[Keyboard] Update Felix keyboard (#6306)
This commit is contained in:
fauxpark
Drashna Jaelre
parent
ecf0612cc8
commit
2bbbfc6154
@ -1,5 +1,4 @@
|
|||||||
#ifndef CONFIG_H
|
#pragma once
|
||||||
#define CONFIG_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
#include "config_common.h"
|
||||||
|
|
||||||
@ -9,40 +8,225 @@
|
|||||||
#define DEVICE_VER 0x0001
|
#define DEVICE_VER 0x0001
|
||||||
#define MANUFACTURER Unikeyboard
|
#define MANUFACTURER Unikeyboard
|
||||||
#define PRODUCT Felix
|
#define PRODUCT Felix
|
||||||
#define DESCRIPTION 4x5 number/macropad.
|
#define DESCRIPTION 4x5 number/macropad
|
||||||
|
|
||||||
/* key matrix size */
|
/* key matrix size */
|
||||||
#define MATRIX_ROWS 5
|
#define MATRIX_ROWS 5
|
||||||
#define MATRIX_COLS 4
|
#define MATRIX_COLS 4
|
||||||
|
|
||||||
/* key matrix pins */
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
#define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }
|
#define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }
|
||||||
#define MATRIX_COL_PINS { B5, B4, E6, D7 }
|
#define MATRIX_COL_PINS { B5, B4, E6, D7 }
|
||||||
#define UNUSED_PINS
|
#define UNUSED_PINS
|
||||||
|
|
||||||
/* COL2ROW or ROW2COL */
|
/* COL2ROW, ROW2COL */
|
||||||
#define DIODE_DIRECTION ROW2COL
|
#define DIODE_DIRECTION ROW2COL
|
||||||
|
|
||||||
/* number of backlight levels */
|
/*
|
||||||
/* Not sure what pin controls the backlighting, need help for this. */
|
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||||
#define BACKLIGHT_PIN
|
*/
|
||||||
#define BACKLIGHT_LEVELS 5
|
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||||
|
|
||||||
/* Set 0 if debouncing isn't needed */
|
#define BACKLIGHT_PIN C6
|
||||||
|
#define BACKLIGHT_LEVELS 5
|
||||||
|
//#define BACKLIGHT_BREATHING
|
||||||
|
|
||||||
|
// #define RGB_DI_PIN E2
|
||||||
|
// #ifdef RGB_DI_PIN
|
||||||
|
// #define RGBLED_NUM 16
|
||||||
|
// #define RGBLIGHT_HUE_STEP 8
|
||||||
|
// #define RGBLIGHT_SAT_STEP 8
|
||||||
|
// #define RGBLIGHT_VAL_STEP 8
|
||||||
|
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||||
|
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||||
|
// /*== all animations enable ==*/
|
||||||
|
// #define RGBLIGHT_ANIMATIONS
|
||||||
|
// /*== or choose animations ==*/
|
||||||
|
// #define RGBLIGHT_EFFECT_BREATHING
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||||
|
// #define RGBLIGHT_EFFECT_SNAKE
|
||||||
|
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||||
|
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||||
|
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||||
|
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||||
|
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||||
|
// /*== customize breathing effect ==*/
|
||||||
|
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||||
|
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||||
|
// /*==== use exp() and sin() ====*/
|
||||||
|
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||||
|
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||||
|
// #endif
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
#define DEBOUNCE 5
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
#define LOCKING_SUPPORT_ENABLE
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
|
||||||
/* Locking resynchronize hack */
|
/* Locking resynchronize hack */
|
||||||
#define LOCKING_RESYNC_ENABLE
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
/* there is no rgb underglow by default. */
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
#define RGB_DI_PIN
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
#define RGBLIGHT_ANIMATIONS
|
*/
|
||||||
#define RGBLED_NUM 16
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
#define RGBLIGHT_HUE_STEP 8
|
|
||||||
#define RGBLIGHT_SAT_STEP 8
|
|
||||||
#define RGBLIGHT_VAL_STEP 8
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
/* defined by default; to change, uncomment and set to the combination you want */
|
||||||
|
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP H
|
||||||
|
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER B
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
#endif
|
#endif
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Bootmagic Lite key configuration */
|
||||||
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
|||||||
@ -1,5 +1,4 @@
|
|||||||
#ifndef FELIX_H
|
#pragma once
|
||||||
#define FELIX_H
|
|
||||||
|
|
||||||
#include "quantum.h"
|
#include "quantum.h"
|
||||||
|
|
||||||
@ -18,5 +17,3 @@
|
|||||||
}
|
}
|
||||||
|
|
||||||
#define LAYOUT LAYOUT_ortho_5x4
|
#define LAYOUT LAYOUT_ortho_5x4
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -6,7 +6,28 @@
|
|||||||
"height": 5,
|
"height": 5,
|
||||||
"layouts": {
|
"layouts": {
|
||||||
"LAYOUT_ortho_5x4": {
|
"LAYOUT_ortho_5x4": {
|
||||||
"layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K100", "x":0, "y":1}, {"label":"K101", "x":1, "y":1}, {"label":"K102", "x":2, "y":1}, {"label":"K103", "x":3, "y":1}, {"label":"K200", "x":0, "y":2}, {"label":"K201", "x":1, "y":2}, {"label":"K202", "x":2, "y":2}, {"label":"K203", "x":3, "y":2}, {"label":"K300", "x":0, "y":3}, {"label":"K301", "x":1, "y":3}, {"label":"K302", "x":2, "y":3}, {"label":"K303", "x":3, "y":3}, {"label":"K400", "x":0, "y":4}, {"label":"K401", "x":1, "y":4}, {"label":"K402", "x":2, "y":4}, {"label":"K403", "x":3, "y":4}]
|
"layout": [
|
||||||
|
{"label":"K000", "x":0, "y":0},
|
||||||
|
{"label":"K001", "x":1, "y":0},
|
||||||
|
{"label":"K002", "x":2, "y":0},
|
||||||
|
{"label":"K003", "x":3, "y":0},
|
||||||
|
{"label":"K100", "x":0, "y":1},
|
||||||
|
{"label":"K101", "x":1, "y":1},
|
||||||
|
{"label":"K102", "x":2, "y":1},
|
||||||
|
{"label":"K103", "x":3, "y":1},
|
||||||
|
{"label":"K200", "x":0, "y":2},
|
||||||
|
{"label":"K201", "x":1, "y":2},
|
||||||
|
{"label":"K202", "x":2, "y":2},
|
||||||
|
{"label":"K203", "x":3, "y":2},
|
||||||
|
{"label":"K300", "x":0, "y":3},
|
||||||
|
{"label":"K301", "x":1, "y":3},
|
||||||
|
{"label":"K302", "x":2, "y":3},
|
||||||
|
{"label":"K303", "x":3, "y":3},
|
||||||
|
{"label":"K400", "x":0, "y":4},
|
||||||
|
{"label":"K401", "x":1, "y":4},
|
||||||
|
{"label":"K402", "x":2, "y":4},
|
||||||
|
{"label":"K403", "x":3, "y":4}
|
||||||
|
]
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|||||||
@ -1,22 +1,11 @@
|
|||||||
#include QMK_KEYBOARD_H
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
LAYOUT_ortho_5x4(
|
||||||
LAYOUT(
|
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||||
KC_P7, KC_P8, KC_P9, KC_PPLS,
|
KC_P4, KC_P5, KC_P6, KC_HOME,
|
||||||
KC_P4, KC_P5, KC_P6, KC_HOME,
|
KC_P1, KC_P2, KC_P3, KC_END,
|
||||||
KC_P1, KC_P2, KC_P3, KC_END,
|
KC_P0, KC_PEQL, KC_PDOT, KC_PENT
|
||||||
KC_P0, KC_PEQL, KC_PDOT, KC_PENT
|
)
|
||||||
),
|
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
void persistant_default_layer_set(uint16_t default_layer) {
|
|
||||||
}
|
|
||||||
|
|
||||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
|
||||||
switch (keycode) {
|
|
||||||
}
|
|
||||||
return true;
|
|
||||||
}
|
|
||||||
|
|||||||
@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment):
|
|||||||
|
|
||||||
make felix:default
|
make felix:default
|
||||||
|
|
||||||
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|||||||
@ -37,22 +37,34 @@ F_USB = $(F_CPU)
|
|||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
# Bootloader selection
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = caterina
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
AUDIO_ENABLE = no
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
RGBLIGHT_ENABLE = no
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
|
||||||
LAYOUTS = ortho_5x4
|
LAYOUTS = ortho_5x4
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user