Initial commit.

10-auth.conf

@@ -0,0 +1,129 @@
+##
+## Authentication processes
+##
+
+# Disable LOGIN command and all other plaintext authentications unless
+# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
+# matches the local IP (ie. you're connecting from the same computer), the
+# connection is considered secure and plaintext authentication is allowed.
+#disable_plaintext_auth = yes
+disable_plaintext_auth = no
+
+# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
+# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
+#auth_cache_size = 0
+# Time to live for cached data. After TTL expires the cached record is no
+# longer used, *except* if the main database lookup returns internal failure.
+# We also try to handle password changes automatically: If user's previous
+# authentication was successful, but this one wasn't, the cache isn't used.
+# For now this works only with plaintext authentication.
+#auth_cache_ttl = 1 hour
+# TTL for negative hits (user not found, password mismatch).
+# 0 disables caching them completely.
+#auth_cache_negative_ttl = 1 hour
+
+# Space separated list of realms for SASL authentication mechanisms that need
+# them. You can leave it empty if you don't want to support multiple realms.
+# Many clients simply use the first one listed here, so keep the default realm
+# first.
+#auth_realms =
+
+# Default realm/domain to use if none was specified. This is used for both
+# SASL realms and appending @domain to username in plaintext logins.
+#auth_default_realm = 
+
+# List of allowed characters in username. If the user-given username contains
+# a character not listed in here, the login automatically fails. This is just
+# an extra check to make sure user can't exploit any potential quote escaping
+# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
+# set this value to empty.
+#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
+
+# Username character translations before it's looked up from databases. The
+# value contains series of from -> to characters. For example "#@/@" means
+# that '#' and '/' characters are translated to '@'.
+#auth_username_translation =
+
+# Username formatting before it's looked up from databases. You can use
+# the standard variables here, eg. %Lu would lowercase the username, %n would
+# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
+# "-AT-". This translation is done after auth_username_translation changes.
+#auth_username_format = %Lu
+auth_username_format = %n
+
+# If you want to allow master users to log in by specifying the master
+# username within the normal username string (ie. not using SASL mechanism's
+# support for it), you can specify the separator character here. The format
+# is then <username><separator><master username>. UW-IMAP uses "*" as the
+# separator, so that could be a good choice.
+#auth_master_user_separator =
+
+# Username to use for users logging in with ANONYMOUS SASL mechanism
+#auth_anonymous_username = anonymous
+
+# Maximum number of dovecot-auth worker processes. They're used to execute
+# blocking passdb and userdb queries (eg. MySQL and PAM). They're
+# automatically created and destroyed as needed.
+#auth_worker_max_count = 30
+
+# Host name to use in GSSAPI principal names. The default is to use the
+# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
+# entries.
+#auth_gssapi_hostname =
+
+# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
+# default (usually /etc/krb5.keytab) if not specified. You may need to change
+# the auth service to run as root to be able to read this file.
+#auth_krb5_keytab = 
+
+# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
+# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
+#auth_use_winbind = no
+
+# Path for Samba's ntlm_auth helper binary.
+#auth_winbind_helper_path = /usr/bin/ntlm_auth
+
+# Time to delay before replying to failed authentications.
+#auth_failure_delay = 2 secs
+
+# Require a valid SSL client certificate or the authentication fails.
+#auth_ssl_require_client_cert = no
+
+# Take the username from client's SSL certificate, using 
+# X509_NAME_get_text_by_NID() which returns the subject's DN's
+# CommonName. 
+#auth_ssl_username_from_cert = no
+
+# Space separated list of wanted authentication mechanisms:
+#   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
+#   gss-spnego
+# NOTE: See also disable_plaintext_auth setting.
+auth_mechanisms = plain
+
+##
+## Password and user databases
+##
+
+#
+# Password database is used to verify user's password (and nothing more).
+# You can have multiple passdbs and userdbs. This is useful if you want to
+# allow both system users (/etc/passwd) and virtual users to login without
+# duplicating the system users into virtual database.
+#
+# <doc/wiki/PasswordDatabase.txt>
+#
+# User database specifies where mails are located and what user/group IDs
+# own them. For single-UID configuration use "static" userdb.
+#
+# <doc/wiki/UserDatabase.txt>
+
+#!include auth-deny.conf.ext
+#!include auth-master.conf.ext
+
+#!include auth-system.conf.ext
+#!include auth-sql.conf.ext
+#!include auth-ldap.conf.ext
+!include auth-passwdfile.conf.ext
+#!include auth-checkpassword.conf.ext
+#!include auth-vpopmail.conf.ext
+#!include auth-static.conf.ext

10-logging.conf

@@ -0,0 +1,89 @@
+##
+## Log destination.
+##
+
+# Log file to use for error messages. "syslog" logs to syslog,
+# /dev/stderr logs to stderr.
+#log_path = syslog
+
+log_path = /dev/stderr
+
+# Log file to use for informational messages. Defaults to log_path.
+#info_log_path = 
+# Log file to use for debug messages. Defaults to info_log_path.
+#debug_log_path = 
+
+debug_log_path = /dev/stdout
+
+# Syslog facility to use if you're logging to syslog. Usually if you don't
+# want to use "mail", you'll use local0..local7. Also other standard
+# facilities are supported.
+#syslog_facility = mail
+
+##
+## Logging verbosity and debugging.
+##
+
+# Log unsuccessful authentication attempts and the reasons why they failed.
+#auth_verbose = no
+auth_verbose = yes
+
+# In case of password mismatches, log the attempted password. Valid values are
+# no, plain and sha1. sha1 can be useful for detecting brute force password
+# attempts vs. user simply trying the same password over and over again.
+#auth_verbose_passwords = no
+
+# Even more verbose logging for debugging purposes. Shows for example SQL
+# queries.
+#auth_debug = no
+
+# In case of password mismatches, log the passwords and used scheme so the
+# problem can be debugged. Enabling this also enables auth_debug.
+#auth_debug_passwords = no
+
+# Enable mail process debugging. This can help you figure out why Dovecot
+# isn't finding your mails.
+#mail_debug = no
+mail_debug = yes
+
+# Show protocol level SSL errors.
+#verbose_ssl = no
+
+# mail_log plugin provides more event logging for mail processes.
+plugin {
+  # Events to log. Also available: flag_change append
+  #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename
+  # Available fields: uid, box, msgid, from, subject, size, vsize, flags
+  # size and vsize are available only for expunge and copy events.
+  #mail_log_fields = uid box msgid size
+}
+
+##
+## Log formatting.
+##
+
+# Prefix for each line written to log file. % codes are in strftime(3)
+# format.
+#log_timestamp = "%b %d %H:%M:%S "
+
+# Space-separated list of elements we want to log. The elements which have
+# a non-empty variable value are joined together to form a comma-separated
+# string.
+#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c
+
+# Login log format. %$ contains login_log_format_elements string, %s contains
+# the data we want to log.
+#login_log_format = %$: %s
+ 
+# Log prefix for mail processes. See doc/wiki/Variables.txt for list of
+# possible variables you can use.
+#mail_log_prefix = "%s(%u): "
+
+# Format to use for logging mail deliveries. You can use variables:
+#  %$ - Delivery status message (e.g. "saved to INBOX")
+#  %m - Message-ID
+#  %s - Subject
+#  %f - From address
+#  %p - Physical size
+#  %w - Virtual size
+#deliver_log_format = msgid=%m: %$

10-master.conf

@@ -0,0 +1,121 @@
+default_process_limit = 200
+#default_client_limit = 1000
+
+# Default VSZ (virtual memory size) limit for service processes. This is mainly
+# intended to catch and kill processes that leak memory before they eat up
+# everything.
+#default_vsz_limit = 256M
+
+# Login user is internally used by login processes. This is the most untrusted
+# user in Dovecot system. It shouldn't have access to anything at all.
+#default_login_user = dovenull
+
+# Internal user is used by unprivileged processes. It should be separate from
+# login user, so that login processes can't disturb other processes.
+#default_internal_user = dovecot
+
+service imap-login {
+  inet_listener imap {
+    #port = 143
+    #disable non-ssl imap
+    #port = 0
+  }
+  inet_listener imaps {
+    #port = 993
+    #ssl = yes
+  }
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = $default_vsz_limit
+}
+
+service pop3-login {
+  inet_listener pop3 {
+    #port = 110
+  }
+  inet_listener pop3s {
+    #port = 995
+    #ssl = yes
+  }
+}
+
+service lmtp {
+  unix_listener lmtp {
+    #mode = 0666
+  }
+
+  # Create inet listener only if you can't use the above UNIX socket
+  inet_listener lmtp {
+    # Avoid making LMTP visible for the entire internet
+    #address = 127.0.0.1
+    port = 24
+  }
+}
+
+service imap {
+  # Most of the memory goes to mmap()ing files. You may need to increase this
+  # limit if you have huge mailboxes.
+  #vsz_limit = $default_vsz_limit
+
+  # Max. number of IMAP processes (connections)
+  #process_limit = 1024
+}
+
+service pop3 {
+  # Max. number of POP3 processes (connections)
+  #process_limit = 1024
+}
+
+service auth {
+  # auth_socket_path points to this userdb socket by default. It's typically
+  # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have
+  # full permissions to this socket are able to get a list of all usernames and
+  # get the results of everyone's userdb lookups.
+  #
+  # The default 0666 mode allows anyone to connect to the socket, but the
+  # userdb lookups will succeed only if the userdb returns an "uid" field that
+  # matches the caller process's UID. Also if caller's uid or gid matches the
+  # socket's uid or gid the lookup succeeds. Anything else causes a failure.
+  #
+  # To give the caller full permissions to lookup all users, set the mode to
+  # something else than 0666 and Dovecot lets the kernel enforce the
+  # permissions (e.g. 0777 allows everyone full permissions).
+  unix_listener auth-userdb {
+    #mode = 0666
+    #user = 
+    #group = 
+  }
+
+  # Postfix smtp-auth
+  #unix_listener /var/spool/postfix/private/auth {
+  #  mode = 0666
+  #}
+
+  # Auth process is run as this user.
+  #user = $default_internal_user
+}
+
+service auth-worker {
+  # Auth worker process is run as root by default, so that it can access
+  # /etc/shadow. If this isn't necessary, the user should be changed to
+  # $default_internal_user.
+  #user = root
+}
+
+service dict {
+  # If dict proxy is used, mail processes should have access to its socket.
+  # For example: mode=0660, group=vmail and global mail_access_groups=vmail
+  unix_listener dict {
+    #mode = 0600
+    #user = 
+    #group = 
+  }
+}

20-lmtp.conf

@@ -0,0 +1,16 @@
+##
+### LMTP specific settings
+###
+#
+## Support proxying to other LMTP/SMTP servers by performing passdb lookups.
+##lmtp_proxy = no
+#
+## When recipient address includes the detail (e.g. user+detail), try to save
+## the mail to the detail mailbox. See also recipient_delimiter and
+## lda_mailbox_autocreate settings.
+##lmtp_save_to_detail_mailbox = no
+#
+protocol lmtp {
+  # Space separated list of plugins to load (default is global mail_plugins).
+  mail_plugins = $mail_plugins sieve
+}

Dockerfile

@@ -0,0 +1,20 @@
+FROM debian:wheezy
+MAINTAINER yohan <783b8c87@scimetis.net>
+ENV DEBIAN_FRONTEND noninteractive
+RUN echo "deb http://http.debian.net/debian wheezy-backports main" >> /etc/apt/sources.list
+RUN apt-get update && apt-get -y install dovecot-core dovecot-imapd dovecot-managesieved dovecot-sieve dovecot-solr dovecot-antispam dovecot-lmtpd
+# IMAPS
+EXPOSE 993
+# MANAGESIEVE
+EXPOSE 4190
+# LMTP
+#EXPOSE 24
+COPY 10-master.conf /etc/dovecot/conf.d/
+COPY 10-logging.conf /etc/dovecot/conf.d/
+COPY 10-auth.conf /etc/dovecot/conf.d/
+COPY 15-lda.conf /etc/dovecot/conf.d/
+COPY 20-lmtp.conf /etc/dovecot/conf.d/
+COPY users /etc/dovecot/
+RUN mkdir /home/yohan
+RUN chown -R 1000:1000 /home/yohan
+ENTRYPOINT ["/usr/sbin/dovecot", "-F", "-c", "/etc/dovecot/dovecot.conf"]

build

@@ -0,0 +1 @@
+docker build -t dovecot .

dovecot.conf

@@ -0,0 +1,100 @@
+## Dovecot configuration file
+
+# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration
+
+# "doveconf -n" command gives a clean output of the changed settings. Use it
+# instead of copy&pasting files when posting to the Dovecot mailing list.
+
+# '#' character and everything after it is treated as comments. Extra spaces
+# and tabs are ignored. If you want to use either of these explicitly, put the
+# value inside quotes, eg.: key = "# char and trailing whitespace  "
+
+# Default values are shown for each setting, it's not required to uncomment
+# those. These are exceptions to this though: No sections (e.g. namespace {})
+# or plugin settings are added by default, they're listed only as examples.
+# Paths are also just examples with the real defaults being based on configure
+# options. The paths listed here are for configure --prefix=/usr
+# --sysconfdir=/etc --localstatedir=/var
+
+protocols = imap lmtp
+
+# Enable installed protocols
+!include_try /usr/share/dovecot/protocols.d/*.protocol
+
+# A comma separated list of IPs or hosts where to listen in for connections. 
+# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
+# If you want to specify non-default ports or anything more complex,
+# edit conf.d/master.conf.
+#listen = *, ::
+
+# Base directory where to store runtime data.
+#base_dir = /var/run/dovecot/
+
+# Name of this instance. In multi-instance setup doveadm and other commands
+# can use -i <instance_name> to select which instance is used (an alternative
+# to -c <config_path>). The instance name is also added to Dovecot processes
+# in ps output.
+#instance_name = dovecot
+
+# Greeting message for clients.
+#login_greeting = Dovecot ready.
+
+# Space separated list of trusted network ranges. Connections from these
+# IPs are allowed to override their IP addresses and ports (for logging and
+# for authentication checks). disable_plaintext_auth is also ignored for
+# these networks. Typically you'd specify your IMAP proxy servers here.
+#login_trusted_networks =
+
+# Sepace separated list of login access check sockets (e.g. tcpwrap)
+#login_access_sockets = 
+
+# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
+# proxying. This isn't necessary normally, but may be useful if the destination
+# IP is e.g. a load balancer's IP.
+#auth_proxy_self =
+
+# Show more verbose process titles (in ps). Currently shows user name and
+# IP address. Useful for seeing who are actually using the IMAP processes
+# (eg. shared mailboxes or if same uid is used for multiple accounts).
+#verbose_proctitle = no
+
+# Should all processes be killed when Dovecot master process shuts down.
+# Setting this to "no" means that Dovecot can be upgraded without
+# forcing existing client connections to close (although that could also be
+# a problem if the upgrade is e.g. because of a security fix).
+#shutdown_clients = yes
+
+# If non-zero, run mail commands via this many connections to doveadm server,
+# instead of running them directly in the same process.
+#doveadm_worker_count = 0
+# UNIX socket or host:port used for connecting to doveadm server
+#doveadm_socket_path = doveadm-server
+
+# Space separated list of environment variables that are preserved on Dovecot
+# startup and passed down to all of its child processes. You can also give
+# key=value pairs to always set specific settings.
+#import_environment = TZ
+
+##
+## Dictionary server settings
+##
+
+# Dictionary can be used to store key=value lists. This is used by several
+# plugins. The dictionary can be accessed either directly or though a
+# dictionary server. The following dict block maps dictionary names to URIs
+# when the server is used. These can then be referenced using URIs in format
+# "proxy::<name>".
+
+dict {
+  #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
+  #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
+}
+
+# Most of the actual configuration gets included below. The filenames are
+# first sorted by their ASCII value and parsed in that order. The 00-prefixes
+# in filenames are intended to make it easier to understand the ordering.
+!include conf.d/*.conf
+
+# A config file can also tried to be included without giving an error if
+# it's not found:
+!include_try local.conf