -# also VERBATIM_HEADERS is set to NO. -# The default value is: NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. -# The default value is: NO. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any -# special comment blocks from generated source code fragments. Normal C, C++ and -# Fortran comments will always remain visible. -# The default value is: YES. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. -# The default value is: NO. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES then for each documented function -# all documented entities called/used by that function will be listed. -# The default value is: NO. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES, then the hyperlinks from functions in REFERENCES_RELATION and -# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will -# link to the documentation. -# The default value is: YES. - -REFERENCES_LINK_SOURCE = NO - -# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the -# source code will show a tooltip with additional information such as prototype, -# brief description and links to the definition and documentation. Since this -# will make the HTML file larger and loading of large files a bit slower, you -# can opt to disable this feature. -# The default value is: YES. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -SOURCE_TOOLTIPS = YES - -# If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in -# source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version -# 4.8.6 or higher. -# -# To use it do the following: -# - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file -# - Make sure the INPUT points to the root of the source tree -# - Run doxygen as normal -# -# Doxygen will invoke htags (and that will in turn invoke gtags), so these -# tools must be available from the command line (i.e. in the search path). -# -# The result: instead of the source browser generated by doxygen, the links to -# source code will now point to the output of htags. -# The default value is: NO. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a -# verbatim copy of the header file for each class for which an include is -# specified. Set to NO to disable this. -# See also: Section \class. -# The default value is: YES. - -VERBATIM_HEADERS = NO - -# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. -# Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. -# The default value is: NO. - -CLANG_ASSISTED_PARSING = NO - -# If clang assisted parsing is enabled you can provide the compiler with command -# line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories -# specified with INPUT and INCLUDE_PATH. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_OPTIONS = - -#--------------------------------------------------------------------------- -# Configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all -# compounds will be generated. Enable this if the project contains a lot of -# classes, structs, unions or interfaces. -# The default value is: YES. - -ALPHABETICAL_INDEX = YES - -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output -# The default value is: YES. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each -# generated HTML page (for example: .htm, .php, .asp). -# The default value is: .html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a -# standard header. -# -# To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. -# the setting GENERATE_TREEVIEW). It is highly recommended to start with a -# default header using -# doxygen -w html new_header.html new_footer.html new_stylesheet.css -# YourConfigFile -# and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally -# uses. -# Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description -# of the possible markers and block names see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard -# footer. See HTML_HEADER for more information on how to generate a default -# footer and what special commands can be used inside the footer. See also -# section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style -# sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. -# See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. -# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as -# it is more robust and this tag (HTML_STYLESHEET) will in the future become -# obsolete. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_STYLESHEET = - -# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. -# This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefor more robust against future updates. -# Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra stylesheet files is of importance (e.g. the last -# stylesheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_STYLESHEET = - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that the -# files will be copied as-is; there are no commands or markers available. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the stylesheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value -# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 -# purple, and 360 is red again. -# Minimum value: 0, maximum value: 359, default value: 220. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A -# value of 255 will produce the most vivid colors. -# Minimum value: 0, maximum value: 255, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the -# luminance component of the colors in the HTML output. Values below 100 -# gradually make the output lighter, whereas values above 100 make the output -# darker. The value divided by 100 is the actual gamma applied, so 80 represents -# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not -# change the gamma. -# Minimum value: 40, maximum value: 240, default value: 80. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = NO - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_DYNAMIC_SECTIONS = YES - -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries -# shown in the various tree structured indices initially; the user can expand -# and collapse entries dynamically later on. Doxygen will expand the tree to -# such a level that at most the specified number of entries are visible (unless -# a fully collapsed tree already exceeds this amount). So setting the number of -# entries 1 will produce a full collapsed tree by default. 0 is a special value -# representing an infinite number of entries and will result in a full expanded -# tree by default. -# Minimum value: 0, maximum value: 9999, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files will be -# generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_DOCSET = NO - -# This tag determines the name of the docset feed. A documentation feed provides -# an umbrella under which multiple documentation sets from a single provider -# (such as a company or product suite) can be grouped. -# The default value is: Doxygen generated docs. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# This tag specifies a string that should uniquely identify the documentation -# set bundle. This should be a reverse domain-name style string, e.g. -# com.mycompany.MyDocSet. Doxygen will append .docset to the name. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. -# The default value is: org.doxygen.Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. -# The default value is: Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three -# additional HTML index files: index.hhp, index.hhc, and index.hhk. The -# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. -# -# The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML -# files are now used as the Windows 98 help format, and will replace the old -# Windows help format (.hlp) on all Windows platforms in the future. Compressed -# HTML files also contain an index, a table of contents, and you can search for -# words in the documentation. The HTML workshop also contains a viewer for -# compressed HTML files. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_HTMLHELP = NO - -# The CHM_FILE tag can be used to specify the file name of the resulting .chm -# file. You can add a path in front of the file if the result should not be -# written to the html output directory. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_FILE = - -# The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler ( hhc.exe). If non-empty -# doxygen will try to run the HTML help compiler on the generated index.hhp. -# The file has to be specified with full path. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -HHC_LOCATION = - -# The GENERATE_CHI flag controls if a separate .chi index file is generated ( -# YES) or that it should be included in the master .chm file ( NO). -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -GENERATE_CHI = NO - -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) -# and project file content. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_INDEX_ENCODING = - -# The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it -# enables the Previous and Next buttons. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members to -# the table of contents of the HTML help documentation and to the tree view. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -TOC_EXPAND = YES - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that -# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help -# (.qch) of the generated HTML documentation. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify -# the file name of the resulting .qch file. The path specified is relative to -# the HTML output folder. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help -# Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt -# Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). -# The default value is: doc. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_VIRTUAL_FOLDER = doc - -# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom -# filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_SECT_FILTER_ATTRS = - -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be -# generated, together with the HTML files, they form an Eclipse help plugin. To -# install this plugin and make it available under the help contents menu in -# Eclipse, the contents of the directory containing the HTML and XML files needs -# to be copied into the plugins directory of eclipse. The name of the directory -# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. -# After copying Eclipse needs to be restarted before the help appears. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the Eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have this -# name. Each documentation set should have its own identifier. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# If you want full control over the layout of the generated HTML pages it might -# be necessary to disable the index and replace it with your own. The -# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top -# of each HTML page. A value of NO enables the index and the value YES disables -# it. Since the tabs in the index contain the same information as the navigation -# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -DISABLE_INDEX = YES - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. If the tag -# value is set to YES, a side panel will be generated containing a tree-like -# index structure (just like the one that is generated for HTML Help). For this -# to work a browser that supports JavaScript, DHTML, CSS and frames is required -# (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_TREEVIEW = YES - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. -# -# Note that a value of 0 will completely suppress the enum values from appearing -# in the overview section. -# Minimum value: 0, maximum value: 20, default value: 4. -# This tag requires that the tag GENERATE_HTML is set to YES. - -ENUM_VALUES_PER_LINE = 1 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used -# to set the initial width (in pixels) of the frame in which the tree is shown. -# Minimum value: 0, maximum value: 1500, default value: 250. -# This tag requires that the tag GENERATE_HTML is set to YES. - -TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to -# external symbols imported via tag files in a separate window. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of LaTeX formulas included as images in -# the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML -# output directory to force them to be regenerated. -# Minimum value: 8, maximum value: 50, default value: 10. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using prerendered bitmaps. Use this if you do not have LaTeX -# installed or if you want to formulas look prettier in the HTML output. When -# enabled you may also need to install MathJax separately and configure the path -# to it using the MATHJAX_RELPATH option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -USE_MATHJAX = NO - -# When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. -# Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. -# The default value is: HTML-CSS. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_FORMAT = HTML-CSS - -# When MathJax is enabled you need to specify the location relative to the HTML -# output directory using the MATHJAX_RELPATH option. The destination directory -# should contain the MathJax.js script. For instance, if the mathjax directory -# is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax -# Content Delivery Network so you can quickly see the result without installing -# MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax -# extension names that should be enabled during MathJax rendering. For example -# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_EXTENSIONS = - -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces -# of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an -# example see the documentation. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_CODEFILE = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and -# should work on any modern browser. Note that when using HTML help -# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) -# there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then -# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to -# search using the keyboard; to jump to the search box use + S -# (what the is depends on the OS and browser, but it is typically -# , /