diff --git a/docs/isp_flashing_guide.md b/docs/isp_flashing_guide.md
index 18f214784..0f786c514 100644
--- a/docs/isp_flashing_guide.md
+++ b/docs/isp_flashing_guide.md
@@ -63,6 +63,7 @@ If you just want to get things back to normal, you can flash only a bootloader f
 
 * [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
 * [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
+* [`atmega32a`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32a_1_0_0.hex) - jj40
 
 If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
 
@@ -113,6 +114,10 @@ Since our keyboard uses an `atmega32u4` (common), that is the chip we'll specify
 
     avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i
 
+If your board uses an `atmega32a` (e.g. on a jj40), the command is this (the extra code at the end sets the fuses correctly):
+
+	avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m
+
 You should see a couple of progress bars, then you should see:
 
     avrdude: verifying ...
diff --git a/util/bootloader_atmega32a_1_0_0.hex b/util/bootloader_atmega32a_1_0_0.hex
new file mode 100644
index 000000000..b35a310d5
Binary files /dev/null and b/util/bootloader_atmega32a_1_0_0.hex differ