fixed color detection routine in makefile
This commit is contained in:
IBNobody
parent
50621a2e6a
commit
1c2705eea5
@ -43,7 +43,7 @@
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
@ -66,7 +66,7 @@ BUILD_DIR = .build
|
||||
OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
|
||||
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# 0 = turn off optimization. s = optimize for size.
|
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||
OPT = s
|
||||
@ -161,10 +161,8 @@ CFLAGS += -fshort-enums
|
||||
CFLAGS += -fno-strict-aliasing
|
||||
# add color
|
||||
ifeq ($(COLOR),true)
|
||||
ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
|
||||
ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
|
||||
CFLAGS+= -fdiagnostics-color
|
||||
else ifeq ("$(shell echo "int main(){}" | $(CC) -fcolor-diagnostics -x c - -o /dev/null 2>&1)", "")
|
||||
CFLAGS+= -fcolor-diagnostics
|
||||
endif
|
||||
endif
|
||||
CFLAGS += -Wall
|
||||
@ -223,7 +221,7 @@ endif
|
||||
# for use in COFF files, additional information about filenames
|
||||
# and function names needs to be present in the assembler source
|
||||
# files -- see avr-libc docs [FIXME: not yet described there]
|
||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||
# dump that will be displayed for a given single line of source input.
|
||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
|
||||
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
@ -239,7 +237,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard printf version.
|
||||
PRINTF_LIB =
|
||||
PRINTF_LIB =
|
||||
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
||||
|
||||
@ -251,7 +249,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard scanf version.
|
||||
SCANF_LIB =
|
||||
SCANF_LIB =
|
||||
#SCANF_LIB = $(SCANF_LIB_MIN)
|
||||
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
||||
|
||||
@ -263,7 +261,7 @@ MATH_LIB = -lm
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRALIBDIRS =
|
||||
EXTRALIBDIRS =
|
||||
|
||||
|
||||
|
||||
@ -324,7 +322,7 @@ JTAG_DEV = /dev/com1
|
||||
DEBUG_PORT = 4242
|
||||
|
||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
||||
# just set to localhost unless doing some sort of crazy debugging when
|
||||
# just set to localhost unless doing some sort of crazy debugging when
|
||||
# avarice is running on a different computer.
|
||||
DEBUG_HOST = localhost
|
||||
|
||||
@ -358,7 +356,7 @@ endif
|
||||
MSG_ERRORS_NONE = Errors: none
|
||||
MSG_BEGIN = -------- begin --------
|
||||
MSG_END = -------- end --------
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_AFTER = Size after:
|
||||
MSG_COFF = Converting to AVR COFF:
|
||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||
@ -396,22 +394,22 @@ ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
|
||||
|
||||
# Default target.
|
||||
all:
|
||||
@$(MAKE) begin
|
||||
@$(MAKE) gccversion
|
||||
@$(MAKE) sizebefore
|
||||
all:
|
||||
@$(MAKE) begin
|
||||
@$(MAKE) gccversion
|
||||
@$(MAKE) sizebefore
|
||||
@$(MAKE) clean_list # force clean each time
|
||||
@$(MAKE) build
|
||||
@$(MAKE) sizeafter
|
||||
@$(MAKE) build
|
||||
@$(MAKE) sizeafter
|
||||
@$(MAKE) end
|
||||
|
||||
# Quick make that doesn't clean
|
||||
quick:
|
||||
@$(MAKE) begin
|
||||
@$(MAKE) gccversion
|
||||
@$(MAKE) sizebefore
|
||||
@$(MAKE) build
|
||||
@$(MAKE) sizeafter
|
||||
quick:
|
||||
@$(MAKE) begin
|
||||
@$(MAKE) gccversion
|
||||
@$(MAKE) sizebefore
|
||||
@$(MAKE) build
|
||||
@$(MAKE) sizeafter
|
||||
@$(MAKE) end
|
||||
|
||||
# Change the build target to build a HEX file or a library.
|
||||
@ -456,12 +454,12 @@ sizeafter:
|
||||
# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
|
||||
|
||||
# Display compiler version information.
|
||||
gccversion :
|
||||
gccversion :
|
||||
@$(SILENT) || $(CC) --version
|
||||
|
||||
|
||||
|
||||
# Program the device.
|
||||
# Program the device.
|
||||
program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
|
||||
$(PROGRAM_CMD)
|
||||
|
||||
@ -492,7 +490,7 @@ endif
|
||||
dfu-programmer $(MCU) erase
|
||||
dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
|
||||
dfu-start:
|
||||
dfu-programmer $(MCU) reset
|
||||
dfu-programmer $(MCU) start
|
||||
@ -514,9 +512,9 @@ endif
|
||||
|
||||
|
||||
# Generate avr-gdb config/init file which does the following:
|
||||
# define the reset signal, load the target file, connect to target, and set
|
||||
# define the reset signal, load the target file, connect to target, and set
|
||||
# a breakpoint at main().
|
||||
gdb-config:
|
||||
gdb-config:
|
||||
@$(REMOVE) $(GDBINIT_FILE)
|
||||
@echo define reset >> $(GDBINIT_FILE)
|
||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
||||
@ -618,7 +616,7 @@ $(OBJDIR)/%.o : %.c
|
||||
$(OBJDIR)/%.o : %.cpp
|
||||
@mkdir -p $(@D)
|
||||
@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
|
||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Compile: create assembler files from C source files.
|
||||
@ -642,7 +640,7 @@ $(OBJDIR)/%.o : %.S
|
||||
|
||||
# Create preprocessed source for use in sending a bug report.
|
||||
%.i : %.c
|
||||
$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
|
||||
$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
|
||||
|
||||
# Target: clean project.
|
||||
clean: begin clean_list end
|
||||
|
||||
Loading…
Reference in New Issue
Block a user